A
ERATE
; ®
MarineLINE' 784
APPLICATION PROCEDURES FOR
COATING IMO CLASS I, WH
PRODUCT / CHEMICAL TANKERS
Advanced Polymer Coatings, Inc.
P.0. Box 269 - 951 Jaycox Road
Avon, Ohio 44011 USA
TEL: +01 440-937-6218
FAX: +01 440-937-5046
www.adv-polymer.com
snus
fey. 120 4/2016TABLE OF CONTENTS
ee ee ssnsnnsavaneustOeEse De SIDNIDNTONEEEEEDOOOOOOOOSOO ear ae
PAGE NO.
SECTION
10 SCOPE
zy GENERAL INFORMATION. 1
24 Lighting z
ea Rain Protection 1
23 Staging _ 1
2.4 Surface Preparation 2
2.5 ‘Surface Cleaning 3
as Dehumidification Equipment and Ventilation 4
2.7 Cargo Pumps and Steam Coils 6
3.0 "APPLICATION OF THE LINING SYSTEM 6
3.1 General Notes Prior to Coating 6
32 Mixing 1
33 Thinning _ 7
34 Screening fl
35 Pot Life 8
36 Spray Equipment 8
37 Stripe Coating, 8
3.8 ‘Application Requirements for MarineLine 8
39 Recoat Times 10
3.10 Coating Sequence 10
3.11 Coating Integrity Inspection Procedure 1
3.12 Repair Procedure 12
3.13 Curing Procedures 12
3.14 Solvent Testing _ 12
315 Hardness Testing _ a
3.16 Inspection Criteria ia
3.17 General Notes ia
3.17.10 Safety Equipment 15
rea
fev. 1.20 4/20161.0
Md
1.2
13
scor!
The coatings are to be applied to all internal surfaces of each tank designated above,
including: Bulkheads, Deck and Shell Plating, Framing, Girders and Stiffeners,
Brackets, Expansion Trunks, Ladders and Ladder Rungs and all other internal structures
and fittings as required.
In order to accomplish this total coating, ALL existing tank coatings shall be removed,
The Shipyard or its subcontractors must not deviate from these specifications without
the written consent of the MarineLine's Inspector, unless APC is supplving a full turn
key job,
Shipyard shall supply solvents, labor, staging, lighting, blasting equipment,