Anda di halaman 1dari 17

Contract No.

: PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

PIPEWORKS AND VALVES


1 PART 1 - EARTHWORKS

1.1 SITE CLEARANCE

Clear the site of all undergrowths and trees including


the removal and disposal of all trees, stumps and roots
A ha 12 0.42 0.1770 0.59
as directed by the S.O.'s representatives. (Area to be
measured on plan)
Strip top soil of average depth of at least 150mm
including setting aside for re-use or disposal off the site
B ha 12 0.11 0.0537 0.16
as directed by the S.O.'s representatives. (Area to be
measured on plan)
Sub total 0.00 0.00
1.2 EXCAVATION 0.00% 0.00
0.00% 0.00
1.2.1 Bulk Excavation 0.00% 0.00
In cut areas within the pipeline route as shown in the
A m3 10,000 578.16 0.00 578.16
drawings. Rate to include disposal off site
In cut areas within the pipeline route as shown in the
B m3 4,000 2852.23 4946.81 7799.04
drawings. Rate to include use for filling
For removal of unsuitable material as directed by the
C S.O. rate to include refilling of excavation with m3 1,500 1028.20 0.00 1028.20
compacted approved suitable material
Extra over item 1.2.1 A and B above for excavation in
D m3 3,000 0.00 0.00 0.00
rock

1.2.2 Trench Excavation

1.2.2.1 For 2300 - 2500mm DN pipes and specials


A To depth not exceeding 4.5m m 9,000 0.00 0.00 0.00
B In trenches of depth > 4.5m - 6.0m m 2,600 429.44 101.15 530.59
Road/Public area 63.48 0.00 63.48
C In trenches of depth > 6.0m - 7.5m m 360 0.00 63.63 63.63
Road/Public area 0.00 0.00
D In trenches of depth > 7.5m - 9.0m m 10 0.00 0.00 0.00
Road/Public area 0.00 0.00
E In trenches of depth > 9.0m - 10.5m m 10 0.00 0.00 0.00
Road/Public area 0.00 0.00
F In trenches of depth > 10.5m - 12.0m m 10 0.00 0.00 0.00
Road/Public area 0.00 0.00
0.00 0.00
1.2.2.2 For 2000 - 2200mm DN pipes and specials 0.00% 0.00
A To depth not exceeding 4.0m m 10 0.00 0.00 0.00
B In trenches of depth > 4.0m - 5.5m m 25 0.00 0.00 0.00
C In trenches of depth > 5.5m - 7.0m m 10 0.00 0.00 0.00
D In trenches of depth > 7.0m - 8.5m m 10 0.00 0.00 0.00
0.00 0.00
1.2.2.3 For 1700 - 1950mm DN pipes and specials 0.00% 0.00
A To depth not exceeding 3.5m m 10 0.00 0.00 0.00
B In trenches of depth > 3.5m - 5.0m m 25 0.00 0.00 0.00

Page 1 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

C In trenches of depth > 5.0m - 6.5m m 5 0.00 0.00 0.00


0.00 0.00
1.2.2.4 For 1400 - 1600mm DN pipes and specials 0.00% 0.00
A To depth not exceeding 3.0m m 5 0.00 0.00 0.00
B In trenches of depth > 3.0m - 4.5m m 20 0.00 0.00 0.00
C In trenches of depth > 4.5m - 6.0m m 25 0.00 0.00 0.00
0.00 0.00
1.2.2.5 For 200 - 800mm DN pipes and specials 0.00% 0.00
A To depth not exceeding 2.0m m 250 0.00 0.00 0.00
B In trenches of depth > 2.0m - 3.5m m 250 0.00 0.00 0.00
C In trenches of depth > 3.5m - 5.0m m 200 0.00 0.00 0.00
D In trenches of depth > 5.0m - 6.5m m 100 0.00 0.00 0.00
E In trenches of depth > 6.5m - 8.0m m 20 0.00 0.00 0.00
F In trenches of depth > 8.0m - 9.5m m 10 0.00 0.00 0.00
G In trenches of depth > 9.5m - 11.0m m 10 0.00 0.00 0.00
H In trenches of depth > 11.0m - 12.5m m 10 0.00 0.00 0.00

Extra over item 1.2.2.1 A to F, item 1.2.2.2 A to D, item


J 1.2.2.3 A to C, item 1.2.2.4 A to C and item 1.2.2.5 A to m2 26,735 266.60 0.00 266.60
H above trench excavation in metalled road

Ditto for trench excavation in tracks, gravel roads and


K m2 100 0.00 0.00 0.00
earth roads, Rate to include reinstatement
Ditto for crossing hedges, fences and walls. Rate to
L include demolition, replacement of fences and walls, m2 425 0.00 186.08 186.08
reinstatement and reconstruction
Ditto for crossing under water courses and earth drains
M m2 100 0.00 0.00 0.00
of all sizes. Rate to include reinstatement

Page 2 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

Ditto for crossing under concrete drains and culverts.


