Anda di halaman 1dari 16

JACKING AND CRIBBING

BLOCKS-GLUTS AND DUNNAGE


JACKING CRIBBING, BLOCKING, SHORING, STABILISATION CATALOGUE

w w w .c r iba n dm a tc o .com.au
re:imagine stability
For years, fire departments, industrial plants, mining and construction workers have used wood to crib, block or stabilise
equipment, products and vehicles. A lot of cribbing used today is wood. Wood is relatively inexpensive, but comes
with knots, is absorbent, cracks, splits and splinters. The only guarantee with wood is that you will eventually need to
replace it.
dura crib and dura stat plastic cribbing products do not contain knots, do not split, crack or splinter. They do not
absorb blood, oil or most commonly used chemicals and are slip resistant. This saves you time and money in the long
run.
Using dura crib and dura stat recycled plastic cribbing and blocking products is an ethical and ecologically sustainable
important statement. By using these products for your stabilising tasks, you help support a solution to deforestation,

re:engineered plastic benefits


100% recycled plastic construction for added durability
Unmatched strength stronger than most timbers
Resistant to fuel, oil and most common industrial chemicals
50 year warranty*
Light weight
Splinter free
Available in black and HI-VIS Yellow
*Against splitting, rot, fluid absorption, termites and mould

PLASTIC vs WOOD
ATTRIBUTE PLASTIC WOOD
Absorption Almost Zero Everything
Splitting None Yes
Knots None Yes
Stability Very No
Warr anty 50 Years* None
Lab Tested Yes None
Time Very Fast Slow
Envir onmentally Sound Yes Poor
P.S.I. 700- 1200 200-1000
Consistency 2% 0
Pr edictability 99% 0

For example using:

500 PSI; Strength 500 x 3.5 x 3.5 x 4 = 24,000lb (or 10,886.kg).


Plastic cribbing can sustain up to 700-1200 PSI.
Creating a safer, longer lasting and more durable cribbing base.
The Army Corps of Engineers is the leading source of cribbing
information and recommends the following cribbing guidelines.
Bottom layer should be solid to spread the load, especially on soil and asphalt paving.
Limit height to 3 times width (shortest with for non-square cribs).
Overlap the corners by 4 inches to assure slow crush-type failure.

22
design strength active vs- static cribbing
Crossgrain bearing strength for traditional wood Active cribbing is used when a person is working
cribbing varies by wood species from 200 PSI near the structure, product or vehicle being
to 1000 PSI. supported. Static (or Passive) cribbing is used
to keep materials o the ground in storage
plastic cribbing blocks or allow a forklift to operate.
for optimal safety
dura crib cribbing blocks optimise safety when production and testing
stabilising heavy loads after they have been lifted
for maintenance and access. All dura crib and dura stat products are manufactured
dura crib plastic blocking systems o r more
from recycled High Density Polyethylene (HDPE),
stable, longer lasting and easily cleaned alternates using repeatable formulation, repeatable
to wood blocks. They have an aggressive patterned manufacturing process and consistent quality control.
slip resistant pyramid locking surface for stable All products have been tested under the guidance of
cribbing, chocking, bracing and shoring. AS1170.0.2002 and AS2498.3.1198. Working load
Limits (WLL) represent the products capacities at an
dura stat plastic blocking systems o r the same
atmospheric temperature of 250 Celsius. Further
advantages, but are designed for a single layer to
allow loads or products to be easily picked up. It is
Technical Data Sheet (TDS) or contact
similar in its surface to wood, without the splinters!
info@cribandmatco.com.au
dura stat products are available in profiles of
50mm x 50mm up to 300mm x 400mm and in
lengths of 3600mm.
Warning: Always perform your own risk assessment
Unlike wood, dura crib and dura stat plastic before using this product. Always know the weight of
products o r a stable, predictable and high load the equipment or machine being supported. Consult
bearing capacity which ultimately deforms only your equipment and machinery manufacturer manual
slowly under extreme load. Safety is a major driver and guidelines for recommended blocking and lifting
in the switch away from old fashioned wooden points. Never exceed the maximum WLL of the
blocks, which audibly crack under high loads. Also, cribbing blocks or cribs. Under no circumstances does
environmental issues and the simple economics of the WLL mentioned above take into consideration
paying a little more for a dura crib and dura stat point loading or uneven weight distribution of the
plastic product with a 50 year warranty* are other supported load. Copies of Technical Data Sheets and
strong incentives for change. the Technical Operating Manual for Composite
dura crib and dura stat plastic stabilisation Cribbing can be obtained from the resource page of
systems will not splinter and do not absorb most this web site, emailing info@cribandmatco.com.au or
fluids. The system is also easily customised into calling +61 (0)2 9674 7428.
specific shapes to create ramps and irregular
*Against splitting, rot, fluid absorption, termites or mould.
cribbing stacks.

