AND OPEN WITH NOTEPAD++ IF POSSIBLE. (NOT NEEDED BUT LOOKS BETTER ;) )
#####################################################################################
##############
####################################################
########## XIMODE ##########
####################################################
Author: xs-Sol
Website: xs-Sol.com
Date: 10.06.2016
Version: 2.1.0.
Contact: contact@xs-sol.com
Discussion: http://bit.ly/24NZnKh (Dashcamtalk.com forum thread)
Donate: http://tinyurl.com/jantc33 (Paypal)
Tutorial video: https://youtu.be/90my8LSSXck
####################################################
########## MODES ##########
####################################################
Auto (Nothing touched, except the bitrate, deleting THM files, 4GB files, JPEG 100%)
Normal (HDR filming mode with good saturation and contrast settings. Can be used without
any
additional video editing.Mode for daylight/everyday usage, clean and sharp videos, auto scene
mode (1), deleting THM files, RAW+JPEG, JPEG 100%)
Night (Mode for night filming, added noise reduction to 5120, added sharpness (coring), set
saturation/vibrance to overaverage, landscape scene mode (13), deleting THM files, RAW+JPEG, JPEG
100%)
Yitune (Mode for filming with as less as possible compression and preset footages, low
vibrance/saturation, low sharpness, low contrast, perfect for users who want to edit their videos,
deleting THM files, RAW+JPEG, JPEG 100% - based on Yimax by nutsey)
GoPro's equivalent: Protune
SupYiView (Mode for immersive wide angle perspective, captures 1600x1200p60 4:3 videos and
stretches it to 1920x1080p60 16:9 videos, uses the height of the camera's sensor that you get with 4:3
meaning that you will see more of the sky and ground assuming you are pointed at the horizon
,deleting THM files, RAW+JPEG, JPEG 100%)
GoPro's equivalent: Superview
Custom (Insert between the two given lines your custom script)
Custom2 (Insert between the two given lines your custom script)
3. ########################################################
### INSTALLATION OF TELNET FOR PC/MAC/ANDROID/IPHONE ###
########################################################
####################################################
########## HOW TO USE ##########
####################################################
----------------------
--- Normal Booter ---
----------------------
1. Click and hold the shutter button (top button to start filming etc.)
2. Now start the camera with the front power button. (keep holding the shutter button)
3. After the front LED has stopped blinking (reading process finished), the top small red LED near
the shutter button should light up. (keep holding the shutter button)
4. Now press within 6 seconds the front power button to choose the script.
Each time a "click/press" has been registered, the WIFI LED will light one time up (blue LED
on the side)
Press once -> XIMODE-AUTO will be loaded
Press twice -> XIMODE-NORMAL will be loaded
Press three times -> XIMODE-NIGHT will be loaded
Press four times -> XIMODE-YITUNE will be loaded
Press five times -> XIMODE-SupYiView will be loaded
Press six times -> XIMODE-NIGHTLAPSE will be loaded
Press seven times -> XIMODE-CUSTOM will be loaded
Press eight times -> XIMODE-CUSTOM2 will be loaded
After the x-pressed times, NOW you can stop holding the shutter button.
5. The front LED starts to blink and the device will reboot.
Now wait about 10seconds, don't press any further buttons, the device will reboot, and load
YOUR CHOSEN SCRIPT.
6. The long beep indicates that the script has been loaded, and the amount of flashing times of
the front LED indicates which script has been loaded.
----------------------
--- Telnet ---
----------------------
INFO: Everytime when the device is started normally, it loads the previously selected mode.
F.ex: You selected mode 2 and turned the camera off. When simply starting the camera
with only the power button, it will directly load mode 2.
The holding of shutter button tells the device to count the pressed times to select mode.
####################################################
########## CONVERT RAW TO DNG ##########
####################################################
1. Start inside the "RAW_to_DNG_converter -> 01_RAW2DNG" directory and open the file
"Raw_to_DNG_converter.exe".
2. Right click on list and select "Add files".
3. Add your RAW files from the Xiaomi Yi cam.
4. Check if output format is "DNG", also check that the default camera is XIAOMI YI.
5. Click convert and wait till the files are generated.
6. Now open the folder 02_CorrectDNGs and drag&drop the converted DNG into "exiftool.exe"
and
afterwards into "Yi-correct-RAW-counter.bat"
7. Now you can edit the highest quality pictures available for the
Xiaomi Yi with Photoshop, Gimp, ... .
####################################################
########## UNINSTALLATION ##########
####################################################
Windows:
1. Run uninstaller.bat
Linux/Mac:
1. Simply delete all the files of XIMODE(!!! EXCEPT DCIM AND MISC !!!)
(!!! EXCEPT DCIM AND MISC !!!)
####################################################
########## ABOUT XIMODE ##########
####################################################
What is Ximode?
Ximode is a tool, that add's the missing modes for the Xiaomi Yi, as the auto, normal, night, and other
preset modes to enhance your recording and shooting moments.
Ximode is can be used without the official Xiaomi app, and the modes are choosed by pressing at start
the front button only once, twice, three times etc. .
Why Ximode?
Ximode is a script which has only to be placed on your SD-Card, and you're good to go for your next
shootings and recording without any additional scriptings. It's main target was to create a script which
the user can use directly without further scripting knowledge and recieve all necessery modes to feel
the "action-cam" magic.
####################################################
########## UPDATE - LOG ##########
####################################################
2.0.2. Not launching scripts bug fix from previous version! (2.0.1.)
2.0.1. Minor script updates and bug fixes. Added "No split 4GB" for previous versions too.
(1.2.13 / 1.2.12 / 1.2.6)
2.0.0. Added XYC Configurator to XIMODE. Now it's possible to change scripts on the run
with only a mobile phone (Telnet needed), or with the buttons.
Fusioned the latest XYC Configurator Version with the latest XIMODE (previous
one
1.0.2.).
Updated the delete THM files, now all THM files in all Media folders
(100MEDIA,101MEDIA,...135MEDIA,...) will be deleted.
Added more scene modes:
#auto[1] / mode-off[2] / night[10] / landscape[13] / portrait[14] /
scene_sunset[15] / #sand_snow[16] / underwater[19] / day_lightning[27] / through_glass[34] /
car_DV[38]
1.0.2. Edited scripts. BIG update on the Night script. (Fixed ISO for videos & more)
Added one more custom script. (called custom2)
Bugs fix.
1.0.1. Edited scripts. Added nightlapse and custom. Auto-mode is now the first mode.
All other modes have been placed one level up.
Overall update for better GUI, understanding and description.
Updated 4GB script. (Working now with 1.2.13)
####################################################
########## INFO/CONTACT/HELP ##########
####################################################
SOURCE/THANKS: