Fixed Position
Brackets that are fixed height / length (Tracom) are formed by rigidly welding two pieces of stainless steel
tube together. The bracket is secured at the top / side of the flume (either on the top flange or the concrete
surrounding the flume).
There are no adjustments that can be made to the sensor height. Depending upon the sensor holder design,
the sensor may be able to be slid down the horizontal arm of the bracket by some small amount. These
brackets are not field adjustable.
Problems with the fixed design include the likelihood that the sensor will be mounted too close to the flume
sidewall and the lack of adjustment to accommodate different sensor beam angles or deadbands.
http://www.openchannelflow.com/blog/article/using-ultrasonic-flow-meters-with-flumes