THE USER MUST BE FAMILIAR WITH THIS Alternately, you can request via email at
GUIDE & ONLY THE END USER CAN DETERMINE info@cribandmatco.com.au or phone 02 9674 7428 .
LOAD CAPACITY. ANY BENDING, DEFLECTION, As the use of the dura crib and dura stat products

SAGGING, BULGING OR DEFORMITY WILL under users conditions are beyond Cribbing and Matting
NECESSITATE ADDITIONAL CRIBS. Cos control, no warranty, expressed or implied,
including but not limited to merchantability or fitness
Warning: Failure to observe the detailed Plastic for a particular use, is made concerning the products.
Cribbing Safety Precautions and instructions in The Block Total Working Load Limit (WLL) capacities
the Turtle Plastics Technical Operations Manual mentioned in this catalogue are only possible if the
for Composite Cribbing and product Technical full press load is evenly distributed across the top and
Data Sheet may result in serious personal injury bottom surfaces of the cribbing block. Never exceed
or death. Copies of the Technical Operating Manual the Working Load Limit of the cribbing block or cribs.
for Composite Cribbing and product Technical Under no circumstances do the Working Load Limits
Data Sheet can be obtained by visiting indicated in this catalogue take into consideration
www.cribandmatco.com.au and follow the point loading or uneven weight distributions of the
links to resources. supported load.

3
u.s. army corps of engineers cribbing layout guide
the slab super jacking and cribbing blocks
dura crib THE SLAB jacking and support blocks are used on large
heavy stabilisation applications. Able to hold huge load weights, the
dura crib 1/2 and full "THE SLAB" cribbing blocks are active blocking
products used when a person is working on or near a structure or
work piece being stabilised. The dura crib 1/2 and full "THE SLAB"

stabilising blocks with a working load limit (WLL) of 6.0MPa -


60.8kg/cm2 865psi and maximum working load capacity of 55,000
kg for the SLABand 110,000kg for the full SLAB with the loadevenly
spread across the entire load bearing areas of the blocks.The pyramid

at any angle. Positive interlocking by gravity and friction provide


stability and safe load bearing capacity when used in stacks.
Excellent as a single jacking block or in solid cribbing stacks with
huge load bearing capacity.

The dura crib 1/2 and full "THE SLAB" cribbing block is a safer
alternative to timber dunnage and blocks used in jacking and
stabilising task. Made from recycled plastic to a repeatable formula,
strict manufacturing process and quality controls ensure product
uniformity. Being made from recycled material is great for the
environment and ensures the product meets full sustainability.
Ultra strength black Working Load Limit
(WLL) 60.8kg/cm2
Tested under the guidance of
AS1170.0.2002 and AS2498.3.1998
Comprehensive Technical Data Sheets
(TDS) available
100% recycled high density polyethylene
(HDPE) construction for durability
Lightweight
Resistant to fuels, oils and most common
chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40C to
+75C Slip resistant pyramid locking
surface creates a stronger,
50 year warranty against splitting, rotting, more stable base than wood.
absorption, termites and mould

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCSC61212LB 160mm 300mm 300mm 11.5kg Black *60.8kg/cm 2 *55,000kg TDS009
DCSC61212LPY 160mm 300mm 300mm 11.5kg Hi-Vis Yellow *60.8kg/cm 2 *55,000kg TDS009P
DCSC61224LB 160mm 300mm 600mm 22.7kg Black *60.8kg/cm 2 *110,000kg TDS001
DCSC61224LPY 160mm 300mm 600mm 22.7kg Hi-Vis Yellow *60.8kg/cm 2 *110,000kg TDS001P
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

