Anda di halaman 1dari 188

Motor Handbook

Sixth Edition, April 2006


Version 1.3
This Handbook Is Intended To Be An Aid To The Operator
And Is Solely Provided For Information And Illustration
Purposes.
Please Feel Free To Contact Any Of Our Locations With
Questions Not Answered In This Handbook.

The Technical Data And Text In This Handbook Is Subject


To Change Without Notice.

Sixth Edition (2006) [Version 1.3]

Made in Canada

ISO 9001: 2000

Licensed
Manufacturer
Under: 09696:801197
API Spec. 7 - License Number 7-0063 09696:802078

Website: www.nov.com Email: DHPSales@nov.com


Contents

1. General ................................................................ 1-1


Preface .......................................................................1-1
Background ................................................................1-1
Economics ..................................................................1-2
Glossary of Terms ......................................................1-2
2. Motor Selection .................................................... 2-1
Versatility ....................................................................2-1
3. Motor Components............................................... 3-1
Dump Sub...................................................................3-2
Power Section ............................................................3-2
Adjustable Housing.....................................................3-3
Fixed Housing.............................................................3-3
Articulated Driveshaft .................................................3-4
Sealed Bearing Assembly ..........................................3-4
Stabilizers ...................................................................3-5
4. Servicing .............................................................. 4-1
5. Operation ............................................................. 5-1
Preparation for Running and Rig Site Motor Test.......5-1
Running In ..................................................................5-2
Starting the Motor .......................................................5-2
Drilling.........................................................................5-2
Reactive Torque .........................................................5-3
Stalling........................................................................5-4
Over-running the Bit ...................................................5-4
Rotary RPM ................................................................5-5
Motor Pressure Drop ..................................................5-5
Bit Pressure Drop .......................................................5-5
Drilling Fluids ..............................................................5-6
Oil Based Drilling Fluids ......................................5-6
H2S (Sour) Service.............................................5-7
Down-hole Temperature.............................................5-8
Plugging Off................................................................5-8
Hydraulic Extension....................................................5-9
Partial Rotor Bypass...................................................5-9
Tripping Out of the Hole and Checking the Tool ......5-10
Rig Site Maintenance................................................5-10
6. Applications.......................................................... 6-1
Deflection Devices......................................................6-1
Steerable Systems .....................................................6-1
Performance Drilling ...................................................6-2

-I-
Re-Entry Medium Radius Drilling/Horizontal Drilling
Systems...............................................................6-2
Short Radius Drilling Systems ....................................6-3
Milling..........................................................................6-3
Coring .........................................................................6-4
Ratholes, Mouseholes and Spudding.........................6-4
Workover ....................................................................6-4
7. Air or Two-Phase Drilling ..................................... 7-1
Selection / Startup ......................................................7-1
Fluid / Lubricant Requirements...................................7-2
Pressures ...................................................................7-3
Temperature ...............................................................7-3
Volume Requirements ................................................7-3
Operation....................................................................7-3
Drilling with Nitrogen (N2) ...........................................7-4
8. Fishing Information/Safety Features .................... 8-1
9. Trouble Shooting.................................................. 9-1
Sudden Pressure Increase .........................................9-1
No Penetration............................................................9-1
Slow Pressure Decrease ............................................9-1
10. Motor Performance Summary............................ 10-1
Availability of Power Sections ..................................10-7
11. Motor Performance Data.................................... 11-1
1 7/16 1/2 High Speed 3.0 Stage 11-4
1 11/16 5/6 Multi-Lobe 2.5 Stage 11-6
1 11/16 5/6 Multi-Lobe 4.4 Stage 11-8
1 11/16 5/6 Multi-Lobe 5.0 Stage 11-10
2 1/8 5/6 Multi-Lobe 3.0 Stage 11-12
2 1/8 5/6 Multi-Lobe 6.0 Stage 11-14
2 3/8 1/2 High Speed 7.0 Stage 11-16
2 3/8 2/3 Multi-Lobe 4.0 Stage 11-18
2 3/8 4/5 Multi-Lobe 3.0 Stage 11-20
2 3/8 5/6 Multi-Lobe 2.5 Stage 11-22
2 3/8 5/6 Multi-Lobe 5.2 Stage 11-24
2 3/8 7/8 Multi-Lobe 4.0 Stage 11-26
2 7/8 1/2 High Speed 5.2 Stage 11-28
2 7/8 1/2 High Speed 7.0 Stage 11-30
2 7/8 3/4 Multi Lobe 4.0 Stage 11-32
2 7/8 4/5 Multi-Lobe 3.0 Stage 11-34
2 7/8 5/6 Multi Lobe 3.3 Stage 11-36
2 7/8 5/6 Multi-Lobe 4.7 Stage 11-38
2 7/8 5/6 Multi-Lobe 4.7 Stage - 4 11-40
2 7/8 5/6 Multi-Lobe 7.0 Stage 11-42

- II -
2 7/8 5/6 Multi-Lobe 7.0 Stage - 4 11-44
2 7/8 7/8 Multi-Lobe 1.5 Stage 11-46
2 7/8 7/8 Multi-Lobe 1.5 Stage - 4 11-48
2 7/8" 7/8 Multi-Lobe 2.0 Stage (Air) 11-50
2 7/8" 7/8 Multi-Lobe 2.0 Stage - 4 11-52
2 7/8 7/8 Multi-Lobe 2.5 Stage 11-54
2 7/8" 7/8 Multi-Lobe 2.5 Stage - 4 11-56
3 1/8 5/6 Multi-Lobe 3.5 Stage 11-58
3 1/8 7/8 Multi-Lobe 3.0 Stage 11-60
3 1/8 7/8 Multi-Lobe 4.0 Stage 11-62
3 3/8 1/2 High Speed 5.5 Stage 11-64
3 3/8 4/5 Multi-Lobe 5.0 Stage 11-66
3 3/8 7/8 Multi-Lobe 3.0 Stage 11-68
3 1/2 4/5 Multi-Lobe 4.0 Stage 11-70
3 1/2 5/6 Multi-Lobe 2.0 Stage 11-72
3 1/2 5/6 Multi-Lobe 2.0 Stage - 4 11-74
3 1/2 5/6 Multi-Lobe 3.0 Stage 11-76
3 1/2 7/8 Multi-Lobe 3.8 Stage 11-78
3 1/2 7/8 Multi-Lobe 4.3 Stage 11-80
3 3/4 1/2 High Speed 4.4 Stage 11-82
3 3/4" 3/4 Multi-Lobe 9.0 Stage 11-84
3 3/4 4/5 Multi-Lobe 3.5 Stage 11-86
3 3/4 5/6 Multi-Lobe 5.0 Stage (OS) 11-88
3 3/4 6/7 Multi-Lobe 3.0 Stage 11-90
3 3/4 7/8 Multi-Lobe 2.0 Stage 11-92
3 3/4 7/8 Multi-Lobe 2.3 Stage 11-94
3 3/4 7/8 Multi-Lobe 2.3 Stage - 4 11-96
3 3/4 7/8 Multi-Lobe 6.7 Stage 11-98
3 3/4" 7/8 Multi-Lobe 10.1 Stage 11-100
4 3/4 1/2 High Speed 3.0 Stage 11-102
4 3/4" 1/2 High Speed 4.0 Stage 11-104
4 3/4 1/2 High Speed 6.5 Stage 11-106
4 3/4" 2/3 Multi-Lobe 8.0 Stage 11-108
4 3/4" 3/4 Multi-Lobe 9.9 Stage 11-110
4 3/4 4/5 Multi-Lobe 3.5 Stage 11-112
4 3/4 4/5 Multi-Lobe 6.0 Stage 11-114
4 3/4 4/5 Multi-Lobe 6.3 Stage 11-116
4 3/4 5/6 Multi-Lobe 3.0 Stage 11-118
4 3/4 5/6 Multi-Lobe 3.0 Stage - 4 11-120
4 3/4" 5/6 Multi-Lobe 8.3 Stage 11-122
4 3/4" 6/7 Multi-Lobe 6.0 Stage 11-124
4 3/4 7/8 Multi-Lobe 2.0 Stage (Air) 11-126
4 3/4 7/8 Multi-Lobe 2.0 Stage - 4 11-128
4 3/4 7/8 Multi-Lobe 2.2 Stage 11-130
4 3/4 7/8 Multi-Lobe 2.2 Stage - 4 11-132

- III -
4/3/4 7/8 Multi-Lobe 3.8 Stage 11-134
5 6/7 Multi-Lobe 6.0 Stage 11-136
5 6/7 Multi-Lobe 7.0 Stage 11-138
5 6/7 Multi-Lobe 8.0 Stage 11-140
6 1/4 1/2 High Speed 4.0 Stage 11-142
6 1/4 4/5 Multi-Lobe 4.3 Stage 11-144
6 1/4 4/5 Multi-Lobe 7.5 Stage 11-146
6 1/4 5/6 Multi-Lobe 5.0 Stage 11-148
6 1/4 5/6 Multi-Lobe 5.5 Stage 11-150
6 1/4 7/8 Multi-Lobe 2.8 Stage 11-152
6 1/4 7/8 Multi-Lobe 2.9 Stage 11-154
6 1/4 7/8 Multi-Lobe 3.0 Stage 11-156
6 1/4 7/8 Multi-Lobe 4.8 Stage 11-158
6 3/4" 1/2 High Speed 3.0 Stage 11-160
6 3/4 1/2 High Speed 4.0 Stage 11-162
6 3/4 2/3 Multi-Lobe 7.0 Stage (OS) 11-164
6 3/4 4/5 Multi-Lobe 4.8 Stage 11-166
6 3/4 4/5 Multi-Lobe 7.0 Stage 11-168
6 3/4 5/6 Multi-Lobe 5.0 Stage 11-170
6 3/4 6/7 Multi-Lobe 5.0 Stage 11-172
6 3/4 6/7 Multi-Lobe 6.0 Stage 11-174
6 3/4 7/8 Multi-Lobe 2.0 Stage (Air) 11-176
6 3/4 7/8 Multi-Lobe 2.9 Stage 11-178
6 3/4 7/8 Multi-Lobe 3.0 Stage 11-180
6 3/4 7/8 Multi-Lobe 3.5 Stage 11-182
6 3/4 7/8 Multi-Lobe 5.0 Stage 11-184
6 3/4 7/8 Multi-Lobe 5.7 Stage 11-186
6 3/4 7/8 Multi-Lobe 6.4 Stage 11-188
7 7/8 Multi-Lobe 6.0 Stage 11-190
7 7/8 Multi-Lobe 7.5 Stage 11-192
7 3/4 (8") 1/2 High Speed 4.0 Stage 11-194
7 3/4 (8") 4/5 Multi-Lobe 3.6 Stage 11-196
7 3/4 (8") 4/5 Multi-Lobe 5.3 Stage 11-198
7 3/4 (8") 5/6 Multi-Lobe 5.0 Stage 11-200
7 3/4 (8") 6/7 Multi-Lobe 4.0 Stage 11-202
7 3/4" (8") 7/8 Multi-Lobe 2.0 Stage (Air) 11-204
7 3/4" (8") 7/8 Multi-Lobe 3.0 Stage 11-206
7 3/4" (8") 7/8 Multi-Lobe 4.0 Stage 11-208
8" 6/7 Multi-Lobe 5.0 Stage 11-210
9 5/8 1/2 High Speed 4.0 Stage 11-212
9 5/8 2/3 Multi-Lobe 7.5 Stage 11-214
9 5/8 3/4 Multi-Lobe 4.5 Stage 11-216
9 5/8 3/4 Multi-Lobe 6.0 Stage 11-218
9 5/8 5/6 Multi-Lobe 3.0 Stage 11-220
9 5/8 5/6 Multi-Lobe 4.0 Stage 11-222

- IV -
9 5/8" 6/7 Multi-Lobe 5.0 Stage 11-224
9 5/8" 6/7 Multi-Lobe 6.0 Stage 11-226
9 5/8" 7/8 Multi-Lobe 5.7 Stage 11-228
11 1/4 3/4 Multi Lobe 3.6 Stage 11-230
11 1/4 5/6 Multi Lobe 4.6 Stage 11-232
11 1/4 6/7 Multi Lobe 3.0 Stage 11-234

12. Adjustable Housing Operating Instructions ........ 12-1


13. Nozzle Selection and Replacement ................... 13-1
14. Engineering Data ............................................... 14-1
Formulas...................................................................14-1
Imperial Conversions................................................14-2
Metric Conversions...................................................14-4
Millimeter Equivalents of Common Inch
Measurements...................................................14-6
Millimeter and Decimal Equivalents..........................14-7
Buoyancy Factor for Steel Drill Collars.....................14-8
Collar Weights in Pounds per Foot...........................14-9
Drill Collar Connection Make-up Torque ................14-10
Properties of Drill Pipes and Tool Joints.................14-20
Mechanical Properties of Drill Pipe.........................14-28
Heavy Walled Drill Pipe ..........................................14-32
Drill Bit Sizes ..........................................................14-33
Hole Curvature .......................................................14-34
15. Drilling Tool Data................................................ 15-1
Hydraulic Mechanical Drilling Jars............................15-1
Double Acting Hydraulic Mechanical Drilling Jars ....15-3
Power Stroke Hydraulic Jars ....................................15-5
Shock Tools..............................................................15-6

-V-
GENERAL

Preface
Positive Displacement Motors (PDMs) have gained a wide
acceptance in the industry. The Vector motor contains many
unique features. For example, the Vector motor utilizes a rig
floor adjustable bent housing between the motor section and the
sealed bearing assembly. No drilling fluid passes through the
bearings. The sealed bearing assembly contains anti-friction
bearings sealed in oil. The rugged articulated driveshaft is sealed
and lubricated for long service.

Background
National Oilwell Varco, an integrated drilling solutions
company, is a worldwide leader in the design, manufacture and
sale of machinery, equipment, and downhole tools, used in the oil
and gas drilling and production industries.
National Oilwell Varco designs, manufactures and markets a
broad range of downhole products within the Downhole Tools
operations. These include highly engineered drilling mud motors
for straight hole, directional, short radius and horizontal drilling, in
addition to coring, coiled tubing, steerable, workover and
intervention applications.
National Oilwell Varco combined the operations of Griffith
Oil Tool and Vector Oil Tool. These companies combined in
1996 to create an organization with fully integrated engineering,
manufacturing and rental services as well as a worldwide network
of sales and service locations. National Oilwell Varco Downhole
Tools makes its technologies available through rent, lease, or sale.
The company offers innovative asset management programs
designed to manage fleet costs and performance.
Griffith Oil Tool was founded in 1974 to develop products for
the drilling industry. These products now include: Hydraulic
Mechanical (Double and Single Acting) Drilling Jars, Mechanical
And Combination Drilling Jars, Shock Subs, Fishing and Coring
Jars, Bumper Subs, Jar Intensifiers, Stabilizers, Reamers, Kelly
Valves, Inside Blow Out Preventors, Drop In Check and Wireline
Retrievable Safety Valves, Torquemaster Breakout Units, and
Service Centers. In 1985 Griffith Oil Tool began its development
and design of downhole motors and related accessories marketed
under the Trudril trade name.
Vector Oil Tool was founded in 1990 to design and
manufacture drilling motors and related components.
National Oilwell Varco Downhole Tools manufactures the
components used in downhole products according to strict quality

1-1
assurance and control procedures. National Oilwell Varco
Downhole Tools is an ISO 9001 Registered Firm, and is licensed
to monogram API Products under Spec 7 License No. 7-0063.

Economics
The increasing reliability of drilling motors in combination with
improved drill bit designs and measurement while drilling (MWD)
systems now present operators with alternatives to rotary drilling in
an increasing number of applications.
It is generally acknowledged that an effective downhole
motor, matched to the drill bit and formation, provides better rates
of penetration than rotary drilling.
In addition to increasing rate of penetration, a mud motor
allows a reduction in drillstring rotary RPM that reduces wear on
the casing and wear and fatigue of the drillstring and rotating
topside components. It also provides more effective control over
deviation and doglegs.
Drilling with a motor can be more fuel efficient because the
hydraulic power required driving the downhole motor and drill bit
may be less than the mechanical power required driving a rotating
drill string with the associated friction losses.

Glossary of Terms
Various manufacturers and users use different names for the
same piece of equipment. This can make it confusing in reviewing
literature discussing the same topics. The following are the
component names used at National Oilwell Varco Downhole Tools.

Bent Sub
is used on the top of a drilling motor assembly to cause
deflection.

Orientable Bent Sub


is a bent sub that can be aligned with the bend in the bent
housing.

Dump Sub
(by-pass valve, dump valve or by-pass sub) is used above
the motor section of a positive displacement motor to allow
the drill string to fill when tripping into the hole, and drain
when tripping out of the hole.

Top Sub

1-2
is a crossover, used instead of a dump sub, that couples the
motor section to the drillstring.

Power Section
(motor section, motor assembly, multistage motor, positive
displacement motor (PDM) drive, or rotor and stator) is the
drive section of the downhole motor that converts hydraulic
energy into mechanical energy to drive the drill bit.

Bent Housing
(bent coupling housing) is a housing enclosing the articulated
driveshaft connected to the stator above and the sealed
bearing assembly below. It creates an angle between the
axis of the drilling motor components above it and the drilling
motor components below it. This angle is what causes the
deflection, or build angle, of the well path. This housing is
most often adjustable.

Articulated Driveshaft
(connecting rod assembly, flex coupling, universal joint, or
coupling assembly) is a shaft with universal joints that
transmits power from the motor section above it to the sealed
bearing assembly below it.

Sealed Bearing Assembly


(output shaft assembly, bearing pack, or bearing assembly)
is the assembly between the bent housing and the bit, which
contains the axial and radial bearings and the output shaft.
National Oilwell Varco Downhole Tools refers to its bearing
assembly as a Sealed Bearing Assembly because the
bearings are sealed in a pressure balanced oil filled chamber,
rather than exposed to drilling mud. Vector series 24 and
24X sealed bearing assemblies utilize a flow restrictor to
balance the oil chamber to bit pressure drop. This flow
restrictor is located at the rotating output shaft. It is normal to
see 3-5% of the total fluid flow exiting the motor at the ouput
shaft. This fluid should not be mistaken as a damaged seal
in the motor.

Bearing Mandrel
(Output shaft or drive shaft) is the rotating shaft at the bottom
of the bearing assembly that drives the bit.

1-3
MOTOR SELECTION
Vector motors are generally supplied in the configuration shown
below. Alternates and options are shown, as applicable:
Dump Sub
Alternate Top Sub or Plugged Dump Sub
Alternate Bent Sub
Alternate Float Sub
Power Section (High, Medium Or Low Speed)
Alternate Oversized Stator
Optional Jetted Rotor
Bent Housing
Alternate Straight Housing
Alternate Fixed Bent Housing
Alternate Adjustable Bent Housing, 4 max.
Articulated Driveshaft
Alternate Flex Shaft
Sealed Bearing Assembly w/Thread Protector for
slick assembly
Alternate Screw-on Stabilizer.
Optional components:
Universal Bottom Hole Orientation Sub (UBHO)

Versatility
The Vector low speed, high torque, multi-lobe (M/L) and
high speed (H/S) motors offer the operator unprecedented
flexibility in the field.
Extended time between service intervals result from the use
of a sealed bearing assembly and articulated driveshaft with
sealed universal joints. This, plus the ability to set the adjustable
bent housing angle, and install or remove screw-on stabilizers onto
the sealed bearing assembly on the rig floor, provide a single
motor design suitable for a full range of applications.
The M/L series motors 2 7/8 and larger, can be supplied
with a field replaceable rotor bypass for high circulating rates.
Refer to Section 13 for Nozzle Selection and Replacement.

2-1
MOTOR COMPONENTS

3-1
Dump Sub

The dump sub allows fluid to bypass the motor section and
fill the bore of the drill string when tripping into the hole. It also
allows the bore of the drill string to drain when tripping out of the
hole. When no dump sub is used, a wet trip out of the hole will
occur.
At low circulation rates, a spring holds a ported piston in the
upper position, exposing ports in the dump sub body which allow
drilling fluid to flow into or out of the drill string while tripping.
When the rig pumps are started, the flow through the piston bore
causes a pressure drop across the ports in the piston. This forces
the piston down, overcoming the spring force and closing the ports
which in turn directs the drilling fluid through the motor. When the
rig pumps are stopped, the spring forces the piston up, opening the
ports.

Vector dump subs are preset to close at less than the
minimum recommended circulation rate of the motor assembly.
There is little pressure loss through the dump sub when operating.

The top connection of a Vector dump sub is an API tool
joint box. The lower connection is a Vector designed thread form
that connects to the box of the stator housing.

Power Section
The drive is a Moineau1 pump operated in reverse. Drilling
fluid pumped through the assembly causes a rotor to turn and
apply rotary motion and torque to the drill bit, through the
articulated driveshaft and the output shaft in the sealed bearing
assembly.
The power section consists of a helical shaped rotor running
inside the stator (an elastomer liner bonded to a steel tube). The
stator elastomer liner opening is dissimilar in shape to the rotor.
The pitch length of the stator cavity is longer than the pitch length
of the rotor. The dissimilarity in the shapes of the rotor and stator
produces wedge shaped cavities that are sealed along their edges.
The pressure that is produced as drilling fluid is pumped through
the motor section causes the rotor to turn and the cavities to move
forward in the direction of fluid flow.

The 1 to 2 lobe configuration, used in Vector high-speed
motors, has a helical shaped rotor with a circular cross section
(1 lobe). The elastomer liner opening of the stator is oblong in
cross section (2 lobes), and is molded in a helical shape with a
pitch length twice that of the rotor pitch length.

1 Moineau - Reference Is Made To The Inventor Of The Progressing Cavity Pump.

3-2
The multi-lobe configuration, employed in Vector low
speed, high torque motors, uses a rotor with a multiple-lobed cross
section that also forms a helix. The elastomer liner in the stator
has a cross section containing one more lobe than the rotor. Its
pitch length is longer than the rotors pitch length by the ratio of the
number of stator lobes divided by the number of rotor lobes.
Example: A 7 to 8 lobe configuration has 7 lobes on the rotor, 8
lobes in the stator; and a helical pitch length of the stator equal to
8 / 7 times the pitch length of the rotor.

The number of stages of a Vector PDM drive is the length
of the stator elastomer liner divided by its pitch length.
Vector PDM drives permit accurate determination of the bit
speed and bit torque on bottom from the rig floor at any time by
referring to the accompanying Motor Specifications and
Performance pages. The output torque is directly proportional to
the pressure drop across it. This is a straight-line relationship and
can be determined from the standpipe pressure gauge. The PDM
drives speed is proportional to the circulation rate.
At a constant circulation rate, the speed drops off slightly as
the torque and pressure increase. This is reflected in the motor
performance charts shown in Section 11. The circulation rate can
be read from the pump stroke counter.
The stator is threaded on both ends with a box that uses a

Vector designed thread. It connects to the dump sub above and
to the bent housing below.
The rotor has a box connection that connects to the upper
universal joint of the articulated driveshaft assembly.

Adjustable Housing
The Vector adjustable housing connects the stator to the
sealed bearing assembly and encloses the articulated driveshaft
assembly. The angle setting is field adjustable to produce a wide
range of build rates.
Operation of the 0 - 3 (degree), or 0 - 4 adjustable housing,
is outlined in Section 12.

Fixed Housing
Fixed, non-adjustable housings are available (special order)
in straight or fixed bend configurations.

3-3
Articulated Driveshaft
The articulated driveshaft assembly converts the eccentric or
processional motion of the rotor into concentric rotation for input to
the sealed bearing assembly. It also accommodates any angle set
on the adjustable bent housing (or fixed bend housing) and carries
the thrust load from the rotor caused by the pressure drop across
it.
The assembly consists of two universal joints connected by
a driveshaft. The upper joint connects to the rotor and the lower
joint connects to the sealed bearing assembly. Both universal
joints are lubricated, sealed, and pressure balanced.

Sealed Bearing Assembly


The sealed bearing assembly transmits the rotation of the
rotor, through the articulated driveshaft assembly, to the drill bit. It
carries the compressive thrust load created by the weight on bit,
and the radial and bending loads developed while directional or
steerable drilling. It also carries the tensile off-bottom thrust load
produced by the pressure drops across the rotor and the drill bit,
as well as any load caused by back reaming.

The Vector radial bearings and thrust bearings are sealed
in an oil chamber balanced to the hydrostatic pressure. The thrust
bearings are high capacity and there is no need to balance
hydraulic thrust load to bit load with the Vector motor. The high
capacity radial bearings readily withstand side loads caused by
drilling with a deflection device or uneven cutting action along the
drill bit periphery.
The lower connection is an API regular bit box.

3-4
Stabilizers
Vector motors are available with a thread on the outside of
the sealed bearing assembly to accept straight or spiral blade
screw-on stabilizers or screw-on offset pads. A protector is
installed over this thread when stabilizers or offset pads are not
being used.
Specify stabilizer / pad OD when ordering.
Stabilizers, thread protectors and offset pads should be
torqued to the values shown below.

Make-up Torque,
Stabilizers, Thread Protectors and Offset Pads

Tool Size lb-ft N.m

1 7/16 N/A N/A


1 11/16 N/A N/A
2 1/8 N/A N/A
2 3/8 N/A N/A
2 7/8 2,000 2 700
3 1/8 N/A N/A
3 3/8 N/A N/A
3 1/2 2,000 2 700
3 3/4 4,200 5 700
4 3/4 / 5 6,000 8 100
6 1/4 10,000 13 550
6 3/4 / 7 12,000 16 250
7 3/4 / 8 20,000 27 000
9 5/8 25,000 33 900
11 1/4 32,000 43 000

3-5
SERVICING
National Oilwell Varco Downhole Tools recommends that its
downhole motors be serviced after every run and be returned to an
authorized National Oilwell Varco Downhole Tools service center.
At a National Oilwell Varco Downhole Tools authorized
service center, the motors are visually inspected, flushed and, if
necessary, run in the test stand before disassembly. Motors are
completely disassembled and all parts cleaned and inspected.
Threaded connections and critical components in the motors are
magnetic particle inspected by operators qualified in accordance
with SNT-TC-1A. Threads and parts are redressed as necessary
and worn parts are replaced. Make-up and breakout of all
threaded connections is performed with an accurate torque
machine (e.g. Griffith Torquemaster or Mini-Torque) to ensure
proper torque is applied to the threaded connection. Following re-
assembly the tool is filled with oil and tested for proper operation.
It may become necessary to remove and replace the dump
sub or top sub in the field (e.g. to replace a rotor jet, if so
equipped). If so, the connection should be torqued to the values
specified below:
Make-up Torque,
Dump Sub (or Top Sub) to Stator

Tool Size lb-ft N.m

1 7/16 300 400


1 11/16 750 1 000
2 1/8 1,250 1 700
2 3/8 1,600 2 200
2 7/8 2,400 3 250
3 1/8 3,800 5 100
3 3/8 4,500 6 100
3 1/2 5,000 6 800
3 3/4 5,300 7 200
4 3/4 10,000 14 000
5 15,000 20 300
6 1/4 25,000 33 900
6 3/4 / 7 28,000 38 000
7 3/4 / 8 42,000 56 900
9 5/8 68,000 92 000
11 1/4 80,000 108 000

4-1
OPERATION
No matter whether the application is a correction run,
directional kick-off, sidetrack extended reach, horizontal well, or a
coring run, careful consideration of all parameters will go a long
way in ensuring the successful execution of the planned task.
Hydraulic requirements, circulating fluid data, R.P.M.
requirements, and formation characteristics must be addressed to

ensure the proper selection of the applicable Vector motor.

Preparation for Running and Rig Site Motor Test


Vector downhole motors are shipped from the service
center with all tool connections made up to the proper torque, and
all components inspected and tested for satisfactory operation.
High torque low speed motors are shipped with the rotor bore
plugged unless otherwise specified. All motors are shipped with a
protector covering the screw-on stabilizer thread unless a screw-
on stabilizer is ordered. When ordered in advance, the screw-on
stabilizer is installed at the service center before shipment.

Although Vector motors are tested prior to shipment, we
recommend the following check:
Set the motor in the slips and install a safety clamp. Remove
the lift sub and make up the kelly. Remove the safety clamp
and slips and lower the motor until the dump sub is below the
drilling nipple, but visible. Start the rig pumps slowly; Fluid
should flow out of the dump sub ports.
Increase the pump rate slowly until the dump sub closes.
Leave the pumps running and make note of the circulation
rate and stand pipe pressure when the dump sub closes.
With the pump running and the dump sub closed, check to
ensure that there is no drill fluid leakage through the ports. It
is advisable to increase the pump speed in two or three
steps, to the maximum circulation rate expected downhole,
and note the circulation rate and standpipe pressure in each
case. Shut down the pump. The dump sub may not open
due to a pressure lock in the short hydraulic test circuit. If
this occurs, bleed off the pressure to permit the dump sub to
open.
Make up the drill bit to the proper torque with a bit breaker
and the rig tong placed on the output shaft directly above the
bit. Do not put rig tongs on the sealed bearing assembly
housings. Inspect the output shaft seal area for any
indication of an oil leak.

5-1
Vector motors are shipped from the service center with the
adjustable housing set at zero degrees. To set the adjustable
housing to a different angle, Refer to Section 12 for Adjustable
Housing Operating Instructions.

Running In
The drill string with a straight Vector motor installed can be
run into the hole normally. When using a bent sub, or a non-zero
angle in the adjustable housing, be careful passing the motor
through the blowout preventors, casing shoes, liner hangers,
ledges, or key seats to ensure that the motor or drill bit does not
hang up. Do not run into bottom, or bottom fill, as it could plug the
bit or damage the motor.

Starting the Motor


Begin circulating off bottom with the bit turning freely.
Perform circulation and pressure tests at the same circulation rates
as the prior surface test, and note the readings. The pressure will
be higher due to the restrictions of the drill string components
added. The off bottom pressures noted may be higher than
calculated. This is caused by bit drag on the side of the hole due
to the bent sub, adjustable housing angle and stabilization.

Drilling
After a short hole-cleaning circulation period, slowly lower the
bit to bottom. When bottom is tagged, the standpipe pressure
gauge will show an immediate increase. Increase the bit weight
slowly to achieve the desired build up rate and/or rate of
penetration. Do not exceed the recommended maximum
differential pressure across the motor.
The off bottom pressure is the total system pressure (read
on the stand pipe gauge), from the standpipe, through the
drillstring, the annulus, and back to the drilling nipple, while
circulating with the bit off bottom (i.e. zero weight on bit).
Periodically recheck the off bottom pressure. The
standpipe pressure will slowly increase after hole cleaning due to
the hydraulic energy required to lift the cuttings.
The torque applied to the bit while on bottom is directly
proportional to the difference between the on bottom and off
bottom pressures (i.e. there are no friction losses through the
rotating drill string). An increase in the weight on bit produces an
increase in torque. As the bit drills off, the weight on bit decreases
and correspondingly the pressure and torque decrease. The
standpipe pressure gauge can therefore be used as a torque
indicator.

5-2
The range of Vector motors permits selection of the correct
motor to provide the optimum combination of bit speed, bit torque,
and circulation rate for maximum rates of penetration. When the
drilling conditions permit, the rotary can be engaged.
Running into bottom can damage thrust bearings, and
excessive overpull on a stuck bit can damage off bottom bearings
in the sealed bearing assembly.

Vector motors are designed for extended intervals of on
bottom drilling. The motors should be serviced after a maximum
of 150 operating hours, under ideal drilling conditions. Drilling
conditions other than ideal, such as excessive bit weight, corrosive
drilling fluids or rotating with high bend settings will reduce this
interval accordingly.

Reactive Torque
The drill bit attached to the mud motor at the bit box turns in a
right hand, or clockwise direction, if viewed from the drill floor.
There is a reactive, counter clockwise (or left-hand) torque
produced as a result of the torque applied to the bit. This anti-
clockwise torque must be considered when establishing tool face
orientation and can be calculated by relating the:
1) difference between off bottom free spinning
pressure; and
2) actual on bottom operating pressure.
A rough, determination of the angle of twist of the drill string
can be performed as follows:
1) Measure and record standpipe pressure on
bottom with the desired bit weight and circulation
rate, and off bottom with the same circulation
rate.
2) From the Motor Specifications and Performance
Sheets ( see Section 11) obtain the torque
corresponding to the difference between the on
bottom and off bottom pressures.
3) The torsional angle can be determined by
multiplying the above torque, the length of drill
pipe in the hole, and the angle factors from the
table below.

3 1/2 - 13.3 lb./ft. Drill Pipe


Imperial: 8 1/2 (degrees) / 100 lb-ft Torque / 1000 ft.
Metric: 19 (degrees) / 100 N.m Torque / 1000 m.

5-3
3 1/2 - 15.5 lb./ft. Drill Pipe
Imperial: 7 1/2 (degrees) / 100 lb-ft Torque / 1000 ft.
Metric: 17 (degrees) / 100 N.m Torque / 1000 m.

4 1/2 - 16.6 lb./ft. Drill Pipe


Imperial: 3 1/3 (degrees) / 100 lb-ft Torque / 1000 ft
Metric: 7 1/2 (degrees) / 100 N.m. Torque / 1000 m.

5 - 19.5 lb./ft. Drill Pipe


Imperial: 2 5/8 (degrees) / 100 lb-ft Torque / 1000 ft.
Metric: 6 (degrees) / 100 N.m Torque / 1000 m.

Directional drillers can get an indication of the reactive torque


by the measurement while drilling (MWD) equipment, and can
adjust and lock the rotary table in order to accommodate the
desired tool face direction.
In most applications the use of measurement while drilling or
steering tools to provide real time surface readout of azimuth,
inclination and tool face is much more reliable than the single shot
method of orienting.

Stalling
If the drill bit is overloaded, the motor will stall. An increase
in standpipe pressure will occur and penetration will cease.
When a stall occurs, the drilling fluid deforms the stator
elastomer liner and flows through the PDM drive without turning
the rotor. Bit stall should be avoided, but when it occurs, it should
be quickly remedied. Excessive circulation through a stalled PDM
drive or repeated stalling will seriously damage the stator
elastomer liner and other components within the motor.
If the bit is picked up off-bottom when in a drilling mode, the
trapped torque within the drill string will be released
uncontrollably, potentially causing damage to down-hole
components or causing connections to back-off. This is especially
true when a stall has occurred.
If a stall condition occurs the following procedure should be
followed as soon as possible:
1) Shut down the rotary table immediately.
2) Release trapped torque slowly using the rotary table
brake.
3) Lift the bit off bottom, and
4) Shut the pumps off, if necessary.

5-4
Over-running the Bit
Rotating the drillstring with any positive displacement motor
in a stalled condition may cause the upper portion of the motor
(and drill string) to over-run the bit. This condition may damage the
stator elastomer liner. High torque, low speed multi-lobe motors
are most susceptible to this type of damage.

Rotary RPM
Rotating the drill string while subjected to bending loads
produces fatigue loading on the motor. These bending loads can
be produced even when using adjustable bend settings that are
within the recommended values (see Maximum Adjustable Bend
Setting for Rotary Drilling in Section 11). Drill string rotary speed
should therefore be limited to 50 RPM to reduce the cyclic loading
on the motor.

Motor Pressure Drop


Exceeding the recommended operating maximum differential
pressure across the motor will reduce the stator life. Circulation
rates exceeding the recommended values also reduce the rotor
and stator life.
To understand the conditions affecting the pressure drop
across positive displacement drilling motors, the following should
be recognized:

The pressure drops across the dump sub, bent


housing, articulated driveshaft, and bearing
mandrel of the sealed bearing assembly is
dependent on the circulation rate only (i.e. torque
has no effect). This pressure drop increases as
the circulation rate increases.

The pressure drop across the rotor and stator


increases linearly as the torque increases,
assuming a constant circulation rate.

The effect of mud weight alters the pressure drop


across the motor at no load. However, it has a
negligible effect on the pressure increase due to
the torque on bottom.

Bit Pressure Drop


Continuous excessive pressure drops across the bit can
cause early seal failure in the sealed bearing assembly. The bit
pressure drop should be limited to 1,500 psi (10,000 kPa) for

continuous drilling. However, Vector motors can be configured
to operate with bit pressure drops in excess of 1,500 psi. Please

5-5
contact National Oilwell Varco Downhole Tools engineering if
these higher pressures are required.

Drilling Fluids
Drilling fluids with a pH below 4 or above 10 can cause
damage to the stator. Circulation through the rotor and stator can
minimize this damage and should therefore be maintained when
operating in drilling fluids close to the limits of this pH range.
Allowing the drilling fluid to stagnate will aggravate the problem.
Pumping acid through a motor can seriously attack the plated
components. The motor should be flushed and serviced as soon
as possible - refer to Rig Site Maintenance.
Drilling fluids containing chlorides can reduce rotor and stator
life due to corrosion, especially at elevated temperatures. Special
attention should be paid to the internal coatings when the chloride
concentration is in excess of 30,000 PPM. Contact National
Oilwell Varco Downhole Tools if chloride concentrations are in
excess of this. The motor should be flushed and serviced as soon
as possible if it has been exposed to chlorides - refer to Rig Site
Maintenance.
Drilling mud with a density of more than 16.7 PPG (2.00 kgf/l)
will cause abnormal erosion of motor internals due to suspended
materials within these muds.
Well-mixed medium to fine lost circulation material can be
used without plugging or motor damage. If coarse lost circulation
material is to be used, a circulating sub should be installed above
the motor assembly to bypass the motor.
A Good Rule Of Thumb Is: No More Than 2 1/2 lbs. (1.13 kg)
per Barrel.
Sand content should be less than 2%. Solid content of more
than 5% will shorten rotor and stator life considerably.
Safe run times may have to be shortened to avoid down-hole
motor failure if the above recommendations are not followed.
Never try to cement through a motor as the motor and bit-jets
shear the cement and the cement will immediately flash set.

Oil Based Drilling Fluids


Vector motors can be successfully used in oil based mud if
the operating temperature is below the aniline point of the oil.
However, oil based fluids will deteriorate the elastomeric stator
liner and consequently it is recommended that the stator be relined
after it has been run in an oil based mud.
The aniline point (i.e. temperature) of an oil is an indication of
its tendency to cause swelling of elastomeric parts (e.g. stator,
seals), and is a measure of the oils aromatic content. The lower

5-6
the aniline point, the greater the swelling tendency. The aniline
point gives a measure of the solvent power of a petroleum product
for aniline, which is related to its solvent power for many materials.
This solubility increases with increasing temperature.
1. Operating a motor in an oil based fluid at temperatures above
the oils aniline point allows the aromatic portion of the oil to
permeate and swell the stator elastomer liner and reduce its
hardness and strength. The swelling increases the
interference between the rotor and stator and results in heat
build-up that leads to rapid destruction of the stator elastomer
liner. Power sections with larger clearances are available to
minimize the effects of swelling.
Elastomeric compounds seem to perform better in mineral
based mud systems than in diesel oil based systems. Low toxicity
oil base systems are easier on elastomers because they contain
fewer aromatics.

H2S (Sour) Service


Vector motors are manufactured from steels with a
hardness in excess of that allowed by the National Association of
Corrosion Engineers (NACE) Specification MR0175. This
hardness is required to achieve the strength necessary for use in
the drillstring, but it renders it susceptible to sulfide stress cracking
(SSC). As a consequence the drilling environment should be
controlled if these tools are to be used in sour environments.
The drilling environment may be controlled using one or
more of the following (Reference NACE MR0175):
1) Maintenance of the drilling fluid hydrostatic head to
minimize formation fluid in-flow.
2) Use of chemical sulfide scavengers.
3) Use of a drilling fluid in which oil is the continuous phase.
NOTE: Low aniline point oil based drilling fluids can
damage stator liner and cause premature failure (Refer
to Drilling Fluids).
The following specifications provide recommendations for
drilling sour wells and for the control of the drilling environment:
1) The American Petroleum Institute (API) Recommended
Practice RP7G Section 9.
2) The National Association of Corrosion Engineers (NACE)
Specification MR0175, " Sulfide Stress Cracking
Resistant Metallic Materials for Oilfield Equipment.
3) Alberta Recommended Practices for Drilling Critical Sour
Wells.

5-7
The time that a motor is exposed to H2S in a typical drilling
application is insufficient for H2S to cause damage to the
elastomers (e.g. stator liner) within the motor.

Down-hole Temperature
An increase in static downhole temperature reduces the
strength of the stator elastomer liner. Consequently, the maximum
pressure drop across the power section, i.e. the full load pressure,
must be reduced to avoid stator elastomer premature deterioration.
As Table 5.1 shows, no reduction in full load pressure is necessary
up to a temperature of 140F (60C). Beyond that temperature,
the full load pressure obtained from the performance curves
(Section 11) must be multiplied by the dp reduction factor shown in
Table 5.1. For instance, if the full load pressure obtained from
section 11 is 600 psi and the static downhole temperature is 200F
(93C), the operating full load pressure is calculated by multiplying
600 psi by a dp reduction factor of .68, yielding 408 psi.
A standard power section can operate safely in static
downhole temperatures up to 225F (107C). A higher static
downhole temperature would require the use of a power section
with larger clearances to avoid premature deterioration. The

Vector motors have been successfully used in temperatures up
to 310F (154 C) with special power sections. Therefore, please
consult National Oilwell Varco should a static downhole
temperature greater than 225F (107C) be anticipated.

Table 5.1 Full load pressure reduction factors for downhole temperature

Plugging Off
The motor may plug off with cuttings entering the drill string
through the filter plugs in the dump sub ports. To prevent this
occurrence the hole should be circulated to achieve bottoms up
before running in the hole with a motor.
This may also occur upon breaking connections when drilling
cement or unconsolidated sands, etc. As the annulus loads up
with cuttings, and the kelly is broken off, U-Tubing occurs, (i.e.
the pressure in the annulus exceeds the pressure in the bore due
to different fluid densities). If this occurs, immediately make the

5-8
kelly back up and re-commence circulation and ensure that the
hole is cleaning properly. In some cases it may be necessary to
blank off the dump sub.

Hydraulic Extension
When using a positive displacement motor, the drill string
stretches when bottom is tagged, increasing the weight on bit. The
sequence is as follows:
1. The motor is running freely off bottom.
2. When the string is lowered and the bit tags
bottom, the torque required to drive the bit causes
an increase in the pressure across the motor.
3. This increase in internal pressure in the drill string
causes the drill pipe to stretch and
correspondingly, increases the weight on bit.
Usually the bit drills off and when the string is again
lowered, the above sequence repeats. However, under certain
circumstances the motor may stall and not drill off, and drilling with
a positive displacement motor becomes virtually impossible. The
hydraulic extension maximizes due to the stall pressure, and
causes the bit to become imbedded. One solution is to change the
drill bit to a less aggressive style to avoid imbedding. An alternate
solution is to use a motor with a higher lobe configuration because
these require less pressure drop across the rotor and stator to
produce the same torque.

Partial Rotor Bypass


Vector low speed motors with bored rotors permit higher
circulating rates than normally recommended as a portion of the
circulating fluid passes through the rotor center rather than the
rotor stator interface. It should be understood that the pressure
drop across the rotor bore bypass is the same as the pressure
drop across the PDM drive section. At a very low circulation rate,
below a practical rate for operation, all circulation could be through
the rotor bore bypass and the rotor and output shaft will not turn
due to the static friction between the rotor and stator elastomer
liner.
At high circulation rates on bottom, operating near the rated
torque of the motor, the resulting pressure drop across the PDM
drive causes a substantial portion of total circulation to be directed
through the rotor bore, keeping the flow through the rotor stator
interface within recommended operating limits.
At high circulation rates off bottom, the pressure drop
across the PDM drive is low. Consequently, the portion of the
circulating fluid passing through the bypass is low, and the motor
speed will exceed its recommended limit. In order to avoid major

5-9
damage, high circulating rates off bottom for the purpose of
checking pressure drop, should be kept to a short duration.
When circulating off bottom, for the purpose of hole
cleaning, the circulation rate should not exceed the maximum
recommended for standard motors without bored rotors.
Refer to Nozzle Selection and Replacement, Section 13,
for details.

Tripping Out of the Hole and Checking the Tool


No special procedures are required for tripping out of the
hole with a drill string containing a Vector motor. The string
automatically drains through the dump sub. There is no
requirement to perform any special checks on the sealed bearing
assembly or bit sub, as the thrust bearings are sealed in an oil
chamber.
Note: It is normal to see a small amount of drilling fluid
draining from the vent plugs and in certain models from the lower
end of the seal bearing assembly, just above the output shaft.
Note: Lighter mud weights will typically drain while tripping
out of hole. A motor that has not drained does not suggest that the
motor is damaged. It is recommended to follow the steps outlined
on page 5-1 to ensure proper motor operation.

Rig Site Maintenance


When drilling fluids containing chlorides have been used, it is
imperative the Vector motor is flushed, ideally with fresh water.
Leaving the motor unserviced causes severe pitting of the plated
surfaces. The following is the recommended minimum flushing
procedure:
1) After the tools are removed above the dump sub,
clean fluid should be poured into the top of the
dump sub and the piston actuated with a hammer
handle several times until it travels freely up and
down. Fluid should be flushed through the dump
sub ports, again actuating the piston until free
travel is obtained.
2) Install the ported lift sub. Lift motor and place in
bit breaker. Secure the motor with a chain tong on
the tool body. While rotating the table slowly
clockwise, for a minimum of 6 turns, add clean
fluid in the top or port provided.
NOTE: This procedure may cause internal
threads to back off if performed too rapidly.

5-10
APPLICATIONS

Deflection Devices
Directional drilling or sidetracking operations traditionally
used a bent sub or kick sub placed above the dump sub. A
disadvantage of the bent sub above the motor is that it places the
bend too far off bottom and the drill string should not be rotated.
Bent housings placed between the drive section and lower
bearing section place the bend closer to the bit, tilting the bit and
bearing housing axis in relation to the motor, minimizing bit wall
drag. Motors containing bent housings can be rotated. The
disadvantage of conventional bent housings is that their angle
cannot be changed in the field.

The Vector adjustable housing has the advantages of
placing the bend close to the bit, and it can be rotated. It is easily
adjustable from straight to 3 degrees in 12 increments (or 2
degrees in 12 increments, or 4 degrees in 18 increments), on the
rig floor. The Vector adjustable housing eliminates the need to
select a bent housing angle before a motor can be assembled and
shipped. Vector motors contain a screw-on stabilizer thread on
the lower sealed bearing assembly to enable the motor to be run
slick with the Vector adjustable housing, or with field installable
stabilization as required.

Steerable Systems
The desired angle is set in the adjustable housing sufficient
to alter hole course with the drill string not rotating and the tool
face oriented. When the drill string is rotated with the motor
operating, the system drills straight ahead. Refer to Section 11
Motor Specification and Performance Sheets for the Maximum
Adjustable Bend Setting For Rotary Drilling.
The broad range of circulation rates, bit speeds, and bit
torques available with Vector steerable downhole motors make
them suitable for use with journal bearing and roller tri-cone bits,
PDC bits and diamond bits.
The measurement while drilling system, software, bit
selection, and operation of the total system is the expertise of
others. National Oilwell Varco Downhole Tools concentrates on
the ongoing development of improved motors and accessories, to
compliment the overall steerable system.

6-1
Performance Drilling
Vector motors have been used successfully with higher
output power sections for straight hole performance drilling.
These power sections have more stages and consequently provide
more uniform torque output since the pressure per stage required
producing a given torque is less. The result is optimum rates of
penetration.

Re-Entry Medium Radius Drilling/Horizontal


Drilling Systems
Wells originally drilled and completed in tight or low porosity
formations often experience fall off or cessation of production and
require extensive workover and recollecting to regain economic
production and fracturing, or re-perforation may not produce the
desired result. An alternative method is to mill a window in the
production casing above the producing formation, set a cement
plug, and kick-off with a special design, medium radius drilling
motor, drilling a new hole into the producing formation some
distance away horizontally.

The 3 3/8 or 3 1/2 Vector motors are specifically designed
for re-entry medium radius drilling inside 5 1/2 production casing.
Usually a new 4 3/4 diameter hole is drilled. An example of a
typical motor assembly is as follows:
1) Fixed Angle, Universal Bottom Hole Orientation
Sub (U.B.H.O.) With Mule Shoe For Orienting
Directional Measurement, Or Survey Tools.
2) 1 / 2 Lobe PDM Drive.
3) Adjustable Housing Or A Fixed Housing
4) Sealed Bearing Assembly

This special Vector assembly permits accurate alignment
of the high side of the housing, bent sub and mule shoe. The
Vector 3 3/8 or 3 1/2 re-entry motor is normally used with 3 1/8
diameter drill collars and 2 3/8 drill pipe. It may be equipped with
deflection pads or stabilizers as required. Rotation of the drill string
is not recommended with a bent sub in the string. Typical wells
contain a build section that brings the well to horizontal in the
producing formation or to a high angle just above the producing
formation. Tripping is required prior to drilling a tangent section.
The adjustable housing is usually adjusted to a lower angle, or a
lower angle bent housing installed. When back on bottom the
drill string is rotated slowly to maintain direction of the tangent
section. If corrections of azimuth or inclination are required, the
tool face can be oriented and corrections made without tripping to
change the bottom hole assembly.

6-2
Short Radius Drilling Systems
The Vector 2 7/8, 3 1/2 and 4 3/4 motors are ideally
suited for short radius drilling. The radius may be as short as; 60
feet (18 m) for the 2 7/8 motor, 70 feet (21 m) for the 3 1/2 motor
and 100 feet (30 m) for the 4 3/4 motor.

For example, the Vector system for short radius drilling
from under the shoe or through a window in 7 inch casing involves
drilling 6 1/8 to 6 1/4 hole with a 4 3/4 Vector short radius
motor. A typical system for the build section could contain the
following:
1) Bit.
2) 4 3/4 Sealed Bearing Assembly with Pad.
3) 4 (Degree) Adjustable Housing Enclosing the
Articulated Driveshaft.
4) Special 4 3/4 Multi-Lobe PDM Drive with Top
Sub and flex collar.
5) Five Joints of 2 7/8 IF, S-135 Drill Pipe, with
Wear Protectors/Stabilizers.
6) Twelve to Twenty 4 3/4 Drill Collars.
7) 3 1/2 IF Drill Pipe to Surface.
The 3 1/2 drill pipe and 4 3/4 drill collars remain in the
vertical section of the hole. The bottom assembly is configured to
give a build rate of 8 to 10 (degrees) per 10 feet (3 m). The 2 7/8
drill pipe can negotiate a 100 feet (30 m) radius without exceeding
60% of its yield strength. The string is not rotated during the build
section. Reactive torque is kept constant until approximately 150
feet (46 m) of hole is drilled. A multi-shot survey is taken to enable
plotting of the course of the hole.
When the build section of the hole is completed, a motor in a
steerable configuration is run to bottom, with additional S-135 drill
pipe run between the 4 3/4 collars and the motor. The string is
rotated after tagging bottom to drill ahead. Orienting the tool face
will correct direction.

Milling
Vector low speed motors provide the high torque and low
bit speeds required for milling and cutting with Tungsten Carbide
dressed mills and cutter blades. This is an alternative to rotating
the drill string, especially in deep deviated holes where milling can
be slow and can cause extensive drill string and casing wear.
Applications include packer milling, drilling cement plugs, casing
cutting and junk milling.

6-3
Coring
Vector multi-lobe series motors are ideally suited to coring
operations. The high torque, low speed characteristics provide
increased penetration rates at lower bit weights achieving better
core recovery rates. Lower drill string and casing wear is
experienced, particularly in high angle holes. As a rule no more
than 30 feet (9 m) of core barrel should be run at a time.

Ratholes, Mouseholes and Spudding


Vector downhole motors have applications for drilling
ratholes, mouseholes, and spudding. The motor is either made up
to the kelly, or made up with two drill collars and a circulating head
above it, to add weight and accomplish the tasks faster. The
reactive torque of the motor is restrained with the rig tongs.

Workover
Vector offers 1 7/16 to 4 3/4 diameter workover motors
for cost-effective use in severe workover applications inside
production tubing strings, for use with coiled tubing units.

6-4
AIR OR TWO-PHASE DRILLING
The Vector multi-lobe motors may be used for drilling with
air or two-phase drilling fluids as the circulating medium.
Two-phase drilling fluids can be defined as follows:
Mist: occurs when the liquid fraction is less than 2.5% at
downhole conditions. In this case the liquid stays as droplets
within the gas.
Foam: occurs when the liquid fraction is between 2.5% and
25% at downhole conditions. Foams are typically specified
as % foam quality. Foam quality is the volume fraction of
the gas (i.e. 75% foam quality is 75% gas and 25% liquid, by
volume).
Aerated mud: occurs when the liquid fraction is greater than
25% at downhole conditions. In this case the gas stays as
bubbles within the liquid.
Since there are large volumes of oxygen present in air
drilling, corrosion of the drillstring can be a concern. Passivating
(oxidizing) inhibitors should be used to minimize this corrosion.

Selection / Setup
The critical issue with using a motor in an air or two-phase
drilling application is minimizing the temperature generated within
the stator elastomer liner. This can be accomplished as follows:

Run stators with larger clearances if temp. dictates.

Use the lowest foam quality possible (i.e. the highest


amount of liquid).

Minimize the RPM

Minimize times with no circulation.


All of the above, in addition to the downhole temperature,
interact to determine the life of the stator. Failure of the stator
elastomer liner is accelerated by internal heat build-up. As the
liner heats up it expands, causing an increase in the interference fit
that in turn causes more friction and further heat build-up. Hard
spots then develop in the liner and eventually chunking occurs.
The problem is further compounded by the poor thermal
conductivity of air compared to a drilling fluid.
There are rotors and stators available that are designed
specifically for air or two-phase drilling. These accommodate high
flow rates and run at lower pressure drops and should be selected
if available. Please contact National Oilwell Varco Downhole Tools
for availability and application of these power sections.

7-1
When air drilling power sections are not available use power
sections that run the slowest at the same flowrate. Ideally, use
high performance power sections (more stages) because the
differential pressure per stage required to produce a given torque
is less. This lower differential pressure will be less damaging to the
stator elastomer liner. Although the motor will produce the same
torque at a given differential pressure when using air, the
maximum obtainable differential pressure will be less due to the
extra slippage that occurs with a gas. Consequently, the
maximum obtainable torque (and stall) will be lower.
A crossover sub should be used above the PDM drive rather
than the dump sub because airflow will not cause the dump sub to
close. Alternatively the dump sub ports can be blanked off.
While drilling with air or two-phase fluid, the fluid density in
the annulus may be higher than in the bore due to the cuttings in
the annulus. When a connection is being made the pressure is
reduced in the bore that can result in cuttings entering the bore.
This can damage the motor or plug the bit. A float valve should
therefore be used when drilling with air or two-phase fluids to
prevent this. A small hole is sometimes drilled in the flapper to
allow pressure to equalize if the drillstring does become plugged
between the float valve and the bit.

Fluid / Lubricant Requirements


A lubricant is required to lubricate the stator elastomer liner.
Soap or gel thoroughly mixed with water and injected at a
minimum rate (in GPM) of 5% by volume at downhole conditions is
adequate for most applications. However, other drilling concerns
may dictate higher flow (i.e. avoiding formation of mud rings).
Example
Given:
Air flow rate required = 2000 scfm
Bit Pressure drop = 100 psi
Hydrostatic pressure = 200 psi
Pressure to turn motor (no load) = 75 psi
Calculated:
Motor exit pressure = 100 + 200 = 300 psi
Pressure at no load = 300 + 75 = 375 psi
Flow at no load conditions
= 14.7/(14.7+375)*2000* 7.48 = 564 gpm
Required minimum lubricant = .05*557 = 28 gpm

7-2
Pressures
The pressure at the outlet of the motor (i.e. the motor exit
pressure) has a pronounced effect on the response of the motor.
The motor exit pressure is the sum of the hydrostatic pressure and
the bit pressure drop. This is the pressure that determines the
volume flow rate through the motor.
As the motor exit pressure increases, the motor becomes
less susceptible to runaway and acts more like a motor running on
liquid only.

Temperature
Typically, standard fit motors can be used except where the
downhole temperature dictates that a stator with larger clearances
is required. Static bottom hole temperature up to 225F (107C) is
considered standard.
The air expands as it exits the rotor stator and then the bit
nozzles. The resulting pressure drop has a cooling effect that can
increase the life of the stator.

Volume Requirements
In a standard air drilling application, the required air flow rate
(in SCFM) for proper motor operation is typically three to four times
the maximum motor liquid flow rate (in GPM). This rule applies for
motor exit pressures up to approximately 300 psi.
As the motor exit pressure increases, the airflow rate
required to achieve the same motor operating speed (rpm) also
increases. This is common in some under-balanced applications.
In these cases the required air flow rate increases. Consult
National Oilwell Varco Downhole Tools engineering in these
cases.
If higher flow rates are desired, the rotor can be fitted with a
nozzle to bypass a portion of the flow. However, the motor
becomes even more sensitive to stall if the rotor bypass is used.

Operation
In general, a motor driven by air, mist or foam should be
started while on bottom. It should not be allowed to run freely
before tagging bottom because this can cause high shock loads as
the bit tags bottom which may damage the motor. Ideally, the
motor should be started with fluid first.
A motor is much more torque sensitive when using air, mists,
or foams, than with liquids and consequently is more susceptible to
stalling.

7-3
When drilling operations are to be stopped, let the motor drill
off as the compressors and boosters are being shut down. Picking
up off bottom prior to equalizing the pressure can permit the air
compressed in the drill string to expand, overspeeding and
possibly damaging the motor. It can also cause the internal
connections to back off.

