JOBHERO
> RESUMES > ENGINEERING > POWER ENGINEER
EXPERT APPROVED
Handpicked by resume experts based on rigorous standards
DIVERSE EXAMPLES
Tailored for various backgrounds and experience levels
Power Engineers design the utility systems that facilities utilize by conceiving, directing, and
implementing power systems projects. Sample resumes for this position highlight such skills as
de ning all requirements and speci cations for a company upgrade by analyzing their existing
equipment and future needs, researching dozens of systems from various manufacturers and
coordinating vendor demonstrations and testing, and creating detailed product comparisons of a
dozen units that meet basic criteria. Often, applicants need not list any postsecondary education on
their resumes, as employers will train them on the job.
Looking for cover letter ideas? See our sample Power Engineer Cover Letter.
1 Power Engineer
Adjusted controls on equipment to improve ef ciency of boilers, and water treatment plant and to
compensate for mill requirements, while overseeing capacity levels throughout the system.
Executed daily operations of a power boiler, a recovery boiler, and a water treatment plant.
Supplied steam, heat, and water for steam plant, water plant and pulp mill processes.
Monitored control and switchboard gauges to determine steam, heat, and water distribution met
speci cations.
Compiled and recorded operational data on speci ed forms.
Trained control room operators, and junior operators in recovery boiler, steam plant, and water
treatment plant operation.
(C.R.O.) Supervised and managed a shift under the direction of a shift engineer and chief
engineer.
Successfully managed a four-to- ve person team operating a 150,000 lbs. /hr. hog fuel power
boiler, an Incinerator black liquor boiler, and a water treatment plant in a closed loop system.
Candidate Info
Years In
15 Workforce
Years
http://www.jobhero.com/resume-samples/power-engineer 1/7
8/16/2017 Power Engineer Resume Samples | JobHero
At This Job
13
C Engineering Program
C Certi cate
2 Power Engineer
Designed the integration of telecommunication equipment into existing and new facilities
Designed and implemented AT&T Distributed Monitored Alarms and Control System (DMACS) to
monitor telecommunication equipment on a token ring Local Area Network.
Performed site surveys through out the country as required for the purpose of preparing
quotations and/or laying out project requirements for AT&T.
Managed individual projects to ensure that each will maintain pro tability, and complete on time
and with a high acceptable level of quality.
Created and updated of ce records documentation for customers, installation speci cation and
Bill of Material as required for each project.
Created job speci cations package and (MOP) for scope of work and nal documentation package
for customer.
Candidate Info
Years In
7 Workforce
Years
3 At This Job
3 Power Engineer
Contributed to the ongoing success of [company name] by providing EEE componentand system
engineering expertise across all product categories.
Developed state-of-the-art solid-state interrupters and uninterruptible power supplies for both
military and commercial applications.
Major contribution to L3 success in their eld by solving producibility problems through the use
of standard parts, non-standard parts, new technology parts and resolving material review board
issues.
Major system upgrade provided through use of COTS components to satisfy both customer and
system life cycle requirements.
Consultant to Reliability and Maintainability organization regarding component electrical stress
and thermal stress evaluations.
http://www.jobhero.com/resume-samples/power-engineer 2/7
8/16/2017 Power Engineer Resume Samples | JobHero
Solved design and component related system problems and established test veri cation
protocols.
Candidate Info
Years In
18 Workforce
Years
2 At This Job
BE Electrical Engineering
Experienced zero outages during my time on the FAA contract and as lead support.
Managed the creation of a web-based system for quarterly and yearly preventative maintenance
reports, later reported to the external customer.
Presented DC-power project scope to the FAA of cials for a 10 year, $1B contract.
Assisted with the development of DC-power distribution systems to support FAA communications.
Diplomatic support to the FAA during the 2003 North East blackout, where we experienced zero
down time.
Managed the replacement of over 4000 batteries to meet the approved schedule and cost
baselines.
Trained internal eld technicians on procedures and preventative maintenance, to ensure quality
and performance standards.
Candidate Info
Years In
7 Workforce
Years
7 At This Job
Pmp-Project Management
5 Power Engineer
Reviewed overhead and underground Medium Voltage designs for residential and commercial
customers.
http://www.jobhero.com/resume-samples/power-engineer 3/7
8/16/2017 Power Engineer Resume Samples | JobHero
Prepared electrical calculations including cable, transformer and breaker sizing and electrical
panel loading.
Collected, reviewed, updated and analyzed system parameters and load data of different MV
substations for planning, design and system Improvements.
Prepared single line diagrams using Micro Station for Medium Voltage.
Prepared a forecast of Medium Voltage materials.
Prepared weekly reports of critical and shortage of materials.
Designed and speci ed electrical distribution System.
Candidate Info
Years In
3 Workforce
Years
2 At This Job
BS Electrical Engineering
Provided project identi cation services for borrowers, project concepts, cost estimates, and
economic analysis.
Prepared Project Appraisals for Bank's Board.
Provided procurement planning and assistance.
Supervised borrowers' design and speci cation efforts.
Supervised project implementation and reported progress to Bank's Board
Prepared project evaluations and completion reports for Board, and estimated economic bene ts
of projects
Candidate Info
Years In
20 Workforce
Years
7 At This Job
Energy Economics
Speci ed size and type of generators and ATS/ MTS to be used at wireless sites.
Designed and maintained AC & DC power systems for Qwest Central Of ces.
Managed power installation and upgrade projects.
Interfaced with the switch, transport, and access groups to determine power requirements. This
included speci cation for the addition of batteries, recti ers, PBDs, BDFBs, Generators, HVAC, AC,
re/alarm systems, and building structural
Prepared detailed MOPs, performed test and acceptance and QA upon project completion.
Assisted in locating equipment vendor and implementing a SCADA system in Qwest power plants.
Implemented new vendor RFQ processes.
Candidate Info
Years In
6 Workforce
Years
2 At This Job
8 DC Power Engineer
Performed site surveys at head ends and hubs to install new equipment from vendors. From these
surveys, RFP and SOW's are created to send to the prospective vendors for bidding on installation of
the product and upgraded [company name] records to industry standards
Candidate Info
Years In
43 Workforce
Years
http://www.jobhero.com/resume-samples/power-engineer 5/7
8/16/2017 Power Engineer Resume Samples | JobHero
At This Job
2
Communications Electronics Technology
9 DC Power Engineer
Designed and implemented new charging work ow processes and increased the number of
charging stations by four, which resulted in productivity increase of 30%.
Wrote customer proposals and bids, followed-up with prospective clients to answer questions
and close sales agreements.
Revised company operating procedures for easier work ow.
Emergency work with the Cable and Wireless Amsterdam and London Node turn up.
Candidate Info
Years In
4 Workforce
Years
4 At This Job
BS Chemical Engineering
Candidate Info
Years In
8 Workforce
Years
5 At This Job
BS Chemical Engineering
http://www.jobhero.com/resume-samples/power-engineer 6/7
8/16/2017 Power Engineer Resume Samples | JobHero
SUBMIT
Senior Engineer
Security Engineer
Safety Engineer
Resident Engineer
Reservoir Engineer
Rf Design Engineer
BROWSE MORE
http://www.jobhero.com/resume-samples/power-engineer 7/7