N m2 2,060 0.00 69.99 69.99
Rate to include reinstatement
P Ditto for excavation in rock m3 3,000 0.00 210.72 210.72
For removal of unsuitable material beyond the limits of
trench excavationas directed by the S.O. Rate to
Q m3 1,000 0.00 0.00 0.00
include refilling of excavation with compacted approved
suitable material
Ditto but for refilling excavation with Grade C20
R m3 100 0.00 0.00 0.00
concrete
1.2.3 Incidental Excavation 0.00% 0.00
In all materials below original and beyond limits of
0.00% 0.00
bulk excavation and trench excavation
For valve, flowmeter and washout chambers, outfall
chambers, thrust and anchor blocks and supports for
A m3 2,900 0.00 0.00 0.00
pipes. Rate to include refilling and restoration of
surfaces

B Extra over item 1.2.3 A above for excavation in rock m3 50 0.00 0.00 0.00

For removal of unsuitable material beyond the limits of


incidental excavation as directed by the S.O. Rate to
C m3 100 0.00 0.00 0.00
include refilling of excavation with compacted approved
suitable material
Ditto but for refilling excavation with Grade C20
D m3 100 0.00 0.00 0.00
concrete
Sub total 0.00 0.00
0.00 0.00
1.3 FILLING 0.00% 0.00

Fill, spread and compact approved suitable excavated


material from Item 1.2.1 B to fill area within the pipeline
route as shown in the drawing or as directed by the
A m3 2,500 1726.51 495.73 2222.23
S.O. Rate to include forming slopes and berms.
(Measurements will be based on volume of compacted
fill within the limits as shown in the drawings)

Supply, fill, spread and compact approved imported fill


material to pipe trenches as specified or as directed by
B m3 100 0.00 0.00 0.00
the S.O. Rate to include all necessary vertical stop
ends
Supply, fill, spread and compact approved sand to pipe
C trenches as specified or as directed by the S.O. Rate m3 99,050 1474.75 720.77 2195.52
to include all necessary vertical stop ends
Sub total 0.00 0.00
0.00 0.00
1.4 TOP SOILING AND TURFING 0.00% 0.00
Supply and spread top soil to a depth of 100mm and
A m2 23,000 0.00 0.00 0.00
close turfing any inclination
Supply and spread top soil to a depth of 100mm and
B m2 16,000 0.00 0.00 0.00
spot turfing at flat ground area.
Sub total 0.00 0.00
0.00 0.00
1.5 RESTORATION OF METALLED ROAD 0.00% 0.00
0.00% 0.00
1.5.1 Temporary Road Reinstatement 0.00% 0.00

Page 3 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

Supply, spread and compact pipe trenches with crusher


run granite not exceeding 40mm size to original
A thickness or a minimum of 300mm. Rate to include all m2 37,600 235.20 440.58 675.78
necessary vertical stop ends and compliance with the
requirement of local authorities
Ditto with binder course to original thickness or a
minimum of 60mm. Rate to include prime coat, all
B m2 37,600 552.05 123.73 675.78
necessary vertical stop ends and compliance with the
requirement of local authorities.
Ditto with wearing course to original thickness or a
minimum of 40mm. Rate to include tack coat, all
C m2 37,600 0.00 675.78 675.78
necessary vertical stop ends and compliance with the
requirement of local authorities
0.00 0.00
1.5.2 Final Road Reinstatement 0.00% 0.00
Milling of the top 50mm thick of pavement surfaces of
A the road along side of the pipe trenching route including m2 121,000 0.00 0.00 0.00
disposal of waste material.
Lay 50mm thick wearing course inclusive of tack
coating and compaction. Rate to include tack coat, all
B m2 121,000 0.00 0.00 0.00
necessary vertical stop ends and compliance with the
requirement of local authorities

Page 4 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

Reinstatement of road marking with thermoplastic


material not exceeding 150mm width (i.e. zebra
C crossing, road line, edge line, reflective devices, etc.) m 18,750 0.00 0.00 0.00
and compliance with the requirement of local
authorities.

Reinstatement of road marking with road marking paint


not exceeding 150mm width (i.e. zebra crossing, road
D m 11,250 0.00 0.00 0.00
line, edge line, reflective device, ets.) and compliance
with the requirement of local authorities

Sub total 0.00 0.00


0.00 0.00
2 PART 2 - MILD STEEL PIPES 0.00% 0.00
0.00% 0.00
2.1 PIPEWORK UNDERGROUND 0.00% 0.00
0.00% 0.00
2.1.1 Pipe Laying and Fixing 0.00% 0.00
0.00% 0.00
2.1.1.1 Underground Straight Pipes 0.00% 0.00
0.00% 0.00
2.1.1.1.1 Spigot and Socket ended pipes in standard lengths 0.00% 0.00
A 2500mm DN Pipes m 11,375 415.725 109.150 524.88
0.00 0.00
2.1.1.1.2 Plain ended pipes in standard and cut lengths 0.00% 0.00
A 2500mm DN Pipes m 149 6.92 0.10 7.02
0.00 0.00
2.1.1.1.3 Plain ended pipes in standard and cut lengths 0.00% 0.00
A 1500mm DN Pipes m 40 0.00 0.00 0.00
B 800mm DN Pipes m 40 0.00 0.00 0.00
C 500mm DN Pipes m 40 0.00 0.00 0.00
D 450mm DN Pipes m 100 0.00 0.00 0.00
0.00 0.00
2.1.1.1.4 Plain ended pipes in standard and cut lengths 0.00% 0.00
A 400mm DN Pipes m 750 0.00 0.00 0.00
B 250mm DN Pipes m 20 0.00 0.00 0.00
0.00 0.00
2.1.1.2 Specials 0.00% 0.00
The dimensions and types of specials are as shown
0.00% 0.00
on drawings
0.00% 0.00
2.1.1.2.1 Plain ended straight pipes 0.00% 0.00
A 1500mm DN x 2300mm long with integral puddle flange nr 1 0.00 0.00 0.00

B 1500mm DN x 2000mm long with integral puddle flange nr 1 0.00 0.00 0.00

C 800mm DN x 2300mm long with integral puddle flange nr 1 0.00 0.00 0.00

D 800mm DN x 2000mm long with integral puddle flange nr 1 0.00 0.00 0.00

E 500mm DN x 2000mm long with integral puddle flange nr 1 0.00 0.00 0.00

F 500mm DN x 1500mm long with integral puddle flange nr 1 0.00 0.00 0.00

G 400mm DN x 1200mm long with integral puddle flange nr 6 0.00 0.00 0.00
H 2200mm DN x 2000mm long nr 2 0.00 0.00 0.00
0.00 0.00
2.1.1.2.2 Flange and plain ended straight pipes 0.00% 0.00

Page 5 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

A 1800mm DN x 2100mm long with integral puddle flange nr 2 0.00 0.00 0.00

B 1800mm DN x 2700mm long with integral puddle flange nr 2 0.00 0.00 0.00

C 1500mm DN x 1500mm long with integral puddle flange nr 2 0.00 0.00 0.00

D 800mm DN x 2000mm long with integral puddle flange nr 1 0.00 0.00 0.00

E 800mm DN x 1500mm long with integral puddle flange nr 1 0.00 0.00 0.00

F 500mm DN x 1500mm long with integral puddle flange nr 2 0.00 0.00 0.00

G 400mm DN x 1200mm long with integral puddle flange nr 31 0.00 0.00 0.00
H 1500mm DN x 1000mm long nr 1 0.00 0.00 0.00
J 800mm DN x 1000mm long nr 1 0.00 0.00 0.00
K 500mm DN x 1000mm long nr 1 0.00 0.00 0.00
0.00 0.00

