P-OkiPL1
PROJECT
[OKIPL1] Document No. P-OkiPL1-100-01-FRM-XXX
Revision 00
Page 1 of 3
Isolation Procedure
Issue Date February 10, 2016
ISOLATION PROCEDURE
1
OKI PULP & PAPER MILL Project No. P-OkiPL1
PROJECT
[OKIPL1] Document No. P-OkiPL1-100-01-FRM-XXX
Revision 00
Page 2 of 3
Isolation Procedure
Issue Date February 10, 2016
CONTENTS
1. OBJECTIVE
2. SCOPE
3. DEFINITIONS
4. GENERAL
2
OKI PULP & PAPER MILL Project No. P-OkiPL1
PROJECT
[OKIPL1] Document No. P-OkiPL1-100-01-FRM-XXX
Revision 00
Page 3 of 3
Isolation Procedure
Issue Date February 10, 2016
1. OBJECTIVE
The objective of this Instruction is to set down the procedure for isolating
Plant/Apparatus involving isolations required from more than one Safety
Controller.
2. SCOPE
3. DEFINITIONS
4. GENERAL
4.1 Prior to any isolation being applied, the Site Manager's Nominee will
assess the impact on the system as a whole and authorise the release
of the Plant or Apparatus from service.
4.2 Each Safety Controller will isolate and lock off the Plant or
Apparatus within his defined scope and hand the keys and a signed
safety precautions list to the Safety Controller preparing the
Safety Document.