Criteria 3.7A.1.1 Assessor guide: observe that Assessor guide: confirm that
Job sheets/instructions interpreted and understood. Job sheets/instructions are obtained in accordance with The tasks to be undertaken can be identified.
work site procedures.
Elemen 3.7A.2 Memilih dan menggunakan sejumlah perkakas tangan dan peralatan
Element 3.7A.2 Select and use a range of hand tools and equipment
Kriteria 3.7A.2.1 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Perkakas tangan dan perlengkapan digunakan dengan Perkakas tangan dan perlengkapan digunakan dengan cara Tindakan pencegahan keamanan yang dilakukan ketika
cara yang aman sesuai dengan prosedur operasi standar. aman yang sesuai dengan prosedur operasi standar. penggunaan perkakas tangan dan perlengkapan sesuai dengan
penyetelan proses yang dapat didentifikasi.
Criteria 3.7A.2.1 Assessor guide: observe that Assessor guide: confirm that
Hand tools and equipment are used in a safe manner in Hand tools and equipment are safely used in accordance The safety precautions to be taken when using hand tools and
accordance with standard operating procedures. with standard operating procedures. equipment associated with the process line to be set can be
identified.
Criteria 3.7A.3.1 Assessor guide: observe that Assessor guide: confirm that
Process line is set up to specifications in accordance with The process line is set to specification in accordance with The specifications applying to the process line can be identified.
standard operating procedure. standard operating procedures.
Kriteria 3.7A.3.2 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Semua sensor, keterkaitan proses, display, monitor, Semua sensor, keterkaitan proses, display, monitor, Semua sensor, keterkaitan proses, display, monitor, feedback loops,
feedback loops, disetel memenuhi spesifikasi dengan feedback loops, disetel memenuhi spesifikasi sesuai yang berhubungan dengan jalur proses dapat diidentifikasikan.
menggunakan prosedur operasi standar. dengan prosedur operasi standar. Spesifikasi yang dapat digunakan untuk sensor, keterkaitan proses,
display, monitor, feedback loops yang berhubungan dengan jalur
proses dapat diidentifikasikan.
Criteria 3.7A.3.2 Assessor guide: observe that Assessor guide: confirm that
All sensors, process links, displays, monitors, feedback All sensors, process links, displays, monitors, feedback All sensors, process links, displays, monitors, feedback loops etc.
loops etc. are set up to specifications using standard loops etc. are set to specifications in accordance with incorporated in the process line can be identified. The
operating procedures. standard operating procedures. specifications applicable to the sensors, process links, displays,
monitors, feedback loops etc. incorporated in the process line can
be identified.
Kriteria 3.7A.3.3 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Semua peralatan/aparat keselamatan disimpan ditempat Semua peralatan/aparat keselamatan diatur memenuhi Fungsi dan semua peralatan keselamatan yang berhubungan
yang aman dan diperiksa sesuai dengan prosedur yang spesifikasi sesuai dengan prosedur operasi standar. dengan jalur proses dapat diberikan. Operasi kerja yang tepat dan
tepat. spesifikasi dari semua peralatan keselamatan yang berhubungan
dengan jalur proses dapat diberikan.
Criteria 3.7A.3.3 Assessor guide: observe that Assessor guide: confirm that
All safety apparatus is in place and checked for correct All safety apparatus is in place and checked for correct The function of all safety apparatus incorporated in the process
operation. operation. line can be given. The correct operation and specification for all
safety apparatus incorporated in the process line can be
identified.
Criteria 3.7A.3.4 Assessor guide: observe that Assessor guide: confirm that
Process line is run to meet predetermined production and The process line is operated in accordance with standard The product specifications and quality requirements can be
quality requirements. operating procedures. The product is checked for identified. The production requirements can be identified.
conformance to quality requirements and specifications.
The process line operation is checked for conformance to
production requirements.
Kriteria 3.7A.3.5 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Jalur proses diatur untuk memenuhi spesifikasi dan Apabila diperlukan, jalur proses diatur untuk memenuhi Efek terhadap pengaturan jalur proses pada produk dan spesifikasi
tuntutan opersional spesifikasi dan tuntutan operasional sesuai dengan operasional dapat diberikan.
prosedur operasi standar.
Criteria 3.7A.3.5 Assessor guide: observe that Assessor guide: confirm that
Process line is adjusted to meet specifications and Where appropriate, the process line is adjusted to meet The effect of process line adjustments on product and operational
operational requirements. specifications and operational requirements in specifications can be given.
accordance with standard operating procedures.
Kriteria 3.7A.3.6 Pedoman penilai: amati bahwa Pedoman penilai: pastikan bahwa
Menginstruksikan operator seperti diperlukan. Apabila diperlukan, operator diinstruksikan sesuai dengan Persyaratan seorang operator selama operasi dan pemantauan terus
tuntutan operasional pada jalur proses. menerus terhadap jalur proses dapat diidentifikasi.
Criteria 3.7A.3.6 Assessor guide: observe that Assessor guide: confirm that
Operator(s) instructed as required. Where appropriate, operators are instructed on the The requirements of operators in the operation and monitoring of
operational requirements of the process line. the continuous process line can be identified.
Range statement
This unit applies to the setting of a wide range of continuous process lines where operations are performed by machines and equipment that are sequentially linked. This may include
mechanical assembly operations, electrical/electronic assembly operations and processes such as welding, testing, insertion, filling, printing, hot stamping etc. Work may be carried out
autonomously or as part of a work team. All work is carried out to predetermined standards of quality, safety and specifications. Where setting or adjustment of NC/CNC or PLC controls is
Pedoman bukti
Konteks penilaian Kondisi penilaian
Unit ini harus dinilai pada pekerjaan. Kompetensi-kompetensi Peserta akan mempunyai akses untuk: Semua peralatan, perlengkapan, material dan dokumentasi yang diperlukan.
yang meliputi unit ini akan diperagakan secara individual atau Peserta akan diijinkan mengacu pada dokumen-dokumen berikut: Prosedur yang relevan dengan tempat kerja.
sebagai bagian dari suatu kelompok. Lingkungan penilaian Spesifikasi yang relevan dengan produk dan pembuatan. Codes, standar, buku pedoman, dan referensi material yang
jangan sampai merugikan peserta. relevan. Peserta akan diperlukan untuk: Menjawab pertanyaan yang diberikan oleh Assessor secara lisan atau
menggunakan metode komunikasi lainnya. Mengenal rekan kerja yang dapat membantu mengumpulkan bukti yang
kompeten. Memberikan bukti-bukti yang dapat menunjukkan kemampuan seseorang pada off the job training yang
berkaitan dengan unit ini. Penilai harus yakin bahwa peserta dapat menguasai dan konsisten melakukan seluruh elemen
dalam unit ini sesuai spesifikasi kriteria, termasuk pengetahuan yang diperlukan.
Evidence guide
Assessment context Assessment conditions
This unit should be assessed on the job. The competencies The candidate will have access to: - All tools, equipment, materials and documentation required. The candidate will be
covered by this unit would be demonstrated by an individual permitted to refer to the following documents: - Any relevant workplace procedures. - Any relevant product and
working alone or as part of a team. The assessment environment manufacturing specifications. - Any relevant codes, standards, manuals and reference materials. The candidate will be
should not disadvantage the candidate. required to: - Orally, or by other methods of communication, answer questions put by the assessor. - Identify colleagues
who can be approached for the collection of competency evidence where appropriate. - Present evidence of credit for
any off-job training related to this unit. Assessors must be satisfied that the candidate can competently and consistently
perform all elements of the unit as specified by the criteria, including required knowledge.