Page 6 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

2.1.1.2.3 Flange ended straight pipes 0.00% 0.00


250mm DN x 250mm long straight pipe with one end to
A suit 600mm DN flange ended pipe and the other end to nr 16 0.00 0.00 0.00
suit 250mm dia. Flange pipe
250mm DN x 550mm long straight pipe with one end to
B suit 250mm DN flange ended pipe and the other end to nr 17 0.00 0.00 0.00
suit 250mm dia. Flange isolating pipe
C 400mm DN x 350mm long nr 31 0.00 0.00 0.00
0.00 0.00
2.1.1.2.4 Bends (AWWA C280-96) 0.00% 0.00
Up to 22.5 degrees 0.00% 0.00
A 2500mm DN plain ended nr 66 3.00 1.00 4.00
More than 22.5 degrees and up to 45 degrees 0.00% 0.00 0.00
B 2500mm DN plain ended nr 33 2.00 1.00 3.00
More than 45 degrees and up to 67.5 degrees 0.00% 0.00 0.00
C 2500mm DN plain ended nr 5 1.00 0.00 1.00
More than 67.5 degrees and up to 90 degrees 0.00% 0.00 0.00
D 2500mm DN plain ended nr 11 0.00 0.00 0.00
0.00 0.00 0.00
2.1.1.2.5 Bends (BS 534) 0.00% 0.00 0.00
Up to 30 degrees 0.00% 0.00
A 400mm DN plain ended nr 5 0.00 0.00 0.00
More than 30 degrees and up to 45 degrees 0.00% 0.00
B 1500mm DN plain ended nr 1 0.00 0.00 0.00
C 800mm DN plain ended nr 1 0.00 0.00 0.00
D 500mm DN plain ended nr 1 0.00 0.00 0.00
E 400mm DN plain ended nr 5 0.00 0.00 0.00
More than 45 degrees and up to 60 degrees 0.00% 0.00
F 400mm DN plain ended nr 5 0.00 0.00 0.00
More than 60 degrees and up to 90 degrees 0.00% 0.00
G 1500mm DN plain ended nr 2 0.00 0.00 0.00
H 800mm DN plain ended nr 2 0.00 0.00 0.00
J 500mm DN plain ended nr 2 0.00 0.00 0.00
K 400mm DN plain ended nr 25 0.00 0.00 0.00
L 250mm DN plain ended nr 1 0.00 0.00 0.00
M 250mm DN plain and flange ended nr 1 0.00 0.00 0.00
0.00 0.00
2.1.1.2.6 Tee 0.00% 0.00
0.00% 0.00
Air Valve Tee 0.00% 0.00
2500mm DN plain ended barrel with 600mm DN
A nr 14 0.00 1.00 1.00
concentric flange ended branch
2500mm DN plain ended barrel with 250mm DN level
B nr 1 0.00 0.00 0.00
top plain ended branch
2200mm DN plain ended barrel with 600mm DN
C concentric flange ended branch with integral puddle nr 1 0.00 0.00 0.00
flange
2200mm DN plain and flange ended barrel with 600mm
D DN concentric flange ended branch with integral puddle nr 1 0.00 0.00 0.00
flange
0.00 0.00
Washout Tee 0.00% 0.00
2500mm DN plain ended barrel with 400mm DN level
E nr 31 0.00 0.00 0.00
invert plain ended branch

450mm DN plain and flange ended barrel with 400mm


F nr 25 0.00 0.00 0.00
DN concentric plain ended branch with puddle flange

Page 7 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

450mm DN plain and flange ended barrel with 400mm


G nr 25 0.00 0.00 0.00
DN concentric flange ended branch
0.00 0.00
Junction Tee 0.00% 0.00
2500mm DN plain ended barrel with 1500mm DN
H concentric plain ended branch with two way 63.5mm nr 1 0.00 0.00 0.00
thick crotch plate.
2200mm DN plain ended barrel with 1800mm DN
J concentric plain ended branch with two way 63.5mm nr 2 0.00 0.00 0.00
thick crotch plate.
1500mm DN plain ended barrel with 1500mm DN
K concentric plain ended branch with two way 50mm nr 1 0.00 0.00 0.00
thick crotch plate.
800mm DN plain ended barrel with 800mm DN
L concentric plain ended branch with two way 25mm nr 1 0.00 0.00 0.00
thick crotch plate.

Page 8 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

2500mm DN plain ended barrel with 800mm DN


M nr 2 0.00 0.00 0.00
concentric plain ended branch
2500mm DN plain ended barrel with 500mm DN
N nr 1 0.00 0.00 0.00
concentric plain ended branch
1500mm DN plain ended barrel with 600mm DN
P nr 1 0.00 0.00 0.00
concentric plain ended branch
800mm DN plain ended barrel with 600mm DN
Q nr 1 0.00 0.00 0.00
concentric plain ended branch
500mm DN plain ended barrel with 500mm DN
R nr 1 0.00 0.00 0.00
concentric plain ended branch
0.00 0.00
2.1.1.2.7 Tapers 0.00% 0.00
2500mm DN plain ended to 2200mm DN plain ended
A nr 2 0.00 0.00 0.00
level top taper
2500mm DN plain ended to 2200mm DN flange ended
B nr 1 0.00 0.00 0.00
level top taper with integral puddle flange
2500mm DN plain ended to 2200mm DN plain ended
C nr 1 0.00 0.00 0.00
level top taper with integral puddle flange
0.00 0.00
2.1.2 Pipe Cutting 0.00% 0.00
0.00% 0.00
Cut internally lined and externally coated and
0.00% 0.00
wrapped steel pipe
A 2500mm DN steel pipe nr 227 7.00 1.00 8.00
B 1500mm DN steel pipe nr 6 0.00 0.00 0.00
C 800mm DN steel pipe nr 6 0.00 0.00 0.00
D 500mm DN steel pipe nr 6 0.00 0.00 0.00
E 450mm DN steel pipe nr 25 0.00 0.00 0.00
F 400mm DN steel pipe nr 90 0.00 0.00 0.00
G 250mm DN steel pipe nr 2 0.00 0.00 0.00
0.00 0.00
2.1.3 Pipe Jointing 0.00% 0.00
0.00% 0.00
2.1.3.1 Welded joints 0.00% 0.00
0.00% 0.00
Make welded slip joints on: 0.00% 0.00
A 2500mm DN spigot and socket ended pipes nr 1,700.00 45.00 11.00 56.00
0.00 0.00
Make welded collar joints on: 0.00% 0.00
B 2500mm DN plain ended pipes and specials nr 396.00 11.00 7.00 18.00
C 2200mm DN plain ended pipes and specials nr 6.00 0.00 0.00 0.00
D 1800mm DN plain ended pipes and specials nr 2.00 0.00 0.00 0.00
E 1500mm DN plain ended pipes and specials nr 17.00 0.00 0.00 0.00
F 800mm DN plain ended pipes and specials nr 17.00 0.00 0.00 0.00
G 500mm DN plain ended pipes and specials nr 16.00 0.00 0.00 0.00
H 450mm DN plain ended pipes and specials nr 50.00 0.00 0.00 0.00
J 400mm DN plain ended pipes and specials nr 220.00 0.00 0.00 0.00
K 250mm DN plain ended pipes and specials nr 2.00 0.00 0.00 0.00
0.00 0.00
Make welded stepped collar joints on: 0.00% 0.00
L 1500mm DN plain ended pipes and specials nr 3.00 0.00 0.00 0.00
M 800mm DN plain ended pipes and specials nr 3.00 0.00 0.00 0.00
N 500mm DN plain ended pipes and specials nr 2.00 0.00 0.00 0.00
0.00 0.00
2.1.3.2 Blank Flange Joints 0.00% 0.00
Rate to include supply of gaskets, bolts, nuts, and
A washers. Install blank flange on 1800mm DN flange nr 2.00 0.00 0.00 0.00
ended pipe, special and valve

Page 9 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

B Ditto on 600mm DN ditto nr 2.00 0.00 0.00 0.00


C Ditto on 450mm DN ditto nr 50.00 0.00 0.00 0.00
0.00 0.00
2.1.3.3 Mechanical coupling joints 0.00% 0.00
Make mechanical coupling joint on 1500mm DN pipes
A nr 1.00 0.00 0.00 0.00
and specials
B Ditto 800mm DN ditto nr 1.00 0.00 0.00 0.00
C Ditto 500mm DN ditto nr 1.00 0.00 0.00 0.00
D Ditto 400mm DN ditto nr 31.00 0.00 0.00 0.00
0.00 0.00
2.1.3.4 Flange adaptor Joints 0.00% 0.00
Make flange adaptor joint on 2200mm DN pipes,
A nr 2.00 0.00 0.00 0.00
specials and valves
B Ditto 1800mm DN ditto nr 2.00 0.00 0.00 0.00
C Ditto 1500mm DN ditto nr 1.00 0.00 0.00 0.00
D Ditto 800mm DN ditto nr 1.00 0.00 0.00 0.00
E Ditto 500mm DN ditto nr 1.00 0.00 0.00 0.00
F Ditto 400mm DN ditto nr 31.00 0.00 0.00 0.00