Drilling with Nitrogen (N2)


Air itself consists of approximately 78% nitrogen. The
density of nitrogen is approximately 3% less than that of air at
standard temperature and pressure. Functionally, the motors will
run the same on nitrogen as air. However, the explosive
decompression, as discussed below, is more severe with nitrogen.
Since nitrogen is an inert gas the nitrile sealing components
within the motor, including the stator, are not affected chemically
by nitrogen. However, any sealing compound will absorb nitrogen
(as well as other gases) to some extent while under pressure. If
the pressure has been applied long enough and the pressure is
released too quickly, the gas does not have sufficient time to be
expelled from the nitrile and explosive decompression can occur,
resulting in blistering. This is typically not a problem with
continuous pressure drops across the motor of 400 psi (3,000 kPa)
and less.
After drilling for extended periods with nitrogen, stator
damage can be expected.
For more detailed recommendations, consult a National
Oilwell Varco Downhole Tools representative.

7-4
FISHING INFORMATION/SAFETY
FEATURES
Vector motors have safety devices in its motors that are
designed to keep the tool together should an internal component
fail. Failure of any downhole tool is always a possibility. Please
contact National Oilwell Varco Downhole Tools if fishing
information is required.

8-1
TROUBLE SHOOTING

Sudden Pressure Increase


This may occur when the motor stalls. To correct, pick up
off bottom, and then return to bottom with less bit weight.
The tool may be plugged internally, or the bit plugged
requiring a trip out of the hole for bit or motor replacement.

No Penetration
This may occur due to a worn bit, requiring a bit trip.
Formation changes may require changes in bit weight and
circulation rates.
The motor may be stalled, which can be detected by a
pressure increase.
The stabilizer may be hanging up on the formation.
The bit may be balled up requiring a different bit for the
formation.
The stator elastomer liner may be damaged requiring a trip
out of the hole and motor replacement.

Slow Pressure Decrease


This may result from a wash out in the string or the dump
sub.
Lost circulation causes a decrease in pressure if there is no
return and may be confirmed by checking the pit level.
A gas kick causes a decrease in pressure and may be
detected by an increase in R.O.P. and confirmed by checking the
pit level.

9-1
MOTOR PERFORMANCE MOTOR PERFORMANCE
SUMMARY - IMPERIAL UNITS SUMMARY - IMPERIAL UNITS
Max Max Torque rev/gal Pressure Max Max Torque rev/gal Pressure
Flow Bit At At At Flow Bit At At At
Motor Motor
Rate Speed Full Load No Load Full Load Rate Speed Full Load No Load Full Load
gpm RPM lb-ft rev/gal psi gpm RPM lb-ft rev/gal psi

1 7/16" 1/2 H/S 3.0 Stage 40 2080 25 52.00 390 3 3/4" 4/5 M/L 3.5 Stage 160 260 790 1.56 460
1 11/16" 5/6 M/L 2.5 Stage 30 440 60 14.67 330 3 3/4" 5/6 M/L 5.0 Stage (OS) 160 230 1100 1.44 650
1 11/16" 5/6 M/L 4.4 Stage 45 500 140 11.11 570 3 3/4" 6/7 M/L 3.0 Stage 200 160 1170 0.80 390
1 11/16" 5/6 M/L 5.0 Stage 45 640 140 14.22 650 3 3/4" 7/8 M/L 2.0 Stage 160 90 1160 0.56 260
2 1/8" 5/6 M/L 3.0 Stage 60 430 170 7.17 390 3 3/4" 7/8 M/L 2.3 Stage 160 140 920 0.88 300
2 1/8" 5/6 M/L 6.0 Stage 50 640 170 12.80 780 3 3/4" 7/8 M/L 2.3 Stage 160 140 920 0.88 300
2 3/8" 1/2 H/S 7.0 Stage 50 1370 95 27.40 910 3 3/4" 7/8 M/L 6.7 Stage 160 280 1260 1.75 870
2 3/8" 2/3 M/L 4.0 Stage 65 890 90 13.75 520 3 3/4" 7/8 M/L 10.1 Stage 210 420 1830 1.98 1310
2 3/8" 4/5 M/L 3.0 Stage 25 270 100 10.72 390 4 3/4" 1/2 H/S 3.0 Stage 200 450 510 2.25 390
2 3/8" 5/6 M/L 2.5 Stage 50 400 110 8.00 330 4 3/4" 1/2 H/S 4.0 Stage 200 620 500 3.10 520
2 3/8" 5/6 M/L 5.2 Stage 50 370 250 7.40 680 4 3/4" 1/2 H/S 6.5 Stage 250 740 850 2.96 850
2 3/8" 7/8 M/L 4.0 Stage 80 435 250 5.38 520 4 3/4" 2/3 M/L 8.0 Stage 265 510 1300 1.98 1040
2 7/8" 1/2 H/S 5.2 Stage 70 790 180 11.29 680 4 3/4" 3/4 M/L 9.9 Stage 250 580 1740 2.30 1290
2 7/8" 1/2 H/S 7.0 Stage 70 1050 180 15.00 910 4 3/4" 4/5 M/L 3.5 Stage 250 270 1210 1.08 460
2 7/8" 3/4 M/L 4.0 Stage 40 365 170 9.17 520 4 3/4" 4/5 M/L 6.0 Stage 250 270 2080 1.08 780
2 7/8" 4/5 M/L 3.0 Stage 70 400 210 5.71 390 4 3/4" 4/5 M/L 6.3 Stage 250 265 2180 1.08 820
2 7/8" 5/6 M/L 3.3 Stage 80 480 190 6.00 430 4 3/4" 5/6 M/L 3.0 Stage 250 290 940 1.12 390
2 7/8" 5/6 M/L 4.7 Stage 125 465 440 3.76 610 4 3/4" 5/6 M/L 3.0 Stage - 4 250 290 940 1.12 390
2 7/8" 5/6 M/L 4.7 Stage - 4 125 465 440 3.76 610 4 3/4" 5/6 M/L 8.3 Stage 300 325 2890 1.09 1080
2 7/8" 5/6 M/L 7.0 Stage 80 460 440 5.75 910 4 3/4" 6/7 M/L 6.0 Stage 350 300 2230 0.87 780
2 7/8" 5/6 M/L 7.0 Stage - 4 80 460 440 5.75 910 4 3/4" 7/8 M/L 2.0 Stage (Air) 250 80 2150 0.32 260
2 7/8" 7/8 M/L 1.5 Stage 120 370 140 3.08 200 4 3/4" 7/8 M/L 2.0 Stage - 4 250 80 940 0.32 260
2 7/8" 7/8 M/L 1.5 Stage - 4 120 370 140 3.08 200 4 3/4" 7/8 M/L 2.2 Stage 250 140 1330 0.56 290
2 7/8" 7/8 M/L 2.0 Stage (Air) 70 145 340 2.05 260 4 3/4" 7/8 M/L 2.2 Stage - 4 250 140 1330 0.56 290
2 7/8" 7/8 M/L 2.0 Stage - 4 70 145 340 2.05 260 4 3/4" 7/8 M/L 3.8 Stage 250 140 2430 0.56 490
2 7/8" 7/8 M/L 2.5 Stage 70 230 260 3.29 330 5" 6/7 M/L 6.0 Stage 350 300 2250 0.86 780
2 7/8" 7/8 M/L 2.5 Stage - 4 70 230 260 3.29 330 5" 6/7 M/L 7.0 Stage 350 300 2620 0.86 910
3 1/8" 5/6 M/L 3.5 Stage 175 390 570 2.24 460 5" 6/7 M/L 8.0 Stage 350 300 3000 0.86 1040
3 1/8" 7/8 M/L 3.0 Stage 140 250 560 1.80 390 6 1/4" 1/2 H/S 4.0 Stage 350 460 1160 1.31 520
3 1/8" 7/8 M/L 4.0 Stage 110 405 340 3.68 520 6 1/4" 4/5 M/L 4.3 Stage 400 270 2370 0.68 560
3 3/8" 1/2 H/S 5.5 Stage 100 650 330 6.50 720 6 1/4" 4/5 M/L 7.5 Stage 400 270 4170 0.68 980
3 3/8" 4/5 M/L 5.0 Stage 110 350 550 3.18 650 6 1/4" 5/6 M/L 5.0 Stage 400 290 2820 0.73 650
3 3/8" 7/8 M/L 3.0 Stage 110 180 610 1.64 390 6 1/4" 5/6 M/L 5.5 Stage 500 230 4170 0.46 715
3 1/2" 4/5 M/L 4.0 Stage 160 430 590 2.69 520 6 1/4" 7/8 M/L 2.8 Stage 400 130 2770 0.34 360
3 1/2" 5/6 M/L 2.0 Stage 160 390 290 2.44 260 6 1/4" 7/8 M/L 2.9 Stage 500 85 5590 0.17 380
3 1/2" 5/6 M/L 2.0 Stage - 4 160 390 290 2.44 260 6 1/4" 7/8 M/L 3.0 Stage 400 160 3120 0.39 390
3 1/2" 5/6 M/L 3.0 Stage 160 380 480 2.38 390 6 1/4" 7/8 M/L 4.8 Stage 400 140 4840 0.35 620
3 1/2" 7/8 M/L 3.8 Stage 130 300 810 2.31 490 6 3/4" 1/2 H/S 3.0 Stage 500 480 990 0.97 390
3 1/2" 7/8 M/L 4.3 Stage 110 200 800 1.85 560 6 3/4" 1/2 H/S 4.0 Stage 500 500 1580 1.00 520
3 3/4" 1/2 H/S 4.4 Stage 140 570 420 4.07 570 6 3/4" 2/3 M/L 7.0 Stage (OS) 600 505 2820 0.85 910
3 3/4" 3/4 M/L 9.0 Stage 150 860 630 5.73 1170 6 3/4" 4/5 M/L 4.8 Stage 600 310 3440 0.52 620
Note: Pressure at full load is the on-bottom minus off-bottom pressure.

10-1 10-2
MOTOR PERFORMANCE MOTOR PERFORMANCE
SUMMARY - IMPERIAL UNITS SUMMARY - METRIC UNITS
Max Max Torque rev/gal Pressure Max Max Torque rev/liter Pressure
Flow Bit At At At Flow Bit At At At
Motor Motor
Rate Speed Full Load No Load Full Load Rate Speed Full load No Load Full Load
gpm RPM lb-ft rev/gal psi lpm RPM N.m rev/l kPa

6 3/4" 4/5 M/L 7.0 Stage 600 300 5160 0.50 910 1 7/16" 1/2 H/S 3.0 Stage 150 2080 30 13.738 2690
6 3/4" 5/6 M/L 5.0 Stage 600 280 4380 0.47 650 1 11/16" 5/6 M/L 2.5 Stage 110 440 80 3.876 2280
6 3/4" 6/7 M/L 5.0 Stage 600 175 5410 0.29 650 1 11/16" 5/6 M/L 4.4 Stage 170 500 190 2.935 3930
6 3/4" 6/7 M/L 6.0 Stage 600 175 6500 0.29 780 1 11/16" 5/6 M/L 5.0 Stage 170 640 190 3.758 4480
6 3/4" 7/8 M/L 2.0 Stage (Air) 600 85 4730 0.14 260 2 1/8" 5/6 M/L 3.0 Stage 230 430 230 1.893 2690
6 3/4" 7/8 M/L 2.9 Stage 500 85 7450 0.17 515 2 1/8" 5/6 M/L 6.0 Stage 190 640 230 3.382 5380
6 3/4" 7/8 M/L 3.0 Stage 600 170 3490 0.28 390 2 3/8" 1/2 H/S 7.0 Stage 190 1370 130 7.239 6270
6 3/4" 7/8 M/L 3.5 Stage 600 90 7830 0.15 460 2 3/8" 2/3 M/L 4.0 Stage 250 890 120 3.633 3590
6 3/4" 7/8 M/L 5.0 Stage 600 170 5950 0.28 650 2 3/8" 4/5 M/L 3.0 Stage 90 270 140 2.832 2690
6 3/4" 7/8 M/L 5.7 Stage 600 140 8010 0.24 740 2 3/8" 5/6 M/L 2.5 Stage 190 400 150 2.114 2280
6 3/4" 7/8 M/L 6.4 Stage 600 185 6340 0.31 830 2 3/8" 5/6 M/L 5.2 Stage 190 370 340 1.955 4690
7" 7/8 M/L 6.0 Stage 600 185 5940 0.31 780 2 3/8" 7/8 M/L 4.0 Stage 300 435 340 1.421 3590
7" 7/8 M/L 7.5 Stage 600 185 7420 0.31 975 2 7/8" 1/2 H/S 5.2 Stage 260 790 240 2.982 4690
7 3/4" (8") 1/2 H/S 4.0 Stage 600 420 2210 0.70 520 2 7/8" 1/2 H/S 7.0 Stage 260 1050 240 3.963 6270
7 3/4" (8") 4/5 M/L 3.6 Stage 900 220 5160 0.26 470 2 7/8" 3/4 M/L 4.0 Stage 150 365 230 2.423 3590
7 3/4" (8") 4/5 M/L 5.3 Stage 900 230 7680 0.26 690 2 7/8" 4/5 M/L 3.0 Stage 260 400 280 1.509 2690
7 3/4" (8") 5/6 M/L 5.0 Stage 900 260 5410 0.29 650 2 7/8" 5/6 M/L 3.3 Stage 300 480 260 1.585 2960
7 3/4" (8") 6/7 M/L 4.0 Stage 900 160 7680 0.17 520 2 7/8" 5/6 M/L 4.7 Stage 470 465 600 0.993 4210
7 3/4" (8") 7/8 M/L 2.0 Stage 1100 85 9040 0.08 260 2 7/8" 5/6 M/L 4.7 Stage - 4 470 465 600 0.993 4210
7 3/4" (8") 7/8 M/L 3.0 Stage 900 150 6220 0.17 390 2 7/8" 5/6 M/L 7.0 Stage 300 460 600 1.519 6270
7 3/4" (8") 7/8 M/L 4.0 Stage 900 140 8660 0.16 520 2 7/8" 5/6 M/L 7.0 Stage - 4 300 460 600 1.519 6270
8" 6/7 M/L 5.0 Stage 900 160 9590 0.17 650 2 7/8" 7/8 M/L 1.5 Stage 450 370 190 0.815 1380
9 5/8" 1/2 H/S 4.0 Stage 900 410 3410 0.46 520 2 7/8" 7/8 M/L 1.5 Stage - 4 450 370 190 0.815 1380
9 5/8" 2/3 M/L 7.5 Stage 1200 600 5490 0.49 975 2 7/8" 7/8 M/L 2.0 Stage (Air) 260 145 460 0.542 1790
9 5/8" 3/4 M/L 4.5 Stage 1200 270 7450 0.23 590 2 7/8" 7/8 M/L 2.0 Stage - 4 260 145 460 0.542 1790
9 5/8" 3/4 M/L 6.0 Stage 1200 260 10170 0.22 780 2 7/8" 7/8 M/L 2.5 Stage 260 230 350 0.868 2280
9 5/8" 5/6 M/L 3.0 Stage 1200 130 9450 0.11 390 2 7/8" 7/8 M/L 2.5 Stage - 4 260 230 350 0.868 2280
9 5/8" 5/6 M/L 4.0 Stage 1200 140 12580 0.12 520 3 1/8" 5/6 M/L 3.5 Stage 660 390 770 0.592 3170
9 5/8" 6/7 M/L 5.0 Stage 1200 150 12040 0.13 650 3 1/8" 7/8 M/L 3.0 Stage 530 250 760 0.476 2690
9 5/8" 6/7 M/L 6.0 Stage 1200 150 14450 0.13 780 3 1/8" 7/8 M/L 4.0 Stage 420 405 460 0.972 3590
9 5/8" 7/8 M/L 5.7 Stage 1200 140 16230 0.12 740 3 3/8" 1/2 H/S 5.5 Stage 380 650 450 1.717 4960
11 1/4" 3/4 M/L 3.6 Stage 1500 180 11330 0.12 470 3 3/8" 4/5 M/L 5.0 Stage 420 350 750 0.841 4480
11 1/4" 5/6 M/L 4.6 Stage 1800 160 19010 0.09 600 3 3/8" 7/8 M/L 3.0 Stage 420 180 830 0.432 2690
11 1/4" 6/7 M/L 3.0 Stage 1200 120 12090 0.10 390 3 1/2" 4/5 M/L 4.0 Stage 610 430 800 0.710 3590
3 1/2" 5/6 M/L 2.0 Stage 610 390 390 0.644 1790
3 1/2" 5/6 M/L 2.0 Stage - 4 610 390 390 0.644 1790
3 1/2" 5/6 M/L 3.0 Stage 610 380 650 0.627 2690
3 1/2" 7/8 M/L 3.8 Stage 490 300 1100 0.610 3380
3 1/2" 7/8 M/L 4.3 Stage 420 200 1080 0.489 3860
3 3/4" 1/2 H/S 4.4 Stage 530 570 570 1.076 3930
3 3/4" 3/4 M/L 9.0 Stage 570 860 850 1.514 8070
Note: Pressure at full load is the on-bottom minus off-bottom pressure.

10-3 10-4
MOTOR PERFORMANCE MOTOR PERFORMANCE
SUMMARY - METRIC UNITS SUMMARY - METRIC UNITS
Max Max Torque rev/liter Pressure Max Max Torque rev/liter Pressure
Flow Bit At At At Flow Bit At At At
Motor Motor
Rate Speed Full load No Load Full Load Rate Speed Full load No Load Full Load
lpm RPM N.m rev/l kPa lpm RPM N.m rev/l kPa

3 3/4" 4/5 M/L 3.5 Stage 610 260 1070 0.412 3170 6 3/4" 4/5 M/L 7.0 Stage 2,270 300 6990 0.132 6270
3 3/4" 5/6 M/L 5.0 Stage (OS) 610 230 1490 0.380 4480 6 3/4" 5/6 M/L 5.0 Stage 2,270 280 5930 0.124 4480
3 3/4" 6/7 M/L 3.0 Stage 760 160 1590 0.211 2690 6 3/4" 6/7 M/L 5.0 Stage 2,270 175 7330 0.077 4480
3 3/4" 7/8 M/L 2.0 Stage 610 90 1570 0.148 1790 6 3/4" 6/7 M/L 6.0 Stage 2,270 175 8810 0.077 5380
3 3/4" 7/8 M/L 2.3 Stage 610 140 1250 0.232 2070 6 3/4" 7/8 M/L 2.0 Stage (Air) 2,270 85 6410 0.037 1790
3 3/4" 7/8 M/L 2.3 Stage 610 140 1250 0.232 2070 6 3/4" 7/8 M/L 2.9 Stage 1890 85 10090 0.045 3550
3 3/4" 7/8 M/L 6.7 Stage 610 280 1710 0.462 6000 6 3/4" 7/8 M/L 3.0 Stage 2270 170 4730 0.074 2690
3 3/4" 7/8 M/L 10.1 Stage 790 420 2480 0.523 9030 6 3/4" 7/8 M/L 3.5 Stage 2270 90 10610 0.040 3170
4 3/4" 1/2 H/S 3.0 Stage 760 450 690 0.594 2690 6 3/4" 7/8 M/L 5.0 Stage 2270 170 8060 0.075 4480
4 3/4" 1/2 H/S 4.0 Stage 760 620 680 0.819 3590 6 3/4" 7/8 M/L 5.7 Stage 2270 140 10850 0.063 5100
4 3/4" 1/2 H/S 6.5 Stage 950 740 1150 0.782 5860 6 3/4" 7/8 M/L 6.4 Stage 2270 185 8590 0.082 5720
4 3/4" 2/3 M/L 8.0 Stage 1,000 510 1760 0.523 7170 7" 7/8 M/L 6.0 Stage 2270 185 8050 0.082 5380
4 3/4" 3/4 M/L 9.9 Stage 950 580 2360 0.608 8890 7" 7/8 M/L 7.5 Stage 2270 185 10050 0.082 6720
4 3/4" 4/5 M/L 3.5 Stage 950 270 1640 0.285 3170 7 3/4" (8") 1/2 H/S 4.0 Stage 2270 420 2990 0.185 3590
4 3/4" 4/5 M/L 6.0 Stage 950 270 2820 0.285 5380 7 3/4" (8") 4/5 M/L 3.6 Stage 3410 220 6990 0.069 3240
4 3/4" 4/5 M/L 6.3 Stage 950 265 2950 0.285 5650 7 3/4" (8") 4/5 M/L 5.3 Stage 3410 230 10410 0.068 4760
4 3/4" 5/6 M/L 3.0 Stage 950 290 1270 0.296 2690 7 3/4" (8") 5/6 M/L 5.0 Stage 3410 260 7330 0.076 4480
4 3/4" 5/6 M/L 3.0 Stage - 4 950 290 1270 0.296 2690 7 3/4" (8") 6/7 M/L 4.0 Stage 3410 160 10410 0.045 3590
4 3/4" 5/6 M/L 8.3 Stage 1140 325 3920 0.288 7450 7 3/4" (8") 7/8 M/L 2.0 Stage 4160 85 12250 0.020 1790
4 3/4" 6/7 M/L 6.0 Stage 1320 300 3020 0.230 5380 7 3/4" (8") 7/8 M/L 3.0 Stage 3410 150 8430 0.044 2690
4 3/4" 7/8 M/L 2.0 Stage (Air) 950 80 2910 0.085 1790 7 3/4" (8") 7/8 M/L 4.0 Stage 3410 140 11730 0.041 3590
4 3/4" 7/8 M/L 2.0 Stage - 4 950 80 1270 0.085 1790 8" 6/7 M/L 5.0 Stage 3410 160 12990 0.045 4480
4 3/4" 7/8 M/L 2.2 Stage 950 140 1800 0.148 2000 9 5/8" 1/2 H/S 4.0 Stage 3410 410 4620 0.120 3590
4 3/4" 7/8 M/L 2.2 Stage - 4 950 140 1800 0.148 2000 9 5/8" 2/3 M/L 7.5 Stage 4540 600 7440 0.129 6720
4 3/4" 7/8 M/L 3.8 Stage 950 140 3290 0.148 3380 9 5/8" 3/4 M/L 4.5 Stage 4540 270 10090 0.061 4070
5" 6/7 M/L 6.0 Stage 1,320 300 3050 0.227 5380 9 5/8" 3/4 M/L 6.0 Stage 4540 260 13780 0.058 5380
5" 6/7 M/L 7.0 Stage 1,320 300 3550 0.227 6270 9 5/8" 5/6 M/L 3.0 Stage 4540 130 12800 0.029 2690
5" 6/7 M/L 8.0 Stage 1,320 300 4070 0.227 7170 9 5/8" 5/6 M/L 4.0 Stage 4540 140 17050 0.032 3590
6 1/4" 1/2 H/S 4.0 Stage 1,320 460 1570 0.347 3590 9 5/8" 6/7 M/L 5.0 Stage 4540 150 16310 0.033 4480
6 1/4" 4/5 M/L 4.3 Stage 1510 270 3210 0.178 3860 9 5/8" 6/7 M/L 6.0 Stage 4540 150 19580 0.034 5380
6 1/4" 4/5 M/L 7.5 Stage 1,510 270 5650 0.178 6760 9 5/8" 7/8 M/L 5.7 Stage 4540 140 21990 0.032 5100
6 1/4" 5/6 M/L 5.0 Stage 1,510 290 3820 0.193 4480 11 1/4" 3/4 M/L 3.6 Stage 5680 180 15350 0.032 3240
6 1/4" 5/6 M/L 5.5 Stage 1,890 230 5650 0.122 4930 11 1/4" 5/6 M/L 4.6 Stage 6810 160 25760 0.024 4140
6 1/4" 7/8 M/L 2.8 Stage 1,510 130 3750 0.090 2480 11 1/4" 6/7 M/L 3.0 Stage 4540 120 16380 0.026 2690
6 1/4" 7/8 M/L 2.9 Stage 1,890 85 7570 0.045 2620 Note: Pressure at full load is the on-bottom minus off-bottom pressure.
6 1/4" 7/8 M/L 3.0 Stage 1,510 160 4230 0.103 2690
6 1/4" 7/8 M/L 4.8 Stage 1,510 140 6560 0.092 4270
6 3/4" 1/2 H/S 3.0 Stage 1,890 480 1340 0.256 2690
6 3/4" 1/2 H/S 4.0 Stage 1,890 500 2140 0.264 3590
6 3/4" 2/3 M/L 7.0 Stage (OS) 2,270 505 3820 0.225 6270
6 3/4" 4/5 M/L 4.8 Stage 2,270 310 4660 0.137 4270

10-5 10-6
AVAILABILITY OF POWER
SECTIONS

Motor Power Section configurations shown represent


currently available models at the time of print.

Availability of some power section configurations


may be subject to change. Please contact your local
National Oilwell Varco Sales Representative for
current availability and further information.

US
Phone: 1 800 248 8665 (24 Hours)

Canada
Phone: 1 877 645 8665 (24 Hours)

International
Please refer to contact details on the Motor Handbook back cover

10-7
MOTOR PERFORMANCE DATA

The following pages contain the specifications and


performance characteristics for Vector motors.
Below is a description of the charts shown on these pages
and comments on their use. As improvements are
continuously being made, these specifications are subject
to change without notice. All performance specifications
are based on water at 68F (20C).

PREDICTED BUILD RATES

This chart shows the predicted build rates, in degrees/100 ft


(degrees/30m), at various adjustable housing bend settings
and two or three common hole sizes.

Three motor configurations are shown.


a) SLICK - motors with no stabilization.
b) SINGLE STABILIZER - Motors with a single stabilizer
on the bearing housing.
Stabilizers are considered 1/8" undergauge.
c) TWO STABILIZERS - Motors with a stabilizer on the
bearing housing as well as above the motor.
Stabilizers are considered 1/8" undergauge.

Many factors (e.g. weight on bit, formation type, BHA, bit


type, etc.) affect the actual build rate achieved. These
build rates should therefore only be used as a guideline.

It should be noted that motors set with high adjustable bend


settings may be difficult or impossible to run into a straight
hole or may produce high side loads on the bit resulting in
difficulty starting the motor.

MAXIMUM ADJUSTABLE BEND SETTING FOR


ROTARY DRILLING

This chart shows the maximum bend setting, in degrees,


for continuous rotation of the drill string at various
hole curvatures.

These maximum bend settings were calculated for a


maximum drill string rotary speed of 50 RPM.

Maximum bend settings were calculated on a static


bending stress fatigue analysis.

Excessive vibration can cause fatigue and failure.


Rotary speed should be decreased as necessary
based on local conditions.

Recommendations for offset pads and other configurations


can be supplied upon request.

MAXIMUM PUMP RATE


The maximum recommended flow rate.
If higher flow rates are required, a bypass nozzle in
the rotor should be considered.

11-1
MOTOR PERFORMANCE DATA MOTOR PERFORMANCE DATA

MAXIMUM WEIGHT ON BIT ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


The maximum continuous weight that can be applied
to the motor. 0 1000 2000 3000 4000 5000
kPa

MAXIMUM PULL TO RE-RUN MOTOR 0 200 400 600 800


psi
The maximum tensile load that can be applied after
which the motor can be run again. 140

120 400 (1510)


PULL TO YIELD MOTOR

SPEED : RPM
The tensile load required to yield the weakest part
of the motor. 100 320 (1210)

PERFORMANCE CURVES 80
240 (910)

The three charts shown on the next page plot four 60


performance curves at different flow rates, with the exception 160 (610)
of the middle chart, which is an average plot. Flow rates are 40
displayed in gpm (lpm for metric).
20
gpm (lpm)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE in
psi (kPa for metric) is shown on the horizontal axis. This is 0
the difference between the actual recorded on-bottom (with 5500
load) and off-bottom (no load) pressures. 7000
5000

FULL LOAD
MOTOR SPEED in RPM is shown on the left axis of the top 4500 6000
chart.
TORQUE : lb-ft

4000

TORQUE : N.m
5000
3500
MOTOR TORQUE in lb-ft is shown on the left axis of the
3000 4000
middle chart (N.m for metric is shown on the right axis of the
middle chart). 2500
3000
2000
MOTOR OUTPUT POWER in HP is shown on the left axis of 1500 2000
the bottom chart (kW for metric is shown on the right axis of
the bottom chart). 1000
1000
500
FULL LOAD is shown on each chart as a solid vertical line, 0 0
but only labelled in the middle chart. This is the maximum
recommended load for continuous service. 90
80 60
The "Total pressure loss through motor with no load" 400 (1510)
OUTPUT POWER : HP

OUTPUT POWER : kW
is shown below the charts. This should be added to the 70
50
on-bottom minus off-bottom pressure to obtain the 60 320 (1210)
approximate pressure drop across the motor under load. 40
50
EXAMPLE 40 240 (910) 30

The example shown in the three charts on the next page 30


20
shows that a motor with an on-bottom minus off-bottom 160 (610)
20
pressure of 300 psi (2,100 kPa) and a flow rate of 240 gpm gpm (lpm) 10
(910 lpm) would be turning at an approximate speed of 80 10
RPM. The corresponding output torque would be 0 0
approximately 1,900 lb-ft (2,600 N.m) and the corresponding
output power would be approximately 28 HP (21 kW). 1. Total pressure loss through motor with no load is
)see table 5.1 for information on operating pressure approximately 220 psi (1520 kPa) @ 500 gpm (1890 lpm).
reduction due to operating temperatures above 140F (60C) 2. Charts show actual data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11-2 11-3
1 7/16" 1/2 H/S 3.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 40 gpm 150 lpm
Revolutions per Unit Volume 52.00 rev/gal 13.738 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 25 lb-ft 34 Nm
Maximum Weight on 4,000 lb 20 kN
Maximum Pull to Re-Run Motor 7,000 lbs 30 kN
Pull to Yield Motor 26,000 lbs 120 kN

C 7.1 ft (2.16 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 1.45 in
(37 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: 1" AMMT AW-ROD
NC12
2200
Common Bottom Connection: 1" AMMT AW-ROD 2000 40 (150)
NC12 1800
34 (130)

SPEED : RPM
Weight: 30 lbs (10 kg) 1600
1400 28 (110)
1200
22 (80)
1000
800
600
400
200 gpm (lpm)
0

40
50
35
30 40

TORQUE : N.m
TORQUE : lb-ft

25
30
20
15 FULL LOAD
20
10
10
5
0 0

8
OUTPUT POWER : HP

OUTPUT POWER : kW
7
40 (150) 5
6
4
5 34 (130)

4 3
28 (110)
3
2
2 22 (80)
1
1
gpm (lpm)
0 0

1.Total pressure loss through motor with no load is


approximately 410 psi (2820 kPa) @ 34 gpm (130 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 4 11- 5
1 11/16'' 5/6 M/L 2.5 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 30 gpm 110 lpm
Revolutions per Unit Volume 14.67 rev/gal 3.876 rev/l
Pressure at Full Load 325 psi 2240 kPa
Torque at Full Load 60 lb-ft 81 Nm
Maximum Weight on Bit 6,000 lbs 30 kN
Maximum Pull to Re-Run Motor 8,200 lbs 40 kN
Pull to Yield Motor 52,000 lbs 230 kN

C 7.8 ft (2.38 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 1.75 in
(44 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: NC12 AW-ROD
1 1/4 REG 1 1/4 AMMT
450
Common Bottom Connection: NC12 AW-ROD 30 (110)
400
1 1/4 REG 1 1/4 AMMT
Weight: 40 lbs (20 kg) 350

SPEED : RPM
23 (90)
300
250
16 (60)
200
150
100 9 (30)

50 gpm (lpm)
0

120
150
100
125
TORQUE : lb-ft

TORQUE : N.m
80
100
60
75
FULL LOAD
40 50

20 25

0 0

6
gpm (lpm)
4
OUTPUT POWER : HP

OUTPUT POWER : kW
5
30 (110)
4 3

3 23 (90)
2
2
16 (60)
1
1
9 (30)
0 0

1. Total pressure loss through motor with no load is


approximately 170 psi (1170 kPa) @ 23 gpm (90 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 6 11- 7
1 11/16'' 5/6 M/L 4.4 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 45 gpm 170 lpm
Revolutions per Unit Volume 11.11 rev/gal 2.935 rev/l
Pressure at Full Load 570 psi 3930 kPa
Torque at Full Load 140 lb-ft 190 Nm
Maximum Weight on Bit 6,000 lbs 30 kN
Maximum Pull to Re-Run Motor 8,200 lbs 40 kN
Pull to Yield Motor 52,000 lbs 230 kN

C 9.7 ft (2.96 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 1.75 in
(44 mm)
0 200 400 600 800 psi
Common Top Connection: NC 12 AW-ROD
1 1/4 REG 1 1/4 AMMT
600
Common Bottom Connection: NC 12 AW-ROD
1 1/4 REG 1 1/4 AMMT 500 45 (170)
Weight: 50 lbs (20 kg)

SPEED : RPM
400 35 (130)

300
25 (90)
200
15 (60)
100
gpm (lpm)
0

200
250
175
225
TORQUE : lb-ft

150 200

TORQUE : N.m
125 175
150
100
125

FULL LOAD
75 100
50 75
50
25 25
0 0

10
gpm (lpm) 7
9
OUTPUT POWER : HP

OUTPUT POWER : kW
8 45 (170) 6
7 5
6 35 (130)
4
5
4 3
25 (90)
3 2
2 15 (60)
1
1
0 0

1. Total pressure loss through motor with no load is


approximately 300 psi (2070 kPa) @ 35 gpm (130 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 8 11- 9
1 11/16'' 5/6 M/L 5.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 45 gpm 170 lpm
Revolutions per Unit Volume 14.22 rev/gal 3.757 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 140 lb-ft 190 Nm
Maximum Weight on Bit 6,000 lbs 30 kN
Maximum Pull to Re-Run Motor 8,200 lbs 40 kN
Pull to Yield Motor 52,000 lbs 230 kN

C 11 ft (3.35 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 1.75 in
(44 mm)
0 200 400 600 800 psi
Common Top Connection: NC 12 AW-ROD
1 1/4 REG 1 1/4 AMMT
700
Common Bottom Connection: NC 12 AW-ROD
600 45 (170)
1 1/4 REG 1 1/4 AMMT
Weight: 60 lbs (30 kg)

SPEED : RPM
500 35 (130)
400
25 (90)
300

200 15 (60)
100 gpm (lpm)
0

180
160
200
140
TORQUE : lb-ft

TORQUE : N.m
120
150
100
80
100

FULL LOAD
60
40 50
20
0 0

8
gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
45 (170) 5
6
4
5
35 (130)
4 3
3
25 (90) 2
2
1
1 15 (60)
0 0

1. Total pressure loss through motor with no load is


approximately 340 psi (2340 kPa) @ 35 gpm (130 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 10 11- 11
2 1/8'' 5/6 M/L 3.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 60 gpm 230 lpm
Revolutions per Unit Volume 7.17 rev/gal 1.894 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 170 lb-ft 230 Nm
Maximum Weight on Bit 13,100 lbs 60 kN
Maximum Pull to Re-Run Motor 18,500 lbs 80 kN
Pull to Yield Motor 73,000 lbs 330 kN

C 7.4 ft (2.26 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 2.13 in
(54 mm)
0 200 400 600 800 psi
Common Top Connection: 1 1/4 REG BW-ROD
1 1/2 AMMT
450
Common Bottom Connection: 1 1/4 REG BW-ROD 60 (230)
400
1 1/2 AMMT
Weight: 60 lbs (30 kg) 350

SPEED : RPM
46 (170)
300
250
32 (120)
200
150
18 (70)
100
50 gpm (lpm)
0

400
500
350

FULL LOAD
300 400

TORQUE : N.m
TORQUE : lb-ft

250
300
200
150 200
100
100
50
0 0

12
gpm (lpm) 8

OUTPUT POWER : kW
OUTPUT POWER : HP

10
7
8 60 (230) 6
5
6
46 (170) 4
4 3
32 (120) 2
2
18 (70) 1
0 0

1.Total pressure loss through motor with no load is


approximately 210 psi (1450 kPa) @ 46 gpm (170 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 12 11- 13
2 1/8'' 5/6 M/L 6.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 50 gpm 190 lpm
Revolutions per Unit Volume 12.80 rev/gal 3.382 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 170 lb-ft 230 Nm
Maximum Weight on Bit 13,100 lbs 60 kN
Maximum Pull to Re-Run Motor 18,500 lbs 80 kN
Pull to Yield Motor 73,000 lbs 330 kN

C 10.4 ft (3.17 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 2.13 in
(54 mm)
0 200 400 600 800 1000 1200 psi
Common Top Connection: 1 1/4 REG BW-ROD
1 1/2 AMMT
700
Common Bottom Connection: 1 1/4 REG BW-ROD 50 (190)
1 1/2 AMMT 600
Weight: 90 lbs (40 kg)

SPEED : RPM
500 40 (150)

400 30 (110)
300
20 (80)
200

100 gpm (lpm)


0

300 400

250 350
300

TORQUE : N.m
TORQUE : lb-ft

200
250
150 200
FULL LOAD
150
100
100
50
50
0 0

20
14
18 gpm (lpm) 50 (190)

OUTPUT POWER : kW
OUTPUT POWER : HP

16 12
14 10
40 (150)
12
8
10
8 30 (110) 6
6 4
4
20 (80) 2
2
0 0

1.Total pressure loss through motor with no load is


approximately 250 psi (1720 kPa) @ 40 gpm (150 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 14 11- 15
2 3/8'' 1/2 H/S 7.0 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 50 gpm 190 lpm
Revolutions per Unit Volume 27.40 rev/gal 7.239 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 95 lb-ft 129 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

C 14.2 ft (4.33 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
1600
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG 1400 50 (190)
Weight: 150 lbs (70 kg) 1200

SPEED : RPM
40 (150)
1000
800 30 (110)
600
20 (80)
400
200 gpm (lpm)
0

180 240
160
200
140

TORQUE : N.m
TORQUE : lb-ft

120 160
100
120
80
FULL LOAD

60 80
40
40
20
0 0

25
18
16
OUTPUT POWER : HP

OUTPUT POWER : kW
50 (190)
20
14
12
15 40 (150)
10

10 8
30 (110)
6
5 4
20 (80)
gpm (lpm) 2
0 0

1.Total pressure loss through motor with no load is


approximately 140 psi (960 kPa) @ 40 gpm (150 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 16 11- 17
2 3/8'' 2/3 M/L 4.0 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 65 gpm 250 lpm
Revolutions per Unit Volume 13.75 rev/gal 3.633 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 90 lb-ft 122 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


C 12.3 ft (3.75 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 200 400 600 800 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
1000
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT
900
1 1/2 REG 65 (250)
800
Weight: 130 lbs (60 kg)
700

SPEED : RPM
50 (190)
600
500
35 (130)
400
300
20 (80)
200
100 gpm (lpm)
0

160
200
140
120

TORQUE : N.m
TORQUE : lb-ft

150
100
80
100
60
FULL LOAD

40 50
20
0 0

20
14
18 gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
16 65 (250) 12
14 10
12
50 (190) 8
10
8 6
35 (130)
6 4
4
2
2 20 (80)
0 0

1.Total pressure loss through motor with no load is


approximately 70 psi (480 kPa) @ 50 gpm (190 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 18 11- 19
2 3/8'' 4/5 M/L 3.0 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 25 gpm 90 lpm
Revolutions per Unit Volume 10.72 rev/gal 2.832 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 100 lb-ft 136 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


C 9.9 ft (3.02 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
300
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG 25 (90)
250
Weight: 100 lbs (50 kg)
20 (80)

SPEED : RPM
200

150 15 (60)

100 10 (40)

50
gpm (lpm)
0

160
200
140
120
TORQUE : lb-ft

TORQUE : N.m
150
100
80
100
60
FULL LOAD

40 50
20
0 0

7
5
OUTPUT POWER : HP

OUTPUT POWER : kW
25 (90) 4
5

4 20 (80) 3

3 15 (60) 2
2
10 (40)
1
1
gpm (lpm)
0 0

1.Total pressure loss through motor with no load is


approximately 80 psi (550 kPa) @ 20 gpm (80 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 20 11- 21
2 3/8'' 5/6 M/L 2.5 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 50 gpm 190 lpm
Revolutions per Unit Volume 8.00 rev/gal 2.114 rev/l
Pressure at Full Load 330 psi 2270 kPa
Torque at Full Load 110 lb-ft 149 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

C 9.4 ft (2.87 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
450
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT
400 50 (190)
1 1/2 REG
Weight: 100 lbs (50 kg) 350

SPEED : RPM
300 40 (150)

250
30 (110)
200
150 20 (80)
100
50 gpm (lpm)
0

225 300
200
250
175

TORQUE : N.m
TORQUE : lb-ft

150 200
125
150
100
FULL LOAD
75 100
50
50
25
0 0

9
8 50 (190) 6

OUTPUT POWER : kW
OUTPUT POWER : HP

7 5
6
40 (150)
4
5
4 3
30 (110)
3
2
2
20 (80) 1
1 gpm (lpm)
0 0

1.Total pressure loss through motor with no load is


approximately 140 psi (960 kPa) @ 40 gpm (150 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 22 11- 23
2 3/8'' 5/6 M/L 5.2 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 50 gpm 190 lpm
Revolutions per Unit Volume 7.40 rev/gal 1.955 rev/l
Pressure at Full Load 680 psi 4690 kPa
Torque at Full Load 250 lb-ft 339 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

C 13.4 ft (4.08 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 200 400 600 800 1000 1200 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
450
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT
400
1 1/2 REG 50 (190)
Weight: 140 lbs (60 kg) 350

SPEED : RPM
300 40 (150)
250
30 (110)
200
150 20 (80)
100
50 gpm (lpm)
0

500
450 600
400
500

TORQUE : N.m
TORQUE : lb-ft

350
300 400
250
300
200 FULL LOAD
150 200
100
100
50
0 0

25
18
gpm (lpm)
16
OUTPUT POWER : HP

OUTPUT POWER : kW
20 50 (190) 14
12
15
40 (150) 10

10 8
30 (110) 6
5 4
20 (80) 2
0 0

1.Total pressure loss through motor with no load is


approximately 180 psi (1240 kPa) @ 40 gpm (150 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 24 11- 25
2 3/8'' 7/8 M/L 4.0 Stage
Specifications based on series 20 motor.
Maximum Pump Rate 80 gpm 300 lpm
Revolutions per Unit Volume 5.38 rev/gal 1.421 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 250 lb-ft 339 Nm
Maximum Weight on Bit 13,500 lbs 60 kN
Maximum Pull to Re-Run Motor 22,000 lbs 100 kN
Pull to Yield Motor 81,000 lbs 360 kN

ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


C 11.4 ft (3.47 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 2.38 in
(60 mm)
0 200 400 600 800 psi
Common Top Connection: 1 1/4 REG 1 1/2 AMMT
1 1/2 REG
450
Common Bottom Connection: 1 1/4 REG 1 1/2 AMMT 80 (300)
400
1 1/2 REG
Weight: 120 lbs (50 kg) 350

SPEED : RPM
300 60 (230)
250
200 40 (150)
150
100 20 (80)
50 gpm (lpm)
0

400
500
350
300 400
TORQUE : lb-ft

TORQUE : N.m
250
300
200

FULL LOAD
150 200
100
100
50
0 0

18
16 gpm (lpm) 12
OUTPUT POWER : HP

OUTPUT POWER : kW
14 80 (300) 10
12
8
10 60 (230)
8 6
6 40 (150) 4
4
2
2 20 (80)
0 0

1. Total pressure loss through motor with no load is


approximately 160 psi (1100 kPa) @ 60 gpm (230 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 26 11- 27
2 7/8'' 1/2 H/S 5.2 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 11.29 rev/gal 2.983 rev/l
Pressure at Full Load 680 psi 4690 kPa
Torque at Full Load 180 lb-ft 244 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 13.1 ft (3.99 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 200 400 600 800 1000 psi
Common Top Connection: 2 3/8 REG
900
Common Bottom Connection: 2 3/8 REG
800 70 (260)
Weight: 200 lbs (90 kg) 700

SPEED : RPM
600 55 (210)
500
40 (150)
400
300
25 (90)
200
100 gpm (lpm)
0

300 400

250 350
300

TORQUE : N.m
TORQUE : lb-ft

200
250
150 200

FULL LOAD
150
100
100
50
50
0 0

25
18
gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
16
20
14
70 (260)
12
15
55 (210) 10

10 8
40 (150)
6
5 25 (90) 4
2
0 0

1.Total pressure loss through motor with no load is


approximately 110 psi (760 kPa) @ 55 gpm (210 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 28 11- 29
2 7/8'' 1/2 H/S 7.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 15.00 rev/gal 3.963 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 180 lb-ft 244 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 13.4 ft (4.08 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 2 3/8 REG
1200
Common Bottom Connection: 2 3/8 REG
70 (260)
1000
Weight: 210 lbs (90 kg)

SPEED : RPM
800 55 (210)

600 40 (150)

400
25 (90)
200
gpm (lpm)
0

300 400

250 350
300

TORQUE : N.m
TORQUE : lb-ft

200
250
150 200

FULL LOAD
150
100
100
50
50
0 0

35
25
gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
30
20
25 70 (260)

20 15
55 (210)
15
10
40 (150)
10
5
5 25 (90)

0 0

1.Total pressure loss through motor with no load is


approximately 140 psi (960 kPa) @ 55 gpm (210 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 30 11- 31
2 7/8'' 3/4 M/L 4.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 40 gpm 150 lpm
Revolutions per Unit Volume 9.17 rev/gal 2.423 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 170 lb-ft 230 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 8.08 ft (2.46 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG
400
Common Bottom Connection: 2 3/8 REG 40 (150)
350
Weight: 120 lbs (60 kg) 300

SPEED : RPM
30 (110)
250
200
20 (80)
150
100 10 (40)
50
gpm (lpm)
0

300 400

250 350
TORQUE : lb-ft

300

TORQUE : N.m
200
250
150 200
150
100 FULL LOAD
100
50
50
0 0

16
OUTPUT POWER : HP

14

OUTPUT POWER : kW
gpm (lpm) 40 (150) 10
12
8
10 30 (110)
8 6
6 20 (80)
4
4
10 (40) 2
2
0 0

1.Total pressure loss through motor with no load is


approximately 80 psi (550 kPa) @ 30 gpm (110 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 32 11- 33
2 7/8'' 4/5 M/L 3.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 5.71 rev/gal 1.509 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 210 lb-ft 285 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 8.4 ft (2.56 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: 2 3/8 REG
450
Common Bottom Connection: 2 3/8 REG
70 (260)
400

Weight: 130 lbs (60 kg) 350

SPEED : RPM
300 55 (210)

250
40 (150)
200
150 25 (90)
100
50 gpm (lpm)
0

350
450
300 400
350

TORQUE : N.m
TORQUE : lb-ft

250
300
200
250
150 200
FULL LOAD
100 150
100
50
50
0 0

14
10
OUTPUT POWER : HP

12 70 (260)

OUTPUT POWER : kW
8
10

8 55 (210) 6

6
4
4 40 (150)
2
2
gpm (lpm) 25 (90)
0 0

1.Total pressure loss through motor with no load is


approximately 100 psi (690 kPa) @ 55 gpm (210 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 34 11- 35
2 7/8'' 5/6 M/L 3.3 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 80 gpm 300 lpm
Revolutions per Unit Volume 6.00 rev/gal 1.585 rev/l
Pressure at Full Load 430 psi 2960 kPa
Torque at Full Load 190 lb-ft 257 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 8 ft (2.44 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 100 200 300 400 500 600 psi
Common Top Connection: 2 3/8 REG
500
Common Bottom Connection: 2 3/8 REG 80 (300)
450
400
Weight: 120 lbs (60 kg)

SPEED : RPM
350 60 (230)
300
250
40 (150)
200
150
20 (80)
100
50
gpm (lpm)
0

300 400

250 350

TORQUE : N.m
300
TORQUE : lb-ft

200
250
150 200

FULL LOAD
150
100
100
50
50
0 0

20
14
18
OUTPUT POWER : HP

OUTPUT POWER : kW
16 12
gpm (lpm)
14 10
12
80 (300) 8
10
8 60 (230) 6
6 4
40 (150)
4
2
2 20 (80)
0 0

1. Total pressure loss through motor with no load is


approximately 130 psi (900 kPa) @ 60 gpm (230 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 36 11- 37
2 7/8'' 5/6 M/L 4.7 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 125 gpm 470 lpm
Revolutions per Unit Volume 3.76 rev/gal 0.993 rev/l
Pressure at Full Load 610 psi 4200 kPa
Torque at Full Load 440 lb-ft 596 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


C 10 ft (3.05 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG
500
Common Bottom Connection: 2 3/8 REG
450 125 (470)
400
Weight: 150 lbs (70 kg) 100 (380)

SPEED : RPM
350
300
75 (280)
250
200
50 (190)
150
100
50 gpm (lpm)
0

600 800

500 700
600

TORQUE : N.m
TORQUE : lb-ft

400
500
300 400

FULL LOAD
300
200
200
100
100
0 0

40
OUTPUT POWER : HP

35
25

OUTPUT POWER : kW
30 125 (470)
20
25
100 (380)
20 15
15 75 (280)
10
10
50 (190)
5
5
gpm (lpm)
0 0

1.Total pressure loss through motor with no load is


approximately 120 psi (830 kPa) @ 100 gpm (380 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 38 11- 39
2 7/8'' 5/6 M/L 4.7 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 125 gpm 470 lpm
Revolutions per Unit Volume 3.76 rev/gal 0.993 rev/l
Pressure at Full Load 610 psi 4200 kPa
Torque at Full Load 440 lb-ft 596 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 116,000 lbs 520 kN
B 2.57 ft (0.78 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 12.91 ft (3.93 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.4 in
(86 mm)
E Radius of Offset Pad: 1.61 in (41 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG
500
Common Bottom Connection: 2 3/8 REG
450 125 (470)
400
Weight: 200 lbs (90 kg) 100 (380)

SPEED : RPM
350
Predicted Build Rates - Degrees/100ft (30m) 300
75 (280)
Bend Slick Single Two 250
Setting Stabilizer Stabilizers 200
50 (190)
Hole Size Hole Size Hole Size 150
Deg 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2
100
0.35 2.7 2.3 2.3 2.5 3.7 4.2 2.7 2.6 2.6
0.69 7.0 5.2 4.4 7.0 7.6 8.1 6.4 5.4 5.5 50 gpm (lpm)
1.04 11.7 6.8 6.7 11.7 11.6 12.1 11.7 10.0 10.0 0
1.37 16.1 8.9 8.8 16.1 15.4 15.9 16.1 14.3 14.3
1.69 20.4 11.9 10.9 20.4 19.1 19.5 20.4 18.4 18.5 600 800
2.00 24.5 15.9 13.2 24.5 22.6 23.0 24.5 22.5 22.5
2.29 28.4 19.7 16.9 28.4 26.0 26.3 28.4 26.0 26.3 500 700
TORQUE : lb-ft

2.57 32.1 23.3 20.5 32.1 29.2 29.5 32.1 29.2 29.5 600

TORQUE : N.m
2.83 35.6 26.7 23.9 35.6 32.2 32.5 35.6 32.2 32.5 400
3.06 38.7 29.7 26.8 38.7 34.8 35.1 38.7 34.8 35.1 500
3.28 41.6 32.5 29.7 41.6 37.3 37.6 41.6 37.3 37.6 300 400
3.46 44.0 34.8 32.0 44.0 39.4 39.6 44.0 39.4 39.6

FULL LOAD
3.63 46.3 37.0 34.2 46.3 41.3 41.5 46.3 41.3 41.5 300
200
3.76 48.0 38.7 35.8 48.0 42.8 43.0 48.0 42.8 43.0
200
3.86 49.3 40.0 37.1 49.3 44.0 44.2 49.3 44.0 44.2
100
3.94 50.4 41.1 38.1 50.4 44.9 45.1 50.4 44.9 45.1 100
3.98 50.9 41.6 38.7 50.9 45.3 45.5 50.9 45.3 45.5
0 0
4.00 51.2 41.8 38.9 51.2 45.6 45.8 51.2 45.6 45.8

Maximum Adjustable Bend Setting 40


For Rotary Drilling - Degrees gpm (lpm)
35
OUTPUT POWER : HP

OUTPUT POWER : kW
Hole Slick Single Two 25
Curvature Stabilizer Stabilizer 30
Hole Size Hole Size Hole Size 125 (470)
20
Deg/100ft 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 25
0.0 2.57 3.63 3.94 2.00 2.83 2.83 1.69 2.57 2.57 100 (380)
5.0 2.29 3.28 3.46 1.69 2.29 2.29 1.37 2.00 2.00 20 15
10.0 2.00 2.83 3.28 1.37 2.00 2.00 1.04 1.69 1.69 15 75 (280)
15.0 1.37 2.57 2.83 1.04 1.69 1.69 0.69 1.37 1.37 10
20.0 1.04 2.29 2.57 0.69 1.04 1.37 0.35 1.04 1.04 10
50 (190)
25.0 0.69 1.69 2.29 0.35 0.69 0.69 0.00 0.35 0.35 5
5
30.0 0.35 1.37 1.69 0.00 0.35 0.35 0.00 0.00 0.00
35.0 0.35 1.04 1.37 0.00 0.00 0 0
40.0 0.69 1.04
45.0 0.35 0.69
50.0 0.00 0.35 1. Total pressure loss through motor with no load is
55.0 0.00 approximately 120 psi (830 kPa) @ 100 gpm (380 lpm).
60.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 40 11- 41
2 7/8'' 5/6 M/L 7.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 80 gpm 300 lpm
Revolutions per Unit Volume 5.75 rev/gal 1.519 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 440 lb-ft 596 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 12.6 ft (3.84 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 2 3/8 REG
500
Common Bottom Connection: 2 3/8 REG
450 80 (300)
400
Weight: 190 lbs (90 kg)

SPEED : RPM
350
60 (230)
300
250
200 40 (150)
150
100 20 (80)
50 gpm (lpm)
0

700
900
600 800

TORQUE : N.m
TORQUE : lb-ft

500 700
600
400
500
300 FULL LOAD 400

200 300
200
100
100
0 0

45
30

OUTPUT POWER : kW
40
OUTPUT POWER : HP

35 gpm (lpm)
25
30
20
25 80 (300)
20 15
60 (230)
15
10
10 40 (150)
5
5 20 (80)
0 0

1. Total pressure loss through motor with no load is


approximately 160 psi (1100 kPa) @ 60 gpm (230 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 42 11- 43
2 7/8'' 5/6 M/L 7.0 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 80 gpm 300 lpm
Revolutions per Unit Volume 5.75 rev/gal 1.519 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 440 lb-ft 596 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 116,000 lbs 520 kN
B 2.57 ft (0.78 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 13.5 ft (4.11 m)
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.4 in
(86 mm)
E Radius of Offset Pad: 1.61 in (41 mm) 0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 2 3/8 REG
500
Common Bottom Connection: 2 3/8 REG
450 80 (300)
400
Weight: 210 lbs (90 kg)

SPEED : RPM
350 60 (230)
300
Bend Slick Single Two 250
40 (150)
Setting Stabilizer Stabilizers 200
Hole Size Hole Size Hole Size 150
Deg 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 20 (80)
100
0.35 2.6 2.2 2.2 2.4 3.6 4.1 2.6 2.6 2.6
0.69 6.8 5.1 4.4 6.8 7.4 7.9 6.2 5.4 5.4 50 gpm (lpm)
1.04 11.4 6.6 6.6 11.4 11.4 11.8 11.4 9.8 9.9 0
1.37 15.8 8.7 8.7 15.8 15.1 15.5 15.8 14.0 14.1
1.69 20.0 11.6 10.7 20.0 18.7 19.1 20.0 18.1 18.1 700
2.00 24.0 15.6 12.9 24.0 22.2 22.6 24.0 22.1 22.1 900
2.29 27.8 19.3 16.6 27.8 25.5 25.8 27.8 25.5 25.8 600 800
2.57 31.5 22.8 20.1 31.5 28.6 29.0 31.5 28.6 29.0
TORQUE : lb-ft

2.83 34.9 26.1 23.4 34.9 31.6 31.9 34.9 31.6 31.9 500 700

TORQUE : N.m
3.06 37.9 29.1 26.3 37.9 34.2 34.4 37.9 34.2 34.4 600
3.28 40.8 31.9 29.1 40.8 36.6 36.9 40.8 36.6 36.9 400
500
3.46 43.1 34.2 31.4 43.1 38.7 38.9 43.1 38.7 38.9
3.63 45.3 36.3 33.5 45.3 40.6 40.8 45.3 40.6 40.8 300 400
3.76 47.0 38.0 35.1 47.0 42.1 42.3 47.0 42.1 42.3
200 FULL LOAD 300
3.86 48.3 39.2 36.4 48.3 43.2 43.4 48.3 43.2 43.4
200
3.94 49.4 40.3 37.4 49.4 44.1 44.3 49.4 44.1 44.3
100
3.98 49.9 40.8 37.9 49.9 44.5 44.7 49.9 44.5 44.7 100
4.00 50.2 41.0 38.2 50.2 44.8 44.9 50.2 44.8 44.9 0 0

Maximum Adjustable Bend Setting 50


For Rotary Drilling - Degrees 45
35
OUTPUT POWER : HP

OUTPUT POWER : kW
Hole Slick Single Two
Curvature Stabilizer Stabilizer 40 gpm (lpm) 30
Hole Size Hole Size Hole Size 35 25
Deg/100ft 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 30
0.0 2.57 3.46 3.86 2.00 2.83 2.83 1.69 2.29 2.29 80 (300) 20
5.0 2.29 3.06 3.46 1.69 2.29 2.29 1.37 2.00 2.00 25
10.0 1.69 2.83 3.06 1.37 2.00 2.00 1.04 1.69 1.69 20 15
60 (230)
15.0 1.37 2.57 2.83 1.04 1.37 1.69 0.69 1.37 1.37 15
20.0 1.04 2.00 2.29 0.69 1.04 1.04 0.35 0.69 0.69 10
10 40 (150)
25.0 0.69 1.69 2.00 0.35 0.69 0.69 0.00 0.35 0.35 5
30.0 0.35 1.37 1.69 0.00 0.35 0.35 0.00 0.00 5 20 (80)
35.0 0.00 1.04 1.37 0.00 0.00 0 0
40.0 0.69 1.04
45.0 0.35 0.69
50.0 0.00 0.35 1. Total pressure loss through motor with no load is
55.0 0.00 approximately 160 psi (1100 kPa) @ 60 gpm (230 lpm).
60.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 44 11- 45
2 7/8'' 7/8 M/L 1.5 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 120 gpm 450 lpm
Revolutions per Unit Volume 3.08 rev/gal 0.814 rev/l
Pressure at Full Load 200 psi 1380 kPa
Torque at Full Load 140 lb-ft 190 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 6.9 ft (2.1 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG
400
Common Bottom Connection: 2 3/8 REG
120 (450)
350
Weight: 100 (380)

SPEED : RPM
110 lbs (50 kg) 300
250 80 (300)
200
60 (230)
150
100
gpm (lpm)
50
0

300 400
350

FULL LOAD
250
TORQUE : lb-ft

300

TORQUE : N.m
200
250
150 200
150
100
100
50
50
0 0

20
14
18
OUTPUT POWER : HP

OUTPUT POWER : kW
16 120 (450) 12
14 10
100 (380)
12
8
10 80 (300)
8 6
60 (230)
6 4
4
gpm (lpm) 2
2
0 0

1. Total pressure loss through motor with no load is


approximately 140 psi (960 kPa) @ 100 gpm (380 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 46 11- 47
2 7/8'' 7/8 M/L 1.5 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 120 gpm 450 lpm
Revolutions per Unit Volume 3.08 rev/gal 0.814 rev/l
Pressure at Full Load 200 psi 1380 kPa
Torque at Full Load 140 lb-ft 190 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 116,000 lbs 520 kN
B 2.6 ft (0.79 m)
C 7.8 ft (2.38 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.4 in
(86 mm)
E Radius of Offset Pad: 1.61 in (41 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG
400
Common Bottom Connection: 2 3/8 REG 120 (450)
350
Weight: 120 lbs (50 kg) 300 100 (380)

SPEED : RPM
250 80 (300)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 200
60 (230)
Setting Stabilizer Stabilizers 150
Hole Size Hole Size Hole Size
Deg 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 100
0.35 4.9 3.5 3.4 4.9 7.7 8.9 4.4 4.4 4.4 gpm (lpm)
50
0.69 11.9 6.8 6.7 11.9 13.1 14.3 9.7 8.7 8.6
1.04 19.2 10.3 10.2 19.2 18.8 19.8 18.5 13.8 13.8 0
1.37 26.0 13.6 13.4 26.0 24.1 25.1 26.0 20.0 20.0
1.69 32.6 19.0 16.5 32.6 29.2 30.2 32.6 26.1 26.1 300 400
2.00 39.0 25.2 20.9 39.0 34.2 35.1 39.0 31.9 31.9
2.29 45.0 30.9 26.6 45.0 38.9 39.7 45.0 37.4 37.4 250 350
2.57 50.8 36.4 32.0 50.8 43.4 44.2 50.8 42.7 42.6
TORQUE : lb-ft

300

TORQUE : N.m
2.83 56.7 41.6 37.1 56.1 47.5 48.3 56.1 47.5 47.5
200
3.06 62.1 46.1 41.6 61.2 51.2 51.9 61.2 51.2 51.9 250
3.28 67.3 50.5 45.9 66.4 54.8 55.4 66.4 54.8 55.4
3.46 71.5 54.0 49.4 70.6 57.7 58.3 70.6 57.7 58.3 150 200
3.63 75.5 57.4 52.7 74.6 57.4 61.0 74.6 60.4 61.0 FULL LOAD
150
3.76 78.5 59.9 55.2 77.7 59.9 63.1 77.7 62.5 63.1 100
3.86 80.9 61.9 57.2 80.0 61.9 64.6 80.0 64.1 64.6 100
3.94 82.8 63.5 58.7 81.9 63.5 65.9 81.9 65.4 65.9 50
3.98 83.7 64.3 59.5 82.9 64.3 66.6 82.9 66.0 66.6 50
4.00 84.2 64.7 59.9 83.3 64.7 66.9 83.3 66.3 66.9 0 0

Maximum Adjustable Bend Setting 20


For Rotary Drilling - Degrees 18
14
OUTPUT POWER : HP

OUTPUT POWER : kW
Hole Slick Single Two
16 120 (450) 12
Curvature Stabilizer Stabilizer
Hole Size Hole Size Hole Size 14 10
Deg/100ft 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2
100 (380)
12
0.0 2.00 3.46 3.86 1.69 2.57 2.57 1.37 2.00 2.00 80 (300) 8
8.5 1.69 3.06 3.46 1.37 2.00 2.00 1.04 1.37 1.37 10
17.0 1.37 2.57 3.06 1.04 1.69 1.69 0.69 1.04 1.04 8 60 (230) 6
25.5 1.04 2.29 2.83 0.69 1.04 1.37 0.35 0.69 0.35 6
34.0 0.69 2.00 2.29 0.35 0.69 0.69 0.00 0.00 0.00 4
4
42.5 0.00 1.69 2.00 0.00 0.35 0.35 gpm (lpm) 2
51.0 1.37 1.69 0.00 2
59.5 1.04 1.37 0 0
68.0 0.69 1.04
76.5 0.35 0.69
85.0 0.00 0.35 1. Total pressure loss through motor with no load is
93.5 0.00 approximately 130 psi (900 kPa) @ 100 gpm (380 lpm).
102.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 48 11- 49
2 7/8'' 7/8 M/L 2.0 Stage (Air)
Specifications based on series 17 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 2.05 rev/gal 0.542 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 340 lb-ft 461 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 8.8 ft (2.68 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG
160
Common Bottom Connection: 2 3/8 REG
140 70 (260)
Weight: 140 lbs (60 kg) 120 60 (230)

SPEED : RPM
100
45 (170)
80
60 30 (110)
40
20
gpm (lpm)
0

600 800

500 700
TORQUE : lb-ft

600

TORQUE : N.m
400
500
300 400

200 FULL LOAD 300


200
100
100
0 0

12
70 (260) 8
OUTPUT POWER : HP

OUTPUT POWER : kW
10
7
60 (230)
8 6
5
6 45 (170)
4
4 3
30 (110)
2
2
gpm (lpm) 1
0 0

1. Total pressure loss through motor with no load is


approximately 50 psi (340 kPa) @ 60 gpm (230 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 50 11- 51
2 7/8'' 7/8 M/L 2.0 Stage (Air)
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 2.05 rev/gal 0.542 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 340 lb-ft 461 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 116,000 lbs 520 kN
B 2.6 ft (0.79 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 10.6 ft (3.23 m)
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.4 in
(86 mm)
0 100 200 300 400 psi
E Radius of Offset Pad: 1.61 in (41 mm)
Common Top Connection: 2 3/8 REG
160
Common Bottom Connection: 2 3/8 REG
140 70 (260)
Weight: 160 lbs (70 kg) 120

SPEED : RPM
60 (230)
100
45 (170)
Bend Slick Single Two 80
Setting Stabilizer Stabilizers 60 30 (110)
Hole Size Hole Size Hole Size
Deg 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 40
0.35 3.3 2.7 2.7 3.2 4.9 5.6 3.2 3.2 3.2
20
0.69 8.5 6.3 5.2 8.5 9.3 10.0 7.5 6.3 6.3 gpm (lpm)
1.04 14.1 8.0 7.9 14.1 13.9 14.6 14.0 11.5 11.5 0
1.37 19.3 10.5 10.4 19.3 18.3 18.9 19.3 16.5 16.5
1.69 24.3 14.2 12.8 24.3 22.5 23.0 24.3 21.3 21.3 600 800
2.00 29.2 18.9 15.7 29.2 26.6 27.1 29.2 26.0 26.0
2.29 33.8 23.4 20.1 33.8 30.4 30.8 33.8 30.4 30.4 500 700
2.57 38.2 27.6 24.3 38.2 34.0 34.5 38.2 34.0 34.5
TORQUE : lb-ft

600

TORQUE : N.m
2.83 42.3 31.6 28.3 42.3 37.5 37.9 42.3 37.5 37.9
400
3.06 45.9 35.1 31.7 45.9 40.5 40.9 45.9 40.5 40.9 500
3.28 49.4 38.4 35.0 49.4 43.4 43.7 49.4 43.4 43.7
3.46 52.2 41.2 37.8 52.2 45.7 46.1 52.2 45.7 46.1 300 400
3.63 55.2 43.8 40.3 54.9 48.0 48.3 54.9 48.0 48.3 FULL LOAD 300
3.76 57.4 45.8 42.3 57.0 49.7 50.0 57.0 49.7 50.0 200
3.86 59.2 47.3 43.8 58.5 51.0 51.3 58.5 51.0 51.3 200
3.94 60.5 48.5 45.0 59.9 52.0 52.3 59.9 52.0 52.3 100
3.98 61.2 49.1 45.6 60.6 52.5 52.8 60.6 52.5 52.8 100
4.00 61.6 49.4 45.9 61.0 52.8 53.1 61.0 52.8 53.1 0 0

Maximum Adjustable Bend Setting 12


For Rotary Drilling - Degrees 8
70 (260)
OUTPUT POWER : HP

Hole Slick Single Two 10

OUTPUT POWER : kW
Curvature Stabilizer Stabilizer 7
Hole Size Hole Size Hole Size 60 (230)
8 6
Deg/100ft 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2
0.0 2.29 3.28 3.76 1.69 2.57 2.57 1.69 2.29 2.29 5
6 45 (170)
6.0 2.00 3.06 3.28 1.37 2.29 2.29 1.37 1.69 1.69 4
12.0 1.69 2.57 3.06 1.04 1.69 2.00 1.04 1.37 1.37
18.0 1.37 2.29 2.57 0.69 1.37 1.37 0.69 1.04 1.04 4 3
30 (110)
24.0 1.04 2.00 2.29 0.35 1.04 1.04 0.35 0.69 0.69 2
30.0 0.69 1.69 2.00 0.00 0.69 0.69 0.00 0.35 0.35 2
36.0 0.35 1.37 1.69 0.35 0.35 gpm (lpm) 1
42.0 1.04 1.37 0.00 0 0
48.0 0.69 1.04
54.0 0.35 0.69
60.0 0.00 0.35 1. Total pressure loss through motor with no load is
66.0 0.00 approximately 50 psi (340 kPa) @ 60 gpm (230 lpm).
72.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 52 11- 53
2 7/8'' 7/8 M/L 2.5 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 3.29 rev/gal 0.869 rev/l
Pressure at Full Load 330 psi 2270 kPa
Torque at Full Load 260 lb-ft 352 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
Pull to Yield Motor 108,000 lbs 490 kN

C 8.2 ft (2.5 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE


0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.06 in
(78 mm)
0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG
250
Common Bottom Connection: 2 3/8 REG 70 (260)
200
Weight: 130 lbs (60 kg)

SPEED : RPM
55 (210)
150
40 (150)
100
25 (90)
50
gpm (lpm)
0

350
450
300 400
TORQUE : lb-ft

250 350

TORQUE : N.m
300
200
250
150 200

FULL LOAD
100 150
100
50
50
0 0

12
gpm (lpm) 8
OUTPUT POWER : HP

OUTPUT POWER : kW
10
7
70 (260)
8 6
55 (210) 5
6
4
4 40 (150) 3
2
2 25 (90)
1
0 0

1. Total pressure loss through motor with no load is


approximately 140 psi (960 kPa) @ 55 gpm (210 lpm).
2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
pressure decreases as per Table 5.1, page 5-8.
11- 54 11- 55
2 7/8'' 7/8 M/L 2.5 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 70 gpm 260 lpm
Revolutions per Unit Volume 3.29 rev/gal 0.869 rev/l
Pressure at Full Load 330 psi 2270 kPa
Torque at Full Load 260 lb-ft 352 Nm
Maximum Weight on Bit 24,100 lbs 110 kN
Maximum Pull to Re-Run Motor 44,600 lbs 200 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 116,000 lbs 520 kN
B 2.6 ft (0.79 m)
C 9.5 ft (2.9 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.4 in
(86 mm)
E Radius of Offset Pad: 1.61 in (41 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG
250
Common Bottom Connection: 2 3/8 REG
70 (260)
200
Weight: 150 lbs (70 kg)

SPEED : RPM
55 (210)
Predicted Build Rates - Degrees/100ft (30m) 150
Bend Slick Single Two 40 (150)
Setting Stabilizer Stabilizers 100
Hole Size Hole Size Hole Size 25 (90)
Deg 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2
50
0.35 4.6 3.3 3.3 4.6 7.1 8.3 4.2 4.2 4.2
0.69 11.3 8.2 6.5 11.3 12.5 13.5 9.3 8.2 8.2 gpm (lpm)
1.04 18.3 9.9 9.8 18.3 17.9 18.9 17.8 13.5 13.5 0
1.37 24.8 13.1 12.9 24.8 23.1 24.0 24.8 19.5 19.5
1.69 31.2 18.2 15.9 31.2 28.1 29.0 31.2 25.4 25.4 350
2.00 37.3 24.1 20.0 37.3 32.9 33.8 37.3 31.0 31.1 450
2.29 43.1 29.6 25.5 43.1 37.5 38.2 43.1 36.4 36.3 300 400
2.57 48.6 34.9 30.7 48.6 41.8 42.6 48.6 41.5 41.5
TORQUE : lb-ft

2.83 54.0 39.9 35.6 53.8 45.9 46.6 53.8 45.9 46.2 250 350

TORQUE : N.m
3.06 59.1 44.2 39.9 58.3 49.5 50.1 58.3 49.5 50.1 300
3.28 64.1 48.4 44.0 63.3 52.9 53.5 63.3 52.9 53.5 200
250
3.46 68.1 51.8 47.4 67.3 55.7 56.3 67.3 55.7 56.3
3.63 71.9 55.1 50.6 71.1 58.4 58.9 71.1 58.4 58.9 150 200

FULL LOAD
3.76 74.8 57.5 53.0 74.0 60.4 60.9 74.0 60.4 60.9 150
3.86 77.1 59.4 54.9 76.3 59.4 62.5 76.3 62.0 62.5 100
100
3.94 78.9 60.9 56.4 78.1 60.9 63.7 78.1 63.2 63.7
50
3.98 79.8 61.7 57.1 79.0 61.7 64.3 79.0 63.8 64.3 50
4.00 80.2 62.1 57.5 79.4 62.1 64.6 79.4 64.2 64.6 0 0

Maximum Adjustable Bend Setting 12


For Rotary Drilling - Degrees gpm (lpm) 8
OUTPUT POWER : HP

Hole Slick Single Two

OUTPUT POWER : kW
10
Curvature Stabilizer Stabilizer 7
Hole Size Hole Size Hole Size 70 (260)
8 6
Deg/100ft 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2 3 1/2 4 1/4 4 1/2
0.0 2.00 3.46 3.86 1.69 2.57 2.57 1.37 2.00 2.00 55 (210) 5
8.0 1.69 3.06 3.46 1.37 2.00 2.00 1.04 1.37 1.37 6
4
16.0 1.37 2.57 3.06 1.04 1.69 1.69 0.69 1.04 1.04
4 40 (150) 3
24.0 1.04 2.29 2.83 0.69 1.04 1.37 0.35 0.69 0.69
32.0 0.69 2.00 2.29 0.35 0.69 0.69 0.00 0.00 0.00 2
40.0 0.00 1.69 2.00 0.00 0.35 0.35 2 25 (90)
48.0 1.37 1.69 0.00 0.00 1
56.0 1.04 1.37 0 0
64.0 0.69 1.04
72.0 0.35 0.69
80.0 0.00 0.35 1. Total pressure loss through motor with no load is
88.0 0.00 approximately 140 psi (960 kPa) @ 55 gpm (210 lpm).
96.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 56 11- 57
3 1/8'' 5/6 M/L 3.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 175 gpm 660 lpm
Revolutions per Unit Volume 2.24 rev/gal 0.592 rev/l
Pressure at Full Load 460 psi 3170 kPa
Torque at Full Load 570 lb-ft 772 Nm
Maximum Weight on Bit 23,500 lbs 110 kN
Maximum Pull to Re-Run Motor 57,000 lbs 260 kN
Pull to Yield Motor 171,000 lbs 770 kN
B 3.86 ft (1.18 m)
C 13.64 ft (4.16 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.13 in
(80 mm)
E Radius of Offset Pad: 1.65 in (42 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 2 3/8 REG
400
Common Bottom Connection: 2 3/8 REG 175 (660)
350
Weight: 250 lbs (110 kg) 300 135 (510)

SPEED : RPM
250
Predicted Build Rates - Degrees/100ft (30m) 105 (400)
Bend Slick 200
Setting 150 75 (280)
Hole Size 100
Deg 4 1/4 4 1/2 4 3/4
50 gpm (lpm)
0.39 2.4 2.4 2.4
0.78 4.8 4.8 4.8 0
1.15 8.0 7.1 7.0
1.50 12.3 10.5 9.1 800
1.83 16.4 14.6 12.8 1000
700
2.12 20.0 18.1 16.3
600 800
TORQUE : lb-ft

2.38 23.2 21.3 19.5

TORQUE : N.m
2.60 25.9 24.0 22.1 500
600
2.77 28.0 26.1 24.2 400
2.89 29.5 27.6 25.6

FULL LOAD
300 400
2.97 30.5 28.5 26.6
3.00 30.9 28.9 27.0 200
200
100
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 60
Hole Size 40

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 1/4 4 1/2 4 3/4 50 gpm (lpm) 35


0.0 3.00 3.00 3.00
40 30
5.0 3.00 3.00 3.00
10.0 2.60 3.00 3.00 175 (660) 25
30
15.0 2.38 2.60 2.89 135 (510) 20
20.0 1.83 2.12 2.38 20 15
105 (400)
25.0 1.50 1.83 2.12
10
30.0 1.15 1.50 1.83 10 75 (280)
35.0 0.78 1.15 1.50 5
40.0 0.39 0.78 0.78 0 0
45.0 0.00 0.39 0.78
50.0 0.00 0.39 1. Total pressure loss through motor with no load is
55.0 0.00 approximately 102 psi (700 kPa) @ 135 gpm (510 lpm).
60.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 58 11- 59
3 1/8'' 7/8 M/L 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 140 gpm 530 lpm
Revolutions per Unit Volume 1.80 rev/gal 0.476 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 560 lb-ft 759 Nm
Maximum Weight on Bit 23,500 lbs 110 kN
Maximum Pull to Re-Run Motor 57,000 lbs 260 kN
Pull to Yield Motor 171,000 lbs 770 kN
B 3.86 ft (1.18 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 14.25 ft (4.34 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.13 in
(80 mm)
0 100 200 300 400 500 600 psi
E Radius of Offset Pad: 1.65 in (42 mm)
Common Top Connection: 2 3/8 REG
300
Common Bottom Connection: 2 3/8 REG
250 140 (530)
Weight: 260 lbs (120 kg)

SPEED : RPM
120 (450)
200
Predicted Build Rates - Degrees/100ft (30m) 100 (380)
Bend Slick 150
80 (300)
Setting
100
Hole Size
Deg 4 1/4 4 1/2 4 3/4 gpm (lpm)
50
0.39 3.1 3.1 3.0
0.78 6.2 6.1 6.1 0
1.15 10.5 9.1 9.0
1.50 16.1 13.7 11.7 1000
1.83 21.3 18.9 16.5 1200
2.12 25.9 23.5 21.1 800

TORQUE : N.m
1000
TORQUE : lb-ft

2.38 30.1 27.5 25.1


2.60 33.6 31.0 28.5 600 800
2.77 36.3 33.7 31.1
2.89 38.2 35.5 33.0 600
FULL LOAD
400
2.97 39.4 36.8 34.2 400
3.00 39.9 37.3 34.7 200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 40
Hole Size 35
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 1/4 4 1/2 4 3/4 140 (530) 25
0.0 3.00 3.00 3.00 30
120 (450) 20
6.5 2.89 3.00 3.00 25
13.0 2.38 2.89 3.00 100 (380)
20 15
19.5 2.12 2.38 2.89
80 (300)
26.0 1.83 2.12 2.38 15
10
32.5 1.50 1.83 2.12 10
39.0 1.15 1.50 1.83 gpm (lpm) 5
5
45.5 0.78 1.15 1.50
52.0 0.39 0.78 1.15 0 0
58.5 0.00 0.39 0.78
65.0 0.00 0.39 1. Total pressure loss through motor with no load is
71.5 0.00 approximately 106 psi (730 kPa) @ 120 gpm (450 lpm).
78.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 60 11- 61
3 1/8'' 7/8 M/L 4.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 110 gpm 420 lpm
Revolutions per Unit Volume 3.68 rev/gal 0.972 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 340 lb-ft 461 Nm
Maximum Weight on Bit 23,500 lbs 110 kN
Maximum Pull to Re-Run Motor 57,000 lbs 260 kN
Pull to Yield Motor 171,000 lbs 770 kN
B 3.86 ft (1.18 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 11.58 ft (3.53 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.13 in
(80 mm)
E Radius of Offset Pad: 1.65 in (42 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG
450
Common Bottom Connection: 2 3/8 REG
400 110 (420)
Weight: 210 lbs (100 kg) 350

SPEED : RPM
300 90 (340)
Predicted Build Rates - Degrees/100ft (30m) 80 (300)
250
Bend Slick 200 70 (260)
Setting gpm (lpm)
150
Hole Size
Deg 4 1/4 4 1/2 4 3/4
100
0.39 2.8 2.7 2.7 50
0.78 5.5 5.5 5.4 0
1.15 9.3 8.1 8.0
1.50 14.2 12.1 10.4 600 800
1.83 18.9 16.8 14.7
500 700
2.12 23.0 20.8 18.7

TORQUE : N.m
600
TORQUE : lb-ft

2.38 26.7 24.5 22.3


400
2.60 29.8 27.5 25.4 500
2.77 32.2 29.9 27.7
300 400
2.89 33.9 31.6 29.4
2.97 35.0 32.7 30.5 FULL LOAD 300
200
3.00 35.4 33.1 30.9 200
100
100
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick
Curvature 35
25
Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

30 110 (420)
Deg/100ft 4 1/4 4 1/2 4 3/4
20
0.0 3.00 3.00 3.00 25
5.5 2.89 3.00 3.00
20 90 (340) 15
11.0 2.60 2.89 3.00
80 (300)
16.5 2.12 2.38 2.89 15
22.0 1.83 2.12 2.38 70 (260) 10
27.5 1.50 1.83 2.12 10
33.0 1.15 1.50 1.83 5
5
38.5 0.78 1.15 1.50 gpm (lpm)
44.0 0.39 0.78 1.15 0 0
49.5 0.00 0.39 0.78
55.0 0.00 0.39 1. Total pressure loss through motor with no load is
60.5 0.00 approximately 120 psi (830 kPa) @ 90 gpm (340 lpm).
66.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 62 11- 63
3 3/8'' 1/2 H/S 5.5 Stage
Specifications based on series 4 motor.
Maximum Pump Rate 100 gpm 380 lpm
Revolutions per Unit Volume 6.50 rev/gal 1.717 rev/l
Pressure at Full Load 720 psi 4960 kPa
Torque at Full Load 330 lb-ft 447 Nm
Maximum Weight on Bit 22,000 lbs 100 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
A 1.3 ft (0.4 m) Pull to Yield Motor 144,000 lbs 650 kN
B 5.2 ft (1.58 m)
C 21.9 ft (6.68 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.38 in
(86 mm)
E Radius of Offset Pad: 1.81 in (46 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
700
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
100 (380)
600
Weight: 470 lbs (210 kg)

SPEED : RPM
500
75 (280)
Predicted Build Rates - Degrees/100ft (30m) 400
Bend Slick Single Two
300 50 (190)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 200
Deg 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 25 (90)
100
0.39 1.6 1.6 1.6 2.4 2.6 2.8 1.8 1.8 1.8 gpm (lpm)
0.78 4.5 3.6 3.2 5.2 5.4 5.6 4.8 4.8 4.8 0
1.15 7.6 6.7 5.8 7.8 8.0 8.2 7.6 7.6 7.6
1.50 10.5 9.6 8.6 10.5 10.4 10.6 10.5 10.3 10.3 600 800
1.83 13.2 12.3 11.3 13.2 12.8 12.9 13.2 12.8 12.8
500 700
2.12 15.6 14.7 13.7 15.6 14.7 15.0 15.6 14.8 15.0
600

TORQUE : N.m
TORQUE : lb-ft

2.38 17.8 16.8 15.9 17.8 16.8 16.8 17.8 16.8 16.8
400
2.60 19.6 18.6 17.7 19.6 18.6 18.3 19.6 18.6 18.3 500
2.77 21.0 20.0 19.1 21.0 20.0 19.5 21.0 20.0 19.5
300 400
2.89 22.0 21.0 20.0 22.0 21.0 20.0 22.0 21.0 20.4
2.97 22.7 21.7 20.7 22.7 21.7 20.7 22.7 21.7 20.9 FULL LOAD 300
200
3.00 22.9 21.9 20.9 22.9 21.9 20.9 22.9 21.9 21.1 200
100
100
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 50
gpm (lpm) 35
Hole Size Hole Size Hole Size 45
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 40 30
100 (380)
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.89 3.00 3.00 35 25
3.5 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.60 2.77 30
7.0 3.00 3.00 3.00 2.12 2.38 2.12 2.12 2.12 1.83 75 (280) 20
25
10.5 2.60 2.89 3.00 1.83 1.83 1.50 1.50 1.83 1.50
20 15
14.0 2.38 2.38 2.60 1.50 1.15 1.15 1.15 0.78 0.78
17.5 1.83 2.12 2.12 0.78 0.78 0.78 0.78 0.39 0.39 15 10
50 (190)
21.0 1.50 1.50 1.83 0.00 0.00 0.00 0.00 0.00 0.00 10
5
24.5 1.15 1.15 1.50 5 25 (90)
28.0 0.78 0.78 1.15 0 0
31.5 0.39 0.39 0.78
35.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 120 psi (830 kPa) @ 75 gpm (280 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 64 11- 65
3 3/8'' 4/5 M/L 5.0 Stage
Specifications based on series 4 motor.
Maximum Pump Rate 110 gpm 420 lpm
Revolutions per Unit Volume 3.18 rev/gal 0.840 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 550 lb-ft 745 Nm
Maximum Weight on Bit 22,000 lbs 100 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
A 1.3 ft (0.4 m) Pull to Yield Motor 144,000 lbs 650 kN
B 5.2 ft (1.58 m)
C 16.9 ft (5.15 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.38 in
(86 mm)
E Radius of Offset Pad: 1.81 in (46 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
400
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
350 110 (420)
Weight: 360 lbs (160 kg) 300

SPEED : RPM
250 85 (320)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 200
60 (230)
Setting Stabilizer Stabilizers 150
Hole Size Hole Size Hole Size 100 35 (130)
Deg 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4
0.39 2.0 2.0 2.3 3.1 3.4 3.7 2.3 2.3 2.3 50 gpm (lpm)
0.78 5.7 4.6 4.0 6.3 6.6 7.0 5.6 5.6 5.7 0
1.15 9.5 8.4 7.2 9.5 9.7 10.0 9.0 9.0 9.0
1.50 13.1 12.0 10.8 13.1 12.6 12.9 13.1 12.2 12.2 1200 1600

FULL LOAD
1.83 16.6 15.3 14.2 16.6 15.3 15.7 16.6 15.2 15.2 1400
1000
2.12 19.5 18.3 17.1 19.5 18.3 18.1 19.5 18.3 17.8

TORQUE : N.m
1200
TORQUE : lb-ft

2.38 22.2 21.0 19.8 22.2 21.0 19.8 22.2 21.0 20.2 800
2.60 24.5 23.2 22.0 24.5 23.2 22.0 24.5 23.2 22.0 1000
2.77 26.3 25.0 23.7 26.5 25.0 23.7 26.5 25.0 23.7 600 800
2.89 27.5 26.2 24.9 27.9 26.2 24.9 27.9 26.2 24.9
600
2.97 28.3 27.0 25.8 28.8 27.0 25.8 28.8 27.0 25.8 400
3.00 28.6 27.3 26.1 29.2 27.3 26.1 29.2 27.3 26.1 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 45
Hole Size Hole Size Hole Size 40 gpm (lpm) 30

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 110 (420)
35 25
0.0 3.00 3.00 3.00 2.60 2.89 3.00 2.38 2.60 2.77
30
4.0 3.00 3.00 3.00 2.12 2.38 2.60 2.12 2.12 2.38
20
8.0 2.60 2.89 3.00 1.83 2.12 1.83 1.83 1.83 1.50 25
85 (320)
12.0 2.12 2.38 2.77 1.50 1.15 1.15 1.15 1.50 1.15 20 15
16.0 1.83 2.12 2.38 1.15 0.78 0.78 0.78 0.78 0.39 15
20.0 1.50 1.83 1.83 0.78 0.39 0.39 0.00 0.00 0.00 60 (230) 10
10
24.0 1.15 1.50 1.50 0.00 0.00 0.00 5
28.0 0.78 1.15 1.15 5 35 (130)
32.0 0.39 0.78 0.78 0 0
36.0 0.00 0.39 0.39
40.0 0.00 0.00 1. Total pressure loss through motor with no load is
44.0 0.00 approximately 150 psi (1030 kPa) @ 85 gpm (320 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 66 11- 67
3 3/8'' 7/8 M/L 3.0 Stage
Specifications based on series 4 motor.
Maximum Pump Rate 110 gpm 420 lpm
Revolutions per Unit Volume 1.64 rev/gal 0.433 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 610 lb-ft 827 Nm
Maximum Weight on Bit 22,000 lbs 100 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
A 1.3 ft (0.4 m) Pull to Yield Motor 144,000 lbs 650 kN
B 5.2 ft (1.58 m)
C 17.5 ft (5.33 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.38 in
(86 mm)
E Radius of Offset Pad: 1.81 in (46 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
180
Common Bottom Connection: 2 3/8 REG 2 7/8 REG 110 (420)
160

Weight: 370 lbs (170 kg) 140 85 (320)

SPEED : RPM
120
Predicted Build Rates - Degrees/100ft (30m) 100
60 (230)
Bend Slick Single Two 80
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size 35 (130)
Deg 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4
40
0.39 2.0 1.9 2.2 2.9 3.3 3.6 2.2 2.2 2.2 20 gpm (lpm)
0.78 5.5 4.4 3.9 6.1 6.4 6.7 5.5 5.5 5.5 0
1.15 9.2 8.1 7.0 9.2 9.4 9.7 8.8 8.8 8.8
1.50 12.7 11.6 10.4 12.7 12.3 12.6 12.7 11.9 11.9 1400
1800
1.83 16.0 14.8 13.7 16.0 14.8 15.2 16.0 14.8 14.8 1200 1600

FULL LOAD
2.12 18.9 17.7 16.6 18.9 17.7 17.6 18.9 17.7 17.4

TORQUE : N.m
1400
TORQUE : lb-ft

2.38 21.5 20.3 19.1 21.5 20.3 19.7 21.5 20.3 19.7 1000
2.60 23.7 22.5 21.3 23.7 22.5 21.3 23.7 22.5 21.4 1200
800
2.77 25.4 24.2 23.0 25.5 24.2 23.0 25.5 24.2 23.0 1000
2.89 26.6 25.4 24.1 26.8 25.4 24.1 26.8 25.4 24.1 600 800
2.97 27.4 26.1 24.9 27.8 26.1 24.9 27.8 26.1 24.9 400 600
3.00 27.7 26.4 25.2 28.1 26.4 25.2 28.1 26.4 25.2 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 30
Hole Size Hole Size Hole Size gpm (lpm)
20
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 4 1/4 4 1/2 4 3/4 25
110 (420)
0.0 3.00 3.00 3.00 2.60 2.89 3.00 2.38 2.60 2.89
20 15
4.0 3.00 3.00 3.00 2.12 2.38 2.12 2.12 2.38 2.38
8.0 2.60 2.89 3.00 1.83 2.12 1.83 1.83 1.83 1.50 85 (320)
15
12.0 2.12 2.38 2.77 1.50 1.15 1.15 1.50 1.50 1.15 10
16.0 1.83 2.12 2.38 1.15 0.78 0.78 1.15 0.78 0.39 10
20.0 1.50 1.83 1.83 0.78 0.39 0.39 0.00 0.00 0.00 60 (230)
5
24.0 1.15 1.50 1.50 0.00 0.00 0.00 5
28.0 0.78 0.78 1.15 35 (130)
32.0 0.39 0.78 0.78 0 0
36.0 0.00 0.39 0.39
40.0 0.00 0.00 1. Total pressure loss through motor with no load is
44.0 approximately 130 psi (900 kPa) @ 85 gpm (320 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 68 11- 69
3 1/2'' 4/5 M/L 4.0 Stage
Specifications based on series 14 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 2.69 rev/gal 0.711 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 590 lb-ft 799 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
Pull to Yield Motor 183,000 lbs 820 kN
B 4.5 ft (1.37 m)
C 15.6 ft (4.75 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 3.5 in
(89 mm)
E Radius of Offset Pad: 1.75 in (44 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
450
Common Bottom Connection: 2 7/8 REG 2 3/8 REG 160 (610)
400

Weight: 360 lbs (160 kg) 350 130 (490)

SPEED : RPM
300
Predicted Build Rates - Degrees/100ft (30m) 250 100 (380)
Bend Slick 200
Setting 70 (260)
150
Hole Size
Deg 4 1/4 4 1/2 4 3/4
100
50 gpm (lpm)
0.39 2.0 2.0 2.0
0.78 4.4 4.1 4.0 0
1.15 8.3 7.0 5.9
1.50 12.0 10.7 9.4 1200 1600
1.83 15.4 14.1 12.8 1400

FULL LOAD
1000
2.12 18.5 17.1 15.8

TORQUE : N.m
1200
TORQUE : lb-ft

2.38 21.2 19.8 18.4 800


2.60 23.5 22.1 20.7 1000
2.77 25.3 23.8 22.5 600 800
2.89 26.5 25.1 23.7
600
2.97 27.3 25.9 24.5 400
3.00 27.7 26.2 24.8 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 70
50
Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

60
Deg/100ft 4 1/4 4 1/2 4 3/4 160 (610)
40
0.0 2.89 3.00 3.00 50
3.5 2.60 2.77 3.00 130 (490)
40 30
7.0 2.12 2.38 2.77
10.5 1.83 2.12 2.38 30 100 (380) 20
14.0 1.50 1.83 2.12
17.5 1.15 1.50 1.83 20
70 (260) 10
21.0 1.15 1.15 1.50
10
24.5 0.78 0.78 1.15 gpm (lpm)
28.0 0.39 0.78 0.78 0 0
31.5 0.00 0.39 0.39
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 230 psi (1580 kPa) @ 130 gpm (490 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 70 11- 71
3 1/2'' 5/6 M/L 2.0 Stage
Specifications based on series 14 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 2.44 rev/gal 0.645 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 290 lb-ft 393 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
Pull to Yield Motor 183,000 lbs 820 kN
B 4.5 ft (1.37 m)
C 11.05 ft (3.37 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.5 in
(89 mm)
E Radius of Offset Pad: 1.75 in (44 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
450
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
400
160 (610)
Weight: 250 lbs (110 kg) 350

SPEED : RPM
300 130 (490)
Predicted Build Rates - Degrees/100ft (30m) 250 100 (380)
Bend Slick 200
Setting
150 70 (260)
Hole Size
Deg 4 1/4 4 1/2 4 3/4
100
0.39 2.9 2.8 2.8 50 gpm (lpm)
0.78 6.2 5.6 5.6 0
1.15 11.6 9.7 8.2
1.50 16.7 14.8 13.0 500
1.83 21.5 19.6 17.7 450 600
2.12 25.7 23.7 21.8 400
TORQUE : lb-ft

TORQUE : N.m
500
2.38 29.5 27.5 25.5 350
2.60 32.7 30.7 28.7 300 400
2.77 35.2 33.1 31.1 250
2.89 36.9 34.8 32.8 300
200 FULL LOAD
2.97 38.1 36.0 34.0 150 200
3.00 38.5 36.4 34.4 100
100
50
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 35
25
Hole Size
OUTPUT POWER : HP

30

OUTPUT POWER : kW
Deg/100ft 4 1/4 4 1/2 4 3/4
20
0.0 2.38 2.77 3.00 25 160 (610)
4.5 2.12 2.38 2.77
20 130 (490) 15
9.0 1.83 2.12 2.38
13.5 1.50 1.83 2.12 15 100 (380) 10
18.0 1.15 1.50 1.83
22.5 1.15 1.15 1.50 10 70 (260)
27.0 0.78 1.15 1.50 5
5
31.5 0.39 0.78 1.15 gpm (lpm)
36.0 0.00 0.39 0.78 0 0
40.5 0.00 0.39 0.39
45.0 0.00 0.39 1. Total pressure loss through motor with no load is
49.5 0.00 approximately 220 psi (1520 kPa) @ 130 gpm (490 lpm).
54.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 72 11- 73
3 1/2'' 5/6 M/L 2.0 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 2.44 rev/gal 0.645 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 290 lb-ft 393 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 143,000 lbs 640 kN
B 2.6 ft (0.79 m)
C 9.05 ft (2.76 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 4.75 in
(121 mm)
E Radius of Offset Pad: 1.81 in (46 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
400
Common Bottom Connection: 2 3/8 REG 2 7/8 REG 160 (610)
350
Weight: 210 lbs (90 kg) 300 130 (490)

SPEED : RPM
250
Predicted Build Rates - Degrees/100ft (30m) 100 (380)
Bend Slick Single Two 200
Setting Stabilizer Stabilizers 70 (260)
150
Hole Size Hole Size Hole Size
Deg 4 3/4 4 3/4 4 3/4 100
0.35 2.9 4.9 3.6
50 gpm (lpm)
0.69 5.8 9.6 7.2
1.04 8.7 14.4 11.8 0
1.37 11.4 19.0 17.1
1.69 14.1 23.4 22.3 500
2.00 19.1 27.7 27.3 450
2.29 24.0 31.7 31.7 600
2.57 28.6 35.5 35.5 400
TORQUE : lb-ft

500

TORQUE : N.m
2.83 32.9 39.1 39.1 350
3.06 36.7 42.3 42.3 300 400
3.28 40.4 45.3 45.3 250
3.46 43.4 47.8 47.8 300
200
3.63 46.2 50.1 50.1 FULL LOAD
3.76 48.4 51.9 51.9 150 200
3.86 50.0 53.3 53.3 100
3.94 51.3 54.4 54.4 100
50
3.98 52.0 55.0 55.0
0 0
4.00 52.3 55.2 55.2

Maximum Adjustable Bend Setting 35


For Rotary Drilling - Degrees 25
OUTPUT POWER : HP

Hole Slick Single Two 30

OUTPUT POWER : kW
Curvature Stabilizer Stabilizer 160 (610) 20
Hole Size Hole Size Hole Size 25
Deg/100ft 4 3/4 4 3/4 4 3/4
20 130 (490) 15
0.0 3.28 2.00 1.37
6.0 3.06 1.69 1.04 100 (380)
15
12.0 2.57 1.04 0.69 10
18.0 2.29 0.69 0.35 10 70 (260)
24.0 2.00 0.35 0.00
30.0 1.69 0.00 5
5
36.0 1.37 gpm (lpm)
42.0 1.04 0 0
48.0 0.69
54.0 0.69
60.0 0.35 1. Total pressure loss through motor with no load is
66.0 0.00 approximately 170 psi (1170 kPa) @ 130 gpm (490 lpm).
72.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 74 11- 75
3 1/2'' 5/6 M/L 3.0 Stage
Specifications based on series 14 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 2.38 rev/gal 0.629 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 480 lb-ft 650 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
Pull to Yield Motor 183,000 lbs 820 kN
B 4.5 ft (1.37 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 12.8 ft (3.9 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.5 in
(89 mm)
E Radius of Offset Pad: 1.75 in (44 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
400
Common Bottom Connection: 2 3/8 REG 2 7/8 REG 160 (610)
350
Weight: 290 lbs (130 kg) 300 130 (490)

SPEED : RPM
250
Predicted Build Rates - Degrees/100ft (30m) 100 (380)
Bend Slick 200
Setting 150 70 (260)
Hole Size 100
Deg 4 1/4 4 1/2 4 3/4 gpm (lpm)
0.39 2.5 2.5 2.5 50
0.78 5.5 5.0 5.0 0
1.15 10.3 8.7 7.3
1.50 14.8 13.2 11.6 800
1.83 19.1 17.4 15.8 1000
700
2.12 22.8 21.1 19.4 900
600

TORQUE : N.m
TORQUE : lb-ft

2.38 26.2 24.5 22.8 800


500 700
2.60 29.1 27.3 25.5
600
2.77 31.3 29.5 27.7 400
500
FULL LOAD
2.89 32.8 31.0 29.2
300 400
2.97 33.9 32.0 30.3
200 300
3.00 34.2 32.4 30.6
200
100 100
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 60
Hole Size 40

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 1/4 4 1/2 4 3/4 50


35
0.0 2.38 2.77 3.00 160 (610)
40 30
4.0 2.12 2.38 2.77
130 (490) 25
8.0 1.83 2.12 2.38
30
12.0 1.50 1.83 2.12 100 (380) 20
16.0 1.50 1.50 1.83 20 15
20.0 1.15 1.50 1.50 70 (260)
10
24.0 0.78 1.15 1.50 10
28.0 0.39 0.78 1.15 gpm (lpm) 5
32.0 0.39 0.39 0.78 0 0
36.0 0.00 0.39 0.39
40.0 0.00 0.39 1. Total pressure loss through motor with no load is
44.0 0.00 approximately 220 psi (1520 kPa) @ 130 gpm (490 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 76 11- 77
3 1/2'' 7/8 M/L 3.8 Stage
Specifications based on series 14 motor.
Maximum Pump Rate 130 gpm 490 lpm
Revolutions per Unit Volume 2.31 rev/gal 0.610 rev/l
Pressure at Full Load 490 psi 3380 kPa
Torque at Full Load 810 lb-ft 1098 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
Pull to Yield Motor 183,000 lbs 820 kN
B 4.5 ft (1.37 m)
C 17.3 ft (5.27 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.5 in
(89 mm)
E Radius of Offset Pad: 1.75 in (44 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG 2 7/8 REG
2 3/8 IF
350
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
300 130 (490)
Weight: 400 lbs (180 kg)

SPEED : RPM
250 110 (420)
Predicted Build Rates - Degrees/100ft (30m) 200 90 (340)
Bend Slick
150 70 (260)
Setting
Hole Size 100
Deg 4 1/4 4 1/2 4 3/4 gpm (lpm)
50
0.39 2.0 1.9 1.9
0.78 4.2 3.9 3.9 0
1.15 8.0 6.7 5.7
1.50 11.5 10.2 9.0 1400
1800
1.83 14.8 13.5 12.2 1200 1600
2.12 17.7 16.4 15.1

TORQUE : N.m
1400
TORQUE : lb-ft

2.38 20.3 19.0 17.7 1000


2.60 22.5 21.2 19.9 1200
800
2.77 24.2 22.9 21.5 1000
2.89 25.4 24.0 22.7 600 800
FULL LOAD
2.97 26.2 24.8 23.5 400 600
3.00 26.5 25.1 23.8 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 45
Hole Size 40 30

OUTPUT POWER : kW
OUTPUT POWER : HP

130 (490)
Deg/100ft 4 1/4 4 1/2 4 3/4
35 25
0.0 3.00 3.00 3.00
30 110 (420)
3.5 2.60 2.89 3.00
20
7.0 2.38 2.60 2.77 25
10.5 1.83 2.12 2.38 20 90 (340) 15
14.0 1.50 1.83 2.12 15
17.5 1.15 1.50 1.83 10
70 (260)
10
21.0 1.15 1.15 1.50 5
24.5 0.78 0.78 1.15 5 gpm (lpm)
28.0 0.39 0.39 0.78 0 0
31.5 0.00 0.39 0.39
35.0 0.00 0.00 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 160 psi (1100 kPa) @ 110 gpm (420 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 78 11- 79
3 1/2'' 7/8 M/L 4.3 Stage
Specifications based on series 14 motor.
Maximum Pump Rate 110 gpm 420 lpm
Revolutions per Unit Volume 1.85 rev/gal 0.489 rev/l
Pressure at Full Load 560 psi 3860 kPa
Torque at Full Load 800 lb-ft 1084 Nm
Maximum Weight on Bit 28,000 lbs 130 kN
Maximum Pull to Re-Run Motor 60,000 lbs 270 kN
Pull to Yield Motor 183,000 lbs 820 kN
B 4.5 ft (1.37 m)
C 17.44 ft (5.32 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.5 in
(89 mm)
0 200 400 600 800 psi
E Radius of Offset Pad: 1.75 in (44 mm)
Common Top Connection: 3 3/8 REG 3 7/8 REG
3 3/8 IF
220
Common Bottom Connection: 3 3/8 REG 3 7/8 REG 200 110 (420)
180
Weight: 400 lbs (180 kg)

SPEED : RPM
160 90 (340)
140
Predicted Build Rates - Degrees/100ft (30m) 120 70 (260)
Bend Slick 100
Setting 50 (190)
80
Hole Size 60
Deg 4 1/4 4 1/2 4 3/4 40
0.39 2.0 2.0 1.9 20 gpm (lpm)
0.78 4.2 3.9 3.9 0
1.15 8.0 6.7 5.7
1.50 11.5 10.2 9.0 1200 1600
1.83 14.8 13.5 12.3 1400
1000
2.12 17.7 16.4 15.1

TORQUE : N.m
TORQUE : lb-ft

1200
2.38 20.3 19.0 17.7 800
2.60 22.5 21.2 19.9 1000
2.77 24.2 22.9 21.6 600 800
2.89 25.4 24.1 22.8
FULL LOAD
600
2.97 26.2 24.9 23.6 400
3.00 26.5 25.2 23.9 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 45
Hole Size 40 30

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 1/4 4 1/2 4 3/4


gpm (lpm)
35 25
0.0 3.00 3.00 3.00
30
3.5 2.60 2.89 3.00
20
7.0 2.38 2.60 2.77 25 110 (420)
10.5 1.83 2.12 2.38 20 90 (340) 15
14.0 1.50 1.83 2.12 15 70 (260) 10
17.5 1.15 1.50 1.83
10 50 (190)
21.0 1.15 1.15 1.50 5
24.5 0.78 0.78 1.15 5
28.0 0.39 0.39 0.78 0 0
31.5 0.00 0.39 0.39
35.0 0.00 0.00 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 80 psi (550 kPa) @ 90 gpm (340 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 80 11- 81
3 3/4'' 1/2 H/S 4.4 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 140 gpm 530 lpm
Revolutions per Unit Volume 4.07 rev/gal 1.075 rev/l
Pressure at Full Load 570 psi 3930 kPa
Torque at Full Load 420 lb-ft 569 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
C 20.4 ft (6.22 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 2 7/8 REG 3 1/2 REG
2 3/8 IF 2 3/8 REG
600
Common Bottom Connection: 2 7/8 REG 3 1/2 REG 140 (530)
2 3/8 REG 500
Weight: 540 lbs (240 kg) 115 (440)

SPEED : RPM
400
Predicted Build Rates - Degrees/100ft (30m) 90 (340)
Bend Slick 300
Setting 65 (250)
200
Hole Size
Deg 4 3/4 5 1/2 5 7/8 gpm (lpm)
100
0.39 2.2 1.6 1.6
0.78 5.4 3.2 3.2 0
1.15 8.5 5.1 4.7
1.50 11.5 8.0 6.3 800
1000

FULL LOAD
1.83 14.3 10.7 9.0 700
2.12 16.7 13.1 11.4
TORQUE : lb-ft

600

TORQUE : N.m
2.38 18.9 15.3 13.5 800
2.60 20.7 17.1 15.3 500
2.77 22.1 18.5 16.7 600
400
2.89 23.1 19.5 17.7
2.97 23.8 20.1 18.4 300 400
3.00 24.1 20.4 18.6 200
200
100
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick
Curvature 45
Hole Size 40 30

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 3/4 5 1/2 5 7/8


35 25
0.0 3.00 3.00 3.00 140 (530)
30
3.5 2.38 3.00 3.00
20
7.0 2.12 2.77 3.00 25 115 (440)
10.5 1.83 2.38 2.60 20 15
14.0 1.15 1.83 2.38 15 90 (340)
17.5 0.78 1.50 1.83 10
10
21.0 0.39 1.15 1.50 65 (250) 5
24.5 0.00 0.78 1.15 5 gpm (lpm)
28.0 0.39 0.78 0 0
31.5 0.00 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 110 psi (760 kPa) @ 115 gpm (440 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 82 11- 83
3 3/4'' 3/4 M/L 9.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 150 gpm 570 lpm
Revolutions per Unit Volume 5.73 rev/gal 1.514 rev/l
Pressure at Full Load 1,170 psi 8060 kPa
Torque at Full Load 630 lb-ft 854 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 18 ft (5.49 m)
kPa
0 2000 4000 6000 8000
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 2 7/8 REG 3 1/2 REG
2 3/8 IF 2 3/8 REG
900
Common Bottom Connection: 2 7/8 REG 3 1/2 REG 150 (570)
800
2 3/8 REG
700 125 (470)
Weight: 470 lbs (210 kg)

SPEED : RPM
600
100 (380)
Predicted Build Rates - Degrees/100ft (30m) 500
Bend Slick 400 75 (280)
Setting
300
Hole Size
Deg 4 3/4 5 1/2 5 7/8
200
0.39 2.6 2.2 1.8 100 gpm (lpm)
0.78 6.5 3.7 3.7 0
1.15 10.1 6.1 5.4
1.50 13.5 9.4 7.5 800
1.83 16.7 12.6 10.6 1000
700
2.12 19.5 15.3 13.3

TORQUE : N.m
600 800
TORQUE : lb-ft

2.38 22.1 17.8 15.8


2.60 24.2 19.9 17.9 500
2.77 25.8 21.5 19.5 600

FULL LOAD
400
2.89 27.0 22.7 20.6
2.97 27.8 23.4 21.3 300 400
3.00 28.1 23.7 21.6 200
200
100
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick
Curvature 120
Hole Size 80

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 4 3/4 5 1/2 5 7/8 100


70
0.0 2.60 3.00 3.00
80 150 (570) 60
3.5 2.12 3.00 3.00
7.0 1.83 2.60 3.00 125 (470) 50
60
10.5 1.50 2.38 2.60 40
100 (380)
14.0 1.15 1.83 2.38 40 30
17.5 0.78 1.50 1.83 75 (280)
20
21.0 0.39 1.15 1.50 20
24.5 0.39 0.78 1.15 gpm (lpm) 10
28.0 0.00 0.78 0.78 0 0
31.5 0.39 0.78
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 260 psi (1790 kPa) @ 125 gpm (470 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 84 11- 85
3 3/4'' 4/5 M/L 3.5 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 1.56 rev/gal 0.412 rev/l
Pressure at Full Load 460 psi 3170 kPa
Torque at Full Load 790 lb-ft 1070 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
C 17.5 ft (5.33 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
300
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
3 1/2 REG 250 160 (610)
Weight: 460 lbs (210 kg)

SPEED : RPM
200 130 (490)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick 150 100 (380)
Setting
100 70 (260)
Hole Size
Deg 4 3/4 5 1/2 5 7/8 50
0.39 2.7 2.2 1.9 gpm (lpm)
0.78 6.6 3.8 3.8 0
1.15 10.3 6.2 5.6
1.50 13.8 9.7 7.7 1400
1800
1.83 17.1 12.9 10.9 1200 1600
2.12 20.0 15.7 13.7
TORQUE : lb-ft

1400

TORQUE : N.m
2.38 22.6 18.3 16.2 1000
2.60 24.8 20.4 18.3 1200
800
2.77 26.5 22.1 20.0 1000
2.89 27.7 23.2 21.1 600 800
2.97 28.5 24.0 21.9 FULL LOAD 600
400
3.00 28.8 24.3 22.2 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 40
Hole Size 35
OUTPUT POWER : HP

160 (610)

OUTPUT POWER : kW
Deg/100ft 4 3/4 5 1/2 5 7/8 25
0.0 2.60 3.00 3.00 30
20
3.5 2.12 3.00 3.00 25 130 (490)
7.0 1.83 2.60 3.00
20 15
10.5 1.50 2.12 2.60
14.0 1.15 1.83 2.38 15 100 (380) 10
17.5 0.78 1.50 1.83 10
21.0 0.39 1.15 1.50 5
5 70 (260)
24.5 0.39 0.78 1.15 gpm (lpm)
28.0 0.00 0.78 1.15 0 0
31.5 0.39 0.78
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 170 psi (1170 kPa) @ 160 gpm (610 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 86 11- 87
3 3/4'' 5/6 M/L 5.0 Stage (OS)
Specifications based on series 24 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 1.44 rev/gal 0.380 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 1,100 lb-ft 1491 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 20.8 ft (6.34 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
250
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
160 (610)
3 1/2 REG
200
Weight: 550 lbs (250 kg)

SPEED : RPM
130 (490)

Predicted Build Rates - Degrees/100ft (30m) 150


100 (380)
Bend Slick
Setting 100
70 (260)
Hole Size
Deg 4 3/4 5 1/2 5 7/8 50
0.39 2.2 1.6 1.6 gpm (lpm)
0.78 5.4 3.2 3.2 0
1.15 8.6 5.1 4.7
1.50 11.5 8.0 6.4 1400
1800
1.83 14.3 10.7 9.1 1200 1600
2.12 16.7 13.1 11.4
TORQUE : lb-ft

1400

TORQUE : N.m
2.38 18.9 15.3 13.6 1000
2.60 20.7 17.1 15.4 1200
800
2.77 22.2 18.5 16.7 1000
600

FULL LOAD
2.89 23.2 19.5 17.7 800
2.97 23.8 20.1 18.4 400 600
3.00 24.1 20.4 18.6 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 30 22
Hole Size gpm (lpm) 160 (610) 20
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 3/4 5 1/2 5 7/8 25 18
0.0 2.89 3.00 3.00 16
20
3.5 2.38 3.00 3.00 130 (490) 14
7.0 2.12 2.77 3.00 12
15
10.5 1.83 2.38 2.60 10
14.0 1.15 1.83 2.38 100 (380) 8
10
17.5 0.78 1.50 1.83 6
21.0 0.39 1.15 1.50 5 70 (260) 4
24.5 0.00 0.78 1.15 2
28.0 0.39 0.78 0 0
31.5 0.00 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 200 psi (1380 kPa) @ 130 gpm (490 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 88 11- 89
3 3/4'' 6/7 M/L 3.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 200 gpm 760 lpm
Revolutions per Unit Volume 0.80 rev/gal 0.211 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 1,170 lb-ft 1585 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
C 19.21 ft (5.86 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
180
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
160 200 (760)
3 1/2 REG
Weight: 500 lbs (230 kg) 140

SPEED : RPM
120 160 (610)
Predicted Build Rates - Degrees/100ft (30m) 100
Bend Slick 120 (450)
80
Setting
60 80 (300)
Hole Size
Deg 4 3/4 5 1/2 5 7/8
40
0.39 2.4 1.8 1.8 20 gpm (lpm)
0.78 6.0 3.5 3.5 0
1.15 9.4 5.7 5.2
1.50 12.7 8.8 7.0 2000
1.83 15.7 11.8 10.0 2500
1750
2.12 18.4 14.4 12.6
TORQUE : lb-ft

1500 2000

TORQUE : N.m
2.38 20.8 16.8 14.9
2.60 22.8 18.8 16.8 1250
1500
2.77 24.4 20.3 18.4 1000
2.89 25.5 21.4 19.4
FULL LOAD
750 1000
2.97 26.2 22.1 20.2
3.00 26.5 22.4 20.4 500
500
250
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 50
35
Hole Size 45
OUTPUT POWER : HP

Deg/100ft 4 3/4 5 1/2 5 7/8 40 200 (760) 30

OUTPUT POWER : kW
0.0 2.77 3.00 3.00 35 25
3.5 2.38 3.00 3.00 30 160 (610)
7.0 1.83 2.60 3.00 20
25
10.5 1.50 2.38 2.60 120 (450)
20 15
14.0 1.15 1.83 2.38
17.5 0.78 1.50 1.83 15 10
80 (300)
21.0 0.39 1.15 1.50 10
5
24.5 0.39 0.78 1.15 5
gpm (lpm)
28.0 0.00 0.39 0.78 0 0
31.5 0.00 0.39
35.0 0.00 0.00 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 145 psi (1000 kPa) @ 160 gpm (610 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 90 11- 91
3 3/4'' 7/8 M/L 2.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 0.56 rev/gal 0.148 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 1,160 lb-ft 1572 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
C 19.21 ft (5.86 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
100
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
90
3 1/2 REG 160 (610)
80
Weight: 500 lbs (230 kg) 140 (530)

SPEED : RPM
70
60 120 (450)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick 50 100 (380)
Setting 40
Hole Size 30
Deg 4 3/4 5 1/2 5 7/8 20 gpm (lpm)
0.39 2.4 1.8 1.8 10
0.78 6.0 3.5 3.5 0
1.15 9.4 5.7 5.2
1.50 12.7 8.8 7.0 2000
1.83 15.7 11.8 10.0 2500
1750
2.12 18.4 14.4 12.6
1500 2000

TORQUE : N.m
TORQUE : lb-ft

2.38 20.8 16.8 14.9


2.60 22.8 18.8 16.8 1250
1500
2.77 24.4 20.3 18.4 1000

FULL LOAD
2.89 25.5 21.4 19.4
750 1000
2.97 26.2 22.1 20.2
3.00 26.5 22.4 20.4 500
500
250
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 25
18
Hole Size

OUTPUT POWER : kW
16
OUTPUT POWER : HP

Deg/100ft 4 3/4 5 1/2 5 7/8 160 (610)


20
0.0 2.77 3.00 3.00 14
140 (530)
3.5 2.38 3.00 3.00 12
15 120 (450)
7.0 1.83 2.60 3.00 10
10.5 1.50 2.38 2.60 100 (380) 8
10
14.0 1.15 1.83 2.38
6
17.5 0.78 1.50 1.83
5 gpm (lpm) 4
21.0 0.39 1.15 1.50
24.5 0.39 0.78 1.15 2
28.0 0.00 0.39 0.78 0 0
31.5 0.00 0.39
35.0 0.00 0.00 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 145 psi (1000 kPa) @ 140 gpm (530 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 92 11- 93
3 3/4'' 7/8 M/L 2.3 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 0.88 rev/gal 0.232 rev/l
Pressure at Full Load 300 psi 2070 kPa
Torque at Full Load 920 lb-ft 1247 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 17.5 ft (5.33 m)
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
140
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
160 (610)
3 1/2 REG 120
Weight: 460 lbs (210 kg) 140 (530)

SPEED : RPM
100
120 (450)
Predicted Build Rates - Degrees/100ft (30m) 80
Bend Slick 100 (380)
60
Setting
Hole Size 40 gpm (lpm)
Deg 4 3/4 5 1/2 5 7/8
20
0.39 2.7 2.2 1.9
0.78 6.6 3.8 3.8 0
1.15 10.3 6.2 5.6
1.50 13.8 9.7 7.7 1400
1800
1.83 17.1 12.9 10.9 1200 1600
2.12 20.0 15.7 13.7
1400

TORQUE : N.m
TORQUE : lb-ft

2.38 22.6 18.3 16.2 1000


2.60 24.8 20.4 18.3 1200
800
2.77 26.5 22.1 20.0 1000
600 800

FULL LOAD
2.89 27.7 23.2 21.1
2.97 28.5 24.0 21.9 400 600
3.00 28.8 24.3 22.2 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 24
Hole Size 22 16
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 3/4 5 1/2 5 7/8 20
18 14
0.0 2.60 3.00 3.00 160 (610)
16 12
3.5 2.12 3.00 3.00
14 140 (530) 10
7.0 1.83 2.60 3.00
12
10.5 1.50 2.12 2.60 120 (450) 8
10
14.0 1.15 1.83 2.38 8 6
100 (380)
17.5 0.78 1.50 1.83 6 4
21.0 0.39 1.15 1.50 4 gpm (lpm)
24.5 0.39 0.78 1.15 2 2
28.0 0.00 0.78 1.15 0 0
31.5 0.39 0.78
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 180 psi (1240 kPa) @ 140 gpm (530 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 94 11- 95
3 3/4'' 7/8 M/L 2.3 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 0.88 rev/gal 0.232 rev/l
Pressure at Full Load 300 psi 2070 kPa
Torque at Full Load 920 lb-ft 1247 Nm
Maximum Weight on Bit 27,000 lbs 120 kN
Maximum Pull to Re-Run Motor 72,000 lbs 320 kN
A 1 ft (0.3 m) Pull to Yield Motor 174,000 lbs 780 kN
B 3 ft (0.91 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 16.2 ft (4.94 m)
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 4.37 in
(111 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 100 200 300 400 psi
Common Top Connection: 2 3/8 REG 2 3/8 IF
2 7/8 REG 3 1/2 REG
140
Common Bottom Connection: 2 3/8 REG 2 7/8 REG
160 (610)
3 1/2 REG 120
Weight: 430 lbs (190 kg) 140 (530)

SPEED : RPM
100
120 (450)
Predicted Build Rates - Degrees/100ft (30m) 80
Bend Slick Single Two 100 (380)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40
Deg 4 3/4 5 1/2 5 7/8 4 3/4 5 1/2 5 7/8 4 3/4 5 1/2 5 7/8 gpm (lpm)
0.35 1.8 1.8 1.8 2.1 3.2 3.7 2.1 2.1 2.1 20
0.69 5.4 3.6 3.5 5.4 6.3 6.7 4.5 4.6 4.6
1.04 9.1 5.4 5.3 9.1 9.5 9.9 8.7 8.2 8.2 0
1.37 12.6 7.1 7.0 12.6 12.5 12.9 12.6 11.6 11.6
1.69 15.9 10.4 8.6 15.9 15.4 15.7 15.9 14.9 14.9 1400
2.00 19.2 13.5 10.9 19.2 18.2 18.5 19.2 18.1 18.1 1800
2.29 22.2 16.5 13.8 22.2 20.8 21.1 22.2 20.8 21.1 1200 1600
2.57 25.2 19.4 16.7 25.2 23.3 23.6 25.2 23.3 23.6 1400

TORQUE : N.m
TORQUE : lb-ft

2.83 27.9 22.1 19.3 27.9 25.7 26.0 27.9 25.7 26.0 1000
3.06 30.3 24.4 21.6 30.3 27.8 28.0 30.3 27.8 28.0 1200
800
3.28 32.6 26.7 23.9 32.6 29.8 30.0 32.6 29.8 30.0 1000
3.46 34.5 28.5 25.7 34.5 31.4 31.6 34.5 31.4 31.6 600 800

FULL LOAD
3.63 36.3 30.3 27.4 36.3 32.9 33.1 36.3 32.9 33.1
3.76 37.6 31.6 28.7 37.6 34.1 34.3 37.6 34.1 34.3 400 600
3.86 38.7 32.6 29.8 38.7 35.0 35.2 38.7 35.0 35.2 400
3.94 39.5 33.4 30.6 39.5 35.8 35.9 39.5 35.8 35.9 200
200
3.98 39.9 33.8 31.0 39.9 36.1 36.3 39.9 36.1 36.3
0 0
4.00 40.2 34.1 31.2 40.2 36.3 36.5 40.2 36.3 36.5

Maximum Adjustable Bend Setting 24


For Rotary Drilling - Degrees 22 16

OUTPUT POWER : kW
OUTPUT POWER : HP

Hole Slick Single Two 20


Curvature Stabilizer Stabilizer 18 14
Hole Size Hole Size Hole Size 160 (610) 12
16
Deg/100ft 4 3/4 5 1/2 5 7/8 4 3/4 5 1/2 5 7/8 4 3/4 5 1/2 5 7/8
14 10
0.0 2.29 3.28 3.63 2.00 2.00 2.29 1.69 1.69 1.69 140 (530)
4.0 2.00 2.83 3.28 1.69 1.69 1.69 1.37 1.37 1.37 12
10 120 (450) 8
8.0 1.69 2.57 3.06 1.37 1.37 1.37 1.04 1.04 1.04
12.0 1.37 2.29 2.57 1.04 1.04 1.04 0.69 0.69 0.69 8 100 (380) 6
16.0 1.04 2.00 2.29 0.69 0.69 0.69 0.35 0.35 0.35 6 4
20.0 0.69 1.37 2.00 0.00 0.00 0.35 0.00 0.00 0.00 4
gpm (lpm) 2
24.0 0.35 1.04 1.69 2
28.0 0.00 0.69 1.37 0 0
32.0 0.35 1.04
36.0 0.00 0.69
40.0 0.00 0.35 1. Total pressure loss through motor with no load is
44.0 0.00 approximately 170 psi (1170 kPa) @ 140 gpm (530 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 96 11- 97
3 3/4'' 7/8 M/L 6.7 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 160 gpm 610 lpm
Revolutions per Unit Volume 1.75 rev/gal 0.462 rev/l
Pressure at Full Load 870 psi 5990 kPa
Torque at Full Load 1,260 lb-ft 1707 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 20.8 ft (6.34 m)
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 2 7/8 REG 3 1/2 REG
2 3/8 IF 2 3/8 REG
300
Common Bottom Connection: 2 7/8 REG 3 1/2 REG 160 (610)
2 3/8 REG 250 140 (530)
Weight: 550 lbs (250 kg)

SPEED : RPM
200 120 (450)
Predicted Build Rates - Degrees/100ft (30m) 100 (380)
Bend Slick 150
Setting gpm (lpm)
100
Hole Size
Deg 4 3/4 5 1/2 5 7/8 50
0.39 2.2 1.6 1.6
0.78 5.4 3.2 3.2 0
1.15 8.6 5.1 4.7
1.50 11.5 8.0 6.4 2200
1.83 14.3 10.7 9.1 2000
1800 2500
2.12 16.7 13.1 11.4

TORQUE : N.m
TORQUE : lb-ft

2.38 18.9 15.3 13.6 1600


1400 2000
2.60 20.7 17.1 15.4
1200
2.77 22.2 18.5 16.7 1500
1000
2.89 23.2 19.5 17.7
FULL LOAD
800 1000
2.97 23.8 20.1 18.4
600
3.00 24.1 20.4 18.6
400 500
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 70
50
Hole Size 160 (610)
OUTPUT POWER : HP

OUTPUT POWER : kW
60
Deg/100ft 4 3/4 5 1/2 5 7/8
40
0.0 2.89 3.00 3.00 50 140 (530)
3.5 2.38 3.00 3.00
40 120 (450) 30
7.0 2.12 2.77 3.00
10.5 1.83 2.38 2.60 30 100 (380) 20
14.0 1.15 1.83 2.38
17.5 0.78 1.50 1.83 20
gpm (lpm) 10
21.0 0.39 1.15 1.50
10
24.5 0.00 0.78 1.15
28.0 0.39 0.78 0 0
31.5 0.00 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 230 psi (1580 kPa) @ 140 gpm (530 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 98 11- 99
3 3/4'' 7/8 M/L 10.1 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 210 gpm 790 lpm
Revolutions per Unit Volume 1.98 rev/gal 0.523 rev/l
Pressure at Full Load 1,310 psi 9030 kPa
Torque at Full Load 1,830 lb-ft 2480 Nm
Maximum Weight on Bit 36,000 lbs 160 kN
Maximum Pull to Re-Run Motor 75,000 lbs 340 kN
Pull to Yield Motor 212,000 lbs 950 kN
B 4 ft (1.22 m)
C 24.6 ft (7.5 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 10000 kPa
D Maximum Diameter of Motor at Upset: 3.75 in
(95 mm)
E Radius of Offset Pad: 2.18 in (55 mm) 0 200 400 600 800 1000 1200 1400 1600 psi
Common Top Connection: 2 7/8 REG 3 1/2 REG
2 3/8 IF 2 3/8 REG
450
Common Bottom Connection: 2 7/8 REG 3 1/2 REG 210 (790)
400
2 3/8 REG
Weight: 650 lbs (290 kg) 350

SPEED : RPM
160 (610)
300
Predicted Build Rates - Degrees/100ft (30m) 250
Bend Slick 120 (450)
200
Setting
150 80 (300)
Hole Size
Deg 4 3/4 5 1/2 5 7/8
100
gpm (lpm)
0.39 1.8 1.4 1.4 50
0.78 4.6 2.8 2.8 0
1.15 7.3 4.3 4.1
1.50 9.8 6.8 5.4 2500
1.83 12.2 9.2 7.8 3000
2.12 14.3 11.3 9.8 2000
TORQUE : lb-ft

2500

TORQUE : N.m
2.38 16.2 13.1 11.7
2.60 17.8 14.7 13.2 1500 2000
2.77 19.0 15.9 14.4
2.89 19.9 16.8 15.3 1500

FULL LOAD
1000
2.97 20.5 17.3 15.8 1000
3.00 20.7 17.6 16.0 500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick
Curvature 160
Hole Size 140 gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 4 3/4 5 1/2 5 7/8 100
0.0 3.00 3.00 3.00 120
210 (790)
80
3.0 2.89 3.00 3.00 100
6.0 2.38 3.00 3.00 160 (610)
80 60
9.0 2.12 2.77 3.00
12.0 1.83 2.38 2.60 60 120 (450) 40
15.0 1.15 1.83 2.12 40
18.0 0.78 1.50 1.83 80 (300)
20
20
21.0 0.39 1.15 1.50
24.0 0.00 0.78 1.15 0 0
27.0 0.39 0.78
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 240 psi (1650 kPa) @ 160 gpm (610 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 100 11- 101
4 3/4'' 1/2 H/S 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 200 gpm 760 lpm
Revolutions per Unit Volume 2.25 rev/gal 0.594 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 510 lb-ft 691 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 20.2 ft (6.16 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
500
Common Bottom Connection: 3 1/2 REG
450
200 (760)
400
Weight: 850 lbs (390 kg) 170 (640)

SPEED : RPM
350
Predicted Build Rates - Degrees/100ft (30m) 300 140 (530)
Bend Slick Single Two 250
110 (420)
Setting Stabilizer Stabilizers 200
Hole Size Hole Size Hole Size 150
gpm (lpm)
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100
0.39 1.7 1.7 1.9 2.9 3.2 3.6 2.0 2.0 2.0 50
0.78 4.9 4.0 3.3 5.7 5.9 6.3 5.1 5.1 5.1 0
1.15 8.0 7.1 5.4 8.4 8.6 9.0 8.0 8.0 8.0
1.50 11.0 10.1 8.3 11.0 11.1 11.4 11.0 10.8 10.8 800
1.83 13.8 12.9 11.1 13.8 13.4 13.7 13.8 13.4 13.4 1000
700
2.12 16.3 15.3 13.5 16.3 15.3 15.8 16.3 15.5 15.7
600

TORQUE : N.m
800
TORQUE : lb-ft

2.38 18.5 17.5 15.7 18.5 17.5 17.6 18.5 17.5 17.6
2.60 20.4 19.4 17.5 20.4 19.4 19.2 20.4 19.4 19.2 500
600
2.77 21.8 20.8 18.9 21.8 20.8 20.4 21.8 20.8 20.4 400
FULL LOAD
2.89 22.8 21.8 19.9 22.8 21.8 21.2 22.8 21.8 21.2
300 400
2.97 23.5 22.5 20.6 23.5 22.5 21.8 23.5 22.5 21.8
3.00 23.8 22.8 20.9 23.8 22.8 22.0 23.8 22.8 22.0 200
200
100
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 50
35
Hole Size Hole Size Hole Size 45

OUTPUT POWER : kW
OUTPUT POWER : HP

200 (760)
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 40 30
0.0 3.00 3.00 3.00 2.60 2.89 3.00 2.38 2.60 3.00 35 170 (640) 25
3.5 3.00 3.00 3.00 2.38 2.38 3.00 2.12 2.12 2.89 30
7.0 2.60 2.89 3.00 1.83 2.12 2.77 1.83 1.83 2.38 140 (530) 20
25
10.5 2.38 2.38 2.89 1.50 1.83 2.38 1.15 1.50 1.83
20 15
14.0 1.83 2.12 2.38 1.15 1.50 1.83 0.78 1.15 1.50 110 (420)
17.5 1.50 1.83 2.12 0.78 1.15 1.50 0.78 1.15 1.15 15 10
21.0 1.15 1.15 1.83 0.78 0.78 0.78 0.39 0.39 0.39 10 gpm (lpm)
5
24.5 0.78 0.78 1.15 0.39 0.39 0.39 0.00 0.00 0.00 5
28.0 0.39 0.39 0.78 0.00 0.00 0.00 0 0
31.5 0.00 0.39 0.39
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 90 psi (620 kPa) @ 170 gpm (640 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 102 11- 103
4 3/4'' 1/2 H/S 4.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 200 gpm 760 lpm
Revolutions per Unit Volume 3.10 rev/gal 0.819 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 500 lb-ft 678 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 20.2 ft (6.16 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
700
Common Bottom Connection: 3 1/2 REG
600 200 (760)
Weight: 850 lbs (390 kg)

SPEED : RPM
500
150 (570)
Predicted Build Rates - Degrees/100ft (30m) 400
Bend Slick Single Two
300 100 (380)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 200
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50 (190)
100
0.39 1.7 1.7 1.9 2.9 3.2 3.6 2.0 2.0 2.0 gpm (lpm)
0.78 4.9 4.0 3.3 5.7 5.9 6.3 5.1 5.1 5.1 0
1.15 8.0 7.1 5.4 8.4 8.6 9.0 8.0 8.0 8.0
1.50 11.0 10.1 8.3 11.0 11.1 11.4 11.0 10.8 10.8 800
1.83 13.8 12.9 11.1 13.8 13.4 13.7 13.8 13.4 13.4 1000
700
2.12 16.3 15.3 13.5 16.3 15.3 15.8 16.3 15.5 15.7
600 800

TORQUE : N.m
TORQUE : lb-ft

2.38 18.5 17.5 15.7 18.5 17.5 17.6 18.5 17.5 17.6
2.60 20.4 19.4 17.5 20.4 19.4 19.2 20.4 19.4 19.2 500
2.77 21.8 20.8 18.9 21.8 20.8 20.4 21.8 20.8 20.4 600
400
2.89 22.8 21.8 19.9 22.8 21.8 21.2 22.8 21.8 21.2
300 FULL LOAD 400
2.97 23.5 22.5 20.6 23.5 22.5 21.8 23.5 22.5 21.8
3.00 23.8 22.8 20.9 23.8 22.8 22.0 23.8 22.8 22.0 200
200
100
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 60
Hole Size Hole Size Hole Size gpm (lpm) 40

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50


0.0 3.00 3.00 3.00 2.60 2.89 3.00 2.38 2.60 3.00 200 (760)
40 30
3.5 3.00 3.00 3.00 2.38 2.38 3.00 2.12 2.12 2.89
7.0 2.60 2.89 3.00 1.83 2.12 2.77 1.83 1.83 2.38 150 (570)
30
10.5 2.38 2.38 2.89 1.50 1.83 2.38 1.15 1.50 1.83 20
14.0 1.83 2.12 2.38 1.15 1.50 1.83 0.78 1.15 1.50 20
17.5 1.50 1.83 2.12 0.78 1.15 1.50 0.78 1.15 1.15 100 (380)
10
21.0 1.15 1.15 1.83 0.78 0.78 0.78 0.39 0.39 0.39 10
24.5 0.78 0.78 1.15 0.39 0.39 0.39 0.00 0.00 0.00 50 (190)
28.0 0.39 0.39 0.78 0.00 0.00 0.00 0 0
31.5 0.00 0.39 0.39
35.0 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 130 psi (900 kPa) @ 150 gpm (570 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 104 11- 105
4 3/4'' 1/2 H/S 6.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 2.96 rev/gal 0.782 rev/l
Pressure at Full Load 850 psi 5860 kPa
Torque at Full Load 850 lb-ft 1152 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 25.9 ft (7.89 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
800
Common Bottom Connection: 3 1/2 REG
700 250 (950)

Weight: 1090 lbs (490 kg) 600

SPEED : RPM
200 (760)
500
Predicted Build Rates - Degrees/100ft (30m)
400 150 (570)
Bend Slick Single Two
Setting Stabilizer Stabilizers 300
100 (380)
Hole Size Hole Size Hole Size 200
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
0.39 1.3 1.3 1.3 2.3 2.4 2.7 1.7 1.7 1.7 100 gpm (lpm)
0.78 3.8 3.1 2.6 4.6 4.7 5.0 4.3 4.3 4.3 0
1.15 6.3 5.6 4.2 6.8 6.9 7.2 6.7 6.7 6.7
1.50 8.7 8.0 6.6 8.9 9.0 9.2 8.9 9.0 9.0 1200 1600
1.83 11.0 10.2 8.8 11.0 11.0 11.2 11.0 11.0 11.1 1400
1000
2.12 12.9 12.2 10.8 12.9 12.7 12.9 12.9 12.7 12.9
TORQUE : lb-ft

1200

TORQUE : N.m
2.38 14.7 14.0 12.5 14.7 14.2 14.4 14.7 14.2 14.4 800
2.60 16.2 15.5 14.0 16.2 15.5 15.7 16.2 15.6 15.7 1000
2.77 17.4 16.6 15.1 17.4 16.6 16.7 17.4 16.6 16.7 600 800
2.89 18.2 17.4 15.9 18.2 17.4 17.4 18.2 17.4 17.4

FULL LOAD
600
2.97 18.7 18.0 16.5 18.7 18.0 17.9 18.7 18.0 17.9 400
3.00 18.9 18.2 16.7 18.9 18.2 18.1 18.9 18.2 18.1 400
200
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 80
Hole Size Hole Size Hole Size 70
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 gpm (lpm) 50
0.0 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 60
250 (950) 40
3.0 3.00 3.00 3.00 2.60 2.89 3.00 2.60 2.60 3.00 50
6.0 3.00 3.00 3.00 2.12 2.38 3.00 2.12 2.12 2.77
40 200 (760) 30
9.0 2.77 3.00 3.00 1.83 2.12 2.38 1.83 1.83 2.12
12.0 2.38 2.60 2.89 1.50 1.83 2.12 1.15 1.50 1.83 30
150 (570) 20
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15 20
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 10
10 100 (380)
21.0 1.15 1.15 1.50 0.39 0.39 0.39 0.39 0.39 0.39
24.0 0.78 0.78 1.15 0.00 0.00 0.00 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 210 psi (1450 kPa) @ 200 gpm (760 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 106 11- 107
4 3/4'' 2/3 M/L 8.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 265 gpm 1000 lpm
Revolutions per Unit Volume 1.98 rev/gal 0.523 rev/l
Pressure at Full Load 1,040 psi 7170 kPa
Torque at Full Load 1,300 lb-ft 1762 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 29.66 ft (9.04 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
600
Common Bottom Connection: 3 1/2 REG
500 265 (1000)
Weight: 1250 lbs (570 kg)

SPEED : RPM
400 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 300 150 (570)
Setting Stabilizer Stabilizers
200
Hole Size Hole Size Hole Size 100 (380)
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100
0.39 1.2 1.2 1.2 2.0 2.1 2.3 1.5 1.5 1.6 gpm (lpm)
0.78 3.3 2.7 2.3 4.1 4.2 4.4 3.8 3.8 3.8 0
1.15 5.6 5.0 3.7 6.1 6.2 6.4 6.0 6.0 6.0
1.50 7.7 7.1 5.8 8.0 8.1 8.2 8.0 8.1 8.1 1600
1.83 9.7 9.1 7.8 9.7 9.8 10.0 9.8 9.8 10.0 2000
1400
2.12 11.5 10.8 9.6 11.5 11.4 11.6 11.5 11.4 11.6
TORQUE : lb-ft

1200

TORQUE : N.m
2.38 13.1 12.4 11.1 13.1 12.8 12.9 13.1 12.8 12.9 1500
2.60 14.4 13.7 12.4 14.4 14.0 14.1 14.4 14.0 14.1 1000
2.77 15.4 14.7 13.4 15.4 14.7 15.0 15.4 14.9 15.0 800
1000
2.89 16.1 15.5 14.2 16.1 15.5 15.7 16.1 15.6 15.7

FULL LOAD
600
2.97 16.6 16.0 14.6 16.6 16.0 16.1 16.6 16.0 16.1
3.00 16.8 16.1 14.8 16.8 16.1 16.3 16.8 16.1 16.3 400 500
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 110 80
Hole Size Hole Size Hole Size 100

OUTPUT POWER : kW
OUTPUT POWER : HP

70
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 90 gpm (lpm)
0.0 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 80 60
3.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 3.00 3.00 70 50
6.0 3.00 3.00 3.00 2.38 2.60 3.00 2.38 2.38 3.00 60 265 (1000)
40
9.0 3.00 3.00 3.00 1.83 2.12 2.60 1.83 1.83 2.38 50
40 200 (760) 30
12.0 2.60 2.77 3.00 1.50 1.83 2.12 1.50 1.83 1.83
15.0 2.12 2.12 2.60 1.15 1.50 1.50 0.78 1.15 1.15 30 150 (570)
20
18.0 1.50 1.83 2.12 0.78 0.78 0.78 0.78 0.78 0.78 20 100 (380)
10 10
21.0 1.15 1.15 1.50 0.39 0.39 0.39 0.39 0.39 0.39
24.0 0.78 0.78 1.15 0.00 0.00 0.00 0 0
27.0 0.00 0.39 0.78
30.0 0.00 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 230 psi (1580 kPa) @ 200 gpm (760 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 108 11- 109
4 3/4'' 3/4 M/L 9.9 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 2.30 rev/gal 0.608 rev/l
Pressure at Full Load 1,290 psi 8890 kPa
Torque at Full Load 1,740 lb-ft 2358 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 22.6 ft (6.89 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 10000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 1200 1400 1600 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
600
Common Bottom Connection: 3 1/2 REG 250 (950)
500
Weight: 950 lbs (430 kg) 200 (760)

SPEED : RPM
400
Predicted Build Rates - Degrees/100ft (30m) 150 (570)
Bend Slick Single Two 300
Setting Stabilizer Stabilizers 100 (380)
200
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100
0.39 1.5 1.5 1.5 2.6 2.8 3.2 1.9 1.9 1.9 gpm (lpm)
0.78 4.4 3.6 3.0 5.2 5.4 5.7 4.7 4.7 4.7 0
1.15 7.2 6.4 4.9 7.6 7.8 8.1 7.4 7.4 7.4
1.50 9.9 9.1 7.5 9.9 10.1 10.4 10.0 10.0 10.0 2200
1.83 12.5 11.6 10.0 12.5 12.3 12.6 12.5 12.3 12.4 2000
1800 2500
2.12 14.7 13.9 12.2 14.7 14.2 14.4 14.7 14.2 14.4

TORQUE : N.m
1600
TORQUE : lb-ft

2.38 16.7 15.9 14.2 16.7 15.9 16.1 16.7 15.9 16.1 2000
1400
2.60 18.4 17.5 15.9 18.4 17.5 17.6 18.4 17.5 17.6
1200
2.77 19.7 18.8 17.1 19.7 18.8 18.7 19.7 18.8 18.7 1500
1000
2.89 20.6 19.8 18.1 20.6 19.8 19.5 20.6 19.8 19.5

FULL LOAD
800 1000
2.97 21.3 20.4 18.7 21.3 20.4 20.0 21.3 20.4 20.0
600
3.00 21.5 20.6 18.9 21.5 20.6 20.2 21.5 20.6 20.2
400 500
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 220 160
Hole Size Hole Size Hole Size 200
OUTPUT POWER : HP

140

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 180 gpm (lpm)
0.0 3.00 3.00 3.00 2.89 3.00 3.00 2.60 2.77 3.00 160 120
250 (950)
3.5 3.00 3.00 3.00 2.38 2.60 3.00 2.12 2.38 3.00 140 100
7.0 2.77 3.00 3.00 1.83 2.12 2.77 1.83 1.83 2.38 120 200 (760) 80
10.5 2.38 2.60 3.00 1.50 1.83 2.12 1.50 1.50 1.83 100
14.0 1.83 2.12 2.38 1.15 1.50 1.83 0.78 1.50 1.50 80 150 (570) 60
17.5 1.50 1.83 2.12 0.78 1.15 1.15 0.78 0.78 0.78 60 40
40 100 (380)
21.0 1.15 1.15 1.50 0.78 0.78 0.78 0.39 0.39 0.39
20 20
24.5 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00
28.0 0.39 0.39 0.78 0 0
31.5 0.00 0.00 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 260 psi (1790 kPa) @ 200 gpm (760 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 110 11- 111
4 3/4'' 4/5 M/L 3.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 1.08 rev/gal 0.285 rev/l
Pressure at Full Load 460 psi 3170 kPa
Torque at Full Load 1,210 lb-ft 1640 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 18 ft (5.49 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
300
Common Bottom Connection: 3 1/2 REG
250 250 (950)
Weight: 760 lbs (340 kg)

SPEED : RPM
200 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 150 150 (570)
Setting Stabilizer Stabilizers
100 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50
0.39 1.8 1.8 2.1 3.3 3.6 4.1 2.1 2.1 2.2 gpm (lpm)
0.78 5.5 4.5 3.6 6.3 6.6 7.1 5.5 5.5 5.5 0
1.15 9.0 8.0 6.1 9.0 9.4 9.9 8.7 8.7 8.7
1.50 12.2 11.2 9.3 12.2 12.1 12.5 12.1 11.7 11.7 2500
1.83 15.3 14.3 12.3 15.3 14.3 15.0 15.3 14.5 14.5 3000
2.12 18.0 17.0 15.0 18.0 17.0 17.2 18.0 17.0 17.0 2000
2500

TORQUE : N.m
TORQUE : lb-ft

2.38 20.5 19.4 17.3 20.5 19.4 19.2 20.5 19.4 19.2
2.60 22.5 21.4 19.4 22.5 21.4 20.9 22.5 21.4 20.9 1500 2000
2.77 24.1 23.0 20.9 24.2 23.0 22.2 24.2 23.0 22.2
2.89 25.2 24.1 22.0 25.4 24.1 23.1 25.4 24.1 23.1 1500
FULL LOAD
1000
2.97 26.0 24.9 22.7 26.3 24.9 23.7 26.3 24.9 23.7 1000
3.00 26.3 25.2 23.0 26.6 25.2 23.9 26.6 25.2 23.9 500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 70
50
Hole Size Hole Size Hole Size gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
60
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
250 (950) 40
0.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.38 2.77 50
3.5 2.89 3.00 3.00 2.12 2.38 3.00 1.83 2.12 2.77
40 30
7.0 2.60 2.77 3.00 1.83 2.12 2.77 1.50 1.83 2.38 200 (760)
10.5 2.12 2.38 2.89 1.50 1.83 2.38 1.15 1.50 1.83 30
14.0 1.83 2.12 2.38 1.15 1.50 1.83 0.78 1.15 1.50 20
150 (570)
17.5 1.50 1.83 2.12 0.78 1.50 1.50 0.78 1.15 1.15 20
21.0 1.15 1.50 1.83 0.78 1.15 1.15 0.39 0.78 0.78 10
10 100 (380)
24.5 0.78 1.15 1.50 0.39 0.39 0.78 0.39 0.39 0.39
28.0 0.39 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
31.5 0.00 0.39 0.78 0.00
35.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 112 11- 113
4 3/4'' 4/5 M/L 6.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 1.08 rev/gal 0.285 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 2,080 lb-ft 2818 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 25.1 ft (7.65 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
300
Common Bottom Connection: 3 1/2 REG
250 250 (950)
Weight: 1060 lbs (480 kg)

SPEED : RPM
200 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 150 150 (570)
Setting Stabilizer Stabilizers
100 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50
0.39 1.4 1.4 1.4 2.5 2.6 2.9 1.8 1.8 1.8 gpm (lpm)
0.78 4.1 3.4 2.8 4.9 5.1 5.4 4.5 4.5 4.5 0
1.15 6.8 6.1 4.6 7.3 7.4 7.7 7.1 7.1 7.1
1.50 9.4 8.6 7.1 9.4 9.6 9.9 9.5 9.5 9.5 3000 4000
1.83 11.8 11.0 9.5 11.8 11.7 12.0 11.8 11.7 11.8 3500
2500
2.12 13.9 13.1 11.6 13.9 13.6 13.8 13.9 13.6 13.8
3000

TORQUE : N.m
TORQUE : lb-ft

2.38 15.8 15.0 13.5 15.8 15.0 15.4 15.8 15.2 15.4 2000
2.60 17.5 16.6 15.1 17.5 16.6 16.8 17.5 16.6 16.8 2500
2.77 18.7 17.9 16.3 18.7 17.9 17.8 18.7 17.9 17.8 1500 2000
2.89 19.6 18.8 17.1 19.6 18.8 18.6 19.6 18.8 18.6

FULL LOAD
1500
2.97 20.2 19.3 17.7 20.2 19.3 19.1 20.2 19.3 19.1 1000
3.00 20.4 19.6 17.9 20.4 19.6 19.3 20.4 19.6 19.3 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 120
Hole Size Hole Size Hole Size gpm (lpm) 80

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100


70
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 3.00 3.00
80 250 (950) 60
3.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.60 3.00
6.0 3.00 3.00 3.00 2.12 2.38 3.00 2.12 2.12 2.60 50
60 200 (760)
9.0 2.60 2.89 3.00 1.83 1.83 2.38 1.50 1.83 2.12 40
12.0 2.12 2.38 2.77 1.50 1.83 2.12 1.15 1.50 1.83 40 150 (570) 30
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15
100 (380) 20
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 20
21.0 1.15 1.15 1.50 0.39 0.78 0.78 0.39 0.39 0.39 10
24.0 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 114 11- 115
4 3/4'' 4/5 M/L 6.3 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 1.08 rev/gal 0.285 rev/l
Pressure at Full Load 820 psi 5650 kPa
Torque at Full Load 2,180 lb-ft 2954 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 25.66 ft (7.82 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
300
Common Bottom Connection: 3 1/2 REG
250 250 (950)
Weight: 1080 lbs (490 kg)

SPEED : RPM
200 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 150 150 (570)
Setting Stabilizer Stabilizers
100 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50
0.39 1.4 1.3 1.3 2.3 2.4 2.7 1.7 1.7 1.7 gpm (lpm)
0.78 3.8 3.1 2.7 4.6 4.8 5.0 4.3 4.3 4.3 0
1.15 6.4 5.7 4.3 6.9 7.0 7.2 6.7 6.7 6.7
1.50 8.8 8.1 6.7 9.0 9.1 9.3 9.0 9.0 9.0 3500
4500
1.83 11.1 10.3 8.9 11.1 11.1 11.3 11.1 11.1 11.2 3000 4000
2.12 13.1 12.3 10.9 13.1 12.8 13.0 13.1 12.8 13.0

TORQUE : N.m
3500
TORQUE : lb-ft

2.38 14.9 14.1 12.6 14.9 14.4 14.6 14.9 14.4 14.6 2500
2.60 16.4 15.6 14.1 16.4 15.6 15.9 16.4 15.6 15.9 3000
2000
2.77 17.5 16.8 15.3 17.5 16.8 16.9 17.5 16.8 16.9 2500
2.89 18.4 17.6 16.1 18.4 17.6 17.6 18.4 17.6 17.6 1500 2000
2.97 18.9 18.2 16.6 18.9 18.2 18.1 18.9 18.2 18.1 1000 FULL LOAD 1500
3.00 19.1 18.4 16.8 19.1 18.4 18.2 19.1 18.4 18.2 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 120
Hole Size Hole Size Hole Size gpm (lpm) 80

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100


250 (950) 70
0.0 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
80 60
3.0 3.00 3.00 3.00 2.60 2.89 3.00 2.60 2.60 3.00
200 (760) 50
6.0 3.00 3.00 3.00 2.12 2.38 3.00 2.12 2.12 2.77
60
9.0 2.77 3.00 3.00 1.83 2.12 2.38 1.50 1.83 2.12 40
150 (570)
12.0 2.38 2.60 2.89 1.50 1.83 2.12 1.15 1.50 1.83 40 30
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15
20
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 20 100 (380)
21.0 1.15 1.15 1.50 0.39 0.39 0.39 0.39 0.39 0.39 10
24.0 0.78 0.78 1.15 0.00 0.00 0.00 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 116 11- 117
4 3/4'' 5/6 M/L 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 1.12 rev/gal 0.296 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 940 lb-ft 1274 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 16 ft (4.88 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
300
Common Bottom Connection: 3 1/2 REG 250 (950)
250
Weight: 670 lbs (310 kg) 200 (760)

SPEED : RPM
200
Predicted Build Rates - Degrees/100ft (30m) 150 (570)
Bend Slick Single Two 150
Setting Stabilizer Stabilizers 100 (380)
100
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 50
0.39 2.2 2.0 2.4 3.7 4.1 4.7 2.4 2.4 2.4 gpm (lpm)
0.78 6.2 5.1 4.0 7.0 7.3 7.9 5.9 5.9 5.9 0
1.15 10.0 8.9 6.8 10.0 10.3 10.9 9.3 9.3 9.3
1.50 13.6 12.5 10.3 13.6 13.2 13.8 13.3 12.5 12.5 1600
1.83 17.0 15.9 13.7 17.0 15.9 16.5 17.0 15.6 15.6 2000
1400
2.12 20.0 18.9 16.6 20.0 18.9 18.8 20.0 18.9 18.3
TORQUE : lb-ft

1200

TORQUE : N.m
2.38 22.7 21.5 19.2 22.7 21.5 20.9 22.7 21.5 20.7 1500
2.60 25.0 23.8 21.4 25.2 23.8 22.7 25.2 23.8 22.7 1000
2.77 26.7 25.5 23.2 27.2 25.5 23.2 27.2 25.5 24.1 800
1000
2.89 28.0 26.8 24.4 28.6 26.8 24.4 28.6 26.8 25.1

FULL LOAD
600
2.97 28.8 27.6 25.2 29.6 27.6 25.2 29.6 27.6 25.7
3.00 29.1 27.9 25.5 30.0 27.9 25.5 30.0 27.9 26.0 400 500
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 50
35
Hole Size Hole Size Hole Size 45

OUTPUT POWER : kW
OUTPUT POWER : HP

250 (950)
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 40 30
0.0 3.00 3.00 3.00 2.38 2.60 3.00 2.12 2.38 2.60 35 25
4.0 2.77 3.00 3.00 2.12 2.38 3.00 1.83 1.83 2.60 30 200 (760)
8.0 2.38 2.60 3.00 1.83 1.83 2.60 1.50 1.50 2.12 20
25
12.0 2.12 2.12 2.77 1.50 1.50 2.12 1.15 1.15 1.50
20 15
16.0 1.83 1.83 2.38 1.15 1.50 1.50 0.78 1.15 1.15 150 (570)
20.0 1.50 1.50 2.12 0.78 1.15 1.15 0.39 0.78 0.78 15 10
24.0 1.15 1.15 1.50 0.78 0.78 0.78 0.39 0.39 0.39 10
100 (380) 5
28.0 0.78 0.78 1.15 0.00 0.39 0.39 0.00 0.00 0.00 5 gpm (lpm)
32.0 0.39 0.39 1.15 0.00 0 0
36.0 0.00 0.39 0.78
40.0 0.00 0.39 1. Total pressure loss through motor with no load is
44.0 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 118 11- 119
4 3/4'' 5/6 M/L 3.0 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 1.12 rev/gal 0.296 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 940 lb-ft 1274 Nm
Maximum Weight on Bit 50,000 lbs 230 kN
Maximum Pull to Re-Run Motor 99,000 lbs 450 kN
A 1.8 ft (0.55 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 3.8 ft (1.16 m)
C 13.9 ft (4.24 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
300
Common Bottom Connection: 3 1/2 REG 250 (950)
250
Weight: 590 lbs (270 kg) 200 (760)

SPEED : RPM
200
Predicted Build Rates - Degrees/100ft (30m) 150 (570)
Bend Slick Single Two 150
Setting Stabilizer Stabilizers
100 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
0.35 2.0 2.4 1.9 4.0 4.4 5.1 2.4 2.4 2.4 50
0.69 4.5 3.9 3.8 7.3 7.7 8.4 6.2 6.2 6.2 gpm (lpm)
1.04 8.4 6.8 5.8 10.8 11.2 11.8 10.2 10.2 10.2 0
1.37 12.2 10.5 7.6 14.1 14.4 15.0 14.0 14.0 14.0
1.69 15.8 14.1 10.8 17.3 17.6 18.2 17.3 17.6 17.7 1600
2.00 19.3 17.6 14.3 20.3 20.6 21.2 20.3 20.6 21.2 2000
2.29 22.6 20.9 17.5 22.6 23.5 24.0 23.2 23.5 24.0 1400
TORQUE : lb-ft

2.57 25.8 24.0 20.6 25.8 26.2 26.7 25.8 26.2 26.7 1200

TORQUE : N.m
2.83 28.8 26.9 23.5 28.8 28.8 29.2 28.8 28.8 29.2 1500
3.06 31.4 29.5 26.0 31.4 31.1 31.4 31.4 31.1 31.4 1000
3.28 33.9 32.0 28.4 33.9 33.2 33.6 33.9 33.2 33.6 800
3.46 35.9 34.0 30.4 35.9 34.0 35.3 35.9 35.0 35.3 1000

FULL LOAD
3.63 37.8 35.9 32.3 37.8 35.9 37.0 37.8 36.7 37.0 600
3.76 39.3 37.4 33.7 39.3 37.4 38.2 39.3 37.9 38.2
400 500
3.86 40.4 38.5 34.8 40.4 38.5 39.2 40.4 38.5 39.2
3.94 41.3 39.4 35.7 41.3 39.4 40.0 41.3 39.4 40.0 200
3.98 41.8 39.9 36.2 41.8 39.9 40.4 41.8 39.9 40.4
0 0
4.00 42.0 40.1 36.4 42.0 40.1 40.6 42.0 40.1 40.6

Maximum Adjustable Bend Setting 50


For Rotary Drilling - Degrees 45

OUTPUT POWER : kW
OUTPUT POWER : HP

Hole Slick Single Two 250 (950)


Curvature Stabilizer Stabilizer 40 30
Hole Size Hole Size Hole Size 35
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 30 200 (760)
0.0 2.83 3.06 3.76 2.29 2.57 2.83 2.00 2.29 2.29 20
4.5 2.57 2.83 3.28 2.29 2.29 2.29 2.00 2.00 2.00 25
9.0 2.29 2.57 3.06 1.69 2.00 2.00 1.69 1.69 1.37 20
150 (570)
13.5 2.00 2.00 2.57 1.37 1.37 1.69 1.04 1.04 1.04 15
18.0 1.37 1.69 2.29 1.04 1.04 1.04 0.69 0.69 0.69 10
10
22.5 1.04 1.37 2.00 0.69 0.69 0.69 0.35 0.35 0.35 100 (380)
27.0 0.69 1.04 1.69 0.35 0.35 0.35 0.00 0.00 0.00 5 gpm (lpm)
31.5 0.69 0.69 1.37 0.00 0.00 0.00 0 0
36.0 0.35 0.35 1.04
40.5 0.00 0.00 0.69
45.0 0.35 1. Total pressure loss through motor with no load is
49.5 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
54.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 120 11- 121
4 3/4'' 5/6 M/L 8.3 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 300 gpm 1140 lpm
Revolutions per Unit Volume 1.09 rev/gal 0.288 rev/l
Pressure at Full Load 1,080 psi 7440 kPa
Torque at Full Load 2,890 lb-ft 3916 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 28.6 ft (8.72 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
350
Common Bottom Connection: 3 1/2 REG 300 (1140)
300
Weight: 1200 lbs (550 kg) 250 (950)

SPEED : RPM
250
200 (760)
Predicted Build Rates - Degrees/100ft (30m) 200
Bend Slick Single Two 150 (570)
150
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 gpm (lpm)
50
0.39 1.2 1.2 1.2 2.0 2.2 2.4 1.6 1.6 1.6
0.78 3.4 2.8 2.4 4.2 4.3 4.5 3.9 3.9 3.9 0
1.15 5.8 5.1 3.9 6.3 6.4 6.6 6.2 6.2 6.2
1.50 8.0 7.3 6.0 8.2 8.3 8.5 8.2 8.3 8.3 3500
4500
1.83 10.0 9.4 8.1 10.0 10.1 10.3 10.0 10.1 10.3 3000 4000
2.12 11.8 11.2 9.8 11.8 11.7 11.9 11.8 11.7 11.9
3500

TORQUE : N.m
TORQUE : lb-ft

2.38 13.4 12.8 11.4 13.4 13.2 13.3 13.4 13.2 13.3 2500
2.60 14.8 14.1 12.8 14.8 14.4 14.5 14.8 14.4 14.5 3000
2000
2.77 15.9 15.2 13.9 15.9 15.2 15.4 15.9 15.3 15.4 2500
2.89 16.6 15.9 14.6 16.6 15.9 16.1 16.6 15.9 16.1 1500 2000

FULL LOAD
2.97 17.1 16.4 15.1 17.1 16.4 16.5 17.1 16.4 16.5 1000 1500
3.00 17.3 16.6 15.3 17.3 16.6 16.7 17.3 16.6 16.7 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 200
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 125
150 300 (1140)
0.0 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00
100
3.0 3.00 3.00 3.00 2.89 3.00 3.00 2.77 2.89 3.00 250 (950)
6.0 3.00 3.00 3.00 2.38 2.60 3.00 2.12 2.38 2.89
100 75
9.0 3.00 3.00 3.00 1.83 2.12 2.60 1.83 1.83 2.38 200 (760)
12.0 2.38 2.60 3.00 1.50 1.83 2.12 1.50 1.83 1.83 50
15.0 2.12 2.12 2.60 1.15 1.50 1.50 0.78 1.15 1.15 150 (570)
50
18.0 1.50 1.83 2.12 0.78 0.78 0.78 0.78 0.78 0.78 25
21.0 1.15 1.15 1.50 0.39 0.39 0.39 0.39 0.39 0.39 gpm (lpm)
24.0 0.78 0.78 1.15 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 approximately 200 psi (1380 kPa) @ 250 gpm (950 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 122 11- 123
4 3/4'' 6/7 M/L 6.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 350 gpm 1320 lpm
Revolutions per Unit Volume 0.87 rev/gal 0.230 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 2,230 lb-ft 3022 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 23.6 ft (7.19 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
350
Common Bottom Connection: 3 1/2 REG
300 350 (1320)
Weight: 990 lbs (450 kg)

SPEED : RPM
250 300 (1140)

Predicted Build Rates - Degrees/100ft (30m) 200 250 (950)


Bend Slick Single Two 200 (760)
150
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
50 gpm (lpm)
0.39 1.5 1.4 1.4 2.5 2.7 3.0 1.8 1.8 1.8
0.78 4.2 3.4 2.9 5.0 5.2 5.5 4.6 4.6 4.6 0
1.15 6.9 6.2 4.7 7.4 7.5 7.8 7.2 7.2 7.2
1.50 9.5 8.7 7.2 9.5 9.8 10.0 9.6 9.7 9.7 3500
4500
1.83 12.0 11.2 9.6 12.0 11.9 12.1 12.0 11.9 12.0 3000 4000
2.12 14.1 13.3 11.8 14.1 13.7 13.9 14.1 13.7 13.9

TORQUE : N.m
3500
TORQUE : lb-ft

2.38 16.1 15.2 13.6 16.1 15.2 15.6 16.1 15.4 15.6 2500
2.60 17.7 16.9 15.3 17.7 16.9 17.0 17.7 16.9 17.0 3000
2000
2.77 19.0 18.1 16.5 19.0 18.1 18.1 19.0 18.1 18.1 2500
1500
FULL LOAD
2.89 19.8 19.0 17.4 19.8 19.0 18.8 19.8 19.0 18.8 2000
2.97 20.4 19.6 18.0 20.4 19.6 19.3 20.4 19.6 19.3 1000 1500
3.00 20.7 19.8 18.2 20.7 19.8 19.5 20.7 19.8 19.5 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 160
Hole Size Hole Size Hole Size 140
OUTPUT POWER : HP

100

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
350 (1320)
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 2.89 3.00 120
80
3.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.60 3.00 100 300 (1140)
6.0 3.00 3.00 3.00 2.12 2.38 3.00 1.83 2.12 2.60
80 60
9.0 2.60 2.77 3.00 1.83 1.83 2.38 1.50 1.83 2.12 250 (950)
12.0 2.12 2.38 2.77 1.50 1.83 2.12 1.15 1.50 1.83 60
200 (760) 40
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15 40
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 gpm (lpm) 20
20
21.0 1.15 1.15 1.50 0.39 0.78 0.78 0.39 0.39 0.39
24.0 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78 0.00
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 0.00 approximately 150 psi (1030 kPa) @ 300 gpm (1140 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 124 11- 125
4 3/4'' 7/8 M/L 2.0 Stage (Air)
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 0.32 rev/gal 0.085 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 2,150 lb-ft 2913 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 22.5 ft (6.86 m)
0 500 1000 1500 2000 2500
D Maximum Diameter of Motor at Upset: 5.38 in kPa
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
90
Common Bottom Connection: 3 1/2 REG
80 250 (950)
Weight: 950 lbs (430 kg) 70

SPEED : RPM
60 200 (760)
Predicted Build Rates - Degrees/100ft (30m) 50
Bend Slick Single Two 150 (570)
40
Setting Stabilizer Stabilizers
30 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
20
0.39 1.5 1.5 1.4 2.5 2.7 3.0 1.8 1.8 1.8 10 gpm (lpm)
0.78 4.2 3.5 2.9 5.0 5.2 5.5 4.6 4.6 4.6 0
1.15 7.0 6.2 4.7 7.4 7.6 7.9 7.2 7.2 7.2
1.50 9.6 8.8 7.3 9.6 9.8 10.1 9.7 9.7 9.7 3500
4500
1.83 12.1 11.3 9.7 12.1 11.9 12.2 12.1 11.9 12.0 3000 4000
2.12 14.2 13.4 11.8 14.2 13.8 14.0 14.2 13.8 14.0

TORQUE : N.m
3500
TORQUE : lb-ft

2.38 16.2 15.3 13.7 16.2 15.3 15.7 16.2 15.5 15.7 2500
2.60 17.8 17.0 15.4 17.8 17.0 17.1 17.8 17.0 17.1 3000
2000
2.77 19.1 18.2 16.6 19.1 18.2 18.2 19.1 18.2 18.2 2500
2.89 20.0 19.1 17.5 20.0 19.1 18.9 20.0 19.1 18.9 1500 2000
FULL LOAD
2.97 20.6 19.7 18.1 20.6 19.7 19.4 20.6 19.7 19.4 1000 1500
3.00 20.8 20.0 18.3 20.8 20.0 19.6 20.8 20.0 19.6 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 45
Hole Size Hole Size Hole Size 40 30

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 250 (950)


35 25
0.0 3.00 3.00 3.00 2.89 3.00 3.00 2.77 2.89 3.00
30
3.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.38 3.00
200 (760) 20
6.0 3.00 3.00 3.00 2.12 2.38 3.00 1.83 2.12 2.60 25
9.0 2.60 2.77 3.00 1.83 1.83 2.38 1.50 1.83 2.12 20 15
12.0 2.12 2.38 2.77 1.50 1.83 2.12 1.15 1.50 1.83 150 (570)
15
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15 10
10 100 (380)
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 5
21.0 1.15 1.15 1.50 0.39 0.78 0.78 0.39 0.39 0.39 5
gpm (lpm)
24.0 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78 0.00
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 0.00 approximately 50 psi (340 kPa) @ 200 gpm (760 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 126 11- 127
4 3/4'' 7/8 M/L 2.0 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 0.32 rev/gal 0.085 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 940 lb-ft 1274 Nm
Maximum Weight on Bit 50,000 lbs 230 kN
Maximum Pull to Re-Run Motor 99,000 lbs 450 kN
A 1.8 ft (0.55 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 3.8 ft (1.16 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 20.8 ft (6.34 m)
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
180
Common Bottom Connection: 3 1/2 REG
250 (950)
160
140

SPEED : RPM
Weight: 880 lbs (400 kg) 200 (760)
120
Predicted Build Rates - Degrees/100ft (30m) 100 150 (570)
Bend Slick Single Two 80
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 60 100 (380)
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 40
0.35 1.5 1.5 1.5 2.7 2.9 3.4 1.8 1.8 1.8
0.69 3.1 3.0 3.4 5.4 5.6 6.0 4.8 4.8 4.8 20 gpm (lpm)
1.04 6.2 4.9 4.4 8.1 8.3 8.7 7.9 7.9 7.9 0
1.37 9.0 7.8 5.8 10.7 10.9 11.2 10.7 10.8 10.8
1.69 11.8 10.5 8.0 13.2 13.4 13.7 13.2 13.4 13.6 1500 2000
2.00 14.4 13.2 10.7 15.6 15.8 16.1 15.6 15.8 16.1
2.29 16.9 15.6 13.1 17.9 18.0 18.3 17.9 18.0 18.3 1250 1750
2.57 19.3 18.0 15.5 20.1 20.2 20.5 20.1 20.2 20.5

TORQUE : N.m
1500
TORQUE : lb-ft

2.83 21.6 20.3 17.7 22.1 22.2 22.5 22.1 22.2 22.5 1000
3.06 23.6 22.2 19.6 23.9 24.0 24.2 23.9 24.0 24.2 1250
3.28 25.5 24.1 21.5 25.5 25.7 25.9 25.5 25.7 25.9 750 1000
3.46 27.0 25.6 23.0 27.0 27.1 27.3 27.0 27.1 27.3
3.63 28.5 27.1 24.4 28.5 28.5 28.6 28.5 28.5 28.6 FULL LOAD 750
500
3.76 29.6 28.2 25.5 29.6 29.5 29.6 29.6 29.5 29.6
500
3.86 30.4 29.1 26.4 30.4 30.2 30.4 30.4 30.2 30.4
250
3.94 31.1 29.7 27.1 31.1 30.9 31.0 31.1 30.9 31.0 250
3.98 31.5 30.1 27.4 31.5 31.2 31.3 31.5 31.2 31.3
0 0
4.00 31.6 30.3 27.6 31.6 31.3 31.4 31.6 31.3 31.4

Maximum Adjustable Bend Setting 45


For Rotary Drilling - Degrees 30
40

OUTPUT POWER : kW
OUTPUT POWER : HP

Hole Slick Single Two 250 (950)


Curvature Stabilizer Stabilizer 35 25
Hole Size Hole Size Hole Size
30 200 (760)
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 20
0.0 3.46 3.63 4.00 2.83 2.83 3.06 2.57 2.57 2.57 25
3.5 3.06 3.28 3.76 2.57 2.57 2.57 2.29 2.29 2.29 20 150 (570) 15
7.0 2.57 2.83 3.28 2.00 2.00 2.29 2.00 2.00 2.00
10.5 2.29 2.57 2.83 1.69 1.69 1.69 1.37 1.37 1.37 15
10
14.0 2.00 2.00 2.57 1.37 1.37 1.37 1.04 1.04 1.04 10 100 (380)
17.5 1.69 1.69 2.29 0.69 1.04 1.04 0.69 0.69 0.69 5
21.0 1.04 1.37 1.69 0.35 0.35 0.69 0.35 0.35 0.35 5
gpm (lpm)
24.5 0.69 1.04 1.37 0.00 0.00 0.00 0.00 0.00 0.00 0 0
28.0 0.35 0.69 1.04
31.5 0.00 0.35 0.69
35.0 0.00 0.35 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 100 psi (690 kPa) @ 200 gpm (760 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 128 11- 129
4 3/4'' 7/8 M/L 2.2 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 0.56 rev/gal 0.148 rev/l
Pressure at Full Load 290 psi 2000 kPa
Torque at Full Load 1,340 lb-ft 1816 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 18.5 ft (5.64 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 50 100 150 200 250 300 350 400 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
150
Common Bottom Connection: 3 1/2 REG
250 (950)
125
Weight: 780 lbs (350 kg)

SPEED : RPM
100 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
75 150 (570)
Bend Slick Single Two
Setting Stabilizer Stabilizers
50 100 (380)
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 25
0.39 1.8 1.8 2.1 3.3 3.6 4.1 2.1 2.1 2.2 gpm (lpm)
0.78 5.5 4.5 3.6 6.3 6.6 7.1 5.5 5.5 5.5 0
1.15 9.0 8.0 6.1 9.0 9.4 9.9 8.7 8.7 8.7
1.50 12.2 11.2 9.3 12.2 12.1 12.5 12.1 11.7 11.7 2000
1.83 15.3 14.3 12.3 15.3 14.3 15.0 15.3 14.5 14.5 2500
2.12 18.0 17.0 15.0 18.0 17.0 17.2 18.0 17.0 17.0

TORQUE : N.m
1500 2000
TORQUE : lb-ft

2.38 20.5 19.4 17.3 20.5 19.4 19.2 20.5 19.4 19.2
2.60 22.5 21.4 19.4 22.5 21.4 20.9 22.5 21.4 20.9
1500
2.77 24.1 23.0 20.9 24.2 23.0 22.2 24.2 23.0 22.2 1000

FULL LOAD
2.89 25.2 24.1 22.0 25.4 24.1 23.1 25.4 24.1 23.1
1000
2.97 26.0 24.9 22.7 26.3 24.9 23.7 26.3 24.9 23.7
3.00 26.3 25.2 23.0 26.6 25.2 23.9 26.6 25.2 23.9 500
500

Maximum Adjustable Bend Setting 0 0


For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 40
Hole Size Hole Size Hole Size 35

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4


gpm (lpm) 25
0.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.38 2.77 30
20
3.5 2.89 3.00 3.00 2.12 2.38 3.00 1.83 2.12 2.77 25 250 (950)
7.0 2.60 2.77 3.00 1.83 2.12 2.77 1.50 1.83 2.38
20 200 (760) 15
10.5 2.12 2.38 2.89 1.50 1.83 2.38 1.15 1.50 1.83
14.0 1.83 2.12 2.38 1.15 1.50 1.83 0.78 1.15 1.50 15
150 (570) 10
17.5 1.50 1.83 2.12 0.78 1.50 1.50 0.78 1.15 1.15 10
21.0 1.15 1.50 1.83 0.78 1.15 1.15 0.39 0.78 0.78 100 (380) 5
5
24.5 0.78 1.15 1.50 0.39 0.39 0.78 0.39 0.39 0.39
28.0 0.39 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
31.5 0.00 0.39 0.78 0.00
35.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 150 psi (1030 kPa) @ 200 gpm (760 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 130 11- 131
4 3/4'' 7/8 M/L 2.2 Stage
4 Degree Adjustable Housing
Specifications based on series 20 motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 0.56 rev/gal 0.148 rev/l
Pressure at Full Load 290 psi 2000 kPa
Torque at Full Load 1,330 lb-ft 1802 Nm
Maximum Weight on Bit 50,000 lbs 230 kN
Maximum Pull to Re-Run Motor 99,000 lbs 450 kN
A 0.9 ft (0.27 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 3.8 ft (1.16 m)
C 15.2 ft (4.63 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 50 100 150 200 250 300 350 400 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
150
Common Bottom Connection: 3 1/2 REG
250 (950)
125
Weight: 640 lbs (290 kg)