4 6
heavy duty construction jacking and
cribbing blocks
dura crib Heavy Duty Construction Jacking and Ultra-strength black
cribbing blocks are a purpose built tool unsafe Tested under the guidance of AS1170.0.2002 and
designed to replace timber blocks that had tradition- AS2498.3.1998
ally been used to stabilise machinery and equipment
100% recycled high density polyethylene (HDPE)
during repair and maintenance or storage. The pyra- construction for durability
Light Weight
and top that interlock the blocks at any angle when
used in cribbing stacks. These blocks are ideal in high Resistant to fuels, oils and most common industrial
tonnage load bearing stabilising applications like solvents and chemicals
large structures, bull dozers, scrapers, graders and Will not splinter or rot
alike. The DCHDC4410LB and DCHDC6710LB are Non-conductive
perfect inclusion in service van tool kits as the are Sturdy lanyard for ease of handling
compact with high load bearing capacity. While the
Operating Temperature range -40C to +75C
DCHDC4430LB and DCHDC6730LB provide large load
bearing capabilities ideal for workshop stabilising 50 Year warranty against splitting, rotting, absorption,
tasks. termites and mould

Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCHDC4410LB 110mm 110mm 250mm 2.2kg Black *60.8kg/cm 2 *16,800kg TDS014
DCHDC4410LPY 110mm 110mm 250mm 2.2kg Hi-Vis Yellow *60.8kg/cm 2 *16,800kg TDS014P
DCHDC4430LB 110mm 110mm 755mm 6.7kg Black *60.8kg/cm 2 *50,400kg TDS005
DCHDC4430LPY 110mm 110mm 755mm 6.7kg Hi-Vis Yellow *60.8kg/cm 2 *50,400kg TDS005P
DCHDC6710LB 155mm 180mm 250mm 5.8kg Black *60.8kg/cm 2 *23,700kg TDS002
DCHDC6710LPY 155mm 180mm 250mm 17.5kg Hi-Vis Yellow *60.8kg/cm 2 *23,700kg TDS002P
DCHDC6730LB 155mm 180mm 755mm 17.5kg Black *60.8kg/cm 2 *71,600kg TDS006
DCHDC6730LPY 155mm 180mm 755mm 17.5kg Hi-Vis Yellow *60.8kg/cm 2 *71,600kg TDS006P
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

5
hybrid jacking and cribbing blocks
dura crib Hybrid Jacking and cribbing blocks are a Hi-visibility painted yellow or standard black
purpose built tool designed to replace unsafe timber Tested under the guidance of AS1170.0.2002 and
blocks that had traditionally been used to stabilise AS2498.3.1998
machinery and equipment under repair, maintenance or
100% recycled high density polyethylene (HDPE)
storage. The unique feature of the hybrid jacking and construction for durability
cribbing block is the three side notches. This feature
Light Weight
allows the blocks to interlock to a maximum height of 3
times the length of the block and provide secure stacking Resistant to fuels, oils and most common industrial
performance and stability in the event of unintentional solvents and chemicals
movement. The pyramid surfaces of the hybrid cribbing Will not splinter or rot
block allow irregular shaped cribbing stacks and stack Non-conductive
positions to be achieved and still provide optimum Sturdy lanyard for ease of handling
safety.
Operating Temperature range -40C to +75C
50 Year warranty against splitting, rotting,
absorption, termites and mould

Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

85mm x 105mm

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCPL4418LB 85mm 105mm 465mm 2.7kg Black *51.7kg/cm 2 *25,000kg TDS003
DCPL4418LPY 85mm 105mm 465mm 2.7kg Hi-Vis Yellow *51.7kg/cm 2 *25,000kg TDS004P