Page 10 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

0.00 0.00
2.1.3.5 Flange Joints 0.00% 0.00
Make flange joint on 2200mm DN pipes, specials and
A valves. Rate to include supply of gaskets, bolts, nuts nr 2.00 0.00 0.00 0.00
and washers
B Ditto 1800mm DN ditto nr 2.00 0.00 0.00 0.00
C Ditto 1500mm DN ditto nr 3.00 0.00 0.00 0.00
D Ditto 800mm DN ditto nr 3.00 0.00 0.00 0.00
E Ditto 600mm DN ditto nr 16.00 0.00 0.00 0.00
F Ditto 500mm DN ditto nr 3.00 0.00 0.00 0.00
G Ditto 400mm DN ditto nr 93.00 0.00 0.00 0.00
H Ditto 250mm DN ditto nr 17.00 0.00 0.00 0.00
0.00 0.00
2.1.3.6 Tie Bolt Joints 0.00% 0.00
Make Complete set of tie bolt joint to mechanical
A set 1.00 0.00 0.00 0.00
coupling joints on 1500mm DN pipes and specials
B Ditto on 800mm DN ditto set 1.00 0.00 0.00 0.00
C Ditto on 500mm DN ditto set 1.00 0.00 0.00 0.00
Make Complete set of tie bolt joint to mechanical
D set 2.00 0.00 0.00 0.00
coupling joints on 1800mm DN pipes and specials
E Ditto on 400mm DN ditto set 10.00 0.00 0.00 0.00
Sub total 0.00 0.00
2.2 PIPEWORK ABOVE GROUND 0.00% 0.00
0.00% 0.00
2.2.1 Pipe Laying and Fixing 0.00% 0.00
0.00% 0.00
2.2.1.1 Straight Pipes 0.00% 0.00
Plain ended pipes in standard and cut lengths 0.00% 0.00
A 2500mm DN pipes m 602.00 0.00 0.00 0.00
B Ditto but for coated and wrapped externally m 49.00 0.00 0.00 0.00
0.00 0.00
2.2.1.2 Specials 0.00% 0.00
The dimensions and types of specials are as shown
0.00% 0.00
on drawings
0.00% 0.00
2.2.1.2.1 Plain ended pipe specials with thickness varies 0.00% 0.00
2500mm DN pipe 7000mm long with MS plate
A thickness varies from 23mm to 17.5mm as shown in the nr 6.00 0.00 0.00 0.00
drawings
0.00 0.00
2.2.1.2.2 Flange ended straight pipes 0.00% 0.00
250mm DN x 250mm long straight pipe with one end to
A suit 600mm DN flange pipe and the other end to suit nr 19.00 0.00 0.00 0.00
250mm dia. Flanged isolating valve
0.00 0.00
2.2.1.2.3 Bends 0.00% 0.00
More than 22.5 degress and up to 45 degrees 0.00% 0.00
A 2500mm DN plain ended nr 29.00 0.00 0.00 0.00
B Ditto but for coated and wrapped externally nr 21.00 0.00 0.00 0.00
More than 45 degress and up to 67.5 degrees 0.00% 0.00
C 2500mm DN plain ended nr 6.00 0.00 0.00 0.00
D Ditto but for coated and wrapped externally nr 15.00 0.00 0.00 0.00
More than 67.5 degress and up to 90 degrees 0.00% 0.00
E 2500mm DN plain ended nr 2.00 0.00 0.00 0.00
F Ditto but for coated and wrapped externally nr 2.00 0.00 0.00 0.00
0.00 0.00
2.2.1.2.4 Air valve tees 0.00% 0.00

Page 11 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

2500mm DN plain ended barrel with 600mm DN


A nr 19.00 0.00 0.00 0.00
concentric flange ended branch
0.00 0.00
2.2.2 Pipe Cutting 0.00% 0.00
A Cut 2500mm DN pipes nr 33.00 0.00 0.00 0.00
0.00 0.00
2.2.3 Pipe Jointing 0.00% 0.00
0.00% 0.00
2.2.3.1 Welded joints 0.00% 0.00
Make welded collar joints on 2500mm DN plain ended
A nr 150.00 0.00 0.00 0.00
pipes and specials
0.00 0.00
2.2.3.2 Flange joints 0.00% 0.00
Make flange joint on 600mm DN pipes, specials, and
A valves. Rate to include supply gaskets, bolts, nuts and nr 19.00 0.00 0.00 0.00
washers
B Ditto on 250mm DN ditto nr 19.00 0.00 0.00 0.00
0.00 0.00