SPEED : RPM
100 200 (760)
Predicted Build Rates - Degrees/100ft (30m)
75 150 (570)
Bend Slick Single Two
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 50 100 (380)
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
0.35 1.8 2.1 1.8 3.4 3.7 4.4 2.1 2.1 2.1 25 gpm (lpm)
0.69 3.9 3.5 4.2 6.5 6.8 7.4 5.6 5.6 5.6
1.04 7.4 6.0 5.2 9.7 9.9 10.5 9.2 9.2 9.2 0
1.37 10.8 9.3 6.8 12.6 12.9 13.4 12.6 12.7 12.7
1.69 14.1 12.6 9.6 15.5 15.8 16.3 15.5 15.8 16.0 2000
2.00 17.2 15.7 12.7 18.3 18.6 19.0 18.3 18.6 19.0 2500
2.29 20.2 18.6 15.6 21.0 21.2 21.6 21.0 21.2 21.6
2.57 23.0 21.4 18.4 23.0 23.7 24.1 23.5 23.7 24.1

TORQUE : N.m
1500 2000
TORQUE : lb-ft

2.83 25.7 24.1 21.0 25.7 26.0 26.4 25.7 26.0 26.4
3.06 28.0 26.4 23.3 28.0 28.1 28.4 28.0 28.1 28.4
3.28 30.3 28.6 25.5 30.3 30.1 30.4 30.3 30.1 30.4 1500
1000
3.46 32.1 30.4 27.3 32.1 31.7 31.9 32.1 31.7 31.9

FULL LOAD
3.63 33.8 32.2 28.9 33.8 33.2 33.5 33.8 33.2 33.5 1000
3.76 35.1 33.5 30.2 35.1 34.4 34.6 35.1 34.4 34.6
500
3.86 36.1 34.5 31.2 36.1 35.3 35.5 36.1 35.3 35.5 500
3.94 37.0 35.3 32.0 37.0 35.3 36.2 37.0 36.0 36.2
3.98 37.4 35.7 32.4 37.4 35.7 36.6 37.4 36.4 36.6
0 0
4.00 37.6 35.9 32.6 37.6 35.9 36.7 37.6 36.5 36.7

Maximum Adjustable Bend Setting 40


For Rotary Drilling - Degrees
35 gpm (lpm)

OUTPUT POWER : kW
OUTPUT POWER : HP

Hole Slick Single Two 25


Curvature Stabilizer Stabilizer 30
Hole Size Hole Size Hole Size 20
25 250 (950)
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
0.0 3.06 3.28 3.76 2.29 2.83 2.83 2.29 2.57 2.57
20 200 (760) 15
4.0 2.57 2.83 3.46 2.29 2.29 2.57 2.00 2.00 2.00
8.0 2.29 2.57 3.06 2.00 2.00 2.00 1.69 1.69 1.69 15
12.0 2.00 2.29 2.83 1.37 1.69 1.69 1.37 1.37 1.37 150 (570) 10
16.0 1.69 2.00 2.29 1.04 1.04 1.37 1.04 1.04 1.04 10
20.0 1.37 1.69 2.00 0.69 0.69 0.69 0.35 0.35 0.35 100 (380) 5
5
24.0 1.04 1.37 1.69 0.35 0.35 0.35 0.00 0.00 0.00
28.0 0.69 1.04 1.37 0.00 0.00 0.00 0 0
32.0 0.35 0.69 1.04
36.0 0.00 0.35 0.69
40.0 0.00 0.35 1. Total pressure loss through motor with no load is
44.0 0.00 approximately 140 psi (960 kPa) @ 200 gpm (760 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 132 11- 133
4 3/4'' 7/8 M/L 3.8 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 250 gpm 950 lpm
Revolutions per Unit Volume 0.56 rev/gal 0.148 rev/l
Pressure at Full Load 490 psi 3380 kPa
Torque at Full Load 2,430 lb-ft 3293 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2 ft (0.61 m) Pull to Yield Motor 331,000 lbs 1490 kN
B 5.4 ft (1.65 m)
C 23.9 ft (7.28 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.65 in (67 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
150
Common Bottom Connection: 3 1/2 REG 250 (950)
125
220 (830)
Weight: 1010 lbs (460 kg)

SPEED : RPM
100 190 (720)
Predicted Build Rates - Degrees/100ft (30m) 160 (610)
Bend Slick Single Two 75
Setting Stabilizer Stabilizers gpm (lpm)
50
Hole Size Hole Size Hole Size
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 25
0.39 1.4 1.4 1.4 2.5 2.6 2.9 1.8 1.8 1.8
0.78 4.1 3.4 2.8 4.9 5.1 5.4 4.5 4.5 4.5 0
1.15 6.8 6.1 4.6 7.3 7.4 7.7 7.1 7.1 7.1
1.50 9.4 8.6 7.1 9.4 9.6 9.9 9.5 9.5 9.5 3000 4000
1.83 11.8 11.0 9.5 11.8 11.7 12.0 11.8 11.7 11.8 3500
2500
2.12 13.9 13.1 11.6 13.9 13.6 13.8 13.9 13.6 13.8
TORQUE : lb-ft

3000

TORQUE : N.m
2.38 15.8 15.0 13.5 15.8 15.0 15.4 15.8 15.2 15.4 2000
2.60 17.5 16.6 15.1 17.5 16.6 16.8 17.5 16.6 16.8 2500
2.77 18.7 17.9 16.3 18.7 17.9 17.8 18.7 17.9 17.8 1500 2000
2.89 19.6 18.8 17.1 19.6 18.8 18.6 19.6 18.8 18.6

FULL LOAD
1500
2.97 20.2 19.3 17.7 20.2 19.3 19.1 20.2 19.3 19.1 1000
3.00 20.4 19.6 17.9 20.4 19.6 19.3 20.4 19.6 19.3 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 70
50
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
60
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
40
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 3.00 3.00 50 250 (950)
3.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.60 3.00
40 220 (830) 30
6.0 3.00 3.00 3.00 2.12 2.38 3.00 2.12 2.12 2.60
9.0 2.60 2.89 3.00 1.83 1.83 2.38 1.50 1.83 2.12 30 190 (720)
12.0 2.12 2.38 2.77 1.50 1.83 2.12 1.15 1.50 1.83 20
160 (610)
15.0 1.83 2.12 2.38 1.15 1.50 1.50 0.78 1.15 1.15 20
18.0 1.50 1.50 2.12 0.78 1.15 1.15 0.78 0.78 0.78 gpm (lpm) 10
10
21.0 1.15 1.15 1.50 0.39 0.78 0.78 0.39 0.39 0.39
24.0 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 0 0
27.0 0.39 0.39 0.78
30.0 0.00 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 210 psi (1450 kPa) @ 220 gpm (830 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 134 11- 135
5'' 6/7 M/L 6.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 350 gpm 1320 lpm
Revolutions per Unit Volume 0.86 rev/gal 0.227 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 2,250 lb-ft 3049 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2.1 ft (0.64 m) Pull to Yield Motor 400,000 lbs 1800 kN
B 5.4 ft (1.65 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 24.92 ft (7.6 m)
D Maximum Diameter of Motor at Upset: 5.38 in 0 1000 2000 3000 4000 5000 6000 kPa
(137 mm)
E Radius of Offset Pad: 2.78 in (71 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
350
Common Bottom Connection: 3 1/2 REG
300 350 (1320)
Weight: 1160 lbs (530 kg)

SPEED : RPM
250 300 (1140)

Predicted Build Rates - Degrees/100ft (30m) 200 250 (950)


Bend Slick Single Two 200 (760)
150
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 gpm (lpm)
50
0.39 2.0 1.4 1.6 2.2 2.4 2.7 1.8 1.8 1.8
0.78 4.7 4.0 2.7 4.7 4.8 5.1 4.5 4.4 4.4 0
1.15 7.4 6.6 5.2 7.4 7.1 7.3 7.4 6.9 6.9
1.50 9.9 9.1 7.6 9.9 9.1 9.5 9.9 9.2 9.3 3000 4000
1.83 12.2 11.5 10.0 12.2 11.5 11.5 12.2 11.5 11.5
2500 3500
2.12 14.3 13.5 12.0 14.3 13.5 13.3 14.3 13.5 13.3
3000

TORQUE : N.m
TORQUE : lb-ft

2.38 16.2 15.4 13.8 16.2 15.4 14.9 16.2 15.4 14.9
2000
2.60 17.7 16.9 15.4 17.7 16.9 16.2 17.7 16.9 16.2 2500
2.77 18.9 18.1 16.6 19.1 18.1 17.2 19.1 18.1 17.2
1500 2000
2.89 19.8 19.0 17.4 20.0 19.0 18.0 20.0 19.0 18.0

FULL LOAD
2.97 20.4 19.5 18.0 20.6 19.5 18.5 20.6 19.5 18.5 1500
1000
3.00 20.6 19.8 18.2 20.9 19.8 18.7 20.9 19.8 18.7 1000
500
500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 160
Hole Size Hole Size Hole Size 140

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4 100


0.0 3.00 3.00 3.00 2.12 2.38 2.89 2.12 2.12 2.60 120
350 (1320) 80
2.5 2.60 2.77 3.00 1.83 2.12 2.60 1.83 1.83 2.38 100
5.0 2.38 2.38 2.77 1.50 1.83 2.38 1.50 1.50 2.12 300 (1140)
80 60
7.5 1.83 2.12 2.38 1.15 1.50 1.83 1.15 1.15 1.50
60 250 (950)
10.0 1.50 1.83 2.12 0.78 1.15 1.50 0.78 0.78 1.15 40
12.5 1.15 1.50 1.83 0.78 0.78 1.15 0.39 0.78 0.78 40 200 (760)
15.0 0.78 1.15 1.50 0.39 0.78 0.78 0.00 0.39 0.39 20
20
17.5 0.78 0.78 1.15 0.00 0.39 0.39 0.00 0.00 0.00 gpm (lpm)
20.0 0.39 0.39 0.78 0.00 0.00 0.00 0 0
22.5 0.00 0.00 0.39
25.0 0.00 0.00 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 205 psi (1410 kPa) @ 300 gpm (1140 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 136 11- 137
5'' 6/7 M/L 7.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 350 gpm 1320 lpm
Revolutions per Unit Volume 0.86 rev/gal 0.227 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 2,620 lb-ft 3550 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2.1 ft (0.64 m) Pull to Yield Motor 400,000 lbs 1800 kN
B 5.4 ft (1.65 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 27.3 ft (8.32 m) 0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 5.38 in
(137 mm)
E Radius of Offset Pad: 2.78 in (71 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
350
Common Bottom Connection: 3 1/2 REG
300 350 (1320)
Weight: 1270 lbs (580 kg)

SPEED : RPM
250 300 (1140)

Predicted Build Rates - Degrees/100ft (30m) 200 250 (950)


Bend Slick Single Two 200 (760)
150
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
50 gpm (lpm)
0.39 1.8 1.3 1.4 2.0 2.2 2.4 1.7 1.7 1.7
0.78 4.4 3.7 2.5 4.4 4.4 4.7 4.2 4.1 4.1 0
1.15 6.8 6.1 4.8 6.8 6.6 6.8 6.8 6.5 6.5
1.50 9.1 8.4 7.1 9.1 8.6 8.8 9.1 8.6 8.7 3500
4500
1.83 11.3 10.6 9.2 11.3 10.6 10.7 11.3 10.6 10.7 3000 4000
2.12 13.2 12.5 11.1 13.2 12.5 12.4 13.2 12.5 12.4

TORQUE : N.m
3500
TORQUE : lb-ft

2.38 14.9 14.2 12.8 14.9 14.2 13.9 14.9 14.2 13.9 2500
2.60 16.4 15.6 14.2 16.4 15.6 15.1 16.4 15.6 15.1 3000
2000
2.77 17.5 16.8 15.3 17.5 16.8 16.1 17.5 16.8 16.1 2500
2.89 18.3 17.5 16.1 18.3 17.5 16.8 18.3 17.5 16.8 1500 2000

FULL LOAD
2.97 18.8 18.1 16.6 18.9 18.1 17.2 18.9 18.1 17.2 1000 1500
3.00 19.0 18.3 16.8 19.1 18.3 17.4 19.1 18.3 17.4 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 180
Hole Size Hole Size Hole Size 160 120
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
140 100
0.0 3.00 3.00 3.00 2.38 2.60 3.00 2.12 2.38 2.89 350 (1320)
120
2.5 2.77 3.00 3.00 2.12 2.12 2.77 1.83 2.12 2.60
300 (1140) 80
5.0 2.38 2.60 3.00 1.50 1.83 2.38 1.50 1.50 2.12 100
7.5 2.12 2.12 2.60 1.15 1.50 1.83 1.15 1.15 1.83 80 250 (950) 60
10.0 1.50 1.83 2.12 0.78 1.15 1.50 0.78 0.78 1.15 60 200 (760) 40
12.5 1.15 1.50 1.83 0.39 0.78 1.15 0.39 0.78 0.78
40
15.0 0.78 1.15 1.50 0.39 0.78 0.78 0.00 0.39 0.39 20
17.5 0.78 0.78 1.15 0.00 0.00 0.39 0.00 0.00 0.00 20 gpm (lpm)
20.0 0.39 0.39 0.78 0.00 0 0
22.5 0.00 0.00 0.39
25.0 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 205 psi (1410 kPa) @ 300 gpm (1140 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 138 11- 139
5'' 6/7 M/L 8.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 350 gpm 1320 lpm
Revolutions per Unit Volume 0.86 rev/gal 0.227 rev/l
Pressure at Full Load 1,040 psi 7170 kPa
Torque at Full Load 3,000 lb-ft 4065 Nm
Maximum Weight on Bit 69,000 lbs 310 kN
Maximum Pull to Re-Run Motor 144,000 lbs 650 kN
A 2.1 ft (0.64 m) Pull to Yield Motor 400,000 lbs 1800 kN
B 5.4 ft (1.65 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 30.4 ft (9.27 m)
D Maximum Diameter of Motor at Upset: 5.38 in 0 2000 4000 6000 8000 kPa
(137 mm)
E Radius of Offset Pad: 2.78 in (71 mm) 0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 3 1/2 IF 3 1/2 REG
350
Common Bottom Connection: 3 1/2 REG
300 350 (1320)
Weight: 1420 lbs (640 kg)

SPEED : RPM
250 300 (1140)

Predicted Build Rates - Degrees/100ft (30m) 200 250 (950)


Bend Slick Single Two 200 (760)
150
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
50 gpm (lpm)
0.39 1.6 1.2 1.3 1.8 1.9 2.1 1.5 1.5 1.5
0.78 3.9 3.3 2.3 3.9 4.0 4.2 3.8 3.8 3.8 0
1.15 6.1 5.5 4.3 6.1 6.0 6.2 6.1 5.9 5.9
1.50 8.2 7.6 6.4 8.2 7.8 8.0 8.2 7.8 7.9 4500 6000
1.83 10.2 9.5 8.3 10.2 9.5 9.7 10.2 9.6 9.7 4000
2.12 11.9 11.3 10.0 11.9 11.3 11.3 11.9 11.3 11.3 5000
3500

TORQUE : N.m
TORQUE : lb-ft

2.38 13.5 12.8 11.5 13.5 12.8 12.6 13.5 12.8 12.6 3000 4000
2.60 14.8 14.1 12.8 14.8 14.1 13.8 14.8 14.1 13.8
2500
2.77 15.8 15.1 13.8 15.8 15.1 14.7 15.8 15.1 14.7 3000
2.89 16.5 15.8 14.6 16.5 15.8 15.3 16.5 15.8 15.3 2000

FULL LOAD
2.97 17.0 16.3 15.0 17.0 16.3 15.8 17.0 16.3 15.8 1500 2000
3.00 17.2 16.5 15.2 17.2 16.5 15.9 17.2 16.5 15.9 1000
1000
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 200
Hole Size Hole Size Hole Size 175
OUTPUT POWER : HP

125

OUTPUT POWER : kW
Deg/100ft 6 6 1/4 6 3/4 6 6 1/4 6 3/4 6 6 1/4 6 3/4
0.0 3.00 3.00 3.00 2.60 2.77 3.00 2.38 2.60 3.00 150
350 (1320)
100
2.5 3.00 3.00 3.00 2.12 2.38 2.89 2.12 2.12 2.60 125
300 (1140)
5.0 2.60 2.77 3.00 1.83 1.83 2.38 1.50 1.83 2.12
100 75
7.5 2.12 2.38 2.60 1.50 1.50 1.83 1.15 1.50 1.83 250 (950)
10.0 1.83 1.83 2.12 0.78 1.15 1.50 0.78 1.15 1.15 75 200 (760) 50
12.5 1.50 1.50 1.83 0.39 0.78 1.15 0.39 0.78 0.78 50
15.0 1.15 1.15 1.50 0.00 0.39 0.39 0.00 0.39 0.39 25
25 gpm (lpm)
17.5 0.39 0.78 1.15 0.00 0.00 0.00 0.00 0.00 0.00
20.0 0.39 0.39 0.78 0 0
22.5 0.00 0.00 0.39
25.0 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 205 psi (1410 kPa) @ 300 gpm (1140 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 140 11- 141
6 1/4'' 1/2 H/S 4.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 350 gpm 1320 lpm
Revolutions per Unit Volume 1.31 rev/gal 0.346 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 1,160 lb-ft 1572 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 22.9 ft (6.98 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 200 400 600 800 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
500
Common Bottom Connection: 4 1/2 REG
450 350 (1320)
400
Weight: 1670 lbs (760 kg) 290 (1100)

SPEED : RPM
350
Predicted Build Rates - Degrees/100ft (30m) 300 230 (870)
Bend Slick Single Two 250
200 170 (640)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 150
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 100 gpm (lpm)
0.39 1.4 1.7 1.4 2.8 3.2 3.3 1.9 1.9 1.9 50
0.78 3.8 2.8 2.8 5.1 5.5 5.6 4.5 4.5 4.5 0
1.15 6.5 5.0 4.4 7.4 7.7 7.8 7.0 7.0 7.0
1.50 9.1 7.5 6.9 9.5 9.8 9.9 9.4 9.4 9.4 1800
1.83 11.5 9.9 9.2 11.5 11.8 11.9 11.5 11.6 11.6 1600
2.12 13.6 12.0 11.3 13.6 13.5 13.6 13.6 13.5 13.6 2000
1400

TORQUE : N.m
TORQUE : lb-ft

2.38 15.5 13.8 13.2 15.5 15.1 15.2 15.5 15.1 15.2 1200
2.60 17.1 15.4 14.7 17.1 16.4 16.5 17.1 16.4 16.5 1500
1000
2.77 18.3 16.6 16.0 18.3 17.4 17.5 18.3 17.4 17.5
800
FULL LOAD
2.89 19.2 17.5 16.8 19.2 18.1 18.2 19.2 18.1 18.2 1000
2.97 19.8 18.0 17.4 19.8 18.0 18.7 19.8 18.6 18.7 600
3.00 20.0 18.3 17.6 20.0 18.3 18.9 20.0 18.8 18.9 400 500
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 100
70
Hole Size Hole Size Hole Size 90
350 (1320)
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 80 60
0.0 3.00 3.00 3.00 2.38 3.00 3.00 2.12 2.60 2.60 70 50
3.0 2.60 3.00 3.00 2.12 2.38 2.60 1.83 2.12 2.12 290 (1100)
60
6.0 2.38 2.77 2.89 1.50 2.12 2.12 1.50 1.50 1.50 40
50
9.0 1.83 2.38 2.38 1.15 1.50 1.50 1.15 1.15 1.15 230 (870)
40 30
12.0 1.50 1.83 2.12 1.15 1.15 1.15 0.78 0.78 0.78
15.0 1.15 1.50 1.83 0.39 0.78 0.78 0.39 0.39 0.39 30 20
20 170 (640)
18.0 0.78 1.15 1.50 0.00 0.00 0.00 0.00 0.00 0.00
10
21.0 0.39 0.78 1.15 10 gpm (lpm)
24.0 0.00 0.39 0.78 0 0
27.0 0.00 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 80 psi (550 kPa) @ 290 gpm (1100 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 142 11- 143
6 1/4'' 4/5 M/L 4.3 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.68 rev/gal 0.180 rev/l
Pressure at Full Load 560 psi 3860 kPa
Torque at Full Load 2,370 lb-ft 3211 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 20 ft (6.1 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
D Maximum Diameter of Motor at Upset: 7.12 in 0 1000 2000 3000 4000 5000 kPa
(181 mm)
0 200 400 600 800 psi
E Radius of Offset Pad: 3.44 in (87 mm)
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
300
Common Bottom Connection: 4 1/2 REG
250 400 (1510)
Weight: 1460 lbs (660 kg)

SPEED : RPM
200 320 (1210)
Predicted Build Rates - Degrees/100ft (30m)
150 240 (910)
Bend Slick Single Two
Setting Stabilizer Stabilizers
100 160 (610)
Hole Size Hole Size Hole Size
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 50
0.39 1.6 1.9 1.9 3.2 3.7 3.9 2.0 2.0 2.0 gpm (lpm)
0.78 4.4 3.1 3.1 5.7 6.2 6.4 4.9 4.9 4.9 0
1.15 7.4 5.7 5.0 8.2 8.6 8.8 7.6 7.6 7.6
1.50 10.3 8.5 7.8 10.3 10.9 11.1 10.2 10.2 10.2 3500
4500
1.83 12.9 11.1 10.4 12.9 13.0 13.2 12.9 12.6 12.6 3000 4000
2.12 15.3 13.4 12.7 15.3 14.9 15.1 15.3 14.8 14.8
TORQUE : lb-ft

TORQUE : N.m
2500 3500
2.38 17.4 15.5 14.8 17.4 16.6 16.8 17.4 16.6 16.7
2.60 19.2 17.3 16.5 19.2 18.0 18.2 19.2 18.0 18.2 3000
2000
2.77 20.6 18.6 17.9 20.6 18.6 19.3 20.6 19.2 19.3 2500

FULL LOAD
2.89 21.5 19.6 18.9 21.7 19.6 20.1 21.7 19.9 20.1 1500 2000
2.97 22.2 20.2 19.5 22.4 20.2 20.6 22.4 20.5 20.6 1000 1500
3.00 22.4 20.5 19.7 22.7 20.5 20.8 22.7 20.6 20.8 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 140
100
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

120 gpm (lpm)


Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 400 (1510)
80
0.0 2.89 3.00 3.00 2.38 2.77 2.89 2.12 2.38 2.38 100
3.0 2.60 3.00 3.00 1.83 2.38 2.38 1.83 1.83 1.83 320 (1210)
80 60
6.0 2.12 2.77 2.89 1.50 1.83 1.83 1.50 1.50 1.50
9.0 1.83 2.38 2.60 1.15 1.50 1.50 1.15 1.15 1.15 60
12.0 1.50 2.12 2.12 1.15 1.15 1.15 0.78 0.78 0.78 240 (910) 40
15.0 1.15 1.83 1.83 0.39 0.78 0.78 0.39 0.39 0.39 40
18.0 0.78 1.50 1.50 0.00 0.39 0.39 0.00 0.00 0.00 160 (610) 20
20
21.0 0.78 1.15 1.15 0.00 0.00
24.0 0.39 0.78 0.78 0 0
27.0 0.00 0.39 0.39
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 120 psi (830 kPa) @ 320 gpm (1210 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 144 11- 145
6 1/4'' 4/5 M/L 7.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.68 rev/gal 0.180 rev/l
Pressure at Full Load 980 psi 6750 kPa
Torque at Full Load 4,170 lb-ft 5650 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 26.6 ft (8.11 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 200 400 600 800 1000 1200 1400 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
300
Common Bottom Connection: 4 1/2 REG
400 (1510)
250
Weight: 1940 lbs (880 kg)

SPEED : RPM
200 320 (1210)
Predicted Build Rates - Degrees/100ft (30m)
150 240 (910)
Bend Slick Single Two
Setting Stabilizer Stabilizers
100 160 (610)
Hole Size Hole Size Hole Size
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 50
0.39 1.3 1.4 1.2 2.4 2.7 2.8 1.7 1.7 1.7 gpm (lpm)
0.78 3.3 2.5 2.5 4.5 4.8 4.9 4.1 4.1 4.1 0
1.15 5.7 4.3 3.8 6.5 6.8 6.9 6.3 6.3 6.3
1.50 7.9 6.6 6.0 8.4 8.7 8.8 8.4 8.4 8.4 6500
6000 8000
1.83 10.0 8.6 8.1 10.0 10.5 10.6 10.2 10.4 10.4
5500
2.12 11.9 10.5 9.9 11.9 12.0 12.1 11.9 12.0 12.1 5000 7000

TORQUE : N.m
TORQUE : lb-ft

2.38 13.6 12.1 11.6 13.6 13.4 13.5 13.6 13.4 13.5 4500 6000
2.60 15.0 13.5 12.9 15.0 14.6 14.7 15.0 14.6 14.7 4000
3500 5000
2.77 16.1 14.6 14.0 16.1 15.6 15.6 16.1 15.6 15.6
2.89 16.8 15.3 14.8 16.8 16.2 16.3 16.8 16.2 16.3 3000 4000

FULL LOAD
2500
2.97 17.3 15.9 15.3 17.3 16.6 16.7 17.3 16.6 16.7 3000
2000
3.00 17.5 16.0 15.5 17.5 16.8 16.9 17.5 16.8 16.9 1500 2000
1000
1000
Maximum Adjustable Bend Setting 500
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 240
Hole Size Hole Size Hole Size 160

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 200 gpm (lpm)
0.0 3.00 3.00 3.00 2.60 3.00 3.00 2.38 2.89 3.00
160 400 (1510) 120
2.5 3.00 3.00 3.00 2.12 2.77 2.77 2.12 2.38 2.38
5.0 2.60 3.00 3.00 1.83 2.38 2.38 1.50 2.12 2.12
120 320 (1210)
7.5 2.12 2.60 2.77 1.50 1.83 1.83 1.15 1.50 1.50 80
10.0 1.83 2.12 2.38 1.15 1.50 1.50 1.15 1.15 1.15 80 240 (910)
12.5 1.50 1.83 2.12 0.78 1.15 1.15 0.78 0.78 0.78
40
15.0 1.15 1.50 1.50 0.39 0.39 0.78 0.39 0.39 0.39 40 160 (610)
17.5 0.78 1.15 1.15 0.00 0.00 0.00 0.00 0.00 0.00
20.0 0.39 0.78 0.78 0 0
22.5 0.00 0.39 0.39
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 170 psi (1170 kPa) @ 320 gpm (1210 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 146 11- 147
6 1/4'' 5/6 M/L 5.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.73 rev/gal 0.193 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 2,820 lb-ft 3821 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 19.9 ft (6.07 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H90
300
Common Bottom Connection: 4 1/2 REG 400 (1510)
250
340 (1290)
Weight: 1450 lbs (660 kg)

SPEED : RPM
200 280 (1060)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 150 220 (830)
Setting Stabilizer Stabilizers
100
Hole Size Hole Size Hole Size gpm (lpm)
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 50
0.39 1.6 1.9 1.9 3.2 3.7 3.9 2.0 2.0 2.0
0.78 4.4 3.1 3.1 5.7 6.2 6.4 4.9 4.9 4.9 0
1.15 7.4 5.7 5.0 8.2 8.6 8.8 7.6 7.6 7.6
1.50 10.3 8.5 7.8 10.3 10.9 11.1 10.2 10.2 10.2 4500 6000
1.83 13.0 11.1 10.4 13.0 13.0 13.2 13.0 12.7 12.6 4000
2.12 15.3 13.5 12.7 15.3 14.9 15.1 15.3 14.8 14.8 5000
3500

TORQUE : N.m
TORQUE : lb-ft

2.38 17.4 15.5 14.8 17.4 16.6 16.8 17.4 16.6 16.7 3000 4000
2.60 19.2 17.3 16.6 19.2 18.1 18.2 19.2 18.1 18.2
2500
2.77 20.6 18.7 17.9 20.6 18.7 19.3 20.6 19.2 19.3 3000
2.89 21.6 19.6 18.9 21.7 19.6 20.1 21.7 19.9 20.1 2000

FULL LOAD
2.97 22.2 20.3 19.5 22.5 20.3 20.6 22.5 20.5 20.6 1500 2000
3.00 22.5 20.5 19.7 22.7 20.5 20.8 22.7 20.7 20.8 1000
1000
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 220 160
Hole Size Hole Size Hole Size 200
OUTPUT POWER : HP

140

OUTPUT POWER : kW
Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 180 400 (1510)
0.0 2.89 3.00 3.00 2.38 2.77 2.89 2.12 2.38 2.38 160 120
3.0 2.60 3.00 3.00 1.83 2.38 2.38 1.83 1.83 1.83 140 340 (1290)
100
6.0 2.12 2.77 2.89 1.50 1.83 1.83 1.50 1.50 1.50 120
280 (1060) 80
9.0 1.83 2.38 2.60 1.15 1.50 1.50 1.15 1.15 1.15 100
12.0 1.50 2.12 2.12 1.15 1.15 1.15 0.78 0.78 0.78 80 220 (830) 60
15.0 1.15 1.83 1.83 0.39 0.78 0.78 0.39 0.39 0.39 60 40
18.0 0.78 1.50 1.50 0.00 0.39 0.39 0.00 0.00 0.00 40
20 20
21.0 0.78 1.15 1.15 0.00 0.00 gpm (lpm)
24.0 0.39 0.78 0.78 0 0
27.0 0.00 0.39 0.39
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 140 psi (960 kPa) @ 340 gpm (1290 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 148 11- 149
6 1/4'' 5/6 M/L 5.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 500 gpm 1890 lpm
Revolutions per Unit Volume 0.46 rev/gal 0.122 rev/l
Pressure at Full Load 715 psi 4930 kPa
Torque at Full Load 4,170 lb-ft 5650 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 26.6 ft (8.11 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H90
250
Common Bottom Connection: 4 1/2 REG 500 (1890)
200
Weight: 1940 lbs (880 kg)

SPEED : RPM
400 (1510)

Predicted Build Rates - Degrees/100ft (30m) 150


300 (1140)
Bend Slick Single Two
Setting Stabilizer Stabilizers 100
200 (760)
Hole Size Hole Size Hole Size
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 50
0.39 1.3 1.4 1.2 2.4 2.7 2.8 1.7 1.7 1.7 gpm (lpm)
0.78 3.3 2.5 2.5 4.5 4.8 4.9 4.1 4.1 4.1 0
1.15 5.7 4.3 3.8 6.5 6.8 6.9 6.3 6.3 6.3
1.50 7.9 6.6 6.0 8.4 8.7 8.8 8.4 8.4 8.4 6000 8000
1.83 10.0 8.6 8.1 10.0 10.5 10.6 10.2 10.5 10.4 7000
5000
2.12 11.9 10.5 9.9 11.9 12.0 12.1 11.9 12.0 12.1

TORQUE : N.m
TORQUE : lb-ft

6000
2.38 13.6 12.1 11.6 13.6 13.5 13.5 13.6 13.5 13.5 4000
2.60 15.0 13.5 13.0 15.0 14.6 14.7 15.0 14.6 14.7 5000
2.77 16.1 14.6 14.0 16.1 15.6 15.6 16.1 15.6 15.6 3000 4000
2.89 16.8 15.4 14.8 16.8 16.2 16.3 16.8 16.2 16.3

FULL LOAD
3000
2.97 17.3 15.9 15.3 17.3 16.7 16.7 17.3 16.7 16.7 2000
3.00 17.5 16.1 15.5 17.5 16.8 16.9 17.5 16.8 16.9 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 200 500 (1890) 150
0.0 3.00 3.00 3.00 2.60 3.00 3.00 2.38 2.89 3.00
125
2.5 3.00 3.00 3.00 2.12 2.77 2.77 2.12 2.38 2.38 150 400 (1510)
5.0 2.60 3.00 3.00 1.83 2.38 2.38 1.50 2.12 2.12 100
7.5 2.12 2.60 2.77 1.50 1.83 1.83 1.15 1.50 1.50 300 (1140)
100 75
10.0 1.83 2.12 2.38 1.15 1.50 1.50 1.15 1.15 1.15
12.5 1.50 1.83 2.12 0.78 1.15 1.15 0.78 0.78 0.78 200 (760) 50
15.0 1.15 1.50 1.50 0.39 0.39 0.78 0.39 0.39 0.39 50
25
17.5 0.78 1.15 1.15 0.00 0.00 0.00 0.00 0.00 0.00 gpm (lpm)
20.0 0.39 0.78 0.78 0 0
22.5 0.00 0.39 0.39
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 210 psi (1450 kPa) @ 400 gpm (1510 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 150 11- 151
6 1/4'' 7/8 M/L 2.8 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.34 rev/gal 0.090 rev/l
Pressure at Full Load 360 psi 2480 kPa
Torque at Full Load 2,770 lb-ft 3753 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 20 ft (6.1 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
psi
E Radius of Offset Pad: 3.44 in (87 mm) 0 100 200 300 400 500 600
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
140
Common Bottom Connection: 4 1/2 REG
400 (1510)
120
Weight: 1460 lbs (660 kg) 340 (1290)

SPEED : RPM
100
280 (1060)
Predicted Build Rates - Degrees/100ft (30m) 80
Bend Slick Single Two 220 (830)
60
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 40
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 gpm (lpm)
20
0.39 1.6 1.9 1.9 3.2 3.7 3.9 2.0 2.0 2.0
0.78 4.4 3.1 3.1 5.7 6.2 6.4 4.9 4.9 4.9 0
1.15 7.4 5.7 5.0 8.2 8.6 8.8 7.6 7.6 7.6
1.50 10.3 8.5 7.8 10.3 10.9 11.1 10.2 10.2 10.2 4500 6000
1.83 12.9 11.1 10.4 12.9 13.0 13.2 12.9 12.6 12.6 4000
2.12 15.3 13.4 12.7 15.3 14.9 15.1 15.3 14.8 14.8 5000
3500

TORQUE : N.m
TORQUE : lb-ft

2.38 17.4 15.5 14.8 17.4 16.6 16.8 17.4 16.6 16.7 3000 4000
2.60 19.2 17.3 16.5 19.2 18.0 18.2 19.2 18.0 18.2
2500
2.77 20.6 18.6 17.9 20.6 18.6 19.3 20.6 19.2 19.3 3000
2.89 21.5 19.6 18.9 21.7 19.6 20.1 21.7 19.9 20.1 2000
FULL LOAD
2.97 22.2 20.2 19.5 22.4 20.2 20.6 22.4 20.5 20.6 1500 2000
3.00 22.4 20.5 19.7 22.7 20.5 20.8 22.7 20.6 20.8 1000
1000
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 90
Hole Size Hole Size Hole Size 80 60

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 400 (1510)
70 50
0.0 2.89 3.00 3.00 2.38 2.77 2.89 2.12 2.38 2.38
60 340 (1290)
3.0 2.60 3.00 3.00 1.83 2.38 2.38 1.83 1.83 1.83
40
6.0 2.12 2.77 2.89 1.50 1.83 1.83 1.50 1.50 1.50 50
280 (1060)
9.0 1.83 2.38 2.60 1.15 1.50 1.50 1.15 1.15 1.15 40 30
12.0 1.50 2.12 2.12 1.15 1.15 1.15 0.78 0.78 0.78 30 220 (830) 20
15.0 1.15 1.83 1.83 0.39 0.78 0.78 0.39 0.39 0.39
20
18.0 0.78 1.50 1.50 0.00 0.39 0.39 0.00 0.00 0.00 10
10 gpm (lpm)
21.0 0.78 1.15 1.15 0.00 0.00
24.0 0.39 0.78 0.78 0 0
27.0 0.00 0.39 0.39
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 110 psi (760 kPa) @ 340 gpm (1290 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 152 11- 153
6 1/4'' 7/8 M/L 2.9 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 500 gpm 1890 lpm
Revolutions per Unit Volume 0.17 rev/gal 0.045 rev/l
Pressure at Full Load 380 psi 2620 kPa
Torque at Full Load 5,590 lb-ft 7574 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 28 ft (8.53 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
90
Common Bottom Connection: 4 1/2 REG
500 (1890)
80

Weight: 2040 lbs (930 kg) 70

SPEED : RPM
400 (1510)
60
Predicted Build Rates - Degrees/100ft (30m) 50
300 (1140)
Bend Slick Single Two 40
Setting Stabilizer Stabilizers 200 (760)
30
Hole Size Hole Size Hole Size
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4
20
0.39 1.2 1.4 1.2 2.2 2.5 2.6 1.6 1.6 1.6 10 gpm (lpm)
0.78 3.2 2.4 2.4 4.3 4.6 4.7 3.9 3.9 3.9 0
1.15 5.4 4.1 3.6 6.2 6.5 6.6 6.1 6.1 6.1
1.50 7.6 6.3 5.7 8.1 8.3 8.4 8.1 8.1 8.1 10000
1.83 9.6 8.3 7.7 9.8 10.1 10.1 9.8 10.1 10.1 9000 12000
2.12 11.4 10.0 9.5 11.4 11.6 11.6 11.4 11.6 11.6 8000
TORQUE : lb-ft

TORQUE : N.m
2.38 13.0 11.6 11.1 13.0 12.9 13.0 13.0 12.9 13.0 10000
7000
2.60 14.3 12.9 12.4 14.3 14.1 14.1 14.3 14.1 14.1 6000 8000
2.77 15.3 14.0 13.4 15.3 15.0 15.0 15.3 15.0 15.0
5000
2.89 16.1 14.7 14.1 16.1 15.6 15.7 16.1 15.6 15.7 6000
4000

FULL LOAD
2.97 16.6 15.2 14.6 16.6 16.0 16.1 16.6 16.0 16.1
3.00 16.8 15.3 14.8 16.8 16.2 16.2 16.8 16.2 16.2 3000 4000
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 90
OUTPUT POWER : HP

Hole Size Hole Size Hole Size 80 500 (1890) 60

OUTPUT POWER : kW
Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4
70 50
0.0 3.00 3.00 3.00 2.60 3.00 3.00 2.38 3.00 3.00 400 (1510)
60
2.5 3.00 3.00 3.00 2.12 2.89 2.89 2.12 2.60 2.60
40
5.0 2.60 3.00 3.00 1.83 2.38 2.38 1.83 2.12 2.12 50
7.5 2.12 2.60 2.77 1.50 1.83 1.83 1.15 1.50 1.50 40 300 (1140) 30
10.0 1.83 2.12 2.38 1.50 1.50 1.50 1.15 1.15 1.15 30
12.5 1.50 1.83 2.12 1.15 1.15 1.15 0.78 0.78 0.78 20
20 200 (760)
15.0 1.15 1.50 1.50 0.39 0.39 0.78 0.39 0.39 0.39 10
17.5 0.78 1.15 1.15 0.00 0.00 0.00 0.00 0.00 0.00 10 gpm (lpm)
20.0 0.39 0.78 0.78 0 0
22.5 0.00 0.39 0.39
25.0 0.00 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 120 psi (830 kPa) @ 400 gpm (1510 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 154 11- 155
6 1/4'' 7/8 M/L 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.39 rev/gal 0.104 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 3,120 lb-ft 4228 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 20 ft (6.1 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
D Maximum Diameter of Motor at Upset: 7.12 in 0 500 1000 1500 2000 2500 3000 3500 4000 kPa
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
160
Common Bottom Connection: 4 1/2 REG 400 (1510)
140
Weight: 1460 lbs (660 kg) 120 340 (1290)

SPEED : RPM
100 280 (1060)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 80
220 (830)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40 gpm (lpm)
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4
0.39 1.6 1.9 1.9 3.2 3.7 3.9 2.0 2.0 2.0 20
0.78 4.4 3.1 3.1 5.7 6.2 6.4 4.9 4.9 4.9 0
1.15 7.4 5.7 5.0 8.2 8.6 8.8 7.6 7.6 7.6
1.50 10.3 8.5 7.8 10.3 10.9 11.1 10.2 10.2 10.2 5000
1.83 13.0 11.1 10.4 13.0 13.0 13.2 13.0 12.7 12.6 4500 6000
2.12 15.3 13.5 12.7 15.3 14.9 15.1 15.3 14.8 14.8 4000
5000

TORQUE : N.m
TORQUE : lb-ft

2.38 17.4 15.5 14.8 17.4 16.6 16.8 17.4 16.6 16.7 3500
2.60 19.2 17.3 16.6 19.2 18.1 18.2 19.2 18.1 18.2 3000 4000
2.77 20.6 18.7 17.9 20.6 18.7 19.3 20.6 19.2 19.3 2500
3000
FULL LOAD
2.89 21.6 19.6 18.9 21.7 19.6 20.1 21.7 19.9 20.1 2000
2.97 22.2 20.3 19.5 22.5 20.3 20.6 22.5 20.5 20.6 1500 2000
3.00 22.5 20.5 19.7 22.7 20.5 20.8 22.7 20.7 20.8 1000
1000
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 120
Hole Size Hole Size Hole Size 110 80
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 100 400 (1510) 70
0.0 2.89 3.00 3.00 2.38 2.77 2.89 2.12 2.38 2.38 90
80 340 (1290) 60
3.0 2.60 3.00 3.00 1.83 2.38 2.38 1.83 1.83 1.83
70 50
6.0 2.12 2.77 2.89 1.50 1.83 1.83 1.50 1.50 1.50
60 280 (1060)
9.0 1.83 2.38 2.60 1.15 1.50 1.50 1.15 1.15 1.15 50 40
12.0 1.50 2.12 2.12 1.15 1.15 1.15 0.78 0.78 0.78 220 (830)
40 30
15.0 1.15 1.83 1.83 0.39 0.78 0.78 0.39 0.39 0.39 30 20
18.0 0.78 1.50 1.50 0.00 0.39 0.39 0.00 0.00 0.00 20
21.0 0.78 1.15 1.15 0.00 0.00 10 gpm (lpm) 10
24.0 0.39 0.78 0.78 0 0
27.0 0.00 0.39 0.39
30.0 0.00 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 115 psi (790 kPa) @ 340 gpm (1290 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 156 11- 157
6 1/4'' 7/8 M/L 4.8 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 400 gpm 1510 lpm
Revolutions per Unit Volume 0.35 rev/gal 0.092 rev/l
Pressure at Full Load 620 psi 4270 kPa
Torque at Full Load 4,840 lb-ft 6558 Nm
Maximum Weight on Bit 87,000 lbs 390 kN
Maximum Pull to Re-Run Motor 215,000 lbs 970 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 642,000 lbs 2890 kN
B 6.6 ft (2.01 m)
C 26.6 ft (8.11 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.12 in
(181 mm)
E Radius of Offset Pad: 3.44 in (87 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 XH
4 1/2 H-90
140
Common Bottom Connection: 4 1/2 REG 400 (1510)
120
Weight: 1940 lbs (880 kg)

SPEED : RPM
100 320 (1210)

Predicted Build Rates - Degrees/100ft (30m) 80


240 (910)
Bend Slick Single Two
60
Setting Stabilizer Stabilizers 160 (610)
Hole Size Hole Size Hole Size 40
Deg 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4
20 gpm (lpm)
0.39 1.3 1.4 1.2 2.4 2.7 2.8 1.7 1.7 1.7
0.78 3.3 2.5 2.5 4.5 4.8 4.9 4.1 4.1 4.1 0
1.15 5.7 4.3 3.8 6.5 6.8 6.9 6.3 6.3 6.3
1.50 7.9 6.6 6.0 8.4 8.7 8.8 8.4 8.4 8.4 8000
1.83 10.0 8.7 8.1 10.0 10.5 10.6 10.2 10.5 10.5 10000
7000
2.12 11.9 10.5 9.9 11.9 12.1 12.1 11.9 12.1 12.1
6000
TORQUE : lb-ft

8000

TORQUE : N.m
2.38 13.6 12.1 11.6 13.6 13.5 13.5 13.6 13.5 13.5
2.60 15.0 13.5 13.0 15.0 14.7 14.7 15.0 14.7 14.7 5000
2.77 16.1 14.6 14.0 16.1 15.6 15.6 16.1 15.6 15.6 6000
4000
2.89 16.8 15.4 14.8 16.8 16.2 16.3 16.8 16.2 16.3 FULL LOAD
2.97 17.3 15.9 15.3 17.3 16.7 16.7 17.3 16.7 16.7 3000 4000
3.00 17.5 16.1 15.5 17.5 16.8 16.9 17.5 16.8 16.9 2000
2000
1000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 150
Hole Size Hole Size Hole Size gpm (lpm) 400 (1510) 100

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 7 7/8 8 1/2 8 3/4 125
0.0 3.00 3.00 3.00 2.60 3.00 3.00 2.38 2.89 3.00 80
100 320 (1210)
2.5 3.00 3.00 3.00 2.12 2.77 2.77 2.12 2.38 2.38
5.0 2.60 3.00 3.00 1.83 2.38 2.38 1.50 2.12 2.12 60
75
7.5 2.12 2.60 2.77 1.50 1.83 1.83 1.15 1.50 1.50
240 (910)
10.0 1.83 2.12 2.38 1.15 1.50 1.50 1.15 1.15 1.15 50 40
12.5 1.50 1.83 2.12 0.78 1.15 1.15 0.78 0.78 0.78
15.0 1.15 1.50 1.50 0.39 0.39 0.78 0.39 0.39 0.39 25 160 (610) 20
17.5 0.78 1.15 1.15 0.00 0.00 0.00 0.00 0.00 0.00
20.0 0.39 0.78 0.78 0 0
22.5 0.00 0.39 0.39
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 140 psi (960 kPa) @ 320 gpm (1210 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 158 11- 159
6 3/4'' 1/2 H/S 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 500 gpm 1890 lpm
Revolutions per Unit Volume 0.97 rev/gal 0.256 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 990 lb-ft 1341 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 20.8 ft (6.34 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
500
Common Bottom Connection: 4 1/2 REG 6 5/8 REG 500 (1890)
450
400
Weight: 1770 lbs (800 kg)

SPEED : RPM
400 (1510)
350
Predicted Build Rates - Degrees/100ft (30m) 300
300 (1140)
Bend Slick Single Two 250
Setting Stabilizer Stabilizers 200
200 (760)
Hole Size Hole Size Hole Size 150
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 100
0.39 1.5 1.8 1.5 3.0 3.2 4.0 1.9 1.9 1.9 50 gpm (lpm)
0.78 3.4 3.0 2.9 5.5 5.6 6.4 4.6 4.6 4.6 0
1.15 6.3 5.6 4.3 7.8 7.9 8.6 7.3 7.3 7.3
1.50 9.0 8.3 5.6 10.0 10.1 10.8 9.8 9.8 9.7 1600
1.83 11.5 10.8 7.9 12.0 12.2 12.8 12.0 12.1 12.1 2000
1400
2.12 13.8 13.1 10.1 13.8 14.0 14.6 13.9 14.0 14.1
1200

TORQUE : N.m
TORQUE : lb-ft

1600
2.38 15.8 15.1 12.0 15.8 15.1 16.2 15.8 15.6 16.0
2.60 17.5 16.7 13.7 17.5 16.7 17.5 17.5 17.0 17.5 1000
1200
2.77 18.8 18.1 14.9 18.8 18.1 18.5 18.8 18.1 18.5 800

FULL LOAD
2.89 19.7 19.0 15.8 19.7 19.0 19.3 19.7 19.0 19.3
600 800
2.97 20.3 19.6 16.4 20.3 19.6 19.8 20.3 19.6 19.8
3.00 20.5 19.8 16.7 20.5 19.8 20.0 20.5 19.8 20.0 400
400
200
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 70
50
Hole Size Hole Size Hole Size gpm (lpm)
OUTPUT POWER : HP

OUTPUT POWER : kW
60
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
500 (1890) 40
0.0 3.00 3.00 3.00 2.60 2.77 2.60 2.12 2.38 2.12 50
3.5 2.77 2.89 3.00 2.12 1.83 2.12 1.83 1.50 1.50
40 30
7.0 2.38 2.38 3.00 1.15 1.50 1.50 1.15 1.15 1.15 400 (1510)
10.5 1.83 2.12 2.89 0.78 0.78 1.15 0.39 0.39 0.39 30
14.0 1.50 1.50 2.38 0.39 0.39 0.39 0.00 0.00 0.00 20
300 (1140)
17.5 1.15 1.15 2.12 0.00 0.00 0.00 20
21.0 0.78 0.78 1.50 200 (760) 10
10
24.5 0.39 0.39 1.15
28.0 0.00 0.00 0.78 0 0
31.5 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 180 psi (1240 kPa) @ 400 gpm (1510 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 160 11- 161
6 3/4'' 1/2 H/S 4.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 500 gpm 1890 lpm
Revolutions per Unit Volume 1.00 rev/gal 0.264 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 1,580 lb-ft 2141 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 24.1 ft (7.35 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 500 600 700 800 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
600
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
500 500 (1890)
Weight: 2050 lbs (930 kg)

SPEED : RPM
400 400 (1510)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 300 300 (1140)
Setting Stabilizer Stabilizers
200 200 (760)
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 100
0.39 1.3 1.6 1.3 2.6 2.7 3.3 1.7 1.7 1.7 gpm (lpm)
0.78 3.0 2.7 2.6 4.8 4.9 5.5 4.2 4.2 4.3 0
1.15 5.5 4.9 3.8 6.9 7.1 7.6 6.6 6.6 6.6
1.50 7.9 7.3 5.0 8.9 9.1 9.6 8.9 8.9 8.9 2500
1.83 10.2 9.6 7.0 10.8 10.9 11.4 10.8 10.9 11.0 3000
2.12 12.1 11.5 8.9 12.1 12.6 13.0 12.5 12.6 12.9 2000
2500

TORQUE : N.m
TORQUE : lb-ft

2.38 13.9 13.3 10.6 13.9 14.1 14.5 13.9 14.1 14.5
2.60 15.4 14.8 12.1 15.4 15.3 15.7 15.4 15.3 15.7 1500 2000
2.77 16.6 16.0 13.2 16.6 16.0 16.7 16.6 16.3 16.7
2.89 17.4 16.8 14.0 17.4 16.8 17.3 17.4 17.0 17.3 1500
1000 FULL LOAD
2.97 18.0 17.3 14.6 18.0 17.3 17.8 18.0 17.3 17.8 1000
3.00 18.2 17.5 14.8 18.2 17.5 18.0 18.2 17.5 18.0 500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 160
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
140
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 500 (1890) 100
0.0 3.00 3.00 3.00 2.60 2.89 2.77 2.38 2.60 2.12 120
80
3.0 3.00 3.00 3.00 2.12 2.12 2.12 2.12 1.83 1.83 100 400 (1510)
6.0 2.60 2.77 3.00 1.50 1.50 1.83 1.15 1.15 1.15
80 60
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78
12.0 1.83 1.83 2.60 0.39 0.78 0.78 0.39 0.39 0.39 60 300 (1140) 40
15.0 1.50 1.50 2.12 0.00 0.00 0.39 0.00 0.00 0.00 40
18.0 0.78 1.15 1.83 200 (760) 20
20
21.0 0.39 0.78 1.50 gpm (lpm)
24.0 0.39 0.39 1.15 0 0
27.0 0.00 0.00 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 180 psi (1240 kPa) @ 400 gpm (1510 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 162 11- 163
6 3/4'' 2/3 M/L 7.0 Stage (OS)
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.85 rev/gal 0.225 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 2,820 lb-ft 3821 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 26.2 ft (7.99 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
600
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
500 600 (2270)
Weight: 2230 lbs (1010 kg)

SPEED : RPM
400 500 (1890)
Predicted Build Rates - Degrees/100ft (30m) 400 (1510)
Bend Slick Single Two 300
Setting Stabilizer Stabilizers 300 (1140)
200
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 100
0.39 1.3 1.4 1.2 2.4 2.5 3.0 1.6 1.6 1.7 gpm (lpm)
0.78 2.7 2.5 2.4 4.5 4.6 5.1 4.0 4.0 4.0 0
1.15 5.1 4.6 3.6 6.5 6.6 7.1 6.3 6.3 6.3
1.50 7.3 6.8 4.7 8.4 8.5 8.9 8.4 8.4 8.4 4000
1.83 9.4 8.9 6.5 10.2 10.3 10.7 10.2 10.3 10.4 5000
3500
2.12 11.3 10.7 8.3 11.7 11.8 12.2 11.7 11.8 12.1

TORQUE : N.m
3000
TORQUE : lb-ft

4000
2.38 13.0 12.4 9.9 13.0 13.2 13.6 13.2 13.2 13.6
2.60 14.4 13.8 11.3 14.4 14.4 14.8 14.4 14.4 14.8 2500
3000
2.77 15.4 14.9 12.3 15.4 15.3 15.7 15.4 15.3 15.7 2000
2.89 16.2 15.6 13.1 16.2 15.6 16.3 16.2 16.0 16.3

FULL LOAD
1500 2000
2.97 16.7 16.1 13.6 16.7 16.1 16.7 16.7 16.4 16.7
3.00 16.9 16.3 13.8 16.9 16.3 16.9 16.9 16.6 16.9 1000
1000
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 240 175
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 150
600 (2270)
0.0 3.00 3.00 3.00 2.77 3.00 2.77 2.60 2.60 2.38 125
160
3.0 3.00 3.00 3.00 2.38 2.12 2.12 2.12 1.83 1.83 500 (1890)
6.0 2.60 2.77 3.00 1.50 1.50 1.83 1.50 1.50 1.50 100
120
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 400 (1510) 75
12.0 1.83 1.83 2.60 0.39 0.78 0.78 0.39 0.39 0.39 80
15.0 1.15 1.50 2.12 0.00 0.00 0.39 0.00 0.00 0.00 300 (1140) 50
18.0 0.78 1.15 1.83 40 25
21.0 0.39 0.78 1.15 gpm (lpm)
24.0 0.00 0.39 0.78 0 0
27.0 0.00 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 110 psi (760 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 164 11- 165
6 3/4'' 4/5 M/L 4.8 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.52 rev/gal 0.137 rev/l
Pressure at Full Load 620 psi 4270 kPa
Torque at Full Load 3,440 lb-ft 4661 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 21.9 ft (6.68 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
350
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
300 600 (2270)
Weight: 1860 lbs (840 kg)

SPEED : RPM
250 500 (1890)

Predicted Build Rates - Degrees/100ft (30m) 200 400 (1510)


Bend Slick Single Two
150 300 (1140)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 100
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 gpm (lpm)
50
0.39 1.5 1.7 1.4 2.8 3.0 3.7 1.8 1.8 1.8
0.78 3.2 2.9 2.8 5.2 5.4 6.1 4.5 4.5 4.5 0
1.15 6.0 5.4 4.1 7.5 7.6 8.3 7.1 7.1 7.0
1.50 8.6 7.9 5.4 9.6 9.7 10.3 9.5 9.5 9.4 6000 8000
1.83 11.0 10.4 7.6 11.6 11.7 12.3 11.6 11.7 11.7 7000
5000
2.12 13.2 12.5 9.6 13.2 13.5 14.0 13.4 13.5 13.7
TORQUE : lb-ft

6000

TORQUE : N.m
2.38 15.1 14.4 11.5 15.1 15.1 15.6 15.1 15.1 15.5 4000
2.60 16.7 16.0 13.1 16.7 16.0 16.9 16.7 16.4 16.9 5000
2.77 18.0 17.3 14.3 18.0 17.3 17.9 18.0 17.3 17.9 3000 4000

FULL LOAD
2.89 18.9 18.2 15.2 18.9 18.2 18.6 18.9 18.2 18.6
3000
2.97 19.5 18.8 15.8 19.5 18.8 19.1 19.5 18.8 19.1 2000
3.00 19.7 19.0 16.0 19.7 19.0 19.2 19.7 19.0 19.2 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 200
140
Hole Size Hole Size Hole Size 180
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
600 (2270)
160 120
0.0 3.00 3.00 3.00 2.60 2.77 2.60 2.38 2.38 2.12 140
500 (1890) 100
3.5 2.77 3.00 3.00 2.12 1.83 2.12 1.83 1.50 1.50 120
7.0 2.38 2.60 3.00 1.50 1.50 1.50 1.15 1.15 1.15 80
100
10.5 1.83 2.12 2.89 0.78 0.78 1.15 0.39 0.39 0.39 400 (1510)
80 60
14.0 1.50 1.50 2.38 0.39 0.39 0.39 0.00 0.00 0.00
17.5 1.15 1.15 2.12 0.00 0.00 60 40
300 (1140)
21.0 0.78 0.78 1.50 40
20
24.5 0.39 0.39 1.15 20 gpm (lpm)
28.0 0.00 0.00 0.78 0 0
31.5 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 190 psi (1310 kPa) @ 500 gpm (1890 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 166 11- 167
6 3/4'' 4/5 M/L 7.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.50 rev/gal 0.132 rev/l
Pressure at Full Load 910 psi 6270 kPa
Torque at Full Load 5,160 lb-ft 6992 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 27 ft (8.23 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
350
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
300 600 (2270)
Weight: 2300 lbs (1040 kg)

SPEED : RPM
250 500 (1890)
Predicted Build Rates - Degrees/100ft (30m) 200 400 (1510)
Bend Slick Single Two
150
Setting Stabilizer Stabilizers 300 (1140)
Hole Size Hole Size Hole Size 100
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 gpm (lpm)
50
0.39 1.2 1.4 1.2 2.3 2.4 2.9 1.6 1.6 1.6
0.78 2.7 2.4 2.8 4.4 4.5 5.0 3.9 3.9 3.9 0
1.15 5.0 4.4 3.5 6.3 6.4 6.9 6.1 6.1 6.1
1.50 7.1 6.6 4.6 8.2 8.3 8.7 8.2 8.2 8.2 7000
9000
1.83 9.2 8.7 6.3 9.9 10.0 10.4 9.9 10.0 10.2 6000 8000
2.12 11.0 10.5 8.1 11.5 11.6 11.9 11.5 11.6 11.9
TORQUE : lb-ft

7000

TORQUE : N.m
2.38 12.6 12.1 9.7 12.6 12.9 13.3 12.9 12.9 13.3 5000
2.60 14.0 13.4 11.0 14.0 14.1 14.4 14.0 14.1 14.4 6000
4000
2.77 15.0 14.5 12.0 15.0 15.0 15.3 15.0 15.0 15.3 5000

FULL LOAD
2.89 15.8 15.2 12.8 15.8 15.6 15.9 15.8 15.6 15.9 3000 4000
2.97 16.3 15.7 13.2 16.3 15.7 16.3 16.3 16.1 16.3 2000 3000
3.00 16.5 15.9 13.4 16.5 15.9 16.5 16.5 16.2 16.5 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

300 gpm (lpm)


Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
200
0.0 3.00 3.00 3.00 2.77 3.00 2.89 2.60 2.77 2.38 250
3.0 3.00 3.00 3.00 2.38 2.12 2.38 2.12 1.83 1.83 600 (2270)
200 150
6.0 2.60 2.77 3.00 1.50 1.50 1.83 1.50 1.50 1.50
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 500 (1890)
150
12.0 1.83 1.83 2.60 0.39 0.78 0.78 0.39 0.39 0.39 100
400 (1510)
15.0 1.15 1.50 2.12 0.00 0.00 0.00 0.00 0.00 0.00 100
18.0 0.78 1.15 1.83 300 (1140) 50
50
21.0 0.39 0.78 1.15
24.0 0.00 0.00 0.78 0 0
27.0 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 210 psi (1450 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 168 11- 169
6 3/4'' 5/6 M/L 5.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.47 rev/gal 0.124 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 4,380 lb-ft 5935 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 21.9 ft (6.68 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
300
Common Bottom Connection: 4 1/2 REG 6 5/8 REG 600 (2270)
250
Weight: 1860 lbs (840 kg)

SPEED : RPM
470 (1780)
200
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 150 340 (1290)
Setting Stabilizer Stabilizers
100 210 (790)
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 50 gpm (lpm)
0.39 1.5 1.7 1.4 2.8 3.0 3.7 1.8 1.8 1.8
0.78 3.2 2.9 2.8 5.2 5.4 6.1 4.5 4.5 4.5 0
1.15 6.0 5.4 4.1 7.5 7.6 8.3 7.1 7.1 7.0
1.50 8.6 7.9 5.4 9.6 9.7 10.3 9.5 9.5 9.4 7000
9000
1.83 11.0 10.4 7.6 11.6 11.7 12.3 11.6 11.7 11.7
6000 8000
2.12 13.2 12.5 9.6 13.2 13.5 14.0 13.4 13.5 13.7
TORQUE : lb-ft

7000

TORQUE : N.m
2.38 15.1 14.4 11.5 15.1 15.1 15.6 15.1 15.1 15.5 5000
2.60 16.7 16.0 13.1 16.7 16.0 16.9 16.7 16.4 16.9 6000
2.77 18.0 17.3 14.3 18.0 17.3 17.9 18.0 17.3 17.9 4000
5000
2.89 18.9 18.2 15.2 18.9 18.2 18.6 18.9 18.2 18.6 3000 4000

FULL LOAD
2.97 19.5 18.8 15.8 19.5 18.8 19.1 19.5 18.8 19.1
2000 3000
3.00 19.7 19.0 16.0 19.7 19.0 19.2 19.7 19.0 19.2
2000
1000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

300

OUTPUT POWER : kW
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 600 (2270) 200
0.0 3.00 3.00 3.00 2.60 2.77 2.60 2.38 2.38 2.12 250
3.5 2.77 3.00 3.00 2.12 1.83 2.12 1.83 1.50 1.50 470 (1780)
200 150
7.0 2.38 2.60 3.00 1.50 1.50 1.50 1.15 1.15 1.15
10.5 1.83 2.12 2.89 0.78 0.78 1.15 0.39 0.39 0.39 150 340 (1290)
14.0 1.50 1.50 2.38 0.39 0.39 0.39 0.00 0.00 0.00 100
17.5 1.15 1.15 2.12 0.00 0.00 100
210 (790)
21.0 0.78 0.78 1.50 50
50
24.5 0.39 0.39 1.15 gpm (lpm)
28.0 0.00 0.00 0.78 0 0
31.5 0.39
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 200 psi (1380 kPa) @ 470 gpm (1780 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 170 11- 171
6 3/4'' 6/7 M/L 5.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.29 rev/gal 0.077 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 5,410 lb-ft 7331 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 26.2 ft (7.99 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
200
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
180
600 (2270)
160
Weight: 2230 lbs (1010 kg)

SPEED : RPM
140 500 (1890)
Predicted Build Rates - Degrees/100ft (30m) 120
400 (1510)
Bend Slick Single Two 100
Setting Stabilizer Stabilizers 80 300 (1140)
Hole Size Hole Size Hole Size 60
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 40
0.39 1.3 1.4 1.2 2.4 2.5 3.0 1.6 1.6 1.7 20 gpm (lpm)
0.78 2.7 2.5 2.4 4.5 4.6 5.1 4.0 4.0 4.0 0
1.15 5.1 4.6 3.6 6.5 6.6 7.1 6.3 6.3 6.3
1.50 7.3 6.8 4.7 8.4 8.5 8.9 8.4 8.4 8.4 9000 12000
1.83 9.4 8.9 6.5 10.2 10.3 10.7 10.2 10.3 10.4 8000
2.12 11.3 10.7 8.3 11.8 11.8 12.2 11.8 11.8 12.1 10000
7000
TORQUE : lb-ft

TORQUE : N.m
2.38 13.0 12.4 9.9 13.0 13.2 13.6 13.2 13.2 13.6
6000 8000
2.60 14.4 13.8 11.3 14.4 14.4 14.8 14.4 14.4 14.8
2.77 15.4 14.9 12.3 15.4 15.4 15.7 15.4 15.4 15.7 5000
6000
2.89 16.2 15.6 13.1 16.2 15.6 16.3 16.2 16.0 16.3 4000

FULL LOAD
2.97 16.7 16.1 13.6 16.7 16.1 16.7 16.7 16.4 16.7 3000 4000
3.00 16.9 16.3 13.8 16.9 16.3 16.9 16.9 16.6 16.9
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 225
160
Hole Size Hole Size Hole Size 200

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 600 (2270) 140
175
0.0 3.00 3.00 3.00 2.77 3.00 2.77 2.60 2.60 2.38 120
150
3.0 3.00 3.00 3.00 2.38 2.12 2.12 2.12 1.83 1.83 500 (1890) 100
6.0 2.60 2.77 3.00 1.50 1.50 1.83 1.50 1.50 1.50 125
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 100 80
400 (1510)
12.0 1.83 1.83 2.60 0.39 0.78 0.78 0.39 0.39 0.39 75 60
15.0 1.15 1.50 2.12 0.00 0.00 0.39 0.00 0.00 0.00 300 (1140) 40
50
18.0 0.78 1.15 1.83
25 20
21.0 0.39 0.78 1.15 gpm (lpm)
24.0 0.00 0.39 0.78 0 0
27.0 0.00 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 170 psi (1170 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 172 11- 173
6 3/4'' 6/7 M/L 6.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.29 rev/gal 0.077 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 6,500 lb-ft 8808 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 31.47 ft (9.59 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
180
Common Bottom Connection: 4 1/2 REG 6 5/8 REG 600 (2270)
160
140 500 (1890)
Weight: 2680 lbs (1210 kg)

SPEED : RPM
120
400 (1510)
Predicted Build Rates - Degrees/100ft (30m) 100
Bend Slick Single Two 80 300 (1140)
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
40
0.39 1.1 1.3 1.1 2.0 2.1 2.5 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.4 2.2 2.5 3.9 4.0 4.4 3.6 3.6 3.6 0
1.15 4.5 4.0 3.2 5.8 5.8 6.2 5.6 5.6 5.6
1.50 6.4 5.9 4.1 7.5 7.5 7.9 7.5 7.5 7.5 9000 12000
1.83 8.3 7.8 5.7 9.1 9.2 9.5 9.1 9.2 9.3 8000
2.12 9.9 9.4 7.3 10.5 10.6 10.9 10.5 10.6 10.9 10000
TORQUE : lb-ft

7000

TORQUE : N.m
2.38 11.4 10.9 8.7 11.8 11.8 12.1 11.8 11.8 12.1
6000 8000
2.60 12.6 12.1 9.9 12.6 12.9 13.2 12.8 12.9 13.2
2.77 13.6 13.1 10.9 13.6 13.7 14.0 13.6 13.7 14.0 5000
6000
2.89 14.3 13.7 11.5 14.3 14.3 14.5 14.3 14.3 14.5

FULL LOAD
4000
2.97 14.7 14.2 12.0 14.7 14.7 14.9 14.7 14.7 14.9 3000 4000
3.00 14.9 14.4 12.1 14.9 14.9 15.1 14.9 14.9 15.1
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 240 175
Hole Size Hole Size Hole Size gpm (lpm)

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 150
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 3.00 2.77 600 (2270) 125
160
2.5 3.00 3.00 3.00 2.60 2.38 2.60 2.38 2.12 2.12
5.0 3.00 3.00 3.00 1.83 1.83 2.12 1.83 1.83 1.83 500 (1890) 100
120
7.5 2.60 2.77 3.00 1.50 1.50 1.50 1.15 1.15 1.15 75
400 (1510)
10.0 2.12 2.38 3.00 0.78 1.15 1.15 0.78 0.78 0.78 80
12.5 1.83 1.83 2.38 0.39 0.39 0.39 0.39 0.39 0.39 50
300 (1140)
15.0 1.15 1.50 2.12 0.00 0.00 0.00 0.00 0.00 0.00 40 25
17.5 0.78 1.15 1.50
20.0 0.39 0.78 1.15 0 0
22.5 0.00 0.39 0.78
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 180 psi (1240 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 174 11- 175
6 3/4'' 7/8 M/L 2.0 Stage (Air)
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.14 rev/gal 0.037 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 4,730 lb-ft 6409 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 22.4 ft (6.83 m)
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
90
Common Bottom Connection: 4 1/2 REG 6 5/8 REG 600 (2270)
80

Weight: 1910 lbs (860 kg) 70 500 (1890)

SPEED : RPM
60
Predicted Build Rates - Degrees/100ft (30m) 400 (1510)
50
Bend Slick Single Two 40 300 (1140)
Setting Stabilizer Stabilizers
30
Hole Size Hole Size Hole Size
20 gpm (lpm)
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
0.39 1.4 1.7 1.4 2.8 3.0 3.6 1.8 1.8 1.8 10
0.78 3.2 2.8 2.8 5.1 5.3 5.9 4.5 4.5 4.5 0
1.15 5.9 5.3 4.1 7.4 7.5 8.1 7.0 7.0 7.0
1.50 8.4 7.8 5.3 9.5 9.6 10.2 9.3 9.3 9.3 8000
1.83 10.8 10.2 7.4 11.5 11.6 12.1 11.5 11.6 11.6 10000
7000
2.12 13.0 12.3 9.5 13.0 13.3 13.8 13.2 13.3 13.5
6000 8000
TORQUE : lb-ft

2.38 14.9 14.2 11.3 14.9 14.9 15.3 14.9 14.9 15.3

TORQUE : N.m
2.60 16.5 15.8 12.9 16.5 15.8 16.6 16.5 16.2 16.6 5000
2.77 17.7 17.0 14.1 17.7 17.0 17.6 17.7 17.2 17.6 6000
4000
2.89 18.6 17.9 14.9 18.6 17.9 18.3 18.6 17.9 18.3

FULL LOAD
2.97 19.2 18.5 15.5 19.2 18.5 18.8 19.2 18.5 18.8 3000 4000
3.00 19.4 18.7 15.7 19.4 18.7 19.0 19.4 18.7 19.0 2000
2000
1000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 80
Hole Size Hole Size Hole Size 70

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 600 (2270) 50
0.0 3.00 3.00 3.00 2.60 2.77 2.60 2.38 2.38 2.12 60
500 (1890) 40
3.0 2.89 3.00 3.00 2.12 2.12 2.12 1.83 1.83 1.83 50
6.0 2.38 2.60 3.00 1.50 1.50 1.83 1.15 1.15 1.15
40 30
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 400 (1510)
12.0 1.83 1.83 2.60 0.78 0.78 0.78 0.39 0.39 0.39 30
20
15.0 1.50 1.50 2.38 0.00 0.00 0.39 0.00 0.00 0.00 20 300 (1140)
18.0 1.15 1.15 1.83 0.00 10
10
21.0 0.78 0.78 1.50 gpm (lpm)
24.0 0.39 0.39 1.15 0 0
27.0 0.00 0.00 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 160 psi (1100 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 176 11- 177
6 3/4'' 7/8 M/L 2.9 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 500 gpm 1890 lpm
Revolutions per Unit Volume 0.17 rev/gal 0.045 rev/l
Pressure at Full Load 515 psi 3550 kPa
Torque at Full Load 7,450 lb-ft 10095 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 28.2 ft (8.6 m)
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
90
Common Bottom Connection: 4 1/2 REG 6 5/8 REG 500 (1890)
80

Weight: 2400 lbs (1090 kg) 70


400 (1510)

SPEED : RPM
60
Predicted Build Rates - Degrees/100ft (30m) 50 300 (1140)
Bend Slick Single Two 40
Setting Stabilizer Stabilizers 200 (760)
30
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
20
0.39 1.2 1.3 1.1 2.2 2.3 2.8 1.6 1.6 1.6 10 gpm (lpm)
0.78 2.5 2.3 2.7 4.2 4.3 4.7 3.8 3.8 3.8 0
1.15 4.7 4.2 3.4 6.1 6.2 6.6 5.9 5.9 5.9
1.50 6.8 6.3 4.4 7.9 8.0 8.3 7.9 7.9 7.9 10000
1.83 8.8 8.3 6.0 9.6 9.7 10.0 9.6 9.7 9.8 9000 12000
2.12 10.5 10.0 7.7 11.1 11.1 11.5 11.1 11.1 11.4 8000
10000
TORQUE : lb-ft

2.38 12.1 11.6 9.3 12.4 12.5 12.8 12.4 12.5 12.8

TORQUE : N.m
7000
2.60 13.4 12.9 10.5 13.4 13.6 13.9 13.5 13.6 13.9 6000 8000
2.77 14.4 13.9 11.5 14.4 14.5 14.7 14.4 14.5 14.7
5000
2.89 15.1 14.6 12.2 15.1 15.1 15.3 15.1 15.1 15.3 6000

FULL LOAD
4000
2.97 15.6 15.1 12.7 15.6 15.5 15.7 15.6 15.5 15.7
3.00 15.8 15.2 12.9 15.8 15.6 15.9 15.8 15.6 15.9 3000 4000
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 140
100
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
120
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
500 (1890) 80
0.0 3.00 3.00 3.00 2.77 3.00 3.00 2.60 2.77 2.60 100
2.5 3.00 3.00 3.00 2.38 2.38 2.38 2.12 2.12 2.12 400 (1510)
80 60
5.0 2.77 2.89 3.00 1.83 1.83 1.83 1.50 1.50 1.50
7.5 2.38 2.38 3.00 1.50 1.50 1.50 1.15 1.15 1.15 60 300 (1140)
10.0 1.83 2.12 2.77 0.78 0.78 1.15 0.78 0.78 0.78 40
12.5 1.50 1.83 2.38 0.39 0.39 0.78 0.39 0.39 0.39 40
200 (760)
15.0 1.15 1.15 1.83 0.00 0.00 0.00 0.00 0.00 0.00 20
20
17.5 0.78 0.78 1.50 gpm (lpm)
20.0 0.39 0.39 1.15 0 0
22.5 0.00 0.39 0.78
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 220 psi (1520 kPa) @ 400 gpm (1510 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 178 11- 179
6 3/4'' 7/8 M/L 3.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.28 rev/gal 0.074 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 3,490 lb-ft 4729 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 20 ft (6.1 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
180
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
600 (2270)
160

Weight: 1700 lbs (770 kg) 140

SPEED : RPM
500 (1890)
120
Predicted Build Rates - Degrees/100ft (30m) 100 400 (1510)
Bend Slick Single Two 80
Setting Stabilizer Stabilizers 300 (1140)
60
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
40
gpm (lpm)
0.39 1.6 1.9 1.5 3.1 3.3 4.2 1.9 1.9 1.9 20
0.78 3.6 3.1 3.0 5.6 5.8 6.6 4.7 4.8 4.8 0
1.15 6.5 5.8 4.5 8.0 8.2 8.9 7.5 7.5 7.4
1.50 9.3 8.6 5.8 10.3 10.4 11.1 10.0 10.0 10.0 6000 8000
1.83 11.9 11.2 8.2 11.9 12.6 13.2 12.4 12.4 12.4 7000
5000
2.12 14.3 13.5 10.4 14.3 14.4 15.0 14.3 14.4 14.5
TORQUE : lb-ft

TORQUE : N.m
6000
2.38 16.3 15.6 12.4 16.3 15.6 16.7 16.3 16.1 16.4 4000
2.60 18.1 17.4 14.1 18.1 17.4 18.0 18.1 17.5 18.0 5000
2.77 19.5 18.7 15.5 19.5 18.7 19.1 19.5 18.7 19.1 3000 4000

FULL LOAD
2.89 20.4 19.7 16.4 20.4 19.7 19.9 20.4 19.7 19.9
3000
2.97 21.0 20.3 17.0 21.0 20.3 20.4 21.0 20.3 20.4 2000
3.00 21.3 20.5 17.2 21.3 20.5 20.5 21.3 20.5 20.5 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 140
100
Hole Size Hole Size Hole Size
90
OUTPUT POWER : HP

OUTPUT POWER : kW
120
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 600 (2270)
80
0.0 3.00 3.00 3.00 2.60 2.77 2.60 2.12 2.38 2.12 100
500 (1890) 70
3.5 2.60 2.89 3.00 2.12 1.83 2.12 1.83 1.50 1.50
80 60
7.0 2.38 2.38 3.00 1.15 1.50 1.50 1.15 1.15 1.15
10.5 1.83 2.12 2.89 0.78 0.78 1.15 0.39 0.39 0.39 400 (1510) 50
60
14.0 1.50 1.83 2.38 0.39 0.39 0.39 0.00 0.00 0.00 40
17.5 1.15 1.15 2.12 0.00 0.00 0.00 40 300 (1140) 30
21.0 0.78 0.78 1.83 20
20 gpm (lpm)
24.5 0.39 0.39 1.15 10
28.0 0.00 0.00 0.78 0 0
31.5 0.00 0.39
35.0 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 200 psi (1380 kPa) @ 500 gpm (1890 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 180 11- 181
6 3/4'' 7/8 M/L 3.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.15 rev/gal 0.040 rev/l
Pressure at Full Load 460 psi 3170 kPa
Torque at Full Load 7,830 lb-ft 10610 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 31.3 ft (9.54 m)
0 1000 2000 3000 4000
D Maximum Diameter of Motor at Upset: 7.63 in kPa
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
100
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
90 600 (2270)
80
Weight: 2660 lbs (1210 kg)

SPEED : RPM
70 500 (1890)

Predicted Build Rates - Degrees/100ft (30m) 60 400 (1510)


Bend Slick Single Two 50
300 (1140)
Setting Stabilizer Stabilizers 40
Hole Size Hole Size Hole Size 30
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 20 gpm (lpm)
0.39 1.1 1.2 1.1 2.0 2.1 2.5 1.5 1.5 1.5 10
0.78 2.3 2.1 2.4 3.8 3.9 4.3 3.5 3.5 3.5 0
1.15 4.3 3.9 3.1 5.6 5.7 6.0 5.5 5.5 5.5
1.50 6.3 5.8 4.0 7.3 7.4 7.7 7.3 7.4 7.4 12000 16000
1.83 8.1 7.6 5.6 8.9 8.9 9.2 8.9 8.9 9.1
10000 14000
2.12 9.7 9.2 7.1 10.3 10.3 10.6 10.3 10.3 10.6

TORQUE : N.m
TORQUE : lb-ft

2.38 11.1 10.6 8.5 11.5 11.6 11.8 11.5 11.6 11.8 12000
8000
2.60 12.3 11.8 9.7 12.6 12.6 12.9 12.6 12.6 12.9 10000
2.77 13.2 12.8 10.6 13.2 13.4 13.7 13.4 13.4 13.7
6000 8000
2.89 13.9 13.4 11.3 13.9 14.0 14.2 13.9 14.0 14.2

FULL LOAD
2.97 14.3 13.8 11.7 14.3 14.4 14.6 14.3 14.4 14.6 6000
4000
3.00 14.5 14.0 11.9 14.5 14.5 14.7 14.5 14.5 14.7 4000
2000
2000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 160
Hole Size Hole Size Hole Size 140
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 100
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.89 3.00 2.77 120
600 (2270) 80
2.5 3.00 3.00 3.00 2.60 2.38 2.60 2.38 2.38 2.12 100
5.0 3.00 3.00 3.00 1.83 1.83 2.12 2.12 1.83 1.83 500 (1890)
80 60
7.5 2.60 2.77 3.00 1.50 1.50 1.50 1.15 1.15 1.15
400 (1510)
10.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 60
40
12.5 1.83 1.83 2.38 0.39 0.39 0.39 0.39 0.39 0.39 300 (1140)
40
15.0 1.15 1.50 2.12 0.00 0.00 0.00 0.00 0.00 0.00 20
20
17.5 0.78 1.15 1.50 gpm (lpm)
20.0 0.39 0.78 1.15 0 0
22.5 0.00 0.39 0.78
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 220 psi (1520 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 182 11- 183
6 3/4'' 7/8 M/L 5.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.28 rev/gal 0.074 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 5,950 lb-ft 8062 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 25.8 ft (7.86 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
180
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
600 (2270)
160

Weight: 2190 lbs (1000 kg) 140


500 (1890)

SPEED : RPM
120
Predicted Build Rates - Degrees/100ft (30m) 100 400 (1510)
Bend Slick Single Two 80 300 (1140)
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
40
0.39 1.3 1.5 1.2 2.4 2.5 3.1 1.7 1.7 1.7 20 gpm (lpm)
0.78 2.8 2.5 2.5 4.6 4.7 5.2 4.1 4.1 4.1 0
1.15 5.2 4.6 3.6 6.6 6.7 7.2 6.3 6.3 6.3
1.50 7.4 6.9 4.8 8.5 8.6 9.1 8.5 8.5 8.5 10000
1.83 9.6 9.0 6.6 10.3 10.4 10.8 10.3 10.4 10.5 9000 12000
2.12 11.5 10.9 8.4 11.9 12.0 12.4 11.9 12.0 12.3 8000
TORQUE : lb-ft

2.38 13.2 12.6 10.1 13.2 13.4 13.8 13.3 13.4 13.8 10000

TORQUE : N.m
7000
2.60 14.6 14.0 11.4 14.6 14.6 15.0 14.6 14.6 15.0 6000 8000
2.77 15.7 15.1 12.5 15.7 15.5 15.9 15.7 15.5 15.9
5000
2.89 16.5 15.9 13.3 16.5 15.9 16.5 16.5 16.2 16.5 6000
4000

FULL LOAD
2.97 17.0 16.4 13.8 17.0 16.4 16.9 17.0 16.6 16.9
3.00 17.2 16.6 14.0 17.2 16.6 17.1 17.2 16.8 17.1 3000 4000
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 240
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
160
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 600 (2270)
140
0.0 3.00 3.00 3.00 2.77 2.89 2.77 2.60 2.60 2.38
160 500 (1890) 120
3.0 3.00 3.00 3.00 2.38 2.12 2.12 2.12 1.83 1.83
6.0 2.60 2.77 3.00 1.50 1.50 1.83 1.50 1.50 1.50 100
120
9.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78 400 (1510) 80
12.0 1.83 1.83 2.60 0.39 0.78 0.78 0.39 0.39 0.39 80 60
15.0 1.50 1.50 2.12 0.00 0.00 0.39 0.00 0.00 0.00 300 (1140)
40
18.0 0.78 1.15 1.83 40
21.0 0.39 0.78 1.15 gpm (lpm) 20
24.0 0.00 0.39 0.78 0 0
27.0 0.00 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 220 psi (1520 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 184 11- 185
6 3/4'' 7/8 M/L 5.7 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.24 rev/gal 0.064 rev/l
Pressure at Full Load 740 psi 5100 kPa
Torque at Full Load 8,010 lb-ft 10854 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 31.3 ft (9.54 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
160
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
600 (2270)
140
Weight: 2660 lbs (1210 kg) 120 500 (1890)

SPEED : RPM
100 400 (1510)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 80
300 (1140)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
0.39 1.1 1.2 1.1 2.0 2.1 2.5 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.3 2.1 2.4 3.8 3.9 4.3 3.5 3.5 3.5 0
1.15 4.3 3.9 3.1 5.6 5.7 6.0 5.5 5.5 5.5
1.50 6.3 5.8 4.0 7.3 7.4 7.7 7.3 7.4 7.4 12000
1.83 8.1 7.6 5.6 8.9 8.9 9.2 8.9 8.9 9.1 15000
2.12 9.7 9.2 7.1 10.3 10.3 10.6 10.3 10.3 10.6 10000
12500
TORQUE : lb-ft

TORQUE : N.m
2.38 11.1 10.6 8.5 11.5 11.6 11.8 11.5 11.6 11.8
8000
2.60 12.3 11.8 9.7 12.6 12.6 12.9 12.6 12.6 12.9 10000
2.77 13.2 12.8 10.6 13.2 13.4 13.7 13.4 13.4 13.7
6000
2.89 13.9 13.4 11.3 13.9 14.0 14.2 13.9 14.0 14.2 7500

FULL LOAD
2.97 14.3 13.8 11.7 14.3 14.4 14.6 14.3 14.4 14.6 4000 5000
3.00 14.5 14.0 11.9 14.5 14.5 14.7 14.5 14.5 14.7
2000 2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 150
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.89 3.00 2.77 600 (2270)
125
2.5 3.00 3.00 3.00 2.60 2.38 2.60 2.38 2.38 2.12 150
5.0 3.00 3.00 3.00 1.83 1.83 2.12 2.12 1.83 1.83 500 (1890) 100
7.5 2.60 2.77 3.00 1.50 1.50 1.50 1.15 1.15 1.15 400 (1510)
100 75
10.0 2.12 2.38 3.00 1.15 1.15 1.15 0.78 0.78 0.78
12.5 1.83 1.83 2.38 0.39 0.39 0.39 0.39 0.39 0.39 300 (1140) 50
15.0 1.15 1.50 2.12 0.00 0.00 0.00 0.00 0.00 0.00 50
25
17.5 0.78 1.15 1.50 gpm (lpm)
20.0 0.39 0.78 1.15 0 0
22.5 0.00 0.39 0.78
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 220 psi (1520 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 186 11- 187
6 3/4'' 7/8 M/L 6.4 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.31 rev/gal 0.082 rev/l
Pressure at Full Load 830 psi 5720 kPa
Torque at Full Load 6,340 lb-ft 8591 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 30.5 ft (9.3 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
200
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
180 600 (2270)
160
Weight: 2590 lbs (1180 kg) 500 (1890)

SPEED : RPM
140
120 400 (1510)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 100
300 (1140)
Setting Stabilizer Stabilizers 80
Hole Size Hole Size Hole Size 60
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 40
0.39 1.1 1.3 1.1 2.0 2.1 2.5 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.4 2.2 2.5 3.9 4.0 4.4 3.6 3.6 3.6 0
1.15 4.4 4.0 3.2 5.7 5.8 6.2 5.6 5.6 5.6
1.50 6.4 5.9 4.1 7.5 7.5 7.9 7.5 7.5 7.5 8000
1.83 8.3 7.8 5.7 9.1 9.1 9.4 9.1 9.1 9.3 10000
7000
2.12 9.9 9.4 7.3 10.5 10.5 10.8 10.5 10.5 10.8
TORQUE : lb-ft

6000

TORQUE : N.m
8000
2.38 11.4 10.9 8.7 11.7 11.8 12.1 11.7 11.8 12.1
2.60 12.6 12.1 9.9 12.6 12.9 13.1 12.8 12.9 13.1 5000
6000
2.77 13.6 13.0 10.9 13.6 13.7 13.9 13.6 13.7 13.9 4000
2.89 14.2 13.7 11.5 14.2 14.3 14.5 14.2 14.3 14.5

FULL LOAD
3000 4000
2.97 14.7 14.2 12.0 14.7 14.7 14.9 14.7 14.7 14.9
3.00 14.8 14.3 12.1 14.8 14.8 15.0 14.8 14.8 15.0 2000
2000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 150
0.0 3.00 3.00 3.00 3.00 3.00 3.00 2.77 3.00 2.77
600 (2270) 125
2.5 3.00 3.00 3.00 2.60 2.38 2.60 2.38 2.12 2.12 150
5.0 3.00 3.00 3.00 1.83 1.83 2.12 1.83 1.83 1.83 500 (1890) 100
7.5 2.60 2.77 3.00 1.50 1.50 1.50 1.15 1.15 1.15
100 400 (1510) 75
10.0 2.12 2.38 3.00 0.78 1.15 1.15 0.78 0.78 0.78
12.5 1.83 1.83 2.38 0.39 0.39 0.39 0.39 0.39 0.39 300 (1140) 50
15.0 1.15 1.50 2.12 0.00 0.00 0.00 0.00 0.00 0.00 50
25
17.5 0.78 1.15 1.50 gpm (lpm)
20.0 0.39 0.78 1.15 0 0
22.5 0.00 0.39 0.78
25.0 0.00 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 300 psi (2070 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 188 11- 189
7'' 7/8 M/L 6.0 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.31 rev/gal 0.082 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 5,940 lb-ft 8049 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 26.2 ft (7.99 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
200
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
180 600 (2270)
160
Weight: 2400 lbs (1090 kg) 500 (1890)

SPEED : RPM
140
120 400 (1510)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 100
80 300 (1140)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 60
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 40
0.39 1.3 1.2 1.2 2.2 2.4 2.9 1.6 1.6 1.7 20 gpm (lpm)
0.78 2.6 2.5 2.9 4.3 4.5 5.0 4.0 4.0 4.0 0
1.15 4.9 4.4 3.6 6.4 6.5 6.9 6.3 6.3 6.3
1.50 7.2 6.6 4.7 8.3 8.4 8.8 8.3 8.4 8.4 8000
1.83 9.3 8.7 6.3 10.0 10.1 10.5 10.0 10.1 10.4 10000
7000
2.12 11.1 10.6 8.1 11.6 11.7 12.1 11.6 11.7 12.1
TORQUE : lb-ft

TORQUE : N.m
6000 8000
2.38 12.8 12.2 9.8 12.8 13.1 13.5 13.0 13.1 13.5
2.60 14.2 13.6 11.1 14.2 14.3 14.6 14.2 14.3 14.6 5000
2.77 15.3 14.7 12.2 15.3 15.2 15.5 15.3 15.2 15.5 6000
4000
2.89 16.1 15.5 12.9 16.1 15.9 16.2 16.1 15.9 16.2

FULL LOAD
2.97 16.6 16.0 13.4 16.6 16.0 16.6 16.6 16.3 16.6 3000 4000
3.00 16.8 16.2 13.6 16.8 16.2 16.8 16.8 16.5 16.8 2000
2000
1000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
gpm (lpm) 175
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 200 150
0.0 2.89 3.00 3.00 2.60 2.12 2.12 2.38 1.83 1.83
600 (2270) 125
2.5 2.60 2.60 3.00 1.50 1.50 1.83 1.50 1.50 1.50 150
5.0 2.12 2.38 3.00 1.15 1.15 1.15 1.15 1.15 1.15 500 (1890) 100
7.5 1.83 1.83 2.60 0.78 0.78 0.78 0.78 0.39 0.39
100 400 (1510) 75
10.0 1.50 1.50 2.12 0.39 0.39 0.39 0.00 0.00 0.00
12.5 1.15 1.15 1.83 0.00 0.00 0.00 50
50 300 (1140)
15.0 0.78 0.78 1.50
25
17.5 0.39 0.39 1.15
20.0 0.00 0.39 0.78 0 0
22.5 0.00 0.39
25.0 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 260 psi (1790 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 190 11- 191
7'' 7/8 M/L 7.5 Stage
Specifications based on series 24X motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.31 rev/gal 0.082 rev/l
Pressure at Full Load 975 psi 6720 kPa
Torque at Full Load 7,420 lb-ft 10054 Nm
Maximum Weight on Bit 122,000 lbs 550 kN
Maximum Pull to Re-Run Motor 277,000 lbs 1250 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 672,000 lbs 3020 kN
B 6.6 ft (2.01 m)
C 30.3 ft (9.24 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 7.63 in
(194 mm)
E Radius of Offset Pad: 3.63 in (92 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 4 1/2 REG 4 1/2 IF
4 1/2 H-90 5 H-90
200
Common Bottom Connection: 4 1/2 REG 6 5/8 REG
180 600 (2270)
160
Weight: 2770 lbs (1260 kg) 500 (1890)

SPEED : RPM
140
120 400 (1510)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 100
300 (1140)
Setting Stabilizer Stabilizers 80
Hole Size Hole Size Hole Size 60
Deg 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 40
0.39 1.1 1.1 1.1 1.9 2.0 2.4 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.2 2.2 2.2 3.8 3.9 4.3 3.6 3.6 3.6 0
1.15 4.3 3.9 3.2 5.7 5.7 6.1 5.6 5.6 5.6
1.50 6.3 5.8 4.1 7.4 7.4 7.8 7.4 7.4 7.5 10000
1.83 8.2 7.7 5.6 9.0 9.1 9.4 9.0 9.1 9.3 9000 12000
2.12 9.8 9.3 7.2 10.4 10.5 10.8 10.4 10.5 10.8 8000
TORQUE : lb-ft

TORQUE : N.m
10000
2.38 11.3 10.8 8.6 11.7 11.7 12.0 11.7 11.7 12.0 7000
2.60 12.5 12.0 9.8 12.7 12.8 13.1 12.7 12.8 13.1 6000 8000
2.77 13.5 13.0 10.8 13.5 13.6 13.9 13.5 13.6 13.9 5000

FULL LOAD
2.89 14.1 13.6 11.4 14.1 14.2 14.5 14.1 14.2 14.5 6000
4000
2.97 14.6 14.1 11.9 14.6 14.6 14.8 14.6 14.6 14.8 3000 4000
3.00 14.8 14.3 12.0 14.8 14.8 15.0 14.8 14.8 15.0 2000
2000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 280
200
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

240 175

OUTPUT POWER : kW
Deg/100ft 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8 8 1/2 8 3/4 9 7/8
0.0 3.00 3.00 3.00 2.89 2.38 2.38 2.77 2.12 2.12 200 600 (2270) 150
2.5 2.77 3.00 3.00 1.83 1.83 1.83 1.50 1.50 1.50 125
5.0 2.38 2.38 3.00 1.15 1.15 1.50 1.15 1.15 1.15 160 500 (1890)
7.5 1.83 2.12 2.77 0.78 0.78 0.78 0.78 0.78 0.78 100
120 400 (1510)
10.0 1.50 1.50 2.38 0.39 0.39 0.39 0.39 0.00 0.00 75
12.5 1.15 1.15 1.83 0.00 0.00 0.00 80 300 (1140) 50
15.0 0.78 0.78 1.50
40 gpm (lpm) 25
17.5 0.39 0.39 1.15
20.0 0.00 0.00 0.78 0 0
22.5 0.39
25.0 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 260 psi (1790 kPa) @ 500 gpm (1890 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 192 11- 193
7 3/4'' (8") 1/2 H/S 4.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 600 gpm 2270 lpm
Revolutions per Unit Volume 0.70 rev/gal 0.185 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 2,210 lb-ft 2995 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 25.6 ft (7.8 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 100 200 300 400 500 600 700 800 psi
Common Top Connection: 6 5/8 REG 7 H-90
450
Common Bottom Connection: 6 5/8 REG 600 (2270)
400

Weight: 2870 lbs (1300 kg) 350 500 (1890)

SPEED : RPM
300
400 (1510)
Predicted Build Rates - Degrees/100ft (30m) 250
Bend Slick Single Two 200 300 (1140)
Setting Stabilizer Stabilizers
150
Hole Size Hole Size Hole Size
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
100 gpm (lpm)
0.39 1.4 1.2 1.2 2.6 2.9 3.6 1.7 1.7 1.8 50
0.78 2.4 2.4 2.3 4.6 4.9 5.6 4.1 4.1 4.1 0
1.15 4.2 3.5 4.2 6.6 6.9 7.4 6.3 6.3 6.3
1.50 6.4 4.9 4.4 8.4 8.7 9.2 8.4 8.4 8.4 3500
4500
1.83 8.4 6.9 5.4 10.2 10.4 10.9 10.2 10.4 10.4 3000 4000
2.12 10.2 8.7 6.3 11.7 12.0 12.4 11.7 12.0 12.1

TORQUE : N.m
TORQUE : lb-ft

2500 3500
2.38 11.8 10.2 7.1 13.1 13.3 13.7 13.1 13.3 13.7
2.60 13.2 11.6 8.4 14.3 14.5 14.9 14.3 14.5 14.9 3000
2000
2.77 14.2 12.6 9.4 15.2 15.4 15.7 15.2 15.4 15.7 2500
1500 2000

FULL LOAD
2.89 14.9 13.3 10.1 15.8 16.0 16.3 15.8 16.0 16.3
2.97 15.4 13.8 10.5 16.2 16.4 16.7 16.2 16.4 16.7 1000 1500
3.00 15.6 14.0 10.7 16.4 16.6 16.9 16.4 16.6 16.9 1000
500
500
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 180
Hole Size Hole Size Hole Size 160 120

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 600 (2270)
140 100
0.0 3.00 3.00 3.00 2.38 2.38 2.60 2.12 2.12 2.12
120
3.0 2.77 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50
500 (1890) 80
6.0 2.38 2.77 3.00 1.15 1.50 1.50 1.15 1.15 0.78 100
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39 80 60
400 (1510)
12.0 1.50 1.83 2.89 0.39 0.39 0.39 0.00 0.00 0.00 60
15.0 1.15 1.50 2.38 0.00 0.00 40
40 300 (1140)
18.0 0.78 1.15 1.83 20
21.0 0.00 0.78 1.50 20 gpm (lpm)
24.0 0.00 1.15 0 0
27.0 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 approximately 90 psi (620 kPa) @ 500 gpm (1890 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 194 11- 195
7 3/4'' (8") 4/5 M/L 3.6 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.26 rev/gal 0.069 rev/l
Pressure at Full Load 470 psi 3240 kPa
Torque at Full Load 5,160 lb-ft 6992 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
C 23.4 ft (7.13 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000
D Maximum Diameter of Motor at Upset: 8.63 in kPa
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 H-90
250
Common Bottom Connection: 6 5/8 REG

200 900 (3410)


Weight: 2620 lbs (1190 kg)

SPEED : RPM
150 700 (2650)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two
500 (1890)
Setting Stabilizer Stabilizers 100
Hole Size Hole Size Hole Size
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 50 300 (1140)
0.39 1.6 1.3 1.2 2.8 3.2 4.0 1.8 1.8 1.9 gpm (lpm)
0.78 2.6 2.6 2.5 5.0 5.4 6.1 4.3 4.3 4.3 0
1.15 4.6 3.8 4.5 7.1 7.4 8.1 6.7 6.7 6.7
1.50 6.9 5.3 4.8 9.0 9.4 10.0 9.0 9.0 8.9 9000 12000
1.83 9.1 7.4 5.8 10.9 11.2 11.8 10.9 11.1 11.1 8000
2.12 11.0 9.3 6.7 12.5 12.8 13.3 12.5 12.8 12.9 10000
7000

TORQUE : N.m
TORQUE : lb-ft

2.38 12.7 11.0 7.6 14.0 14.2 14.7 14.0 14.2 14.6 6000 8000
2.60 14.2 12.5 9.0 15.2 15.5 15.9 15.2 15.5 15.9
5000
2.77 15.3 13.6 10.1 16.2 16.4 16.8 16.2 16.4 16.8 6000
4000

FULL LOAD
2.89 16.1 14.3 10.8 16.8 17.1 17.5 16.8 17.1 17.5
2.97 16.6 14.9 11.3 17.3 17.5 17.9 17.3 17.5 17.9 3000 4000
3.00 16.8 15.1 11.5 17.5 17.7 18.1 17.5 17.7 18.1 2000
2000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 225
Hole Size Hole Size Hole Size 200 150

OUTPUT POWER : kW
gpm (lpm)
OUTPUT POWER : HP

Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 900 (3410)
175 125
0.0 3.00 3.00 3.00 2.12 2.38 2.60 1.83 1.83 1.83
150
3.0 2.77 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50
100
6.0 2.38 2.77 3.00 1.15 1.15 1.50 0.78 0.78 0.78 125 700 (2650)
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39 100 75
12.0 1.50 1.83 3.00 0.39 0.39 0.39 0.00 0.00 0.00 75 500 (1890) 50
15.0 1.15 1.50 2.60 0.00 0.00 0.00
50
18.0 0.78 1.15 2.12 25
21.0 0.39 0.78 1.83 25
300 (1140)
24.0 0.00 0.39 1.50 0 0
27.0 0.00 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 150 psi (1030 kPa) @ 700 gpm (2650 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 196 11- 197
7 3/4'' (8") 4/5 M/L 5.3 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.26 rev/gal 0.069 rev/l
Pressure at Full Load 690 psi 4750 kPa
Torque at Full Load 7,680 lb-ft 10406 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
C 29 ft (8.84 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 6 5/8 REG 7 H-90
250
Common Bottom Connection: 6 5/8 REG 900 (3410)
200
Weight: 3250 lbs (1470 kg)

SPEED : RPM
700 (2650)
Predicted Build Rates - Degrees/100ft (30m) 150
Bend Slick Single Two 500 (1890)
Setting Stabilizer Stabilizers 100
Hole Size Hole Size Hole Size 300 (1140)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 50
0.39 1.1 1.1 1.1 2.2 2.5 3.1 1.6 1.6 1.6 gpm (lpm)
0.78 2.2 2.2 2.1 4.1 4.4 4.9 3.7 3.7 3.7 0
1.15 3.8 3.2 3.7 6.0 6.2 6.7 5.8 5.8 5.8
1.50 5.7 4.4 4.0 7.7 7.9 8.3 7.7 7.7 7.7 12000 16000
1.83 7.6 6.2 4.9 9.3 9.5 9.9 9.3 9.5 9.5
10000 14000
2.12 9.2 7.8 5.7 10.7 10.9 11.2 10.7 10.9 11.1

TORQUE : N.m
12000
TORQUE : lb-ft

2.38 10.7 9.2 6.4 11.9 12.1 12.5 11.9 12.1 12.5
8000
2.60 11.9 10.5 7.6 13.0 13.2 13.5 13.0 13.2 13.5 10000
2.77 12.8 11.4 8.5 13.8 14.0 14.3 13.8 14.0 14.3
6000 8000
2.89 13.5 12.0 9.1 14.4 14.6 14.9 14.4 14.6 14.9

FULL LOAD
2.97 13.9 12.5 9.5 14.8 15.0 15.2 14.8 15.0 15.2 6000
4000
3.00 14.1 12.7 9.7 15.0 15.1 15.4 15.0 15.1 15.4 4000
2000
2000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

300

OUTPUT POWER : kW
Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 gpm (lpm)
200
0.0 3.00 3.00 3.00 2.38 2.60 2.77 2.12 2.12 2.12 250
2.5 3.00 3.00 3.00 2.12 2.12 2.12 1.83 1.83 1.83
200 900 (3410) 150
5.0 2.60 3.00 3.00 1.50 1.50 1.83 1.15 1.15 1.15
7.5 2.12 2.60 3.00 1.15 1.15 1.15 0.78 0.78 0.78 150 700 (2650)
10.0 1.83 2.12 3.00 0.39 0.78 0.78 0.39 0.39 0.39 100
12.5 1.15 1.83 2.60 0.00 0.00 0.39 0.00 0.00 0.00 100 500 (1890)
15.0 0.78 1.15 2.12 0.00 50
50 300 (1140)
17.5 0.39 0.78 1.83
20.0 0.00 0.39 1.50 0 0
22.5 0.00 0.78
25.0 0.39 1. Total pressure loss through motor with no load is
27.5 0.00 approximately 190 psi (1310 kPa) @ 700 gpm (2650 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 198 11- 199
7 3/4'' (8") 5/6 M/L 5.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.29 rev/gal 0.077 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 5,410 lb-ft 7331 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
C 24 ft (7.32 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 6 5/8 REG 7 H-90
300
Common Bottom Connection: 6 5/8 REG
250 900 (3410)
Weight: 2690 lbs (1220 kg)

SPEED : RPM
770 (2910)
200
Predicted Build Rates - Degrees/100ft (30m) 640 (2420)
Bend Slick Single Two 150 510 (1930)
Setting Stabilizer Stabilizers
100
Hole Size Hole Size Hole Size gpm (lpm)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 50
0.39 1.5 1.3 1.2 2.7 3.1 3.8 1.8 1.8 1.8
0.78 2.5 2.5 2.4 4.9 5.2 5.9 4.3 4.3 4.3 0
1.15 4.5 3.7 4.4 6.9 7.2 7.9 6.6 6.6 6.6
1.50 6.7 5.2 4.7 8.8 9.2 9.7 8.8 8.8 8.8 9000 12000
1.83 8.9 7.3 5.7 10.7 11.0 11.5 10.7 10.9 10.8 8000
2.12 10.8 9.1 6.6 12.3 12.5 13.0 12.3 12.5 12.7 10000
7000
TORQUE : lb-ft

TORQUE : N.m
2.38 12.4 10.8 7.4 13.7 13.9 14.4 13.7 13.9 14.3
6000 8000
2.60 13.9 12.2 8.8 14.9 15.1 15.6 14.9 15.1 15.6
2.77 15.0 13.3 9.8 15.9 16.1 16.5 15.9 16.1 16.5 5000
6000
2.89 15.7 14.0 10.6 16.5 16.7 17.1 16.5 16.7 17.1 4000

FULL LOAD
2.97 16.3 14.5 11.1 17.0 17.2 17.5 17.0 17.2 17.5 3000 4000
3.00 16.4 14.7 11.3 17.1 17.3 17.7 17.1 17.3 17.7
2000
2000
Maximum Adjustable Bend Setting 1000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size
OUTPUT POWER : HP

OUTPUT POWER : kW
300 900 (3410)
Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
200
0.0 3.00 3.00 3.00 2.12 2.38 2.60 1.83 1.83 1.83 250 770 (2910)
3.0 2.77 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50
200 640 (2420) 150
6.0 2.38 2.77 3.00 1.15 1.15 1.50 0.78 0.78 0.78
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39 150
12.0 1.50 1.83 3.00 0.39 0.39 0.39 0.00 0.00 0.00 510 (1930) 100
15.0 1.15 1.50 2.60 0.00 0.00 100
18.0 0.78 1.15 2.12 gpm (lpm) 50
50
21.0 0.39 0.78 1.50
24.0 0.00 0.39 1.15 0 0
27.0 0.00 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 180 psi (1240 kPa) @ 770 gpm (2910 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 200 11- 201
7 3/4'' (8") 6/7 M/L 4.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.17 rev/gal 0.045 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 7,680 lb-ft 10406 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 27.2 ft (8.29 m)
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 H-90
180
Common Bottom Connection: 6 5/8 REG
160
900 (3410)
Weight: 3050 lbs (1380 kg) 140

SPEED : RPM
120 700 (2650)
Predicted Build Rates - Degrees/100ft (30m) 100
Bend Slick Single Two 80 500 (1890)
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size 300 (1140)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
40
0.39 1.2 1.1 1.1 2.4 2.7 3.3 1.7 1.7 1.7 20 gpm (lpm)
0.78 2.3 2.3 2.2 4.4 4.7 5.2 3.9 3.9 3.9 0
1.15 4.0 3.3 3.9 6.3 6.5 7.1 6.1 6.1 6.1
1.50 6.1 4.7 4.2 8.1 8.3 8.8 8.1 8.1 8.1 12000 16000
1.83 8.0 6.6 5.2 9.7 10.0 10.4 9.7 10.0 10.0
10000 14000
2.12 9.7 8.3 6.0 11.2 11.4 11.8 11.2 11.4 11.6
12000

TORQUE : N.m
TORQUE : lb-ft

2.38 11.2 9.8 6.7 12.5 12.7 13.1 12.5 12.7 13.1
8000
2.60 12.5 11.0 8.0 13.7 13.8 14.2 13.7 13.8 14.2 10000
2.77 13.5 12.0 8.9 14.5 14.7 15.0 14.5 14.7 15.0
6000 8000
2.89 14.2 12.7 9.6 15.1 15.3 15.6 15.1 15.3 15.6
2.97 14.7 13.2 10.1 15.5 15.7 16.0 15.5 15.7 16.0 FULL LOAD 6000
4000
3.00 14.9 13.4 10.2 15.7 15.9 16.2 15.7 15.9 16.2 4000
2000
2000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 300
Hole Size Hole Size Hole Size 200
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 250 gpm (lpm) 175
0.0 3.00 3.00 3.00 2.38 2.38 2.60 2.12 2.12 2.12
200 150
3.0 2.89 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50
900 (3410) 125
6.0 2.38 2.77 3.00 1.15 1.50 1.50 1.15 1.15 1.15
150
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39 700 (2650) 100
12.0 1.50 1.83 2.77 0.39 0.39 0.39 0.00 0.00 0.00 100 75
15.0 0.78 1.50 2.38 0.00 500 (1890)
50
18.0 0.39 0.78 1.83 50
21.0 0.00 0.39 1.50 300 (1140) 25
24.0 0.00 0.78 0 0
27.0 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 195 psi (1340 kPa) @ 700 gpm (2650 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 202 11- 203
7 3/4'' (8") 7/8 M/L 2.0 Stage (Air)
Specifications based on series 24 motor.
Maximum Pump Rate 1,100 gpm 4160 lpm
Revolutions per Unit Volume 0.08 rev/gal 0.020 rev/l
Pressure at Full Load 260 psi 1790 kPa
Torque at Full Load 9,040 lb-ft 12249 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
C 27.4 ft (8.35 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 500 1000 1500 2000 2500 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 100 200 300 400 psi
Common Top Connection: 6 5/8 REG 7 H-90
100
Common Bottom Connection: 6 5/8 REG
90
1100 (4160)
80
Weight: 3070 lbs (1390 kg)

SPEED : RPM
70 950 (3600)

Predicted Build Rates - Degrees/100ft (30m) 60 800 (3030)


Bend Slick Single Two 50 650 (2460)
Setting Stabilizer Stabilizers 40
Hole Size Hole Size Hole Size 30
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 20
0.39 1.1 1.1 1.1 2.4 2.7 3.3 1.7 1.7 1.7 10 gpm (lpm)
0.78 2.3 2.3 2.2 4.4 4.6 5.2 3.9 3.9 3.9 0
1.15 4.0 3.3 3.9 6.2 6.5 7.0 6.0 6.0 6.0
1.50 6.0 4.6 4.2 8.0 8.3 8.7 8.0 8.0 8.0 14000
18000
1.83 8.0 6.5 5.2 9.7 9.9 10.4 9.7 9.9 9.9
12000
2.12 9.7 8.2 6.0 11.2 11.4 11.8 11.2 11.4 11.6 15000

TORQUE : N.m
TORQUE : lb-ft

2.38 11.2 9.7 6.7 12.5 12.7 13.1 12.5 12.7 13.1 10000
2.60 12.5 11.0 7.9 13.6 13.8 14.1 13.6 13.8 14.1 12000
2.77 13.5 12.0 8.9 14.5 14.6 15.0 14.5 14.6 15.0 8000
2.89 14.2 12.6 9.6 15.1 15.2 15.5 15.1 15.2 15.5 9000
6000
2.97 14.6 13.1 10.0 15.5 15.6 15.9 15.5 15.6 15.9 FULL LOAD
4000 6000
3.00 14.8 13.3 10.2 15.6 15.8 16.1 15.6 15.8 16.1
2000 3000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 200
140
Hole Size Hole Size Hole Size 180

OUTPUT POWER : kW
OUTPUT POWER : HP

1100 (4160)
Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 160 120
0.0 3.00 3.00 3.00 2.38 2.38 2.60 2.12 2.12 2.12 140 950 (3600) 100
3.0 2.89 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50 120
6.0 2.38 2.77 3.00 1.15 1.50 1.50 1.15 1.15 1.15 800 (3030) 80
100
9.0 1.83 2.38 3.00 0.78 0.78 0.78 0.39 0.39 0.39
80 650 (2460) 60
12.0 1.50 1.83 2.77 0.39 0.39 0.39 0.00 0.00 0.00
15.0 0.78 1.50 2.38 0.00 60 40
18.0 0.39 0.78 1.83 40
gpm (lpm) 20
21.0 0.00 0.39 1.50 20
24.0 0.00 0.78 0 0
27.0 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 90 psi (620 kPa) @ 950 gpm (3600 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 204 11- 205
7 3/4'' (8") 7/8 M/L 3.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.17 rev/gal 0.045 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 6,220 lb-ft 8428 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 23.4 ft (7.13 m)
kPa
0 1000 2000 3000 4000
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 6 5/8 REG 7 H-90
160
Common Bottom Connection: 6 5/8 REG
140 900 (3410)

Weight: 2620 lbs (1190 kg) 120

SPEED : RPM
700 (2650)
100
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 80 500 (1890)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40 300 (1140)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
0.39 1.6 1.3 1.2 2.8 3.2 4.0 1.8 1.8 1.9 20
gpm (lpm)
0.78 2.6 2.6 2.5 5.0 5.4 6.1 4.3 4.3 4.3 0
1.15 4.6 3.8 4.5 7.1 7.4 8.1 6.7 6.7 6.7
1.50 6.9 5.3 4.8 9.0 9.4 10.0 9.0 9.0 8.9 10000
1.83 9.1 7.4 5.8 10.9 11.2 11.8 10.9 11.1 11.1 12000
2.12 11.0 9.3 6.7 12.5 12.8 13.3 12.5 12.8 12.9 8000
TORQUE : lb-ft

10000

TORQUE : N.m
2.38 12.7 11.0 7.6 14.0 14.2 14.7 14.0 14.2 14.6
2.60 14.2 12.5 9.0 15.2 15.5 15.9 15.2 15.5 15.9 6000 8000
2.77 15.3 13.6 10.1 16.2 16.4 16.8 16.2 16.4 16.8
2.89 16.1 14.3 10.8 16.8 17.1 17.5 16.8 17.1 17.5 6000
4000 FULL LOAD
2.97 16.6 14.9 11.3 17.3 17.5 17.9 17.3 17.5 17.9
3.00 16.8 15.1 11.5 17.5 17.7 18.1 17.5 17.7 18.1 4000
2000
2000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 200
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
175 gpm (lpm)
OUTPUT POWER : HP

Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
900 (3410) 125
0.0 3.00 3.00 3.00 2.12 2.38 2.60 1.83 1.83 1.83 150
100
3.0 2.77 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50 125 700 (2650)
6.0 2.38 2.77 3.00 1.15 1.15 1.50 0.78 0.78 0.78
100 75
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39
12.0 1.50 1.83 3.00 0.39 0.39 0.39 0.00 0.00 0.00 75 500 (1890) 50
15.0 1.15 1.50 2.60 0.00 0.00 0.00 50
18.0 0.78 1.15 2.12 25
25 300 (1140)
21.0 0.39 0.78 1.83
24.0 0.00 0.39 1.50 0 0
27.0 0.00 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 180 psi (1240 kPa) @ 700 gpm (2650 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 206 11- 207
7 3/4'' (8") 7/8 M/L 4.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.16 rev/gal 0.042 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 8,660 lb-ft 11734 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 27 ft (8.23 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 100 200 300 400 500 600 700 800 psi
Common Top Connection: 6 5/8 REG 7 H-90
160
Common Bottom Connection: 6 5/8 REG
140 900 (3410)
Weight:

SPEED : RPM
3030 lbs (1370 kg) 120
700 (2650)
100
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 80
500 (1890)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40 300 (1140)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
0.39 1.2 1.1 1.1 2.4 2.7 3.4 1.7 1.7 1.7 20 gpm (lpm)
0.78 2.3 2.3 2.2 4.4 4.7 5.3 3.9 3.9 3.9 0
1.15 4.1 3.4 4.0 6.3 6.6 7.1 6.1 6.1 6.1
1.50 6.1 4.7 4.3 8.1 8.4 8.8 8.1 8.1 8.1 14000
1.83 8.1 6.6 5.2 9.8 10.0 10.5 9.8 10.0 10.0 17500
12000
2.12 9.8 8.3 6.0 11.3 11.5 11.9 11.3 11.5 11.7 15000

TORQUE : N.m
TORQUE : lb-ft

2.38 11.3 9.8 6.8 12.6 12.8 13.2 12.6 12.8 13.2 10000
2.60 12.6 11.1 8.0 13.7 13.9 14.3 13.7 13.9 14.3 12500
2.77 13.6 12.1 9.0 14.6 14.8 15.1 14.6 14.8 15.1 8000
10000
2.89 14.3 12.8 9.7 15.2 15.4 15.7 15.2 15.4 15.7 6000
2.97 14.8 13.3 10.1 15.6 15.8 16.1 15.6 15.8 16.1 7500