Ask for details on


our crib toters and
carriers

*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

6
prime jacking and cribbing block
dura crib Prime Crib Jacking and cribbing blocks are a Hi-visibility painted yellow or standard black
purpose built tool designed to replace unsafe timber Tested under the guidance of AS1170.0.2002 and
blocks that had traditionally been used to stabilise AS2498.3.1998
machinery and equipment during repair and maintenance
100% recycled high density polyethylene (HDPE)
construction for durability
secure base and top that interlock at any angle. Three side
Light Weight
notches interlock for secure stacking performance.
Positive interlocking by gravity and friction prove premi- Resistant to fuels, oils and most common industrial
um stability and load bearing capacity. Excellent for four solvents and chemicals
point and 9 point cribbing stacks ranging in stack load Will not splinter or rot
capacity between 58,800kgs and 132,000kg. The dura crib Non-conductive
prime crib is an excellent alternative to timber dunnage Sturdy lanyard for ease of handling
and blocks used in jacking and stabilising task. The dura
Operating Temperature range -40C to +75C
working load limit of 60.8kg/cm2 with a maximum work- 50 Year warranty against splitting, rotting,
ing load capacity *58,000kg/cm2. Made from recycled absorption, termites and mould
plastic the dura crib prime cribbing block is not only safer
than timber, it is great for the environment. Timber blocks
being used for jacking are a thing of the past.

Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCPC6724LB 160mm 175mm 600mm 12.5kg Black 60.8kg/cm 2 *58,000kg TDS029
DCPC6724LPY 160mm 175mm 600mm 12.5kg Hi-Vis Yellow 60.8kg/cm 2
*58,000kg TDS029P

*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

7
pyramid jacking and cribbing blocks
dura crib Pyramid jacking and cribbing blocks are a
purpose built tool designed to replace unsafe timber
blocks that had traditionally been used to stabilise
machinery and equipment during repair and mainte-

provides a secure base and top that interlock at any

larger dura crib jacking and cribbing blocks are used to


stabilise equipment.

Available in painted hi-visibility yellow and standard black


Tested under the guidance of AS1170.0.2002 and
AS2498.3.1998
100% recycled high density polyethylene (HDPE)
construction for durability
Light Weight
Resistant to fuels, oils and most common industrial
solvents and chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40C to +75C
50 Year warranty against splitting, rotting, absorption,
termites and mould

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCP2418LB 45mm 90mm 450mm 1.4kg Black 60.8kg/cm 2 *25,000kg TDS012
DCP2418LPY 45mm 90mm 450mm 1.4kg Hi-Vis Yellow 60.8kg/cm 2 *25,000kg TDS013P

45mm x 90mm

Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

8
super jacking and cribbing block
dura crib Super Crib Jacking and cribbing blocks are a Hi-visibility painted yellow or standard black
purpose built tool designed to replace timber blocks that Tested under the guidance of AS1170.0.2002 and
had traditionally been used to stabilise machinery and AS2498.3.1998
equipment during repair and maintenance or storage. 100% recycled high density polyethylene (HDPE)
With a working load limit of 51.7kg/cm2 enables these construction for durability
tools to be used to stabilise heavy machines and equip-
Light Weight
ment. The Super Crib Jacking and Cribbing block is an
excellent alternative to steel vehicle and equipment Resistant to fuels, oils and most common industrial
stands. The unique interlocking feature of this jacking solvents and chemicals
block ensures the safest cribbing block box stacks when Will not splinter or rot
working on machines and equipment. In addition, the Non-conductive
Sturdy lanyard for ease of handling
that can be used on non-square cribbing block stacks.
Operating Temperature range -40C to +75C
50 Year warranty against splitting, rotting,
absorption, termites and mould

Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

160mm x 175mm

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCSC6724LB 160mm 175mm 600mm 11.3kg Black *51.7kg/cm 2 *49,900kg TDS007
DCSC6724LPY 160mm 175mm 600mm 11.3kg Black *51.7kg/cm2 *49,900kg TDS008P
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

9
super crib
dura crib Super Cribbing is active cribbing and Ultra-strength black Working Load Limit (WLL)
is used when a person is working on or near a 60.8Kg/cm2
structure or work piece being stabilised. The Tested under the guidance of AS1170.0.2002 and
AS2498.3.1998
base and top that interlock at any angle. Three 100% recycled high density polyethylene (HDPE)
side notches interlock for secure stacking construction for durability
performance. Light Weight
Resistant to fuels, oils and most common chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40C to +80C
50 Year warranty against splitting, rotting, absorption,
termites and mould

Slip resistant pyramid locking 95mm x 100mm


surface creates a stronger,
more stable base than wood.