Page 12 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

2.2.3.3 Mechanical coupling joints 0.00% 0.00


Make mechanical coupling joint on 2500mm DN pipes
A nr 6.00 0.00 0.00 0.00
and specials
0.00 0.00
2.2.3.4 Tie bolt joints 0.00% 0.00
Make complete set of tie bolt joint to mechanical
A set 6.00 0.00 0.00 0.00
coupling joints on 2500mm DN pipes and specials
Sub total 0.00 0.00
0.00 0.00
2.3 PIPE CUTTING OF EXISTING PIPES 0.00% 0.00
Cutting existing 1500mm DN MS pipe. Rate refers to
one (1) no. of cut and to include excavation to affected
pipeline sectio, all necessary cutting tools and
A nr 2.00 0.00 0.00 0.00
equipment, cutting existing pipeline, removal of cut
section to location as directed by SYABAS or to
Contractor's own dump site
B Cutting existing 800mm DN MS pipe. Ditto nr 2.00 0.00 0.00 0.00
C Cutting existing 500mm DN MS pipe. Ditto nr 2.00 0.00 0.00 0.00
Sub total 0.00 0.00
0.00 0.00
2.4 PIPEWORKS IN SG. BESI tunnel 0.00% 0.00
0.00% 0.00
2.4.1 Pipe Laying and Fixing 0.00% 0.00
2.4.1.1 Straight pipes 0.00% 0.00
Plain ended pipes in standard and cut lengths 0.00% 0.00
A 2500mm DN pipes m 602.00 0.00 0.00 0.00
0.00 0.00
2.4.2 Pipe Cutting 0.00% 0.00
A Cut 2500mm DN pipes nr 15.00 0.00 0.00 0.00
0.00 0.00
2.4.3 Pipe Jointing 0.00% 0.00
0.00% 0.00
2.4.3.1 Welded joints 0.00% 0.00
Make welded collar joints on 2500mm DN plain ended
A nr 76.00 0.00 0.00 0.00
pipes and specials
0.00 0.00
2.4.3.2 Mechanical coupling joints 0.00% 0.00
Make mechanical coupling joint on 2500mm DN pipes
A nr 15.00 0.00 0.00 0.00
and specials
0.00 0.00
2.4.3.3 Tie bolt joints 0.00% 0.00
Make complete set of tie bolt joint to mechanical
A set 15.00 0.00 0.00 0.00
coupling joints on 2500mm DN pipes and specials
Sub total 0.00 0.00
0.00 0.00
3 PART 3 - VALVES AND FITTING 0.00% 0.00
0.00% 0.00
3.1 Butterfly Valves (Rating 10 bars) 0.00% 0.00

2200mm DN double flanged butterfly valve complete


with electric actuator with socket and plug arrangement
A nr 2.00 0.00 0.00 0.00
for commection to portable generator set, headstock
and handwheel suitable for optional manual operation

B 1800mm dia. Ditto. nr 2.00 0.00 0.00 0.00


C 1500mm dia. Ditto. nr 1.00 0.00 0.00 0.00
D 800mm dia. Ditto. nr 1.00 0.00 0.00 0.00

Page 13 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

500mm DN double flanged butterfly valve complete


E with opening/closing indicator and suitable for manual nr 1.00 0.00 0.00 0.00
operation
Sub total 0.00 0.00
0.00 0.00
3.2 Sluice Valves (Rating 10 bars) 0.00% 0.00
400mm DN double flanged sluice valve complete with
A opening/closing indicator and suitable for manual nr 62.00 0.00 0.00 0.00
operation
Sub total 0.00 0.00
0.00 0.00
3.3 Air Valves (Rating 20 bars) 0.00% 0.00
250mm dia. Double flanged double orifice air valve
A complete with 250mm dia. Double flanged isolating nr 35.00 0.00 0.00 0.00
butterfly valve
Sub total 0.00 0.00
0.00 0.00

Page 14 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

3.4 Fittings 0.00% 0.00

Collect and fix galvanised mild steel extension spindle


in suitable lenghts suitable for operating 2200mm dia.
A m 6.00 0.00 0.00 0.00
Butterfly valve inclusive of bracket supports at 1.5m
centres as shown in the drawings