FULL LOAD
3.00 15.0 13.4 10.3 15.8 16.0 16.3 15.8 16.0 16.3 4000 5000
2000 2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size gpm (lpm) 900 (3410)
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 200 150
0.0 3.00 3.00 3.00 2.38 2.38 2.60 2.12 2.12 2.12
125
3.0 2.77 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50 150 700 (2650)
6.0 2.38 2.77 3.00 1.15 1.50 1.50 1.15 1.15 1.15 100
9.0 1.83 2.38 3.00 0.78 0.78 1.15 0.39 0.39 0.39
100 75
12.0 1.50 1.83 2.77 0.39 0.39 0.39 0.00 0.00 0.00 500 (1890)
15.0 1.15 1.50 2.38 0.00 50
18.0 0.39 0.78 1.83 50
25
21.0 0.00 0.39 1.50 300 (1140)
24.0 0.00 0.78 0 0
27.0 0.39
30.0 0.00 1. Total pressure loss through motor with no load is
33.0 approximately 230 psi (1580 kPa) @ 700 gpm (2650 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 208 11- 209
8" 6/7 M/L 5.0 Stage
Specifications based on series 24 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.17 rev/gal 0.045 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 9,590 lb-ft 12994 Nm
Maximum Weight on Bit 142,000 lbs 640 kN
Maximum Pull to Re-Run Motor 349,000 lbs 1570 kN
A 2.3 ft (0.7 m) Pull to Yield Motor 775,000 lbs 3490 kN
B 6.7 ft (2.04 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 30.9 ft (9.42 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 8.63 in
(219 mm)
E Radius of Offset Pad: 4.13 in (105 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 6 5/8 REG 7 H-90
180
Common Bottom Connection: 6 5/8 REG
160
900 (3410)
Weight: 3690 lbs (1670 kg) 140

SPEED : RPM
120 700 (2650)
Predicted Build Rates - Degrees/100ft (30m) 100
Bend Slick Single Two 80 500 (1890)
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size
40 300 (1140)
Deg 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
0.39 1.0 1.0 1.0 2.0 2.3 2.8 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.1 2.1 2.0 3.8 4.1 4.5 3.6 3.6 3.6 0
1.15 3.7 3.0 3.5 5.6 5.8 6.2 5.5 5.5 5.5
1.50 5.6 4.3 3.8 7.2 7.4 7.8 7.2 7.4 7.3 16000
1.83 7.4 6.0 4.7 8.7 8.9 9.3 8.7 8.9 9.1 20000
14000
2.12 8.9 7.6 5.4 10.1 10.3 10.6 10.1 10.3 10.6 17500
12000
TORQUE : lb-ft

TORQUE : N.m
2.38 10.3 8.9 6.2 11.3 11.5 11.8 11.3 11.5 11.8 15000
2.60 11.4 10.1 7.3 12.3 12.5 12.8 12.3 12.5 12.8 10000
12500
2.77 12.3 11.0 8.2 13.1 13.3 13.5 13.1 13.3 13.5
8000
2.89 13.0 11.6 8.8 13.7 13.8 14.1 13.7 13.8 14.1 10000

FULL LOAD
2.97 13.4 12.0 9.2 14.1 14.2 14.5 14.1 14.2 14.5 6000 7500
3.00 13.5 12.2 9.4 14.2 14.3 14.6 14.2 14.3 14.6 4000 5000
2000 2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size gpm (lpm)

OUTPUT POWER : kW
OUTPUT POWER : HP

300 900 (3410)


Deg/100ft 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4 9 7/8 10 5/8 12 1/4
200
0.0 3.00 3.00 3.00 2.12 2.12 2.38 1.83 1.83 1.83 250
2.5 2.77 3.00 3.00 1.50 1.50 1.83 1.50 1.50 1.50
200 700 (2650) 150
5.0 2.38 2.77 3.00 1.15 1.15 1.15 0.78 0.78 0.78
7.5 1.83 2.38 3.00 0.39 0.78 0.78 0.39 0.39 0.39 150
10.0 1.50 1.83 2.77 0.00 0.00 0.39 0.00 0.00 0.00 500 (1890) 100
12.5 1.15 1.50 2.38 100
15.0 0.78 1.15 1.83 50
50 300 (1140)
17.5 0.00 0.39 1.50
20.0 0.00 1.15 0 0
22.5 0.39
25.0 0.00 1. Total pressure loss through motor with no load is
27.5 approximately 195 psi (1340 kPa) @ 700 gpm (2650 lpm).
30.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 210 11- 211
9 5/8'' 1/2 H/S 4.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 900 gpm 3410 lpm
Revolutions per Unit Volume 0.46 rev/gal 0.122 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 3,410 lb-ft 4621 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
C 27 ft (8.23 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
450
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
400 900 (3410)

Weight: 4670 lbs (2120 kg) 350 770 (2910)

SPEED : RPM
300
640 (2420)
Predicted Build Rates - Degrees/100ft (30m) 250
Bend Slick Single Two 510 (1930)
200
Setting Stabilizer Stabilizers
150
Hole Size Hole Size Hole Size
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
100
0.39 1.2 1.1 1.1 2.6 3.6 4.5 1.7 1.7 1.7 50 gpm (lpm)
0.78 2.3 2.2 2.1 4.6 5.5 6.3 3.9 3.9 3.9 0
1.15 3.4 3.3 3.1 6.4 7.2 8.0 6.1 6.0 6.0
1.50 5.3 4.2 4.1 8.1 8.9 9.6 8.1 8.0 8.0 6000 8000
1.83 7.3 5.2 4.9 9.8 10.5 11.1 9.8 9.9 9.9 7000
5000
2.12 9.0 6.0 5.7 11.2 11.9 12.4 11.2 11.6 11.5

TORQUE : N.m
6000
TORQUE : lb-ft

2.38 10.5 6.7 6.4 12.5 13.1 13.6 12.5 13.1 13.0 4000
2.60 11.8 7.5 7.0 13.6 14.2 14.7 13.6 14.2 14.2 5000
2.77 12.8 8.5 7.5 14.4 15.0 15.4 14.4 15.0 15.2 3000 4000
2.89 13.5 9.2 7.8 15.0 15.6 16.0 15.0 15.6 15.9
2.97 14.0 9.6 8.0 15.4 15.9 16.4 15.4 15.9 16.3 2000 FULL LOAD 3000

3.00 14.1 9.8 8.1 15.6 16.1 16.5 15.6 16.1 16.5 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size 225
OUTPUT POWER : HP

OUTPUT POWER : kW
Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 900 (3410) 150
200
0.0 2.89 3.00 3.00 2.12 2.38 2.77 1.83 1.83 1.83 175 125
3.5 2.38 3.00 3.00 1.50 1.83 2.12 1.15 1.15 1.15 150 770 (2910)
7.0 1.83 3.00 3.00 0.78 1.15 1.50 0.39 0.39 0.39 100
125
10.5 1.15 2.77 3.00 0.39 0.39 0.78 0.00 0.00 0.00 640 (2420)
100 75
14.0 0.78 2.12 3.00 0.00 0.00
17.5 0.39 1.50 3.00 75 510 (1930) 50
21.0 0.00 1.15 2.60 50
gpm (lpm) 25
24.5 0.78 2.12 25
28.0 0.00 1.50 0 0
31.5 1.15
35.0 0.39 1. Total pressure loss through motor with no load is
38.5 0.00 approximately 170 psi (1170 kPa) @ 770 gpm (2910 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 212 11- 213
9 5/8'' 2/3 M/L 7.5 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.49 rev/gal 0.129 rev/l
Pressure at Full Load 975 psi 6720 kPa
Torque at Full Load 5,490 lb-ft 7439 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 28.56 ft (8.71 m)
0 2000 4000 6000 8000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 1000 1200 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
700
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
600 1200 (4540)
Weight: 4930 lbs (2240 kg)

SPEED : RPM
500 1000 (3790)
Predicted Build Rates - Degrees/100ft (30m) 400 800 (3030)
Bend Slick Single Two
300 600 (2270)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 200
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
100 gpm (lpm)
0.39 1.1 1.1 1.0 2.5 3.3 4.1 1.6 1.6 1.7
0.78 2.2 2.1 2.0 4.3 5.1 5.9 3.8 3.8 3.8 0
1.15 3.2 3.1 3.0 6.1 6.8 7.5 5.8 5.8 5.8
1.50 5.1 4.0 3.9 7.8 8.4 9.1 7.7 7.7 7.7 7000
9000
1.83 6.9 4.9 4.7 9.3 10.0 10.5 9.3 9.5 9.5 6000 8000
2.12 8.5 5.7 5.5 10.7 11.3 11.8 10.7 11.1 11.0

TORQUE : N.m
7000
TORQUE : lb-ft

2.38 10.0 6.4 6.1 11.9 12.5 13.0 11.9 12.5 12.4 5000
2.60 11.2 7.2 6.7 13.0 13.5 13.9 13.0 13.5 13.6 6000
4000
2.77 12.1 8.1 7.1 13.8 14.3 14.7 13.8 14.3 14.6 5000

FULL LOAD
2.89 12.8 8.7 7.5 14.4 14.8 15.2 14.4 14.8 15.2 3000 4000
2.97 13.3 9.2 7.7 14.7 15.2 15.6 14.7 15.2 15.6 2000 3000
3.00 13.4 9.3 7.7 14.9 15.3 15.7 14.9 15.3 15.7 2000
1000
1000
Maximum Adjustable Bend Setting 0 0
For Rotary Drilling - Degrees
Hole Slick Single Two
Curvature Stabilizer Stabilizer 700
500
Hole Size Hole Size Hole Size gpm (lpm)

OUTPUT POWER : kW
450
OUTPUT POWER : HP

600
Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
400
0.0 3.00 3.00 3.00 2.12 2.38 2.77 1.83 1.83 1.83 500
1200 (4540) 350
3.5 2.38 3.00 3.00 1.50 1.83 2.12 1.15 1.15 1.15
400 300
7.0 1.83 3.00 3.00 0.78 1.15 1.50 0.78 0.39 0.39 1000 (3790)
10.5 1.15 2.60 3.00 0.39 0.39 0.78 0.00 0.00 0.00 250
300
14.0 0.78 2.12 3.00 0.00 0.00 800 (3030) 200
17.5 0.39 1.50 3.00 200 600 (2270) 150
21.0 0.78 2.38 100
100
24.5 0.39 1.83 50
28.0 0.00 1.15 0 0
31.5 0.78
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 170 psi (1170 kPa) @ 1000 gpm (3790 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 214 11- 215
9 5/8'' 3/4 M/L 4.5 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.23 rev/gal 0.061 rev/l
Pressure at Full Load 590 psi 4070 kPa
Torque at Full Load 7,450 lb-ft 10095 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
C 25.9 ft (7.89 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
300
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
250 1200 (4540)
Weight: 4480 lbs (2030 kg)

SPEED : RPM
1000 (3790)
200
Predicted Build Rates - Degrees/100ft (30m) 800 (3030)
Bend Slick Single Two 150
Setting Stabilizer Stabilizers 600 (2270)
100
Hole Size Hole Size Hole Size
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 50 gpm (lpm)
0.39 1.2 1.1 1.1 2.7 3.7 4.7 1.7 1.7 1.8
0.78 2.4 2.3 2.2 4.7 5.7 6.5 4.0 4.0 4.0 0
1.15 3.5 3.3 3.2 6.6 7.5 8.2 6.2 6.2 6.2
1.50 5.5 4.4 4.2 8.4 9.2 9.9 8.3 8.2 8.2 12000 16000
1.83 7.5 5.3 5.1 10.0 10.8 11.4 10.0 10.2 10.1
10000 14000
2.12 9.2 6.1 5.9 11.5 12.2 12.8 11.5 11.9 11.8
12000

TORQUE : N.m
TORQUE : lb-ft

2.38 10.8 6.9 6.6 12.8 13.5 14.0 12.8 13.4 13.3
8000
2.60 12.1 7.7 7.2 13.9 14.5 15.1 13.9 14.5 14.6 10000
2.77 13.2 8.7 7.7 14.8 15.4 15.9 14.8 15.4 15.6
6000 8000
2.89 13.9 9.4 8.0 15.4 16.0 16.4 15.4 16.0 16.2

FULL LOAD
2.97 14.4 9.9 8.2 15.8 16.4 16.8 15.8 16.4 16.7 6000
4000
3.00 14.5 10.1 8.3 16.0 16.5 16.9 16.0 16.5 16.9 4000
2000
2000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

300
Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 1200 (4540) 200
0.0 2.89 3.00 3.00 2.12 2.38 2.77 1.83 1.83 1.83 250
3.5 2.38 3.00 3.00 1.50 1.83 2.12 1.15 1.15 1.15 1000 (3790)
200 150
7.0 1.83 3.00 3.00 0.78 1.15 1.50 0.39 0.39 0.39
10.5 1.50 2.77 3.00 0.39 0.39 0.78 0.00 0.00 0.00 800 (3030)
150
14.0 0.78 2.12 3.00 0.00 0.39 100
100 600 (2270)
17.5 0.39 1.83 3.00
21.0 0.00 1.15 2.77 50
50
24.5 0.78 2.12 gpm (lpm)
28.0 0.39 1.83 0 0
31.5 1.15
35.0 0.78 1. Total pressure loss through motor with no load is
38.5 0.39 approximately 160 psi (1100 kPa) @ 1000 gpm (3790 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 216 11- 217
9 5/8'' 3/4 M/L 6.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.22 rev/gal 0.058 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 10,170 lb-ft 13780 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 30.3 ft (9.24 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
0 200 400 600 800 1000 psi
E Radius of Offset Pad: 5 in (127 mm)
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
300
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
1200 (4540)
250
Weight: 5240 lbs (2370 kg)

SPEED : RPM
1000 (3790)
200
Predicted Build Rates - Degrees/100ft (30m) 800 (3030)
Bend Slick Single Two 150
600 (2270)
Setting Stabilizer Stabilizers
100
Hole Size Hole Size Hole Size
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 50
0.39 1.0 1.0 1.0 2.3 3.1 3.9 1.6 1.6 1.6 gpm (lpm)
0.78 2.1 2.0 1.9 4.1 4.8 5.5 3.6 3.6 3.6 0
1.15 3.1 3.0 2.8 5.8 6.5 7.1 5.6 5.6 5.6
1.50 4.8 3.9 3.7 7.4 8.0 8.6 7.4 7.4 7.4 14000
1.83 6.6 4.7 4.5 8.9 9.5 10.0 8.9 9.1 9.1 17500
12000
2.12 8.1 5.5 5.2 10.3 10.8 11.3 10.3 10.7 10.6 15000

TORQUE : N.m
TORQUE : lb-ft

2.38 9.5 6.1 5.9 11.5 11.9 12.4 11.5 11.9 12.0 10000
2.60 10.7 6.9 6.4 12.5 12.9 13.3 12.5 12.9 13.1 12500
2.77 11.6 7.7 6.9 13.2 13.7 14.1 13.2 13.7 14.0 8000
10000
2.89 12.2 8.3 7.1 13.8 14.2 14.6 13.8 14.2 14.6 6000

FULL LOAD
2.97 12.7 8.8 7.3 14.2 14.6 14.9 14.2 14.6 14.9 7500
3.00 12.8 8.9 7.4 14.3 14.7 15.0 14.3 14.7 15.0 4000 5000
2000 2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 500
gpm (lpm) 350
Hole Size Hole Size Hole Size 450

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 400 300
0.0 3.00 3.00 3.00 2.38 2.60 2.77 2.12 1.83 1.83 350 1200 (4540) 250
3.0 2.60 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.15 300
6.0 2.12 3.00 3.00 1.15 1.15 1.50 0.78 0.78 0.78 1000 (3790) 200
250
9.0 1.50 2.77 3.00 0.39 0.78 0.78 0.39 0.00 0.00
200 800 (3030) 150
12.0 1.15 2.38 3.00 0.00 0.00 0.39
15.0 0.39 1.83 3.00 150 100
600 (2270)
18.0 0.00 1.15 2.60 100
50
21.0 0.78 2.12 50
24.0 0.39 1.50 0 0
27.0 0.00 1.15
30.0 0.78 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 180 psi (1240 kPa) @ 1000 gpm (3790 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 218 11- 219
9 5/8'' 5/6 M/L 3.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.11 rev/gal 0.029 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 9,450 lb-ft 12805 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
C 25.9 ft (7.89 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
140
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
1200 (4540)
120
Weight: 4480 lbs (2030 kg)

SPEED : RPM
100 1000 (3790)

Predicted Build Rates - Degrees/100ft (30m) 80 800 (3030)


Bend Slick Single Two
60 600 (2270)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 40
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 gpm (lpm)
20
0.39 1.2 1.1 1.1 2.7 3.7 4.7 1.7 1.7 1.8
0.78 2.4 2.3 2.2 4.7 5.7 6.5 4.0 4.0 4.0 0
1.15 3.5 3.3 3.2 6.6 7.5 8.2 6.2 6.2 6.2
1.50 5.5 4.4 4.2 8.4 9.2 9.9 8.3 8.2 8.2 16000
1.83 7.5 5.3 5.1 10.0 10.8 11.4 10.0 10.2 10.1 20000
14000
2.12 9.2 6.1 5.9 11.5 12.2 12.8 11.5 11.9 11.8 17500
12000
TORQUE : lb-ft

TORQUE : N.m
2.38 10.8 6.9 6.6 12.8 13.5 14.0 12.8 13.4 13.3 15000
2.60 12.1 7.7 7.2 13.9 14.5 15.1 13.9 14.5 14.6 10000
12500
2.77 13.2 8.7 7.7 14.8 15.4 15.9 14.8 15.4 15.6
8000
2.89 13.9 9.4 8.0 15.4 16.0 16.4 15.4 16.0 16.2 10000
6000 FULL LOAD
2.97 14.4 9.9 8.2 15.8 16.4 16.8 15.8 16.4 16.7 7500
3.00 14.5 10.1 8.3 16.0 16.5 16.9 16.0 16.5 16.9 4000 5000
2000 2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 250
175
Hole Size Hole Size Hole Size 225 1200 (4540)

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 200 150
0.0 2.89 3.00 3.00 2.12 2.38 2.77 1.83 1.83 1.83 175 1000 (3790) 125
3.5 2.38 3.00 3.00 1.50 1.83 2.12 1.15 1.15 1.15 150
7.0 1.83 3.00 3.00 0.78 1.15 1.50 0.39 0.39 0.39 100
125 800 (3030)
10.5 1.50 2.77 3.00 0.39 0.39 0.78 0.00 0.00 0.00
100 75
14.0 0.78 2.12 3.00 0.00 0.39
17.5 0.39 1.83 3.00 75 50
600 (2270)
21.0 0.00 1.15 2.77 50
25
24.5 0.78 2.12 25 gpm (lpm)
28.0 0.39 1.83 0 0
31.5 1.15
35.0 0.78 1. Total pressure loss through motor with no load is
38.5 0.39 approximately 160 psi (1100 kPa) @ 1000 gpm (3790 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 220 11- 221
9 5/8'' 5/6 M/L 4.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.12 rev/gal 0.032 rev/l
Pressure at Full Load 520 psi 3580 kPa
Torque at Full Load 12,580 lb-ft 17046 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
C 30.3 ft (9.24 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
140
Common Bottom Connection: 6 5/8 REG 7 5/8 REG 1200 (4540)
120
Weight: 5240 lbs (2370 kg) 1000 (3790)

SPEED : RPM
100
800 (3030)
Predicted Build Rates - Degrees/100ft (30m) 80
Bend Slick Single Two 600 (2270)
60
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 40
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
20 gpm (lpm)
0.39 1.0 1.0 1.0 2.3 3.1 3.9 1.6 1.6 1.6
0.78 2.1 2.0 1.9 4.1 4.8 5.5 3.6 3.6 3.6 0
1.15 3.1 3.0 2.8 5.8 6.5 7.1 5.6 5.6 5.6
1.50 4.8 3.9 3.7 7.4 8.0 8.6 7.4 7.4 7.4 20000
1.83 6.6 4.7 4.5 8.9 9.5 10.0 8.9 9.1 9.1 25000
17500
2.12 8.1 5.5 5.2 10.3 10.8 11.3 10.3 10.7 10.6
15000 20000

TORQUE : N.m
TORQUE : lb-ft

2.38 9.5 6.1 5.9 11.5 11.9 12.4 11.5 11.9 12.0
2.60 10.7 6.9 6.4 12.5 12.9 13.3 12.5 12.9 13.1 12500
2.77 11.6 7.7 6.9 13.2 13.7 14.1 13.2 13.7 14.0 15000
10000
2.89 12.2 8.3 7.1 13.8 14.2 14.6 13.8 14.2 14.6
FULL LOAD
2.97 12.7 8.8 7.3 14.2 14.6 14.9 14.2 14.6 14.9 7500 10000
3.00 12.8 8.9 7.4 14.3 14.7 15.0 14.3 14.7 15.0 5000
5000
2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
1200 (4540)
OUTPUT POWER : HP

300
Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
200
0.0 3.00 3.00 3.00 2.38 2.60 2.77 2.12 1.83 1.83 250
3.0 2.60 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.15 1000 (3790)
200 150
6.0 2.12 3.00 3.00 1.15 1.15 1.50 0.78 0.78 0.78
9.0 1.50 2.77 3.00 0.39 0.78 0.78 0.39 0.00 0.00 150 800 (3030)
12.0 1.15 2.38 3.00 0.00 0.00 0.39 100
15.0 0.39 1.83 3.00 100
600 (2270)
18.0 0.00 1.15 2.60 50
50 gpm (lpm)
21.0 0.78 2.12
24.0 0.39 1.50 0 0
27.0 0.00 1.15
30.0 0.78 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 230 psi (1580 kPa) @ 1000 gpm (3790 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 222 11- 223
9 5/8'' 6/7 M/L 5.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.13 rev/gal 0.034 rev/l
Pressure at Full Load 650 psi 4480 kPa
Torque at Full Load 12,040 lb-ft 16314 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
C 28.4 ft (8.66 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
160
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
1200 (4540)
140
Weight: 4910 lbs (2230 kg) 120

SPEED : RPM
1000 (3790)
100
Predicted Build Rates - Degrees/100ft (30m) 800 (3030)
Bend Slick Single Two 80
600 (2270)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
0.39 1.1 1.1 1.0 2.5 3.3 4.1 1.6 1.6 1.7 20 gpm (lpm)
0.78 2.2 2.1 2.0 4.3 5.1 5.9 3.8 3.8 3.8 0
1.15 3.2 3.1 3.0 6.1 6.8 7.5 5.8 5.8 5.8
1.50 5.1 4.0 3.9 7.8 8.4 9.1 7.7 7.7 7.7 15000 20000
1.83 6.9 4.9 4.7 9.3 10.0 10.5 9.3 9.5 9.5
2.12 8.5 5.7 5.5 10.7 11.3 11.8 10.7 11.1 11.0 12500
16000
TORQUE : lb-ft

TORQUE : N.m
2.38 10.0 6.4 6.1 11.9 12.5 13.0 11.9 12.5 12.4
10000
2.60 11.2 7.2 6.7 13.0 13.5 13.9 13.0 13.5 13.6
12000
2.77 12.1 8.1 7.1 13.8 14.3 14.7 13.8 14.3 14.6
7500
2.89 12.8 8.7 7.5 14.4 14.8 15.2 14.4 14.8 15.2
8000

FULL LOAD
2.97 13.3 9.2 7.7 14.7 15.2 15.6 14.7 15.2 15.6 5000
3.00 13.4 9.3 7.7 14.9 15.3 15.7 14.9 15.3 15.7
2500 4000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 350
250
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
OUTPUT POWER : HP

300
Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
1200 (4540) 200
0.0 3.00 3.00 3.00 2.12 2.38 2.77 1.83 1.83 1.83 250
3.5 2.38 3.00 3.00 1.50 1.83 2.12 1.15 1.15 1.15 1000 (3790)
200 150
7.0 1.83 3.00 3.00 0.78 1.15 1.50 0.78 0.39 0.39
10.5 1.15 2.60 3.00 0.39 0.39 0.78 0.00 0.00 0.00 150 800 (3030)
14.0 0.78 2.12 3.00 0.00 0.00 100
100 600 (2270)
17.5 0.39 1.50 3.00
21.0 0.78 2.38 50
50
24.5 0.39 1.83 gpm (lpm)
28.0 0.00 1.15 0 0
31.5 0.78
35.0 0.00 1. Total pressure loss through motor with no load is
38.5 approximately 170 psi (1170 kPa) @ 1000 gpm (3790 lpm).
42.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 224 11- 225
9 5/8'' 6/7 M/L 6.0 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.13 rev/gal 0.034 rev/l
Pressure at Full Load 780 psi 5370 kPa
Torque at Full Load 14,450 lb-ft 19580 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 32.06 ft (9.77 m)
0 1000 2000 3000 4000 5000 6000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
160
Common Bottom Connection: 6 5/8 REG 7 5/8 REG 1200 (4540)
140
Weight: 5540 lbs (2510 kg) 120 1000 (3790)

SPEED : RPM
100 800 (3030)
Predicted Build Rates - Degrees/100ft (30m)
Bend Slick Single Two 80
600 (2270)
Setting Stabilizer Stabilizers 60
Hole Size Hole Size Hole Size 40
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2
0.39 1.0 1.0 0.9 2.2 2.9 3.6 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.0 1.9 1.8 3.9 4.6 5.2 3.5 3.5 3.5 0
1.15 2.9 2.8 2.7 5.5 6.2 6.7 5.3 5.3 5.3
1.50 4.6 3.7 3.6 7.1 7.6 8.2 7.1 7.1 7.1 20000
1.83 6.3 4.5 4.3 8.5 9.1 9.5 8.5 8.8 8.7 18000 25000
2.12 7.7 5.2 5.0 9.8 10.3 10.7 9.8 10.2 10.2 16000
TORQUE : lb-ft

20000

TORQUE : N.m
2.38 9.1 5.9 5.6 11.0 11.4 11.8 11.0 11.4 11.5 14000
2.60 10.2 6.5 6.2 11.9 12.3 12.7 11.9 12.3 12.6 12000
2.77 11.0 7.4 6.6 12.7 13.1 13.4 12.7 13.1 13.4 15000
10000
2.89 11.7 8.0 6.8 13.2 13.6 13.9 13.2 13.6 13.9
8000

FULL LOAD
2.97 12.1 8.4 7.0 13.6 13.9 14.2 13.6 13.9 14.2 10000
3.00 12.2 8.5 7.1 13.7 14.1 14.4 13.7 14.1 14.4 6000
4000 5000
Maximum Adjustable Bend Setting 2000
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 400
Hole Size Hole Size Hole Size gpm (lpm)

OUTPUT POWER : kW
350
OUTPUT POWER : HP

Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 250
300 1200 (4540)
0.0 3.00 3.00 3.00 2.38 2.60 2.77 2.12 2.12 1.83
200
3.0 2.60 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.50 250
1000 (3790)
6.0 2.12 3.00 3.00 1.15 1.15 1.50 0.78 0.78 0.78
200 150
9.0 1.50 2.77 3.00 0.39 0.78 0.78 0.39 0.00 0.00 800 (3030)
12.0 1.15 2.12 3.00 0.00 0.00 0.39 150
100
15.0 0.39 1.83 3.00 100 600 (2270)
18.0 0.00 1.15 2.38 50
50
21.0 0.78 1.83
24.0 0.00 1.50 0 0
27.0 0.78
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 170 psi (1170 kPa) @ 1000 gpm (3790 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 226 11- 227
9 5/8'' 7/8 M/L 5.7 Stage
Specifications based on series 17 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.12 rev/gal 0.031 rev/l
Pressure at Full Load 740 psi 5100 kPa
Torque at Full Load 16,230 lb-ft 21992 Nm
Maximum Weight on Bit 251,000 lbs 1130 kN
Maximum Pull to Re-Run Motor 581,000 lbs 2610 kN
A 2.9 ft (0.88 m) Pull to Yield Motor 1,280,000 lbs 5760 kN
B 7.5 ft (2.29 m)
ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
C 31.3 ft (9.54 m)
0 2000 4000 6000 kPa
D Maximum Diameter of Motor at Upset: 10.75 in
(273 mm)
E Radius of Offset Pad: 5 in (127 mm) 0 200 400 600 800 1000 psi
Common Top Connection: 6 5/8 REG 7 5/8 REG
7 H-90
160
Common Bottom Connection: 6 5/8 REG 7 5/8 REG
140 1200 (4540)
Weight: 5410 lbs (2450 kg) 120

SPEED : RPM
1000 (3790)
100
Predicted Build Rates - Degrees/100ft (30m) 800 (3030)
Bend Slick Single Two 80
Setting Stabilizer Stabilizers 60 600 (2270)
Hole Size Hole Size Hole Size 40
Deg 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 gpm (lpm)
0.39 1.0 1.0 0.9 2.2 3.0 3.7 1.5 1.5 1.6 20
0.78 2.0 2.0 1.9 4.0 4.7 5.3 3.5 3.5 3.5 0
1.15 3.0 2.9 2.8 5.7 6.3 6.9 5.5 5.4 5.4
1.50 4.7 3.8 3.6 7.2 7.8 8.4 7.2 7.2 7.2 25000
1.83 6.4 4.6 4.4 8.7 9.3 9.8 8.7 8.9 8.9 30000
2.12 7.9 5.3 5.1 10.0 10.5 11.0 10.0 10.4 10.4 20000
TORQUE : lb-ft

25000

TORQUE : N.m
2.38 9.3 6.0 5.7 11.2 11.6 12.1 11.2 11.6 11.7
2.60 10.4 6.7 6.3 12.2 12.6 13.0 12.2 12.6 12.8 15000 20000
2.77 11.3 7.5 6.7 12.9 13.3 13.7 12.9 13.3 13.7
2.89 11.9 8.1 7.0 13.5 13.9 14.2 13.5 13.9 14.2 15000
10000

FULL LOAD
2.97 12.3 8.5 7.2 13.8 14.2 14.5 13.8 14.2 14.5
3.00 12.5 8.7 7.2 14.0 14.3 14.7 14.0 14.3 14.7 10000
5000
5000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 500
350
Hole Size Hole Size Hole Size 450

OUTPUT POWER : kW
OUTPUT POWER : HP

Deg/100ft 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 12 1/4 14 3/4 17 1/2 400 gpm (lpm) 300
0.0 3.00 3.00 3.00 2.38 2.60 2.77 2.12 2.12 1.83 350
1200 (4540) 250
3.0 2.60 3.00 3.00 1.83 1.83 2.12 1.50 1.50 1.15 300
6.0 2.12 3.00 3.00 1.15 1.15 1.50 0.78 0.78 0.78 200
250 1000 (3790)
9.0 1.50 2.77 3.00 0.39 0.78 0.78 0.39 0.00 0.00
200 150
12.0 1.15 2.12 3.00 0.00 0.00 0.39 800 (3030)
15.0 0.39 1.83 3.00 150 100
100 600 (2270)
18.0 0.00 1.15 2.60
50
21.0 0.78 2.12 50
24.0 0.39 1.50 0 0
27.0 1.15
30.0 0.39 1. Total pressure loss through motor with no load is
33.0 0.00 approximately 270 psi (1860 kPa) @ 1000 gpm (3790 lpm).
36.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 228 11- 229
11 1/4'' 3/4 M/L 3.6 Stage
Specifications based on series 3 motor.
Maximum Pump Rate 1,500 gpm 5680 lpm
Revolutions per Unit Volume 0.12 rev/gal 0.032 rev/l
Pressure at Full Load 470 psi 3240 kPa
Torque at Full Load 11,330 lb-ft 15352 Nm
Maximum Weight on Bit 120,000 lbs 540 kN
Maximum Pull to Re-Run Motor 612,000 lbs 2750 kN
A 2.8 ft (0.85 m) Pull to Yield Motor 1,753,000 lbs 7890 kN
B 8.8 ft (2.68 m)
C 29.9 ft (9.11 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 12.25 in
(311 mm)
E Radius of Offset Pad: 5.88 in (149 mm) 0 100 200 300 400 500 600 psi
Common Top Connection: 7 5/8 REG 8 5/8 REG
200
Common Bottom Connection: 7 5/8 REG 8 5/8 REG
180 1500 (5680)
160 1350 (5110)
Weight: 7070 lbs (3200 kg)

SPEED : RPM
140 1200 (4540)
Predicted Build Rates - Degrees/100ft (30m) 120 1050 (3970)
Bend Slick Single Two 100
Setting Stabilizer Stabilizers 80
Hole Size Hole Size Hole Size 60
Deg 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26 40
0.39 1.0 1.0 0.9 2.5 3.3 5.1 1.5 1.5 1.5 20 gpm (lpm)
0.78 2.0 1.9 1.7 4.2 4.9 6.5 3.4 3.4 3.4 0
1.15 3.0 2.9 2.6 5.8 6.5 7.9 5.3 5.3 5.2
1.50 4.3 3.7 3.3 7.3 7.9 9.3 7.0 7.0 6.9 15000 20000
1.83 6.0 4.6 4.1 8.7 9.3 10.5 8.7 8.6 8.5
12500 17500
2.12 7.5 5.3 4.7 9.9 10.5 11.6 9.9 10.1 9.9
15000

TORQUE : N.m
TORQUE : lb-ft

2.38 8.9 5.9 5.3 11.0 11.6 12.6 11.0 11.4 11.2
10000
2.60 10.0 6.5 5.8 12.0 12.5 13.4 12.0 12.5 12.2 12500
2.77 10.9 7.4 6.2 12.7 13.2 14.0 12.7 13.2 13.1
7500 10000
2.89 11.5 8.0 6.4 13.2 13.7 14.5 13.2 13.7 13.6

FULL LOAD
2.97 11.9 8.4 6.6 13.6 14.0 14.8 13.6 14.0 14.0 7500
5000
3.00 12.1 8.5 9.4 13.7 14.1 14.9 13.7 14.1 14.2 5000
2500
2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 320
225
Hole Size Hole Size Hole Size 280

OUTPUT POWER : kW
1500 (5680)
OUTPUT POWER : HP

Deg/100ft 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26 200


0.0 3.00 3.00 3.00 2.12 2.38 3.00 1.50 1.50 1.50 240 1350 (5110) 175
4.5 2.38 3.00 3.00 1.15 1.50 2.38 0.78 0.78 0.78 200 1200 (4540) 150
9.0 1.50 3.00 3.00 0.00 0.39 1.50 125
160 1050 (3970)
13.5 0.78 2.12 3.00 0.39 100
18.0 0.39 1.50 3.00 120
75
22.5 0.78 3.00 80
27.0 0.00 3.00 50
gpm (lpm)
40 25
31.5 3.00
36.0 2.38 0 0
40.5 1.50
45.0 0.78 1. Total pressure loss through motor with no load is
49.5 0.00 approximately 130 psi (900 kPa) @ 1350 gpm (5110 lpm).
54.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 230 11- 231
11 1/4'' 5/6 M/L 4.6 Stage
Specifications based on series 3 motor.
Maximum Pump Rate 1,800 gpm 6810 lpm
Revolutions per Unit Volume 0.09 rev/gal 0.024 rev/l
Pressure at Full Load 600 psi 4130 kPa
Torque at Full Load 19,010 lb-ft 25759 Nm
Maximum Weight on Bit 120,000 lbs 540 kN
Maximum Pull to Re-Run Motor 612,000 lbs 2750 kN
A 2.8 ft (0.85 m) Pull to Yield Motor 1,753,000 lbs 7890 kN
B 8.8 ft (2.68 m)
C 32.06 ft (9.77 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 5000 kPa
D Maximum Diameter of Motor at Upset: 12.25 in
(311 mm)
E Radius of Offset Pad: 5.88 in (149 mm) 0 200 400 600 800 psi
Common Top Connection: 7 5/8 REG 8 5/8 REG
180
Common Bottom Connection: 7 5/8 REG 8 5/8 REG
160 1800 (6810)
Weight: 7580 lbs (3440 kg) 140

SPEED : RPM
1500 (5680)
120
Predicted Build Rates - Degrees/100ft (30m) 100 1200 (4540)
Bend Slick Single Two 80 900 (3410)
Setting Stabilizer Stabilizers
60
Hole Size Hole Size Hole Size
Deg 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26
40
0.39 1.0 0.9 0.8 2.3 3.0 4.7 1.4 1.4 1.5 20 gpm (lpm)
0.78 1.9 1.8 1.7 3.9 4.6 6.1 3.3 3.3 3.3 0
1.15 2.8 2.7 2.4 5.4 6.1 7.4 5.0 5.0 5.0
1.50 4.1 3.6 3.2 6.9 7.5 8.7 6.7 6.7 6.6 30000 40000
1.83 5.7 4.3 3.9 8.2 8.8 9.9 8.2 8.3 8.1
25000 35000
2.12 7.1 5.0 4.5 9.4 9.9 10.9 9.4 9.6 9.5
TORQUE : lb-ft

30000

TORQUE : N.m
2.38 8.4 5.6 5.0 10.5 11.0 11.9 10.5 10.9 10.7
20000
2.60 9.5 6.2 5.5 11.4 11.8 12.7 11.4 11.8 11.7 25000
2.77 10.3 7.0 5.9 12.1 12.5 13.3 12.1 12.5 12.5
15000 20000
2.89 10.9 7.5 6.1 12.6 13.0 13.7 12.6 13.0 13.0
15000
FULL LOAD
2.97 11.3 7.9 6.3 12.9 13.3 14.0 12.9 13.3 13.4 10000
3.00 11.4 8.0 8.8 13.0 13.4 14.1 13.0 13.4 13.5 10000
5000
5000
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 700
500
Hole Size Hole Size Hole Size gpm (lpm)
450
OUTPUT POWER : HP

OUTPUT POWER : kW
600
Deg/100ft 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26
400
0.0 3.00 3.00 3.00 2.12 2.38 3.00 1.83 1.83 1.83 500 1800 (6810) 350
4.0 2.38 3.00 3.00 1.15 1.50 2.38 0.78 0.78 0.78
400 300
8.0 1.83 3.00 3.00 0.39 0.78 1.50 0.00 0.00 0.00 1500 (5680)
12.0 1.15 2.38 3.00 0.39 250
300
16.0 0.39 1.50 3.00 1200 (4540) 200
20.0 0.78 3.00 200 150
900 (3410) 100
24.0 0.39 3.00
100
28.0 3.00 50
32.0 2.38 0 0
36.0 1.83
40.0 0.78 1. Total pressure loss through motor with no load is
44.0 0.39 approximately 130 psi (900 kPa) @ 1500 gpm (5680 lpm).
48.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 232 11- 233
11 1/4'' 6/7 M/L 3.0 Stage
Specifications based on series 3 motor.
Maximum Pump Rate 1,200 gpm 4540 lpm
Revolutions per Unit Volume 0.10 rev/gal 0.026 rev/l
Pressure at Full Load 390 psi 2690 kPa
Torque at Full Load 12,090 lb-ft 16382 Nm
Maximum Weight on Bit 120,000 lbs 540 kN
Maximum Pull to Re-Run Motor 612,000 lbs 2750 kN
A 2.8 ft (0.85 m) Pull to Yield Motor 1,753,000 lbs 7890 kN
B 8.8 ft (2.68 m)
C 23 ft (7.01 m) ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
0 1000 2000 3000 4000 kPa
D Maximum Diameter of Motor at Upset: 12.25 in
(311 mm)
E Radius of Offset Pad: 5.88 in (149 mm) 0 200 400 600 psi
Common Top Connection: 7 5/8 REG 8 5/8 REG
140
Common Bottom Connection: 7 5/8 REG 8 5/8 REG
120 1200 (4540)
Weight: 5430 lbs (2460 kg)

SPEED : RPM
100 1000 (3790)
Predicted Build Rates - Degrees/100ft (30m) 80 800 (3030)
Bend Slick Single Two
60 600 (2270)
Setting Stabilizer Stabilizers
Hole Size Hole Size Hole Size 40
Deg 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26
20 gpm (lpm)
0.39 1.2 1.2 1.0 3.3 4.5 6.9 1.7 1.7 1.7
0.78 2.5 2.4 2.0 5.2 6.3 8.5 3.9 3.9 3.9 0
1.15 3.6 3.5 3.0 7.1 8.1 10.1 6.1 6.0 5.9
1.50 5.3 4.5 3.9 8.8 9.8 11.6 8.1 8.0 7.9 20000
1.83 7.4 5.5 4.8 10.4 11.3 13.0 10.0 9.9 9.7 25000
17500
2.12 9.3 6.4 5.6 11.9 12.7 14.3 11.7 11.6 11.3
TORQUE : lb-ft

15000 20000

TORQUE : N.m
2.38 10.9 7.2 6.2 13.2 14.0 15.4 13.2 13.1 12.8
2.60 12.3 7.9 6.8 14.2 15.0 16.3 14.2 14.4 14.0 12500
2.77 13.4 9.0 7.3 15.1 15.8 17.1 15.1 15.3 15.0 15000
10000
2.89 14.1 9.7 7.6 15.7 16.4 17.6 15.7 16.0 15.6 FULL LOAD
2.97 14.6 10.2 11.8 16.1 16.8 17.9 16.1 16.5 16.1 7500 10000
3.00 14.8 10.3 11.9 16.2 16.9 18.0 16.2 16.6 16.2 5000
5000
2500
Maximum Adjustable Bend Setting
For Rotary Drilling - Degrees 0 0
Hole Slick Single Two
Curvature Stabilizer Stabilizer 400
Hole Size Hole Size Hole Size

OUTPUT POWER : kW
350 1200 (4540)
OUTPUT POWER : HP

Deg/100ft 14 3/4 17 1/2 26 14 3/4 17 1/2 26 14 3/4 17 1/2 26 250


0.0 3.00 3.00 3.00 1.83 2.60 3.00 1.50 1.50 1.50 300
1000 (3790) 200
6.5 2.38 3.00 3.00 0.78 1.15 2.77 0.39 0.39 0.39 250
13.0 1.50 3.00 3.00 0.00 1.50 800 (3030)
200 150
19.5 0.78 2.12 3.00 0.39
26.0 0.00 1.50 3.00 150 600 (2270) 100
32.5 0.39 3.00 100
39.0 3.00 50
50 gpm (lpm)
45.5 3.00
52.0 2.77 0 0
58.5 1.83
65.0 1.15 1. Total pressure loss through motor with no load is
71.5 0.00 approximately 110 psi (760 kPa) @ 1000 gpm (3790 lpm).
78.0 2. Charts show suppliers' data with water @ 68F (20C).
3. For temperatures exceeding 140F (60C), full load
Refer to page 11-1 for guidelines of above table.
pressure decreases as per Table 5.1, page 5-8.
11- 234 11- 235
ADJUSTABLE HOUSING
OPERATING INSTRUCTIONS
These operating instructions apply to 2 degree,
3 degree and 4 degree adjustable housings.
P O W E R SE C TION

LOC K HO U SIN G
P O W E R S E C T IO N
A PP LY TH R EA D DO PE
TO T HIS FAC E BE FOR E
R E TOR Q U IN G
L O C K H O U S IN G

TONG AREA
A D JU STIN G R IN G

A D JU S T IN G R IN G

W EAR PAD

OFFS ET H O US IN G

O F F S E T H O U S IN G FIGURE 3
TONG AREA * Engage teeth of adjusting ring at chosen angle
FIGURE 1 setting.
* Break joint with tongs on tong areas. * Apply thread dope to mating faces of the lock
* Keep adjusting ring engaged with offset housing and housing and adjusting ring.
back off lock housing 2 turns. * Torque lock housing to recommended value listed in
the table below.
NOTE: Teeth must stay engaged during the * Matched number indicates angle of bend and exact
back off procedure. short side of motor.

LOCK HOUSING MAKE-UP TORQUE


P O W E R S E C T IO N
Motor Size Imperial Metric
L O C K H O U S IN G 2 3/8" 1,600 lb-ft 2,200 N.m
2 7/8" 2,200 lb-ft 3,000 N.m
3 1/8" 4,500 lb-ft 6,100 N.m
3 3/8" 4,500 lb-ft 6,100 N.m
A D J U S T IN G R IN G 3 1/2" 5,000 lb-ft 6,800 N.m
3 3/4" 5,300 lb-ft 7,200 N.m
4 3/4" 10,000 lb-ft 13,500 N.m
5" 15,000 lb-ft 20,300 N.m
6 1/4" 23,000 lb-ft 31,000 N.m
6 3/4" / 7" 28,000 lb-ft 38,000 N.m
O F F S E T H O U S IN G
7 3/4" / 8" 43,000 lb-ft 58,000 N.m
9 5/8" 68,000 lb-ft 92,000 N.m
FIGURE 2 11 1/4" 80,000 lb-ft 108,000 N.m
* Slide the adjusting ring up to disengage teeth.
* To adjust bend angle, rotate adjusting ring clockwise
until the required angle marked on the adjusting ring
and offset housing match.

NOTE: Do not rotate counterclockwise beyond


the 0 degree setting.
12-1 12-2
ADJUSTABLE HOUSING
OPERATING INSTRUCTIONS
In the event that the adjusting ring disengages
from the offset housing and rotates with the lock
housing, the procedure outlined below should be
followed to reset the adjusting ring to the proper
position prior to setting the bend angle:

1) Slide the adjusting ring up until teeth disengage


from the offset housing, if not already done.

2) Screw the adjusting ring (and the splined


mandrel) clockwise into the offset housing until
the splined mandrel stops.

3) Back off 2 turns (counterclockwise rotation).

4) Rotate the adjusting ring clockwise until the "0"


markings align.

The adjustable housing is now reset and can be set to


the desired bend angle as indicated in the previous 2
pages.

The following table shows the available bend settings


for the 2 , 3 and 4 degree adjustable housings.

ADJUSTABLE HOUSING BEND SETTINGS

2 DEGREE 3 DEGREE 4 DEGREE


0.00 0.00 0.00
0.26 0.39 0.35
0.52 0.78 0.69
0.77 1.15 1.04
1.00 1.50 1.37
1.22 1.83 1.69
1.41 2.12 2.00
1.59 2.38 2.29
1.73 2.60 2.57
1.85 2.77 2.83
1.93 2.89 3.06
1.98 2.97 3.28
2.00 3.00 3.46
3.63
3.76
3.86
3.94
3.98
4.00

12-3
NOZZLE SELECTION NOZZLE SELECTION
AND REPLACEMENT AND REPLACEMENT
Vector multi-lobe motors can be supplied with a
NOZZLE

NOZZLE FLOW RATE : usgpm


nozzle fitted in the top of the rotor to allow a portion of the 800
total flow to bypass the rotor and stator. This option must be 32/32
specified at time of order. 700 30/32
28/32
600
REPLACEMENT 26/32
The nozzle is held in place by a carrier threaded into the end 500 24/32
of the rotor. It can be replaced in the field as follows: 400 22/32
1) Remove the dump sub (top sub). 20/32
300
2) Remove the threaded carrier using the appropriate sized 18/32
socket as shown in the table below. 200 16/32
3) Remove and replace the nozzle. Depending on the size, 100 12/32
the nozzle will be either housed in the carrier, or the 8/32
0
rotor itself. Use the type of nozzle shown in the table
below. For 2 7/8" and 3 3/8" motors the nozzle is press fit 0 100 200 300 400 500 600 700 800
into the carrier and must be replaced as a unit. ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
4) Replace the threaded carrier. Torque to the psi
recommended value shown in the table below.
5) Replace the dump sub (top sub) and torque to the
recommended value shown in "SERVICING".
NOZZLE
NOZZLE FLOW RATE : lpm 3500
SIZE SOCKET NOZZLE NOZZLE
SIZE TYPE CARRIER
32/32
3000
TORQUE 30/32
in in (mm) lb-ft (N.m) 2500
28/32
2 7/8 1 1/16 (27) Reed 371748 100 (140)
2000 26/32
3 3/8 1 1/16 (27) Reed 371748 100 (140) 24/32
3 3/4 1 3/16 (30) Reed 371748 200 (270) 1500 22/32
4 3/4 1 1/2 (38) Dresser 16527-xx 300 (410) 20/32
6 1/4 1 5/8 (41) Dresser 90021-28 600 (800) 1000 18/32
6 3/4 1 5/8 (41) Dresser 90021-28 600 (800) 16/32
7 3/4 1 5/8 (41) Dresser 90021-28 600 (800) 500 12/32
9 5/8 1 5/8 (41) Dresser 90021-28 600 (800) 8/32
0
11 1/4 1 5/8 (41) Dresser 90021-28 600 (800)
0 1000 2000 3000 4000 5000 6000
SELECTION ON-BOTTOM MINUS OFF-BOTTOM PRESSURE
The following is the procedure used to select the proper kPa
nozzle size.

From the motor performance curve (see Performance Data) EXAMPLE


obtain the flow rate through the motor (Qm) for the desired A total flow of 600 gpm is desired using a 6 1/4" 7/8 M/L 2.8
motor RPM and differential pressure. stage motor at an on-bottom minus off-bottom pressure
of 240 psi. The desired speed is 100 RPM and the mud
Subtract this flow rate from the total desired flow rate (Qt) to weight is 11 PPG.
obtain the required flow rate through the nozzle (Qn).
The motor performance chart for the above motor shows
Adjust this flow rate for the actual mud weight to obtain an that 320 gpm is required to turn the motor at 100 RPM and
equivalent nozzle flow rate (Qe) as follows: 240 psi. Subtracting this 320 gpm motor flow rate from the
600 gpm total flow rate gives a required nozzle flow rate of
Qe = Qn x .35 x Square Root (Mud Weight) 280 gpm.
(gpm) (gpm) (lb/gal)
Adjusting this nozzle flow rate for 11 PPG mud gives an
Qe = Qn x .0316 x Square Root (Mud Weight) equivalent nozzle flow rate (Qe) of:
(lpm) (lpm) (kg/m3) Qe = Qn x .35 x SQRT(PPG)
Qe = 280gpm x .35 x SQRT (11)
Using this equivalent nozzle flow rate (Qe) and the desired Qe = 325 gpm.
motor differential pressure, obtain the required nozzle from
one of the charts below. Choose the next smaller nozzle if The above chart indicates that a 24/32 nozzle is required to
between sizes. bypass 325 gpm at 240 psi.