145mm x 140mm Slip resistant pyramid locking


surface creates a stronger,
more stable base than wood.

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCSC4436LB 95mm 100mm 915mm 6.8kg Black *60.8kg/cm 2 *53,200kg TDS015
DCSC4436LPY 95mm 100mm 915mm 6.8kg Hi-Vis Yellow *60.8kg/cm 2 *53,200kg TDS015P
DCSC6636LB 145mm 140mm 915mm 13.9kg Black *60.8kg/cm 2 *78,400kg TDS016
DCSC6636LPY 145mm 140mm 915mm 13.9kg Hi-Vis Yellow *60.8kg/cm 2 *78,400kg TDS016P
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

10
modpad stabilsing pad
The dura crib MODPAD is a versatile stabilising Available in standard black
product that can be used as a top and bottom locking Tested under the guidance of AS1170.0.2002 and
plate used in cribbing stacks or as a single outrigger AS2498.3.1998
pad. When Pyramid surfaces on the MODPAD and the
100% recycled high density polyethylene (HDPE)
dura crib jacking and cribbing blocks interlock to construction for durability
provide positive locking providing optimum stability
Light Weight
of the stack. In addition the MODPAD can be issued as
a single outrigger pad. Resistant to fuels, oils and most common industrial
solvents and chemicals
Will not splinter or rot
Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40C to +75C
50 Year warranty against splitting, rotting,
absorption, termites and mould

Image shows the dura crib


top and bottom plate being
used on a stack of super cribs

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCTBP2424LB 50mm 600mm 600mm 17.5kg Black 60.8kg/cm 2 *218,000kg TDS601
DCTBP1818LB 35mm 450mm 450mm 6.5kg Black 60.8kg/cm 2 *123,000kg TDS602
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

11 10
lock block jacking and cribbing blocks
dura crib Lock blocks are a purpose built tool designed Hi-visibility painted yellow or standard black
to replace unsafe timber blocks that had traditionally Ultra-strength black
been used to stabilise machinery and equipment used
Tested under the guidance of AS1170.0.2002 and
repair and maintenance or storage. The dura Crib lock
AS2498.3.1998
block is a very versatile jacking and stabilising block
used in a single block or multiples used to create a 100% recycled high density polyethylene (HDPE)
construction for durability
stable platform on almost any surface. The moulded
grid pattern enable interlocking for cribbing block Light Weight
stack reducing potential slippage for non-direct Resistant to fuels, oils and most common industrial
applied load. This high load bearing compact cribbing solvents and chemicals
tool is an excellent tool addition to the work service ute Will not splinter or rot
or truck. Non-conductive
Sturdy lanyard for ease of handling
Operating Temperature range -40C to +75C
50 Year warranty against splitting, rotting,
absorption, termites and mould

Technical Data Sheet


Code Height Width Length Weight Colour WLL @25 C Block Total WLL @25 C
(TDS)
DCLB199B 35mm 225mm 225mm 1.3kg Black *60.8kg/cm2 *31,100kg TDS017
DCLB199PY 35mm 225mm 225mm 1.3kg Hi-Vis Yellow *60.8kg/cm2 *31,100kg TDS018P
DCLB299B 55mm 225mm 225mm 2.0kg Black *60.0kg/cm2 *31,100kg TDS019
DCLB299PY 55mm 225mm 225mm 2.0kg Hi-Vis Yellow *60.8kg/cm2 *31,100kg TDS020P
DCLB399B 80mm 225mm 225mm 3.2kg Black *60.0kg/cm2 *31,100kg TDS021
DCLB399PY 80mm 225mm 225mm 3.2kg Hi-Vis Yellow *60.8kg/cm2 *31,100kg TDS022P
*Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

12
jacking and cribbing wedges
As almost every cribbing situation involves uneven surfacesand wedges should be used

between the stacked cribbing and the structure, product or vehicle being secured.
Wedges should be similar width as the cribbing block or stack. By using wedges almost

yellow or standard black material.

standard wedges Convenient lanyard for ease of handling


Model Height Width Length Weight Colour
DCW2412LB 35mm 85mm 305mm 0.6kg Black
DCW2412LY 35mm 85mm 305mm 0.6kg Hi-Vis Yellow
DCW4420LB 90mm 90mm 485mm 1.3kg Black
DCW4420LY 90mm 90mm 485mm 1.3kg Hi-Vis Yellow
DCW6724LB 150mm 130mm 610mm 6.0kg Black
DCW6724LY 150mm 130mm 610mm 6.0kg Hi-Vis Yellow

stepped wedges Standard Black or His-Vis Yellow finish


Stepped top surface for improved grip
Optional lanyard available
Model Height Width Length Weight Colour
DCW3B 75mm 75mm 220mm 0.6kg Black
DCW3Y 75mm 75mm 220mm 0.6kg Hi-Vis Yellow
DCW6B 75mm 150mm 220mm 1.2kg Black
DCW6Y 75mm 150mm 220mm 1.2kg Hi-Vis Yellow
DCW12B 75mm 305mm 220mm 2.4kg Black
DCW12Y 75mm 305mm 220mm 2.4kg Hi-Vis Yellow

pyramid face wedges Aggressive surface contact with the structure, product, vehicle or underlayment

Model Height Width Length Weight Surface Colour


DCPW4419B 90mm 90mm 460mm 1.5kg Down Black
DCPW6724B 160mm 180mm 600mm 2.2kg Down Black

mini wedges Ideal for holding doors ajar and emergency sprinkler terminations
Model Height Width Length Weight Colour
WITY 40mm 15mm 145mm 0.05kg Yellow
WITP 40mm 15mm 145mm 0.05kg Pink
WITN 40mm 15mm 145mm 0.05kg Neon

handled wedges Convenient integrated sturdy handle


Model Height Width Length Weight Colour
RRSWORD 70mm 60mm 505mm 1.3kg Black

13
jacking and stabilising gluts
dura stat block and gluts are load rated support Designed for single layer use
products. They can be used when high load bearing Working load limit of 33.4kg/cm2
capacity support blocks are needed for storing Available in standard black or hi-visibility (painted) yellow.
equipment and machinery. Ideal for outdoor and Tested under the guidance of AS1170.0.2002 and
AS2498.3.1998
fuels, oils and most common industrial chemicals. Large selection of sizes to suit almost all application.
Warping, splintering and support failure can begin 100% recycled high density polyethylene (HDPE)
with traditional timber blocks after just a very short construction for durability
time when exposed to the elements and aging. Being Resistant to fuels, oil and most commonly used chemicals
made from 100% recycled Plastic (HDPE) the dura Non-conductive
Light Weight
aging process.
Will not splinter or rot
Sturdy lanyard for ease of handling
Operating temperature -400C to +750C
50 Year warranty against splitting, rotting, absorption,
termites and mould

Model Height Width Length Weight Colour WLL @25 C Block Total WLL Technical Data Sheet
@25 C (TDS)
DSG3412LB 65mm 90mm 300mm 1.6kg Black *33.4kg/cm2 *6,700kg TDS503
DGS3412LPY 65mm 90mm 300mm 1.6kg Hi-Vis Yellow *33.4kg/cm2 *6,700kg TDS504P
DSG3424LB 65mm 90mm 600mm 3.2kg Black *33.4kg/cm2 *13,500kg TDS501
DSG3424LPY 65mm 90mm 600mm 3.2kg Hi-Vis Yellow *33.4kg/cm2 *13,500kg TDS502P
DSG3436LB 65mm 90mm 900mm 4.8kg Black *33.4kg/cm2 *20,200kg TDS505
DSG3436LPY 65mm 90mm 900mm 4.8kg Hi-Vis Yellow *33.4kg/cm2 *20,200kg TDS506P
DSG3448LB 65mm 90mm 1200mm 9.6kg Black *33.4kg/cm2 *27,000kg TDS507
DSG3448LPY 65mm 90mm 1200mm 9.6kg Hi-Vis Yellow *33.4kg/cm2 *27,000kg TDS508P
DSG4412LB 90mm 90mm 300mm 2kg Black *33.4kg/cm2 *9,300kg TDS509
DGS4412LPY 90mm 90mm 300mm 2kg Hi-Vis Yellow *33.4kg/cm2 *9,300kg TDS510P
DSG4424LB 90mm 90mm 600mm 4kg Black *33.4kg/cm2 *18,700kg TDS511
DSG4424LPY 90mm 90mm 600mm 4kg Hi-Vis Yellow *33.4kg/cm2 *18,700kg TDS512P
DSG4436LB 90mm 90mm 900mm 6kg Black *33.4kg/cm2 *28,100kg TDS513
DSG4436LPY 90mm 90mm 900mm 6kg Hi-Vis Yellow *33.4kg/cm2 *28,100kg TDS514P
DSG4448LB 90mm 90mm 1200mm 6kg Black *33.4kg/cm2 *37,400kg TDS515
DSG4448LPY 90mm 90mm 1200mm 6kg Hi-Vis Yellow *33.4kg/cm2 *37,400kg TDS516P
DSG31012LB 65mm 210mm 300mm 4.4kg Black *33.4kg/cm2 *21,900kg TDS517
DGS31012LPY 65mm 210mm 300mm 4.4kg Hi-Vis Yellow *33.4kg/cm2 *21,900kg TDS518P
DSG31024LB 65mm 210mm 600mm 8.8kg Black *33.4kg/cm2 *42,600kg TDS519
DSG31024LPY 65mm 210mm 600mm 8.8kg Hi-Vis Yellow *33.4kg/cm2 *42,600kg TDS520P
DSG31036LB 65mm 210mm 900mm 13.2kg Black *33.4kg/cm2 *65,500kg TDS521
DSG31036LPY 65mm 210mm 900mm 13.2kg Hi-Vis Yellow *33.4kg/cm2 *65,500kg TDS522P
DSG31048LB 65mm 210mm 1200mm 26.4kg Black *33.4kg/cm2 *87,300kg TDS523
DSG31048LPY 65mm 210mm 1200mm 26.4kg Hi-Vis Yellow *33.4kg/cm2 *87,300kg TDS524P
DSG6812LB 140mm 185mm 300mm 9.8kg Black *33.4kg/cm2 *14,500kg TDS525
DSG6812LPY 140mm 185mm 300mm 9.8kg Hi-Vis Yellow *33.4kg/cm2 *14,500kg TDS526P
DSG6824LB 140mm 185mm 600mm 19.6kg Black *33.4kg/cm2 *29,100kg TDS529
DSG6824LPY 140mm 185mm 600mm 19.6kg Hi-Vis Yellow *33.4kg/cm2 *29,100kg TDS530P
DSG6836LB 140mm 185mm 900mm 39.4kg Black *33.4kg/cm2 *43,600kg TDS531P
DSG6836LPY 140mm 185mm 900mm 39.4kg Hi-Vis Yellow *33.4kg/cm2 *43,600kg TDS532P
DSG6848LB 140mm 185mm 1200mm 58.8kg Black *33.4kg/cm2 *58,200kg TDS533
DSG6848LPY 140mm 185mm 1200mm 58.8kg Hi-Vis Yellow *33.4kg/cm2 *58,200kg TDS534P

* Block Total Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the block. Refer technical data sheet for more information.

14
dura stat static composite lumber
dura stat composite lumber is most similar to ordinary wood lumber in that it does not interlock. dura stat
is available in round, square, and rectangle shapes. However it is very di rent in many ways to wood.
Repeatable formulation of the plastic material
Repeatable manufacturing process
Consistent quality control testing
sheet material storage
Repeatable lab testing for tensile strength, Provides spacing for easy pick up with
PSI and other required testing a forklift. Choose from 40mmx90mm
*50 Year Warranty or 90mmx90mm, variable lengths.
3 shape profiles to choose from
*Against splitting, rot, fluid absorption, termites or mold

tool storage blocking

rectangular plastic lumber


Code Actual Imperial Metric Size Weight
Size - nominal mm - nominal
DSRT2372B 1-1/2x2-1/2x6 35x65x1800 4.9kg
DSRT23144B 1-1/2x2-1/2x12 35x65x3600 9.3kg
DSRT2472B 1-1/2x3-1/2x6 35x90X1800 6.3kg
DSRT2496B 1-1/2x3-1/2x8 35x90x2400 8.8kg
DSR24144B 1-1/2x3-1/2x12 35x90x3600 12.7kg
DSRT2672B 1-1/2x5-1/2x6 35x140x1800 9.8kg square plastic lumber
DSRT2696B 1-1/2x5-1/2x8 35x140x2400 12.7kg Code Actual Imperial Metric Size Weight
DSRT26144B 1-1/2x5-1/2x12 35x140x3600 19.0kg Size - nominal mm - nominal
DSRT2872B 1-1/2x7-1/4x6 35x185x1800 12.7kg
DSSQ2272B 1-1/2x1-1/2x6 35x35x1800 2.4kg
DSRT2896B 1-1/2x7-1/4x8 35x185x2400 16.6kg
DSSQ2296B 1-1/2x1-1/2x8 35x35x2400 3.2kg
DSRT28144B 1-1/2x7-1/4x12 35x185x3600 24.9kg
DSSQ22144B 1-1/2x1-1/2x12 25x35x3600 4.8kg
DSRT21072B 1-1/2x9-1/4x6 35x235x1800 17.6kg
DSSQ4472B 3-1/2x3-1/2x6 90x90x1800 12.4kg
DSRT21096B 1-1/2x9-1/4x8 35x235x2400 23.4kg
DSSQ4496B 3-1/2x3-1/2x8 90x90x2400 16.4kg
DSRT210144B 1-1/2x9-1/4x12 35x235x3600 35.6kg
DSSQ44144B 3-1/2x3-1/2x12 90x90x3600 24.4kg
DSRT3472B 2-1/2x3-1/2x6 65x90x1800 10.2kg
DSRT3496B 2-1/2x3-1/2x8 65x90x2400 13.7kg
DSRT34144B 2-1/2x3-1/2x12 65x90x3600 20.5kg
DSRT31072B 2-1/2x9-1/4x6 65x240x1800 28.3kg
DSRT31096B 2-1/2x9-1/4x8 65x240x2400 37.1kg
DSRT310144B 2-1/2x9-1/4x12 65x240x3600 56.1kg
DSRT46144B 3-1/2x5-1/2x12 90x140x3600 38.5kg round plastic lumber
DSRT6696B 5-1/2x5-1/2x8 140x140x1800 38.5kg
Code Actual Imperial Metric Size Weight
DSRT6896B 5-1/2x7-1/4x8 140x185x1800 53.7kg
Size - nominal mm - nominal
DSRD472B 4 Dia 72 100mm Dia 1800 28.4kg
DSRD496B 4 Dia 96 100mm Dia 2400 37.6kg
DSRD4144B 4 Dia 144 100mm Dia 3600 53.7kg

15
Why are dura crib and
dura stat cribbing
blocks better than
timber dunnage
when stabilising
equipment?

Timber Cribbing block showing


typical splitting and cracking.
Is this safe to use?

Unlike timber, all dura crib and dura stat

purposed cribbing, blocking and stabilisation


tools. They are made using strict production
Dura Crib DCHDC6730LB and quality control processes with a known
Heavy Duty Cribbing Block. repeatable formula ensuring consistent end
Engineered support block. product performance and operation
characteristics. Being engineered tools made
from recycled high density polyethylene all
dura crib and dura stat blocks are
non-absorbent and will not split,
splinter or rot like timber.
cibandmatco 160617-1

Cribbing and Matting Co Pty Ltd


Unit 9, 12 Abbott Road, Seven Hills NSW 2147 Australia
Ph: +61 (0)2 9674 74 28 | Fax: +61 (0)2 9674 2724
Email: info@cribandmatco.com.au | www.cribandmatco.com.au

Anda mungkin juga menyukai