Anda di halaman 1dari 4

bar Bar converts to 100,000 Pascals exactly

psi, pfsi, lb/in or Pounds per Square Inch or Pounds Force per Square
lbf/in Inch converts to 6,894.76 Pascals

mbar, mb or mbr Millibar converts to 100 Pascals exactly

Newton per Square Metre converts to 1 Pascal


N/m
exactly

Pascal converts to 1 Pascal exactly (SI unit for


Pa
pressure)

hPa Hectopascal converts to 100 Pascals exactly

kPa Kilopascal converts to 1,000 Pascals exactly

MPa Megapascal converts to 1,000,000 Pascals exactly

Kilogram per Square Centimeter or Kilogram Force


kg/cm or kgf/cm per Square Centimetre converts to 98,066.5
Pascals exactly

Torr Torr converts to 133.322 Pascals

mTorr Millitorr converts to 0.133322 Pascals

Standard Atmosphere converts to 101,325 Pascals


atm
exactly

Technical Atmosphere converts to 98,066.5 Pascals


at
exactly

dyn/cm, dyne/cm Dyne per Square Centimeter converts to 0.1 Pascals


or dynes/cm exactly

oz/in or ozf/in Ounce per Square Inch or Ounce Force per Square
Inch converts to 430.922 Pascals

Tons per Square Inch or Tons Force per Square Inch


tsi or tfsi (uk, long)
(uk, long) converts to 15,444,300 Pascals

tsi or tfsi (usa, Tons per Square Inch or Tons Force per Square Inch
short) (usa, short) converts to 13,789,500 Pascals

tsf or tfsf (usa, Tons per Square Foot or Tons Force per Square Foot
short) (usa, short) converts to 95,760.5 Pascals

Pounds per Square Foot or Pounds Force per Square


psf or pfsf
Foot converts to 47.8803 Pascals

Gram per Square Centimetre or Gram Force per


g/cm or gf/cm Square Centimeter converts to 98.0665 Pascals
exactly

kg/cm - Kilogram per Square Centimetre Pressure Unit

Kilogram or Kilogram Force per Square Centimeter (kg/cm2 or


kgf/cm2) is a pressure unit that has been largely superseded by the
SI unit system of Pascal units. It is the metric equivalent of pounds
per square inch (psi). 1 kg/cm2 equals 98,066.5 Pascals.
Similarly to psi, kg/cm2 is part of a group of pressure units that relate
pressure with weight. This is convenient in applications where a pressure is
applied to generate a load such as in material testing. Typically a piston
cylinder device is utilised to convert the applied pressure into a force. The
force can be easily calculated in kilograms weight by multiplying the kg/cm2
pressure by the area to determine the weight applied in kilograms.

The most popular way of writing Kilograms per Square Centimeter is as


kg/cm2, even though kgf/cm2 describes it's meaning more accurately. The
conventional way of writing it is misleading to some, since it reads as Mass /
Unit Area and leads to confusion since pressure is always defined as Force /
Unit Area.

To calculate a kg/cm2 reading into another pressure unit you can multiply it
by one of the values in the table below. To convert a value to kgf/cm2 just
click on the relevant unit below to obtain the reverse conversion factor.

Alternatively If you have a number of values to convert you can use the
pressure converter to save time.

Find out how kg/cm2 is calculated from SI units and view the alternative
ways of writing kg/cm2.
kg/cm Pressure Conversion Factors

0.980665 bar

14.2233 psi

980.665 mbar

98066.5 N/m

98066.5 Pa

980.665 hPa

98.0665 kPa

0.0980665 MPa

1 kgf/cm

10000 mmH2O 4C (39.2F)

1000 cmH2O 4C (39.2F)

10 mH2O 4C (39.2F)

393.701 inH2O 4C (39.2F)

32.8084 ftH2O 4C (39.2F)

735.559 mmHg 0C (32F)


73.5559 cmHg 0C (32F)

28.9590 inHg 0C (32F)

735.559 Torr

735559 mTorr

0.967841 atm

1 at

980665 dyn/cm

227.573 oz/in

735559 Hg 0C (32F)

0.00634971 tsi (uk, long)

0.00711167 tsi (usa, short)

1.02408 tsf (usa, short)

2048.16 psf

1000 g/cm

Anda mungkin juga menyukai