com/global/us
Industrial Flowmeters
High-accuracy solutions for steam, gas
and liquid flow applications
1
F l o w M e a s u r e m e n t S o l u t i o n s
2
spiraxsarco.com/global/us
Low-maintenance, rugged industrial flowmeters that give you the precision data you
need to:
Boost Productivity
Improve Efficiency
Cut Energy Use
Ramp Up Sustainability
3
F l o w M e a s u r e m e n t S o l u t i o n s
VLM20
(Inline Vortex) 2
TVA
(Target Variable Area)
ILVA
(Inline Variable Area)
GILFLO
MTI10/MTL10
(Thermal Mass) 3
3
1: Must be conductive fluid > 5s/cm 2: Low viscosity (<3 cP) 3: Dry and Clean Gas or Air
GILFLO
MTI10/MTL10
(Thermal Mass)
4
spiraxsarco.com/global/us
5
F l o w M e a s u r e m e n t S o l u t i o n s
The RIM20 is suitable for hot tapping, which means it can be As a Vortex meter, VIM20 has no moving parts, resulting in
installed and maintained under full flow conditions, without highly reliable operation.
shutdown.
Additional specs:
Additional specs: Output Options: Modbus RTU, BACnet MS/TP, HART,
Output Options: Modbus RTU, BACnet MS/TP, HART, 4-20mA, pulse
4-20mA, pulse Accuracy: (gas & steam) 2.0% of rate; (liquids): 1.5% of rate
Mass flow accuracy (steam/gas): 2.0% of rate; Measures liquid flow velocity down to 1.0 ft/sec (0.3 m/sec)
(liquids):1.5% of rate Media: Liquids, steam, gas
Measures liquid flow velocity down to 0.5 ft/sec (0.15 m/sec)
Media: Liquids, steam, gas
6
spiraxsarco.com/global/us
Additional specs:
Output Options: Modbus RTU, BACnet MS/TP, HART,
4-20mA, pulse
Mass flow accuracy (steam/gas): 1.5% of rate;
(liquids):1% of rate
Measures liquid flow velocity down to 1 ft/sec (0.3 m/sec)
Media: Liquids, steam, gas
7
F l o w M e a s u r e m e n t S o l u t i o n s
Target Variable Area (TVA) Meter Inline Variable Area (ILVA) Meter
The Target Variable Area (TVA) Meter is specifically designed The Inline Variable Area (ILVA) Meter accurately measures
for accurate measurement in saturated steam applications. widely varying flows, making it ideal for applications where
Its critical surfaces resist erosion caused by water droplets. flow rate fluctuates throughout the year. It is suitable for all
For proper installation, the TVA requires only a short length types of industrial fluids.
of straight piping six pipe diameters upstream and three
The ILVA meter can be installed in compact spaces because
diameters downstream from the meter.
it needs only six pipe diameters upstream from and three
The TVAs built-in density compensation feature provides diameters downstream from the meter. Precision cone profiles
accurate measurements without a separate flow computer. the flow giving unrivaled turndown, for a more accurate flow
measurement.
Additional specs:
Available in 2, 3 and 4 sizes (DN50, DN80, DN100) The ILVAs compact design, installed between two flanges,
50:1 turndown ratio provides accuracy over a wide flow provides outstanding performance in a small footprint.
range
Additional specs:
Wafer-type design for easy installation
Accuracy: 1.0% of flow rate (between 100% and 5% of
Integral display screen with keypad for simple setup and
range)
easy viewing of indicators such as flow rate, total flow,
Repeatability: 0.25% of flow rate
pressure and temperature
Factory calibrated to 0.1% FSD (between 1% and 5%
Media: Saturated steam
of range)
Nominal pressure drop of 200 wg at maximum range
Turndown: Up to 100:1 compensation for all fluids with
optional accessories
Media: Liquids, steam and gas
8
spiraxsarco.com/global/us
9
F l o w M e a s u r e m e n t S o l u t i o n s
USA
case study
Bottom line: Better measurements lead to cost savings and greater control.
10
spiraxsarco.com/global/us
11
F l o w M e a s u r e m e n t S o l u t i o n s