ELECTRO-MAGNETIC COMPATIBILITY
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three
major axes
The 2 Amp, 3 Amp and 5 Amp The chargers will continue to 5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn
Battery Chargers have been operate during cranking and
designed to be permanently running. All chargers can accept HUMIDITY
BS EN 60068-2-30
connected to a battery, keeping it multiple AC voltage connections. Db Damp Heat Cyclic 20/55 oC
charged to maximum capacity. @ 95% RH 48 Hours
The DSE battery chargers are BS EN 60068-2-78
Cab Damp Heat Static 40 oC
The chargers can be either expertly designed using high-grade @ 93% RH 48 Hours
mounted via DIN rail or to the components and capacitors
SHOCK
chassis, using the fixing holes that allowing the units to function more BS EN 60068-2-27
are built into the case. The chargers efficiently, providing a longer and Three shocks in each of three major axes
stylish design includes an LED more reliable life-span than other 15 gn in 11 mS
indicator on the front that shows chargers in their class. Their in-
when the charger is in a normal or built robustness makes them ideal
overload condition. for the rigours of a wide variety of
markets including heavy and light
industrial environments.
1ph
N
DSE9000
7
OTHER
1 1
ISSUE 5
DSEPower
AC SUPPLY
DSE9150 OUTPUT
3 A DC 12 V DC at 13.7 V DC
DSE9155 OUTPUT
2 A DC 30 V DC at 34.3 V DC
DSE9255 OUTPUT
5 A DC 24 V DC at 27.4 V DV
DSE9150 - 3 A 12 V EFFICIENCY
>80%
REGULATION
LINE
<0.001% Vo
LOAD
1% Vo
PROTECTIONS
Short Circuit
Over Voltage
Over Current
Reverse Polarity
DSE9130 - 5 A 12 V DIMENSIONS
DSE9155 - 2 A 30 V DSE9150 DIMENSIONS
108 mm x 101 mm x 49 mm
DSE9255 - 5 A 24 V 4.2 x 4 x 1.9
WEIGHT
0.16 kg
ADVANCED FEATURES KEY BENEFITS
DSE9130, DSE9155 & DSE9255
Multi-Stage Charging Boost Mode Suitable for a wide range of DIMENSIONS
Constant current- maximum Boosts and equalises cell battery types 136 mm x 140 mm x 63 mm
5.4 x 5.5 x 2.5
current available during charge charge improving battery No moving parts for longer
recovery phase performance and life battery charger life WEIGHT
Constant voltage Simple boost connection using Switched mode design 0.5 kg
-40 F to +185 F
Multiple modules can be linked -40 oC to +85 oC
Makes the chargers ideal for all Eco-Power to save energy
battery types together to provide larger current
Full Protection output
Reverse polarity protection,
short circuit protection and
current limiting
Automatic recovery after the
removal of fault conditions
RELATED MATERIALS
TITLE PART NOS
DSE9000 Series Installation Instructions 053-049
DSE9000 Series Operator Manual 057-085
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-059/10/10 (7)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457