B Ditto for operating 1800mm dia. Butterfly valve ditto m 8.00 0.00 0.00 0.00
C Ditto for operating 1500mm dia. Butterfly valve ditto m 4.00 0.00 0.00 0.00
D Ditto for operating 800mm dia. Butterfly valve ditto m 4.00 0.00 0.00 0.00
E Ditto for operating 500mm dia. Butterfly valve ditto m 4.00 0.00 0.00 0.00
F Ditto for operating 400mm dia. Butterfly valve ditto m 300.00 0.00 0.00 0.00
Sub total 0.00 0.00
0.00 0.00
4 PART 4 - MISCELLANEOUS 0.00% 0.00
0.00% 0.00
4.1 Concrete and Formwork 0.00% 0.00
0.00% 0.00
Mass concrete grade C15 0.00% 0.00
A in 50mm thick blinding layer m2 600.00 0.00 13.98 13.98
0.00 0.00
Mass concrete grade C20 0.00% 0.00
In thrust and anchor blocks, pipe surround, supports for
B valves and flowmeter etc. rate to include all necessary m3 3,200.00 53.00 29.00 82.00
formwork
0.00 0.00
Precast concrete grade C30 0.00% 0.00
In cover slabs of suitable size panels, counter weight
block, P.C. slab and etc. Rate to include all necessary
C m3 615.00 0.00 0.00 0.00
formwork, reinforcement, lifting hooks, handling and
placing in position
0.00 0.00
Reinforced concrete grade C30 0.00% 0.00
D In valve chambers, beams, saddle, thrust block and etc. m3 3,250.00 0.00 17.46 17.46
0.00 0.00
Formwork 0.00% 0.00
E Vertical class F1 formwork to faces below ground m2 5,350.00 228.01 95.55 323.55
F Vertical class F2 formwork to exposed faces m2 3,100.00 0.00 29.90 29.90
G Soffit class F2 formwork m2 100.00 0.00 0.00 0.00
H U3 finish to unformed concrete surface m2 250.00 0.00 0.00 0.00
Form opening of suitable size and/or build in pipes
J nr 90.00 0.00 0.00 0.00
exceeding 200mm dia. But not exceeding 600mm dia.

Ditto exceeding 600mm dia. But not exceeding


K nr 4.00 0.00 0.00 0.00
1200mm dia.
Ditto exceeding 1200mm dia. But not exceeding
L nr 8.00 0.00 0.00 0.00
1800mm dia.ditto
Ditto exceeding 1800mm dia. But not exceeding
M nr 4.00 0.00 0.00 0.00
2500mm dia.ditto
Form recess of suitable size for cover slabs. Rate to
N m 350.00 0.00 0.00 0.00
include galvanised MS angles and fishtails
0.00 0.00
Steel Reinforcement 0.00% 0.00
P 12mm dia. Mild steel bars and below kg 4,000.00 290.70 101.57 392.27
Q 12mm dia. High tensile bars and below kg 200,000.00 0.00 0.00 0.00
R 16mm dia. High tensile bars and above kg 300,000.00 0.00 72.04 72.04
S MS Ref. No A193 (A7) m2 300.00 0.00 0.00 0.00

Page 15 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

T MS Ref. No A393 (A10) m2 200.00 0.00 0.00 0.00


Sub total 0.00 0.00
0.00 0.00
4.2 Brickworks 0.00% 0.00
A 115mm thick brickwork in common bricks m2 300.00 0.00 0.00 0.00
B 230mm thick brickwork in common bricks m2 300.00 0.00 0.00 0.00
20mm thick plastering to internal and external faces of
C m2 700.00 0.00 35.77 35.77
brickwork and concrete surfaces
Sub total 0.00 0.00
0.00 0.00
4.3 Pipe Testing 0.00% 0.00
Provide radiographic examination on welded joints as
A nr 50.00 0.00 0.00 0.00
directed by the S.O.
Provide ultrasonic examination on welded joints as
B nr 50.00 0.00 0.00 0.00
directed by the S.O.

Water pressure testing of all pipelines as specified


including the pipeline in Sg. Besi tunnel. Rate to include
C L.S 1.00 0.00 0.00 0.00
use of testing equipment, supply of water for testing
and dewatering upon successful testing of all pipelines

Page 16 of 17
Contract No. : PIMSB/L2P10/CPM/LA/015
Updated : 12-Jul-17

Workdone Qty
No Work Description UOM Qty (LOA)
Previous Current To-Date

Allow for sterilizing with treated water and flushing of all


pipelines as specified including the pipelines in Sg.
Besi tunnel. Treated water use for the first test will be
supplied by the employer. Contractor's rate shall
D L.S 1.00 0.00 0.00 0.00
include the supply of chemical used and supply of
treated water for any susequent test liaison and
coordination works related to the supply of treated
water.
Extra over item 4.3 D above for mobilisation and
subsequent demobilisation of workers and equipment if
E L.S 1.00 0.00 0.00 0.00
the sterilisation works to be carried out after the date for
completion
Sub total 0.00 0.00

TOTAL

Page 17 of 17

Anda mungkin juga menyukai