13-1 13-2
FORMULAS

Hydraulic Power

Pb x Q Pb x Q
Power (HP) = Power (kW) =
1714 60000
Pb = Pressure drop across Pb = Pressure drop across
bit jet nozzles (psi) bit jet nozzles (kPa)
Q = Flow rate (US gpm) Q = Flow rate (lpm)

Mechanical Power

TxN Tx N
Power (HP) = Power (kW) =
5250 9548.8
T = Torque (lb-ft) T = Torque (N.m)
N = Speed (RPM) N = Speed (RPM)

Pressure Drop Across the Bit Jet Nozzle (Pb)

Q2 x W Q2 x W
Pb ( psi ) = Pb ( kPa ) =
10858 x A 2 6.49643 x A 2
Q = Flow rate (US gpm) Q = Flow rate (lpm)
W = Mud weight (lb/gal) W = Mud weight (kg/m)
A = Area (in) A = Area (mm)

Total Flow Area (TFA) to Obtain a Specific Bit


Pressure Loss

W x Q2 W x Q2
TFA (in 2 ) = TFA (mm 2 ) =
10858 x Pb 6.49643 x Pb

W = Mud Weight (lb/gal) W = Mud weight (kg/m)


Q = Flow rate (US gpm) Q = Flow rate (lpm)
Pb = Bit pressure loss (psi) Pb = Bit pressure loss (kPa)

14-1
IMPERIAL CONVERSIONS

TO CONVERT FROM TO MULTIPLY BY


SYMBOL UNIT SYMBOL UNIT
LENGTH in inch mm millimeter 25.4
in inch cm centimeter 2.54
ft feet m meter 0.3048
mi mile km kilometer 1.609

MASS lb pound kg kilogram 0.4536

PRESSURE psi pounds/square inch kPa kilopascal 6.8948


psi pounds/square inch MPa megapascal 0.006895
psi pounds/square inch kgf/cm kilogramf/square centimeter 0.0703067
psi pounds/square inch atm atmosphere 0.0680462
psi pounds/square inch bar bar 0.06895

STRESS psi pounds/square inch MPa megapascal 0.006895


psi pounds/square inch kgf/cm kilogramf/square centimeter 0.0703067
psi pounds/square inch bar bar 0.06895
psi pounds/square inch N/mm newtons/square millimeter 0.006895

AREA in square inch cm square centimeter 6.4516


in square inch mm square millimeter 645.16
ft square feet m square meter 0.0929

FORCE lbf pound kgf kilogram_force 0.4536


lbf pound N newton 4.4482
lbf pound daN decanewton 0.4448
lbf pound kN kilonewton 0.004448

FLOW gpm (US) gallons (US) per minute lpm liters/minute 3.785
gpm (US) gallons (US) per minute m/min cubic meters/minute 0.003785
bbl/min (US) barrels (US) per minute m/min cubic meters/minute 0.1589

TORQUE lb-ft pound foot N.m newton.meter 1.35582


lb-ft pound foot kN.m kilonewton.meter 0.00135582
lb-ft pound foot kg.m kilogram.meter 0.13820

VOLUME gal (US) gallon (US) l liter 3.785


gal (US) gallon (US) m cubic meter 0.003785
ft cubic feet m cubic meter 0.02831
bbl (US) barrel (US) m cubic meter 0.1589

POWER HP horsepower kW kilowatt 0.7457

NOZZLES 32nds inch 32nds inch mm millimeter 0.793

TEMPERATURE F Fahrenheit C Celsius (F-32)/1.8

DENSITY lbs/gal pounds per gallon (US) kg/m kilograms/cubic meter 119.82
lbs/gal pounds per gallon (US) g/cm grams/cubic centimeter 0.11982
lbs/in pounds per cubic inch kg/m kilograms/cubic meter 27679.7
lbs/in pounds per cubic inch g/cm grams/cubic centimeter 27.6797

ENERGY lb-ft pound foot J joules 1.35583

14-2 14-3
METRIC CONVERSIONS

TO CONVERT FROM TO MULTIPLY BY


SYMBOL UNIT SYMBOL UNIT
LENGTH mm millimeter in inch 0.03937
cm centimeter in inch 0.39370
m meter ft feet 3.28084
km kilometer mi mile 0.62150

MASS kg kilogram lb pound 2.20462

PRESSURE kPa kilopascal psi pounds/square inch 0.14504


MPa megapascal psi pounds/square inch 145.03263
kgf/cm kilogramf/square centimeter psi pounds/square inch 14.22340
atm atmosphere psi pounds/square inch 14.69590
bar bar psi pounds/square inch 14.50326

STRESS MPa megapascal psi pounds/square inch 145.03263


kgf/cm kilogramf/square centimeter psi pounds/square inch 14.22340
bar bar psi pounds/square inch 14.50326
N/mm newtons/square millimeter psi pounds/square inch 145.03263

AREA cm square centimeter in square inch 0.15500


mm square millimeter in square inch 0.00155
m square meter ft square feet 10.76426

FORCE kgf kilogram_force lbf pound 2.20459


N newton lbf pound 0.22481
daN decanewton lbf pound 2.24820
kN kilonewton lbf pound 224.82014

FLOW lpm liters/minute gpm (US) gallons (US) per minute 0.26420
m/min cubic meters/minute gpm (US) gallons (US) per minute 264.20079
m/min cubic meters/minute bbl/min (US) barrels (US) per minute 6.29327

TORQUE N.m newton.meter lb-ft pound foot 0.737561


kN.m kilonewton.meter lb-ft pound foot 737.561
kg.m kilogram.meter lb-ft pound foot 7.23589

VOLUME l liter gal (US) gallon (US) 0.26420


m cubic meter gal (US) gallon (US) 264.20079
m cubic meter ft cubic feet 35.32321
m cubic meter bbl (US) barrel (US) 6.29327

POWER kW kilowatt HP horsepower 1.34102

NOZZLES mm millimeter 32nds inch 32nds inch 1.26103

TEMPERATURE C Celsius F Fahrenheit (Cx1.8)+32

DENSITY kg/m kilograms/cubic meter lbs/gal pounds per gallon (US) 0.00835
g/cm grams/cubic centimeter lbs/gal pounds per gallon (US) 8.34585
kg/m kilograms/cubic meter lbs/in pounds per cubic inch 0.0000361
g/cm grams/cubic centimeter lbs/in pounds per cubic inch 0.03613

ENERGY J joules lb-ft pound foot 0.737557

14-4 14-5
MILLIMETER EQUIVALENTS OF
COMMON INCH MEASUREMENTS
in 0 1/16 1/8 3/16 1/4 5/16 3/8 7/16
0 0.0 1.6 3.2 4.8 6.4 7.9 9.5 11.1
1 25.4 27.0 28.6 30.2 31.8 33.3 34.9 36.5
2 50.8 52.4 54.0 55.6 57.2 58.7 60.3 61.9
3 76.2 77.8 79.4 81.0 82.6 84.1 85.7 87.3
4 101.6 103.2 104.8 106.4 108.0 109.5 111.1 112.7
5 127.0 128.6 130.2 131.8 133.4 134.9 136.5 138.1
6 152.4 154.0 155.6 157.2 158.8 160.3 161.9 163.5
7 177.8 179.4 181.0 182.6 184.2 185.7 187.3 188.9
8 203.2 204.8 206.4 208.0 209.6 211.1 212.7 214.3
9 228.6 230.2 231.8 233.4 235.0 236.5 238.1 239.7
10 254.0 255.6 257.2 258.8 260.4 261.9 263.5 265.1
11 279.4 281.0 282.6 284.2 285.8 287.3 288.9 290.5
12 304.8 306.4 308.0 309.6 311.2 312.7 314.3 315.9
13 330.2 331.8 333.4 335.0 336.6 338.1 339.7 341.3
14 355.6 357.2 358.8 360.4 362.0 363.5 365.1 366.7
15 381.0 382.6 384.2 385.8 387.4 388.9 390.5 392.1
16 406.4 408.0 409.6 411.2 412.8 414.3 415.9 417.5
17 431.8 433.4 435.0 436.6 438.2 439.7 441.3 442.9
18 457.2 458.8 460.4 462.0 463.6 465.1 466.7 468.3
19 482.6 484.2 485.8 487.4 489.0 490.5 492.1 493.7
20 508.0 509.6 511.2 512.8 514.4 515.9 517.5 519.1
21 533.4 535.0 536.6 538.2 539.8 541.3 542.9 544.5
22 558.8 560.4 562.0 563.6 565.2 566.7 568.3 569.9
23 584.2 585.8 587.4 589.0 590.6 592.1 593.7 595.3
24 609.6 611.2 612.8 614.4 616.0 617.5 619.1 620.7

in 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16


0 12.7 14.3 15.9 17.5 19.1 20.6 22.2 23.8
1 38.1 39.7 41.3 42.9 44.5 46.0 47.6 49.2
2 63.5 65.1 66.7 68.3 69.9 71.4 73.0 74.6
3 88.9 90.5 92.1 93.7 95.3 96.8 98.4 100.0
4 114.3 115.9 117.5 119.1 120.7 122.2 123.8 125.4
5 139.7 141.3 142.9 144.5 146.1 147.6 149.2 150.8
6 165.1 166.7 168.3 169.9 171.5 173.0 174.6 176.2
7 190.5 192.1 193.7 195.3 196.9 198.4 200.0 201.6
8 215.9 217.5 219.1 220.7 222.3 223.8 225.4 227.0
9 241.3 242.9 244.5 246.1 247.7 249.2 250.8 252.4
10 266.7 268.3 269.9 271.5 273.1 274.6 276.2 277.8
11 292.1 293.7 295.3 296.9 298.5 300.0 301.6 303.2
12 317.5 319.1 320.7 322.3 323.9 325.4 327.0 328.6
13 342.9 344.5 346.1 347.7 349.3 350.8 352.4 354.0
14 368.3 369.9 371.5 373.1 374.7 376.2 377.8 379.4
15 393.7 395.3 396.9 398.5 400.1 401.6 403.2 404.8
16 419.1 420.7 422.3 423.9 425.5 427.0 428.6 430.2
17 444.5 446.1 447.7 449.3 450.9 452.4 454.0 455.6
18 469.9 471.5 473.1 474.7 476.3 477.8 479.4 481.0
19 495.3 496.9 498.5 500.1 501.7 503.2 504.8 506.4
20 520.7 522.3 523.9 525.5 527.1 528.6 530.2 531.8
21 546.1 547.7 549.3 550.9 552.5 554.0 555.6 557.2
22 571.5 573.1 574.7 576.3 577.9 579.4 581.0 582.6
23 596.9 598.5 600.1 601.7 603.3 604.8 606.4 608.0
24 622.3 623.9 625.5 627.1 628.7 630.2 631.8 633.4

14-6
MILLIMETER AND
DECIMAL EQUIVALENTS
Fraction mm Decimal Fraction mm Decimal
1/64 0.4 0.01563 33/64 13.1 0.51563
1/32 0.8 0.03125 17/32 13.5 0.53125
3/64 1.2 0.04688 35/64 13.9 0.54688
1/16 1.6 0.0625 9/16 14.3 0.5625
5/64 2.0 0.07813 37/64 14.7 0.57813
3/32 2.4 0.09375 19/32 15.1 0.59375
7/64 2.8 0.10938 39/64 15.5 0.60938
1/8 3.2 0.125 5/8 15.9 0.625
9/64 3.6 0.14063 41/64 16.3 0.64063
5/32 4.0 0.15625 21/32 16.7 0.65625
11/64 4.4 0.17188 43/64 17.1 0.67188
3/16 4.8 0.1875 11/16 17.5 0.6875
13/64 5.2 0.20313 45/64 17.9 0.70313
7/32 5.6 0.21875 23/32 18.3 0.71875
15/64 6.0 0.23438 47/64 18.7 0.73438
1/4 6.4 0.250 3/4 19.1 0.750
17/64 6.7 0.26563 49/64 19.4 0.76563
9/32 7.1 0.28125 25/32 19.8 0.78125
19/64 7.5 0.29688 51/64 20.2 0.79688
5/16 7.9 0.3125 13/16 20.6 0.8125
21/64 8.3 0.32813 53/64 21.0 0.82813
11/32 8.7 0.34375 27/32 21.4 0.84375
23/64 9.1 0.35938 55/64 21.8 0.85938
3/8 9.5 0.375 7/8 22.2 0.875
25/64 9.9 0.39063 57/64 22.6 0.89063
13/32 10.3 0.40625 29/32 23.0 0.90625
27/64 10.7 0.42188 59/64 23.4 0.92188
7/16 11.1 0.4375 15/16 23.8 0.9375
29/64 11.5 0.45313 61/64 24.2 0.95313
15/32 11.9 0.46875 31/32 24.6 0.96875
31/64 12.3 0.48438 63/64 25.0 0.98438
1/2 12.7 0.500 1 25.4 1.000

14-7
BUOYANCY FACTOR FOR
STEEL DRILL COLLARS
Mud Weight Mud Weight Buoyancy
(lbs/gal) (kgf/l) Factor
8.5 1.02 0.870
9.0 1.08 0.862
9.5 1.14 0.855
10.0 1.20 0.847
10.5 1.26 0.839
11.0 1.32 0.832
11.5 1.38 0.824
12.0 1.44 0.816
12.5 1.50 0.809
13.0 1.56 0.801
13.5 1.62 0.793
14.0 1.68 0.786
14.5 1.74 0.778
15.0 1.80 0.771
15.5 1.86 0.763
16.0 1.92 0.755
16.5 1.98 0.748
17.0 2.04 0.740
17.5 2.10 0.732
18.0 2.16 0.725

Example: MW 1
BF = 1
65.37
BF = Buoyancy Factor
MW1 = Mud Weight (lbs/gal)

MW 2
BF = 1
7.83
BF = Buoyancy Factor
MW2 = Mud Weight (kgf/l)

Note: lb/gal x .11983 = kgf/l

14-8
COLLAR WEIGHTS
IN POUNDS PER FOOT
OD Bore of Drill Collar
of in
Drill
2 13/16

Collar
1 1/4

1 1/2

1 3/4

2 1/4

2 1/2

3 1/4

3 1/2

3 3/4
in
1

4
2 7/8 19 18 16
3 21 20 18
3 1/8 22 22 20
3 1/4 26 24 22
3 1/2 30 29 27
3 3/4 35 33 32
4 40 39 37 35 32 29
4 1/8 43 41 39 37 35 32
4 1/4 46 44 42 40 38 35
4 1/2 51 50 48 46 43 41
4 3/4 54 52 50 47 44
5 61 59 56 53 50
5 1/4 68 65 63 60 57
5 1/2 75 73 70 67 64 60
5 3/4 82 80 78 75 72 67 64 60
6 90 88 85 83 79 75 72 68
6 1/4 98 96 94 91 88 83 80 76 72
6 1/2 107 105 102 99 96 91 89 85 80
6 3/4 116 114 111 108 105 100 98 93 89
7 125 123 120 117 114 110 107 103 98 93 84
7 1/4 134 132 130 127 124 119 116 112 108 103 93
7 1/2 144 142 139 137 133 129 126 122 117 113 102
7 3/4 154 152 150 147 144 139 136 132 128 123 112
8 165 163 160 157 154 150 147 143 138 133 122
8 1/4 176 174 171 168 165 160 158 154 149 144 133
8 1/2 187 185 182 179 176 172 169 165 160 155 150
9 210 208 206 203 200 195 192 188 184 179 174
9 1/2 234 232 230 227 224 220 216 212 209 206 198
9 3/4 248 245 243 240 237 232 229 225 221 216 211
10 261 259 257 254 251 246 243 239 235 230 225
11 317 315 313 310 307 302 299 295 291 286 281
12 379 377 374 371 368 364 361 357 352 347 342

14-9
DRILL COLLAR CONNECTION

MAKE-UP TORQUE
Connection Minimum Make-up Torque2 lb-ft
OD Bore of Drill Collar, inches
Size Type in 1 1 1/4 1 1/2 1 3/4 2 2 1/4 2 1/2 2 13/16

API NC23 3 *2,508 *2,508 *2,508


3 1/8 *3,330 *3,330 2,647
3 1/4 4,000 3,387 2,647

2 3/8 Regular 3 *2,241 *2,241 1,749


3 1/8 *3,028 2,574 1,749
3 1/4 3,285 2,574 1,749

2 7/8 PAC3 3 *3,797 *3,797 2,926


3 1/8 *4,966 4,151 2,926
3 1/4 5,206 4,151 2,926

2 3/8 API IF 3 1/2 *4,606 *4,606 3,697


API NC26 3 3/4 5,501 4,668 3,697
2 7/8 Slim Hole

2 7/8 Regular 3 1/2 *3,838 *3,838 *3,838


3 3/4 5,766 4,951 4,002
3 7/8 5,766 4,951 4,002

2 7/8 Extra Hole 3 3/4 *4,089 *4,089 *4,089


3 1/2 Dbl. Streamline 3 7/8 *5,352 *5,352 *5,352
2 7/8 Mod. Open 4 1/8 *8,059 *8,059 7,433

2 7/8 API IF 3 7/8 *4,640 *4,640 *4,640 *4,640


API NC31 4 1/8 *7,390 *7,390 *7,390 6,853

3 1/2 Regular 4 1/8 *6,466 *6,466 *6,466 *6,466 5,685


4 1/4 *7,886 *7,886 *7,886 7,115 5,685
4 1/2 10,471 9,514 8,394 7,115 5,685

3 1/2 Slim Hole 4 1/4 *8,858 *8,858 8,161 6,853 5,391


4 1/2 10,286 9,307 8,161 6,853 5,391

API NC35 4 1/2 *9,038 *9,038 *9,038 7,411


4 3/4 12,273 10,826 9,202 7,411
5 12,273 10,826 9,202 7,411

3 1/2 Extra Hole 4 1/4 *5,161 *5,161 *5,161 *5,161


4 Slim Hole 4 1/2 *8,479 *8,479 *8,479 8,311
3 1/2 Mod. Open 4 3/4 *12,074 11,803 10,144 8,311
5 13,283 11,803 10,144 8,311
5 1/4 13,283 11,803 10,144 8,311

3 1/2 API IF 4 3/4 *9,986 *9,986 *9,986 *9,986 8,315


API NC 38 5 *13.949 *13.949 12,907 10,997 8,315
4 1/2 Slim Hole 5 1/4 16,207 14,643 12,907 10,997 8,315
5 1/2 16,207 14,643 12,907 10,997 8,315

14-10 14-11
DRILL COLLAR CONNECTION

MAKE-UP TORQUE
Connection Minimum Make-up Torque2 lb-ft
OD Bore of Drill Collar, inches
Size Type in 1 1/2 1 3/4 2 2 1/4 2 1/2 2 13/16 3 3 1/4

4
3 1/2 H-90 4 3/4 *8,786 *8,786 *8,786 *8,786 *8,786
5 *12,794 *12,794 *12,794 *12,794 10,408
5 1/4 *17,094 16,929 15,137 13,151 10,408
5 1/2 18,522 16,929 15,137 13,151 10,408

4 Full Hole 5 *10,910 *10,910 *10,910 *10,910 *10,910


API NC40 5 1/4 *15,290 *15,290 *15,290 14,969 12,125
4 Mod. Open 5 1/2 *19,985 18,886 17,028 14,969 12,125
4 1/2 Dbl. Streamline 5 3/4 20,539 18,886 17,028 14,969 12,125
6 20,539 18,886 17,028 14,969 12,125

4 H-904 5 1/4 *12,590 *12,590 *12,590 *12,590 *12,590


5 1/2 *17,401 *17,401 *17,401 *17,401 16,536
5 3/4 *22,531 *22,531 21,714 19,543 16,536
6 25,408 23,671 21,714 19,543 16,536
6 1/4 25,408 23,671 21,714 19,543 16,536

4 1/2 API Regular 5 1/2 *15,576 *15,576 *15,576 *15,576 *15,576


5 3/4 *20,609 *20,609 *20,609 19,601 16,629
6 25,407 23,686 21,749 19,601 16,629
6 1/4 25,407 23,686 21,749 19,601 16,629

API NC44 5 3/4 *20,895 *20,895 *20,895 *20,895 18,161


6 *26,453 25,510 23,493 21,257 18,161
6 1/4 27,300 25,510 23,493 21,257 18,161
6 1/2 27,300 25,510 23,493 21,257 18,161

4 1/2 API Full Hole 5 1/2 *12,973 *12,973 *12,973 *12,973 *12,973
5 3/4 *18,119 *18,119 *18,119 *18,119 17,900
6 *23,605 *23,605 22,028 19,921 17,900
6 1/4 27,294 25,272 22,028 19,921 17,900
6 1/2 27,294 25,272 22,028 19,921 17,900

4 1/2 Extra Hole 5 3/4 *17,738 *17,738 *17,738 *17,738


API NC46 6 *23,422 *23,422 22,426 20,311
4 API IF 6 1/4 28,021 25,676 22,426 20,311
4 1/2 Semi IF 6 1/2 28,021 25,676 22,426 20,311
5 Dbl. Streamline 6 3/4 28,021 25,676 22,426 20,311
4 1/2 Mod. Open

4
4 1/2 H-90 5 3/4 *18,019 *18,019 *18,019 *18,019
6 *23,681 *23,681 23,159 21,051
6 1/4 28,732 26,397 23,159 21,051
6 1/2 28,732 26,397 23,159 21,051
6 3/4 28,732 26,397 23,159 21,051

4
5 H-90 6 1/4 *25,360 *25,360 *25,360 *25,360 23,988
6 1/2 *31,895 *31,895 29,400 27,167 23,988
6 3/4 35,292 32,825 29,400 27,167 23,988
7 35,292 32,825 29,400 27,167 23,988
14-12 14-13
DRILL COLLAR CONNECTION

MAKE-UP TORQUE
Connection Minimum Make-up Torque2 lb-ft
OD Bore of Drill Collar, inches
Size Type in 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4

4 1/2 API IF 6 1/4 *23,004 *23,004 *23,004 *23,004 *23,004


API NC50 6 1/2 *29,679 *29,679 *29,679 *29,679 26,675
5 Extra Hole 6 3/4 *36,742 35,824 32,277 29,966 26,675
5 Mod. Open 7 38,397 35,824 32,277 29,966 26,675
5 1/2 Dbl. Streamline 7 1/4 38,397 35,824 32,277 29,966 26,675
5 Semi IF 7 1/2 38,397 35,824 32,277 29,966 26,675

5 1/2 H-904 6 3/4 *34,508 *34,508 *34,508 34,142 30,781


7 *41,993 40,117 36,501 34,142 30,781
7 1/4 42,719 40,117 36,501 34,142 30,781
7 1/2 42,719 40,117 36,501 34,142 30,781

5 1/2 API Regular 6 3/4 *31,941 *31,941 *31,941 *31,941 30,495


7 *39,419 *39,419 36,235 33,868 30,495
7 1/4 42,481 39,866 36,235 33,868 30,495
7 1/2 42,481 39,866 36,235 33,868 30,495

5 1/2 API Full Hole 7 *32,762 *32,762 *32,762 *32,762 *32,762


7 1/4 *40,998 *40,998 *40,998 *40,998 *40,998
7 1/2 *49,661 *49,661 47,756 45,190 41,533
7 3/4 54,515 51,687 47,756 45,190 41,533

API NC56 7 1/4 *40,498 *40,498 *40,498 *40,498


7 1/2 *49,060 48,221 45,680 42,058
7 3/4 52,115 48,221 45,680 42,058
8 52,115 48,221 45,680 42,058

6 5/8 API Regular 7 1/2 *46,399 *46,399 *46,399 *46,399


7 3/4 *55,627 53,346 50,704 46,936
8 57,393 53,346 50,704 46,936
8 1/4 57,393 53,346 50,704 46,936

4
6 5/8 H-90 7 1/2 *46,509 *46,509 *46,509 *46,509
7 3/4 *55,708 *55,708 53,629 49,855
8 60,321 56,273 53,629 49,855
8 1/4 60,321 56,273 53,629 49,855

API NC61 8 *55,131 *55,131 *55,131 *55,131


8 1/4 *65,438 *65,438 *65,438 61,624
8 1/2 72,670 68,398 65,607 61,624
8 3/4 72,670 68,398 65,607 61,624
9 72,670 68,398 65,607 61,624

5 1/2 API IF 8 *56,641 *56,641 *56,641 *56,641 *56,641


8 1/4 *67,133 *67,133 *67,133 63,381 59,027
8 1/2 74,626 70,277 67,436 63,381 59,027
8 3/4 74,626 70,277 67,436 63,381 59,027
9 74,626 70,277 67,436 63,381 59,027
9 1/4 74,626 70,277 67,436 63,381 59,027

14-14 14-15
DRILL COLLAR CONNECTION

MAKE-UP TORQUE
Connection Minimum Make-up Torque2 lb-ft
OD Bore of Drill Collar, inches
Size Type in 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4

6 5/8 API Full Hole 8 1/2 *67,789 *67,789 *67,789 *67,789 *67,789 67,184
8 3/4 *79,544 *79,544 *79,544 76,706 72,102 67,184
9 88,582 83,992 80,991 76,706 72,102 67,184
9 1/4 88,582 83,992 80,991 76,706 72,102 67,184
9 1/2 88,582 83,992 80,991 76,706 72,102 67,184

API NC70 9 *75,781 *75,781 *75,781 *75,781 *75,781 *75,781


9 1/4 *88,802 *88,802 *88,802 *88,802 *88,802 *88,802
9 1/2 *102,354 *102,354 *102,354 101,107 96,214 90,984
9 3/4 113,710 108,841 105,657 101,107 96,214 90,984
10 113,710 108,841 105,657 101,107 96,214 90,984
10 1/4 113,710 108,841 105,657 101,107 96,214 90,984

API NC77 10 *108,194 *108,194 *108,194 *108,194 *108,194 *108,194


10 1/4 *124,051 *124,051 *124,051 *124,051 *124,051 *124,051
10 1/2 *140,491 *140,491 *140,491 140,488 135,119 129,375
10 3/4 154,297 148,965 145,476 140,488 135,119 129,375
11 154,297 148,965 145,476 140,488 135,119 129,375

7 H-904 8 *53,454 *53,454 *53,454 *53,454 *53,454 *53,454


8 1/4 *63,738 *63,738 *63,738 *63,738 60,971 56,382
8 1/2 *74,478 72,066 69,265 65,267 60,971 56,382

7 5/8 API Regular 8 1/2 *60,402 *60,402 *60,402 *60,402 *60,402 *60,402
8 3/4 *72,169 *72,169 *72,169 *72,169 *72,169 *72,169
9 *84,442 *84,442 *84,442 84,221 79,536 74,529
9 1/4 96,301 91,633 88,580 84,221 79,536 74,529
9 1/2 96,301 91,633 88,580 84,221 79,536 74,529

7 5/8 H-904 9 *73,017 *73,017 *73,017 *73,017 *73,017 *73,017


9 1/4 *86,006 *86,006 *86,006 *86,006 *86,006 *86,006
9 1/2 *99,508 *99,508 *99,508 *99,508 *99,508 96,285

8 5/8 API Regular 10 *109,345 *109,345 *109,345 *109,345 *109,345 *109,345


10 1/4 *125,263 *125,263 *125,263 *125,263 *125,263 125,034
10 1/2 *141,767 *141,767 141,134 136,146 130,777 125,034

4
8 5/8 H-90 10 1/4 *113,482 *113,482 *113,482 *113,482 *113,482 *113,482
10 1/2 *130,063 *130,063 *130,063 *130,063 *130,063 *130,063

4
7 H-90 8 3/4 *68,061 *68,061 67,257 62,845 58,131
(with low torque face) 9 74,235 71,361 67,257 62,845 58,131

7 5/8 API Regular 9 1/4 *73,099 *73,099 *73,099 *73,099


(with low torque face) 9 1/2 *86,463 *86,463 82,457 77,289
9 3/4 91,789 87,292 82,457 77,289
10 91,789 87,292 82,457 77,289

14-16 14-17
DRILL COLLAR CONNECTION

MAKE-UP TORQUE
Connection Minimum Make-up Torque2 lb-ft
OD Bore of Drill Collar, inches
Size Type in 2 2 1/4 2 1/2 2 13/16 3 3 1/4 3 1/2 3 3/4

4
7 5/8 H-90 9 3/4 *91,667 *91,667 *91,667 *91,667 *91,667
(with low torque face) 10 *106,260 *106,260 *106,260 104,171 98,804
10 1/4 117,112 113,851 109,188 104,171 98,804
10 1/2 117,112 113,851 109,188 104,171 98,804

8 5/8 API Regular 10 3/4 *112,883 *112,883 *112,883 *112,883


(with low torque face) 11 *130,672 *130,672 *130,672 *130,672
11 1/4 147,616 142,430 136,846 130,871

8 5/8 H-904 10 3/4 *92,960 *92,960 *92,960 *92,960


(with low torque face) 11 *110,781 *110,781 *110,781 *110,781
11 1/4 *129,203 *129,203 *129,203 *129,203


Recommended Make-Up Torque1 For Rotary 2 Normal torque range is tabulated value plus 10%.
Shouldered Drill Collar Connections Higher torque values may be used under extreme
conditions.

Notes: 3 Make-up torque for 2 7/8 PAC connection is based on


87,500 psi stress and other factors listed in footnote 1.
1. Torque figures preceded by an asterisk (*) indicate that
the weaker member for the corresponding outside 4 Make-up torque for H-90 connection is based on
diameter (OD) and bore is the BOX; For all other torque 56,200 psi stress and other factors listed in footnote 1.
values the weaker member is the PIN.

2. In each connection size and type group, torque values


apply to all connection types in the group, when used This table taken from API Recommended Practice 7G, Sixteenth
with the same drill collar outside diameter and bore, Edition, December 1, 1998.
i.e. 2 3/8 API IF, API NC26, and 2 7/8 Slim Hole
connections used with 3 1/2 x 1 1/4 drill collars all have
the same minimum make-up torque of 4,600 ft.lb., and
the BOX is the weaker member.

3. Stress-relief features are disregarded for make-up


torque.

Footnotes:

1 Basis of calculations for recommended make-up


torque assumed the use of a thread compound
containing 40-60% by weight of finely powered metallic
zinc or 60% by weight of finely powered metallic lead,
with not more than 0.3% total active sulfur applied
thoroughly to all threads and shoulders and using the
th
modified screw jack formula in API RP7G (16 edition)
Appendix A, paragraph A.8, and a unit stress of 62,500
psi in the box or pin, whichever is weaker.

14-18 14-19
PROPERTIES OF DRILL PIPES

AND TOOL JOINTS
Premium Class Class 2
Drill Pipe Min Box Make-up Min Box Make-up
Type Min Shoulder Torque Min Shoulder Torque
Upset New Tool Joint Data OD With for Min OD With for Min
Nom Nom and New New Make-up Tool Eccentric OD Tool Tool Eccentric OD Tool
6
Size Weight Grade Connection OD ID Torque Joint Wear Joint Joint Wear Joint
in lb/ft in in lb-ft in in lb-ft in in lb-ft

2 3/8 4.85 EU-E75 NC26 3 3/8 1 3/4 4,125 B 3 1/8 3/64 1,945 3 3/32 1/32 1,689
4.85 EU-E75 W.O. 3 3/8 2 2,586 P 3 1/16 1/16 1,994 3 1/32 3/64 1,746
4.85 EU-E75 2 3/8 OHLW 3 1/8 2 2,713 P 3 1/16 1,830 2 31/32 3/64 1,589
4.85 EU-E75 2 3/8 SL-H90 3 1/4 2 3,074 P 2 31/32 1/16 1,996 2 15/16 3/64 1,726

2 3/8 6.65 IU-E75 2 3/8 PAC2 2 7/8 1 3/8 2,813 P 2 25/32 9/64 2,455 2 23/32 7/64 2,055
6.65 EU-E75 NC26 3 3/8 1 3/4 4,125 B 3 3/16 5/64 2,467 3 5/32 1/16 2,204
6.65 EU-E75 2 3/8 SL-H90 3 1/4 2 3,074 P 3 1/32 3/32 2,549 2 31/32 1/16 1,996
6.65 EU-E75 2 3/8 OHSW 3 1/4 1 3/4 3,891 B 3 1/16 3/32 2,324 3 1/32 5/64 2,075

2 3/8 6.65 EU-X95 NC26 3 3/8 1 3/4 4,125 B 3 1/4 7/64 3,005 3 7/32 3/32 2,734
2
2 3/8 6.65 EU-G105 NC26 3 3/8 1 3/4 4,125 B 3 9/32 1/8 3,279 3 1/4 7/64 3,005

2 7/8 6.85 EU-E75 NC31 4 1/8 2 1/8 7,122 P 3 11/16 5/64 3,154 3 21/32 1/16 2,804
6.85 EU-E75 2 7/8 WO 4 1/8 2 7/16 4,318 P 3 5/8 5/64 3,216 3 19/32 1/16 2,876
6.85 EU-E75 2 7/8 OHLW 2 3 3/4 2 7/16 3,351 P 3 1/2 7/64 3,297 3 7/16 5/64 2,666
6.85 EU-E75 2 7/8 SL-H90 3 7/8 2 7/16 4,575 P 3 1/2 3/32 3,397 3 7/16 1/16 2,666

2 7/8 10.40 EU-E75 NC31 4 1/8 2 1/8 7,122 P 3 13/16 9/64 4,597 3 3/4 7/64 3,867
10.40 IU-E75 2 7/8 XH 4 1/4 1 7/8 7,969 P 3 23/32 9/64 4,357 3 21/32 7/64 3,664
10.40 IU-E75 NC262 3 3/8 1 3/4 4,125 B 3 3/8 11/64 4,125 3 11/32 5/32 3,839
10.40 EU-E75 2 7/8 OHSW 2 3 7/8 2 5/32 5,270 P 3 19/32 5/32 4,273 3 9/16 7/64 3,941
10.40 EU-E75 2 7/8 SL-H90 3 7/8 2 5/32 6,773 P 3 19/32 9/64 4,529 3 17/32 7/64 3,770
10.40 IU-E75 2 7/8 PAC2 3 1/8 1 1/2 3,439 P 3 1/8 15/64 3,439 3 1/8 15/64 3,439

2 7/8 10.40 EU-X95 NC31 4 1/8 2 7,918 P 3 29/32 3/16 5,726 3 27/32 5/32 4,969
10.40 EU-X95 2 7/8 SL-H902 3 7/8 2 5/32 6,773 P 3 11/16 3/16 5,702 3 5/8 5/32 4,915

2 7/8 10.40 EU-G105 NC31 4 1/8 2 7,918 P 3 15/16 13/64 6,110 3 7/8 11/64 5,345

2 7/8 10.40 EU-S135 NC31 4 3/8 1 5/8 10,167 P 4 1/16 17/64 7,694 4 15/64 6,893

3 1/2 9.50 EU-E75 NC38 4 3/4 3 7,688 P 4 13/32 1/8 5,773 4 11/32 3/32 4,797
9.50 EU-E75 NC38 4 3/4 2 11/16 10,864 P 4 13/32 1/8 5,773 4 11/32 3/32 4,797
9.50 EU-E75 3 1/2 OHLW 4 3/4 3 7,218 P 4 9/32 1/8 5,340 4 1/4 7/64 4,868
9.50 EU-E75 3 1/2 SL-H90 4 5/8 3 7,584 P 4 3/16 7/64 5,521 4 5/32 3/32 5,003

3 1/2 13.30 EU-E75 NC38 4 3/4 2 11/16 10,864 P 4 1/2 11/64 7,274 4 7/16 9/64 6,268
2
13.30 IU-E75 NC31 4 1/8 2 1/8 7,122 P 4 15/64 6,893 3 15/16 13/64 6,110
13.30 EU-E75 3 1/2 OHSW 4 3/4 2 11/16 10,387 P 4 13/32 3/16 7,278 4 11/32 5/32 6,299
13.30 EU-E75 3 1/2 H90 5 1/4 2 3/4 14,300 P 4 17/32 1/8 7,064 4 1/2 7/64 6,487
13.30 EU-X95 NC38 5 2 9/16 12,196 P 4 19/32 7/32 8,822 4 17/32 3/16 7,785
13.30 EU-X95 3 1/2 SL-H902 4 5/8 2 11/16 11,137 P 4 3/8 13/64 8,742 4 5/16 11/64 7,647
13.30 EU-X95 3 1/2 H90 5 1/4 2 3/4 14,300 P 4 5/8 11/64 8,826 4 9/16 9/64 7,646

3 1/2 13.30 EU-G105 NC38 5 2 7/16 13,328 P 4 21/32 1/4 9,879 4 19/32 7/32 8,822

3 1/2 13.30 EU-S135 NC40 5 3/8 2 7/16 17,958 P 5 9/32 12,569 4 29/32 15/64 10,768
13.30 EU-S135 NC38 5 2 1/8 15,909 P 4 13/16 21/64 12,614 4 23/32 9/32 10,957

14-20 14-21
PROPERTIES OF DRILL PIPES

AND TOOL JOINTS
Premium Class Class 2
Drill Pipe Min Box Make-up Min Box Make-up
Type Min Shoulder Torque Min Shoulder Torque
Upset New Tool Joint Data OD With for Min OD With for Min
Nom Nom and New New Make-up Tool Eccentric OD Tool Tool Eccentric OD Tool
6
Size Weight Grade Connection OD ID Torque Joint Wear Joint Joint Wear Joint
in lb/ft in in lb-ft in in lb-ft in in lb-ft

3 1/2 15.50 EU-E75 NC38 5 2 9/16 12,196 P 4 17/32 3/16 7,785 4 15/32 5/32 6,769

3 1/2 15.50 EU-X95 NC38 5 2 7/16 13,328 P 4 21/32 1/4 9,879 4 19/32 7/32 8,822

3 1/2 15.50 EU-G105 NC38 5 2 1/8 15,909 P 4 23/32 9/32 10,957 4 5/8 15/64 9,348
15.50 EU-G105 NC40 5 1/4 2 9/16 16,656 P 4 15/16 1/4 11,363 4 27/32 13/64 9,595

3 1/2 15.50 EU-S135 NC40 5 1/2 2 1/4 19,766 P 5 3/32 21/64 14,419 4 31/32 17/64 11,963

4 11.85 EU-E75 NC46 6 3 1/4 20,175 P 5 7/32 7/64 7,843 5 5/32 5/64 6,476
11.85 EU-E75 4 WO 5 3/4 3 7/16 17,285 P 5 7/32 7/64 7,843 5 5/32 5/64 6,476
11.85 EU-E75 4 OHLW 5 1/4 3 15/32 13,186 P 5 9/64 7,866 4 15/16 7/64 6,593
11.85 IU-E75 4 H90 5 1/2 2 13/16 21,224 P 4 7/8 7/64 7,630 4 27/32 3/32 6,962

4 14.00 IU-E75 NC40 5 1/4 2 13/16 14,092 P 4 13/16 3/16 9,017 4 3/4 5/32 7,877
14.00 EU-E75 NC46 6 3 1/4 20,175 P 5 9/32 9/64 9,233 5 7/32 7/64 7,843
14.00 IU-E75 4 SH2 4 5/8 2 9/16 9,102 P 4 7/16 15/64 8,782 4 3/8 13/64 7,817
14.00 EU-E75 4 OHSW 5 1/2 3 1/4 16,320 P 5 1/16 11/64 9,131 5 9/64 7,839
14.00 IU-E75 4 H90 5 1/2 2 13/16 21,224 P 4 15/16 9/64 8,986 4 7/8 7/64 7,630

4 14.00 IU-X95 NC40 5 1/4 2 11/16 15,404 P 4 15/16 1/4 11,363 4 27/32 13/64 9,595
14.00 EU-X95 NC46 6 3 1/4 20,175 P 5 3/8 3/16 11,363 5 5/16 5/32 9,937
14.00 IU-X95 4 H90 5 1/2 2 13/16 21,224 P 5 1/32 3/16 11,065 4 31/32 5/32 9,673

4 14.00 IU-G105 NC40 5 1/2 2 7/16 18,068 P 5 9/32 12,569 4 29/32 15/64 10,768
14.00 EU-G105 NC46 6 3 1/4 20,175 P 5 7/16 7/32 12,813 5 11/32 11/64 10,647
14.00 IU-G105 4 H90 5 1/2 2 13/16 21,224 P 5 3/32 7/32 12,481 5 1/32 3/16 11,065

4 14.00 EU-S135 NC46 6 3 23,538 P 5 9/16 9/32 15,787 5 1/2 1/4 14,288

4 15.70 IU-E75 NC40 5 1/4 2 11/16 15,404 P 4 7/8 7/32 10,179 4 25/32 11/64 8,444
15.70 EU-E75 NC46 6 3 1/4 20,175 P 5 5/16 5/32 9,937 5 1/4 1/8 8,535
15.70 IU-E75 4 H90 5 1/2 2 13/16 21,224 P 4 31/32 5/32 9,673 4 29/32 1/8 8,305

4 15.70 IU-X95 NC40 5 1/2 2 7/16 18,068 P 5 9/32 12,569 4 29/32 15/64 10,768
15.70 EU-X95 NC46 6 3 23,538 P 5 7/16 7/32 12,813 5 11/32 11/64 10,647
15.70 IU-X95 4 H90 5 1/2 2 13/16 21,224 P 5 3/32 7/32 12,481 5 1/32 3/16 11,065

4 15.70 EU-G105 NC46 6 3 23,538 P 5 15/32 15/64 13,547 5 13/32 13/64 12,085
15.70 IU-G105 4 H90 5 1/2 2 13/16 21,224 P 5 5/32 1/4 13,922 5 1/16 13/64 11,770

4 15.70 IU-S135 NC46 6 2 5/8 26,982 B 5 21/32 21/64 18,083 5 17/32 17/64 15,035
15.70 EU-S135 NC46 6 2 7/8 25,118 P 5 21/32 21/64 18,083 5 17/32 17/64 15,035

4 1/2 16.60 IEU-E75 4 1/2 FH 6 3 20,868 P 5 3/8 13/64 12,125 5 9/32 5/32 10,072
16.60 IEU-E75 NC46 6 1/4 3 1/4 20,396 P 5 13/32 13/64 12,085 5 11/32 11/64 10,647
16.60 IEU-E75 4 1/2 OHSW 5 7/8 3 3/4 16,346 P 5 7/16 13/64 11,862 5 3/8 11/64 10,375
16.60 EU-E75 NC50 6 5/8 3 3/4 22,836 P 5 23/32 5/32 11,590 5 11/16 9/64 10,773
16.60 IEU-E75 4 1/2 H90 6 3 1/4 23,355 P 5 11/32 3/16 12,215 5 9/32 5/32 10,642

14-22 14-23
PROPERTIES OF DRILL PIPES

AND TOOL JOINTS
Premium Class Class 2
Drill Pipe Min Box Make-up Min Box Make-up
Type Min Shoulder Torque Min Shoulder Torque
Upset New Tool Joint Data OD With for Min OD With for Min
Nom Nom and New New Make-up Tool Eccentric OD Tool Tool Eccentric OD Tool
6
Size Weight Grade Connection OD ID Torque Joint Wear Joint Joint Wear Joint
in lb/ft in in lb-ft in in lb-ft in in lb-ft

4 1/2 16.60 IEU-X95 4 1/2 FH 6 2 3/4 23,843 P 5 1/2 17/64 14,945 5 13/32 7/32 12,821
16.60 IEU-X95 NC46 6 1/4 3 1/4 20,396 P 5 17/32 17/64 15,035 5 7/16 7/32 12,813
16.60 EU-X95 NC50 6 5/8 3 3/4 22,836 P 5 27/32 7/32 14,926 5 25/32 3/16 13,245
16.60 IEU-X95 4 1/2 H90 6 3 27,091 P 5 15/32 1/4 15,441 5 3/8 13/64 13,102

4 1/2 16.60 IEU-G105 4 1/2 FH 6 2 3/4 23,843 P 5 9/16 19/64 16,391 5 15/32 1/4 14,231
16.60 IEU-G105 NC46 6 1/4 3 23,795 P 5 19/32 19/64 16,546 5 1/2 1/4 14,288
16.60 EU-G105 NC50 6 5/8 3 3/4 22,836 P 5 29/32 1/4 16,633 5 13/16 13/64 14,082
16.60 IEU-G105 4 1/2 H90 6 3 27,091 P 5 1/2 17/64 16,264 5 7/16 15/64 14,625

4 1/2 16.60 IEU-S135 NC46 6 1/4 2 3/4 26,923 P 5 25/32 25/64 21,230 5 21/32 21/64 18,083
16.60 EU-S135 NC50 6 5/8 3 1/2 27,076 P 6 1/16 21/64 21,017 5 31/32 9/32 18,367

4 1/2 20.00 IEU-E75 4 1/2 FH 6 3 20,868 P 5 15/32 1/4 14,231 5 3/8 13/64 12,125
20.00 IEU-E75 NC46 6 1/4 3 23,795 P 5 1/2 1/4 14,288 5 13/32 13/64 12,085
20.00 EU-E75 NC50 6 5/8 3 5/8 24,993 P 5 13/16 13/64 14,082 5 3/4 3/16 12,415
20.00 IEU-E75 4 1/2 H90 6 3 27,091 P 5 13/32 7/32 13,815 5 11/32 3/16 12,215

4 1/2 20.00 IEU-X95 4 1/2 FH 6 2 1/2 26,559 P 5 5/8 21/64 17,861 5 17/32 9/32 15,665
20.00 IEU-X95 NC46 6 1/4 2 3/4 26,923 P 5 21/32 21/64 18,083 5 9/16 9/32 15,787
20.00 EU-X95 NC50 6 5/8 3 1/2 27,076 P 5 15/16 17/64 17,497 5 7/8 15/64 15,776
20.00 IEU-X95 4 1/2 H90 6 3 27,091 P 5 9/16 19/64 17,929 5 15/32 1/4 15,441

4 1/2 20.00 IEU-G105 NC46 6 1/4 2 1/2 29,778 P 5 23/32 23/64 19,644 5 5/8 5/16 17,311
20.00 EU-G105 NC50 6 5/8 3 1/2 27,076 P 6 1/32 5/16 20,127 5 29/32 1/4 16,633

4 1/2 20.00 EU-S135 NC50 6 5/8 2 7/8 36,398 P 6 7/32 13/32 25,569 6 3/32 11/32 21,914

5 19.50 IEU-E75 NC50 6 5/8 3 3/4 22,836 P 5 7/8 15/64 15,776 5 13/16 13/64 14,082

5 19.50 IEU-X95 NC50 6 5/8 3 1/2 27,076 P 6 1/32 5/16 20,127 5 15/16 17/64 17,497
19.50 IEU-X95 5 H90 6 1/2 3 1/4 31,084 P 5 27/32 19/64 19,862 5 3/4 1/4 17,116

5 19.50 IEU-G105 NC50 6 5/8 3 1/4 31,025 P 6 3/32 11/32 21,914 6 19/64 19,244
19.50 IEU-G105 5 H90 6 1/2 3 35,039 P 5 29/32 21/64 21,727 5 13/16 9/32 18,940

5 19.50 IEU-S135 NC50 6 5/8 2 3/4 38,044 P 6 5/16 29/64 28,381 6 3/16 25/64 24,645
19.50 IEU-S135 5 1/2 FH 7 1/4 3 1/2 43,490 P 6 3/4 3/8 28,737 6 5/8 5/16 24,412

5 25.60 IEU-E75 NC50 6 5/8 3 1/2 27,076 P 6 1/32 5/16 20,127 5 15/16 17/64 17,497
25.60 IEU-E75 5 1/2 FH 7 3 1/2 37,742 B 6 1/2 1/4 20,205 6 13/32 13/64 17,127

5 25.60 IEU-X95 NC50 6 5/8 3 34,680 P 6 7/32 13/32 25,569 6 3/32 11/32 21,914
25.60 IEU-X95 5 1/2 FH 7 3 1/2 37,742 B 6 21/32 21/64 25,483 6 9/16 9/32 22,294

5 25.60 IEU-G105 NC50 6 5/8 2 3/4 38,044 P 6 9/32 7/16 27,437 6 5/32 3/8 23,728
25.60 IEU-G105 5 1/2 FH 7 1/4 3 1/2 43,490 P 6 23/32 23/64 27,645 6 5/8 5/16 24,412

5 25.60 IEU-S135 5 1/2 FH 7 1/4 3 1/4 47,230 B 6 15/16 15/32 35,446 6 13/16 13/32 30,943

14-24 14-25
PROPERTIES OF DRILL PIPES

AND TOOL JOINTS
Premium Class Class 2
Drill Pipe Min Box Make-up Min Box Make-up
Type Min Shoulder Torque Min Shoulder Torque
Upset New Tool Joint Data OD With for Min OD With for Min
Nom Nom and New New Make-up Tool Eccentric OD Tool Tool Eccentric OD Tool
6
Size Weight Grade Connection OD ID Torque Joint Wear Joint Joint Wear Joint
in lb/ft in in lb-ft in in lb-ft in in lb-ft

5 1/2 21.90 IEU-E75 5 1/2 FH 7 4 33,560 P 6 15/32 15/64 19,172 6 13/32 13/64 17,127

5 1/2 21.90 IEU-X95 5 1/2 FH 7 3 3/4 37,742 B 6 5/8 5/16 24,412 6 17/32 17/64 21,246
21.90 IEU-X95 5 1/2 H90 7 3 1/2 35,454 P 6 3/16 21/64 24,414 6 3/32 9/32 21,349

5 1/2 21.90 IEU-G105 5 1/2 FH 7 1/4 3 1/2 43,490 P 6 23/32 23/64 27,645 6 19/32 19/64 23,350

5 1/2 21.90 IEU-S135 5 1/2 FH 7 1/2 3 53,302 P 6 15/16 15/32 35,446 6 13/16 13/32 30,943

5 1/2 24.70 IEU-E75 5 1/2 FH 7 4 33,560 P 6 9/16 9/32 22,294 6 15/32 15/64 19,172

5 1/2 24.70 IEU-X95 5 1/2 FH 7 1/4 3 1/2 43,490 P 6 23/32 23/64 27,645 6 19/32 19/64 23,350

5 1/2 24.70 IEU-G105 5 1/2 FH 7 1/4 3 1/2 43,490 P 6 25/32 25/64 29,836 6 11/16 11/32 26,560

5 1/2 24.70 IEU-S135 5 1/2 FH 7 1/2 3 52,302 P 7 1/32 33/64 38,901 6 7/8 7/16 33,180

6 5/8 25.20 IEU-E75 6 5/8 FH 8 5 44,196 P 7 7/16 1/4 26,810 7 3/8 7/32 24,100
IEU-X95 6 5/8 FH 8 5 44,196 P 7 5/8 11/32 35,139 7 1/2 9/32 29,552
IEU-G105 6 5/8 FH 8 1/4 4 3/4 51,742 P 7 11/16 5/8 37,983 7 19/32 21/64 33,730
IEU-S135 6 5/8 FH 8 1/2 4 1/4 65,535 P 7 29/32 31/64 48,204 7 25/32 27/64 42,312

6 5/8 27.70 IEU-E75 6 5/8 FH 8 5 44 196 P 7 1/2 9/32 29,552 7 13/32 15/64 25,451
IEU-X95 6 5/8 FH 8 1/4 4 3/4 51,742 P 7 11/16 3/8 37,983 7 9/16 5/16 32,329
IEU-G105 6 5/8 FH 8 1/4 4 3/4 51,742 P 7 3/4 13/32 40,860 7 21/32 23/64 36,556
IEU-S135 6 5/8 FH 8 1/2 4 1/4 65,535 P 8 17/32 52,714 7 27/64 29/64 45,241


Recommended minimum OD and make-up torque of 4 In calculation of torsional strengths of tool joints, both
weld-on type tool joints based on torsional strength of box new and worn, the bevels of the tool joint shoulders are
and drill pipe. disregarded. This thickness measurement should be
Tool joint diameters specified are required to retain made in the plane of the face from the ID of the counter
torsional strength in the tool joint comparable to the bore to the outside diameter of the box, disregarding
torsional strength of the attached drill pipe. These should the bevels.
be adequate for all service. Tool joints with torsional
strengths considerably below that of the drill pipe may be 5 Any tool joint with an outside diameter less than API
adequate for much drilling service. bevel diameter should be provided with a minimum
1/32" depth x 45 bevel on the outside and inside
Footnotes: diameter of the box shoulder and outside diameter of
the pin shoulder.
1 The use of outside diameters (OD) smaller than those
listed in the table may be acceptable due to special service 6 P = Pin limit, B = Box limit.
requirements.

2 Tool joint with dimensions shown has lower torsional yield


ratio than the 0.80 which is generally used. This table taken from API Recommended Practice 7G, Sixteenth
Edition, December 1, 1998.
3 Recommended make-up torque is based on 72,000 ps
stress.

14-26 14-27
MECHANICAL PROPERTIES

OF DRILL PIPE
1 2 3
Nominal Torsional Data Tensile Data
Size Weight Torsional Yield Strength Load at Minimum Yield Strength
OD New lb-ft lb
in lb/ft Class E75 X95 G105 S135 E75 X95 G105 S135

2 3/8 4.85 New 4,763 6,033 6,668 8,574 97,817 123,902 136,944 176,071
Premium 3,725 4,719 5,215 6,705 76,893 97,398 107,650 138,407
Class 2 3,224 4,083 4,513 5,802 66,686 84,469 93,360 120,035
6.65 New 6,250 7,917 8,751 11,251 138,214 175,072 193,500 248,786
Premium 4,811 6,093 6,735 8,659 107,616 136,313 150,662 193,709
Class 2 4,130 5,232 5,782 7,434 92,871 117,636 130,019 167,167

2 7/8 6.85 New 8,083 10,238 11,316 14,549 135,902 172,143 190,263 244,624
Premium 6,332 8,020 8,865 11,397 106,946 135,465 149,725 192,503
Class 2 5,484 6,946 7,677 9,871 92,801 117,549 129,922 167,043
10.40 New 11,554 14,635 16,176 20,798 214,344 271,503 300,082 385,820
Premium 8,858 11,220 12,401 15,945 166,535 210,945 233,149 299,764
Class 2 7,591 9,615 10,627 13,663 143,557 181,839 200,980 258,403

3 1/2 9.50 New 14,146 17,918 19,805 25,463 194,264 246,068 271,970 349,676
Premium 11,094 14,052 15,531 19,968 152,979 193,774 214,171 275,363
Class 2 9,612 12,176 13,457 17,302 132,793 168,204 185,910 239,027
13.30 New 18,551 23,498 25,972 33,392 271,569 343,988 380,197 488,825
Premium 14,361 18,191 20,106 25,850 212,150 268,723 297,010 381,870
Class 2 12,365 15,663 17,312 22,258 183,398 232,304 256,757 330,116
15.50 New 21,086 26,708 29,520 37,954 322,775 408,848 451,885 580,995
Premium 16,146 20,452 22,605 29,063 250,620 317,452 350,868 451,115
Class 2 13,828 17,515 19,359 24,890 215,967 273,558 302,354 388,741

4 11.85 New 19,474 24,668 27,264 35,054 230,755 292,290 323,057 415,360
Premium 15,310 19,392 21,433 27,557 182,016 230,554 254,823 327,630
Class 2 13,281 16,823 18,594 23,907 158,132 200,301 221,385 284,638
14.00 New 23,288 29,498 32,603 41,918 285,359 361,454 399,502 513,646
Premium 18,196 23,048 25,474 32,752 224,182 283,963 313,854 403,527
Class 2 15,738 19,935 22,034 28,329 194,363 246,193 272,108 349,852
15.70 New 25,810 32,692 36,134 46,458 324,118 410,550 453,765 583,413
Premium 20,067 25,418 28,094 36,120 253,851 321,544 355,391 456,931
Class 2 17,315 21,932 24,241 31,166 219,738 278,335 307,633 395,528

4 1/2 13.75 New 25,907 32,816 36,270 46,633 270,034 342,043 378,047 486,061
Premium 20,403 25,844 28,564 36,725 213,258 270,127 298,561 383,864
Class 2 17,715 22,439 24,801 31,887 185,389 234,827 259,545 333,701
16.60 New 30,807 39,022 43,130 55,453 330,558 418,707 462,781 595,004
Premium 24,139 30,576 33,795 43,450 260,165 329,542 364,231 468,297
Class 2 20,908 26,483 29,271 37,634 225,771 285,977 316,080 406,388
20.00 New 36,901 46,741 51,661 66,421 412,358 522,320 577,301 742,244
Premium 28,683 36,332 40,157 51,630 322,916 409,026 452,082 581,248
Class 2 24,747 31,346 34,645 44,544 279,502 354,035 391,302 503,103
22.82 New 40,912 51,821 57,276 73,641 471,239 596,903 659,734 848,230
Premium 31,587 40,010 44,222 56,856 367,566 465,584 514,593 661,620
Class 2 27,161 34,404 38,026 48,890 317,497 402,163 444,496 571,495

14-28 14-29
MECHANICAL PROPERTIES

OF DRILL PIPE
1 2 3
Nominal Torsional Data Tensile Data
Size Weight Torsional Yield Strength Load at Minimum Yield Strength
OD New lb-ft lb
in lb/ft Class E75 X95 G105 S135 E75 X95 G105 S135

5 16.25 New 35,044 44,389 49,062 63,079 328,073 415,559 459,302 590,531
Premium 27,607 34,969 38,650 49,693 259,155 328,263 362,817 466,479
Class 2 23,974 30,368 33,564 43,154 225,316 285,400 315,442 405,568

19.50 New 41,167 52,144 57,633 74,100 395,595 501,087 553,833 712,070
Premium 32,285 40,895 45,199 58,113 311,535 394,612 436,150 560,764
Class 2 27,976 35,436 39,166 50,356 270,432 342,548 378,605 486,778
25.60 New 52,257 66,192 73,159 94,062 530,144 671,515 742,201 954,259
Premium 40,544 51,356 56,762 72,979 414,690 525,274 580,566 746,443
Class 2 34,947 44,267 48,926 62,905 358,731 454,392 502,223 645,715

5 1/2 19.20 New 44,074 55,826 61,703 79,332 372,181 471,429 521,053 669,925
Premium 34,764 44,035 48,670 62,575 294,260 372,730 411,965 529,669
Class 2 30,208 38,263 42,291 54,374 255,954 324,208 358,335 460,717
21.90 New 50,710 64,233 70,994 91,278 437,116 553,681 611,963 786,809
Premium 39,863 50,494 55,809 71,754 344,780 436,721 482,692 620,604
Class 2 34,582 43,804 48,414 62,247 299,533 379,409 419,346 539,160
24.70 New 56,574 71,660 79,204 101,833 497,222 629,814 696,111 894,999
Premium 44,320 56,139 62,048 79,776 391,285 495,627 547,799 704,313
Class 2 38,383 48,619 53,737 69,090 339,533 430,076 475,347 611,160

6 5/8 25.20 New 70,580 89,402 98,812 127,044 489,464 619,988 685,250 881,035
Premium 55,766 71,522 79,050 101,635 387,466 490,790 542,452 697,438
Class 2 48,497 61,430 67,896 87,295 337,236 427,166 472,131 607,026
27.70 New 76,295 96,640 106,813 137,330 534,199 676,651 747,877 961,556
Premium 60,192 77,312 85,450 109,864 422,419 535,064 591,387 760,354
Class 2 52,308 66,257 73,231 94,155 367,455 465,443 514,437 661,419


New Drill Pipe Torsional and Tensile Data, Used Drill Pipe Premium Class
Torsional and Tensile Data API Premium Class, and Used 2 Based on the shear strength equal to 57.7 percent of
Drill Pipe Torsional and Tensile Data API Class 2. minimum yield strength.
Torsional data based on 20 percent uniform wear on
Footnotes: outside diameter.
3 Tensile data based on 20 percent uniform wear on outside
1 New weight, nominal with threads and couplings. diameter.

New Drill Pipe Class 2


2 Based on the shear strength equal to 57.7 percent of 2 Based on the shear strength equal to 57.7 percent of
minimum yield strength and nominal wall thickness. minimum yield strength.
Minimum torsional yield strength calculated from Torsional data based on 30 percent uniform wear on
equation in RP7G, (16th edition) Appendix A, paragraph outside diameter.
A.15. 3 Tensile data based on 30 percent uniform wear on outside
3 Tensile data based on minimum values. diameter.
Minimum tensile strength calculated from equation in API
RP7G, (16th edition) Appendix A, paragraph A.13.

This table taken from API Recommended Practice 7G, Sixteenth


Edition, December 1, 1998.

14-30 14-31
HEAVY WALLED DRILL PIPE

Tube
Nominal Wall
Size ID Thickness
in in in
3 1/2 2 1/16 0.719
3 1/2 2 1/4 0.625
4 2 9/16 0.719
4 1/2 2 3/4 0.875
5 3 1.000
5 1/2 3 3/8 1.063
6 5/8 4 1/2 1.063

Tool Joint
Nominal Connection
Size Size OD ID
in in in
3 1/2 NC38 (3 1/2 IF) 4 3/4 2 3/16
3 1/2 NC38 (3 1/2 IF) 4 3/4 2 3/8
4 NC40 (4 FH) 5 1/4 2 11/16
4 1/2 NC46 (4 IF) 6 1/4 2 7/8
5 NC50 (4 1/2 IF) 6 5/8 3 1/16
5 1/2 5 1/2 FH 7 3 1/2
6 5/8 6 5/8 FH 8 4 1/2

Approximate Weight
Nominal (including tube & joints)
Size Wt/ft Wt/Jt 30 ft
in lb lb
3 1/2 25.3 760
3 1/2 23.2 695
4 27.2 815
4 1/2 41.0 1,230
5 49.3 1,480
5 1/2 57.0 1,880
6 5/8 70.8 2,290

14-32
DRILL BIT SIZES

Rotary Size of Rotary Size of


Pin Bit Pin Bit
Connection inches Connection inches
2 3/8 REG 3 3/4 6 5/8 REG 9 1/2
3 7/8 9 5/8
4 1/8 9 3/4
4 1/4 9 7/8
4 3/8 10 5/8
4 1/2 11
2 7/8 REG 4 5/8 11 1/2
4 3/4 11 5/8
4 7/8 11 3/4
5 12
3 1/2 REG 5 1/8 12 1/4
5 3/8 13 1/2
5 5/8 13 3/4
5 3/4 14 3/4
5 7/8 15
6 16
6 1/8 17
6 1/4 17 1/2
6 3/8 18 1/2
6 1/2 7 5/8 REG 14 1/2
6 5/8 14 3/4
6 3/4 15
7 16
7 3/8 17
4 1/2 REG 7 1/2 17 1/2
7 5/8 18 1/2
7 3/4 20
7 7/8 22
8 1/8 23
8 3/8 24
8 1/2 26
8 5/8 8 5/8 REG 18 5/8
8 3/4 20
9 22
9 3/8 23
24
26
27
and larger

14-33
HOLE CURVATURE

BUILD BUILD
RATE RADIUS OF HOLE RATE RADIUS OF HOLE
DEGREES DEGREES
per 100 ft R1 R2 per 100 ft R1 R2
(30m) FEET METERS (30m) FEET METERS
2 2865 859 105 55 16
4 1432 430 110 52 16
6 955 286 115 50 15
8 716 215 120 48 14
10 573 172 125 46 14
12 477 143 130 44 13
14 409 123 135 42 13
16 358 107 140 41 12
18 318 95 145 40 12
20 286 86 150 38 11
22 260 78 155 37 11
24 239 72 160 36 11
26 220 66 165 35 10
28 205 61 170 34 10
30 191 57 175 33 10
32 179 54 180 32 10
34 169 51 185 31 9
36 159 48 190 30 9
38 151 45 195 29 9
40 143 43 200 29 9
42 136 41 210 27 8
44 130 39 220 26 8
46 125 37 230 25 7
48 119 36 240 24 7
50 115 34 250 23 7
52 110 33 260 22 7
54 106 32 270 21 6
56 102 31 280 20 6
58 99 30 290 20 6
60 95 29 300 19 6
62 92 28
64 90 27 FORMULA:
66 87 26
Arc Length (ft)
68 84 25 R1 =
70 82 25 .017453 x Angle()
72 80 24
74 77 23 Arc Length (m)
76 75 23 R2 =
78 73 22 .017453 x Angle()
80 72 21
82 70 21
84 68 20
86 67 20
88 65 20
90 64 19
92 62 19
94 61 18
96 60 18
98 58 18
100 57 17

14-34
GRIFFITH HYDRAULIC GRIFFITH HYDRAULIC
MECHANICAL DRILLING JARS MECHANICAL DRILLING JARS
SERIES 380 447 339 474 340 SERIES 450 336-20 354 381
Tool O.D. In 4.75 6.25 6.50 6.50 6.75
Tool O.D. In 7.00 8.00 9.00 9.50
(+API Drill (+API Drill
Collar Tolerance) mm 121 159 165 165 171
Collar Tolerance) mm 178 203 229 241

Max Recommended In 7.87 9.87 9.87 12.25 12.25


Max Recommended In 12.25 17.50 26.00 26.00
Hole Diameter Hole Diameter
(Hole Openers Not mm 200 251 251 311 311
(Hole Openers Not mm 311 445 660 660
Recommended) Recommended)
Tool I.D. In 2.25 2.25 2.25 2.75 2.50
Tool I.D. In 2.50 2.81 2.81 2.81

mm 57 57 57 70 64 mm 64 71 71 71

Length ft 12.70 16.30 16.30 18.50 15.00


Length ft 15.00 15.50 15.00 15.00
(Latched) (Latched)
m 3.90 5.00 5.00 5.60 4.60 m 4.60 4.70 4.60 4.60

Preset STD: lbs 40000 90000 90000 90000 90000


Preset STD: lbs 90000 95000 100000 100000
Release Up Release Up
(Down=45% of Up) daN 18000 40000 40000 40000 40000
(Down=45% of Up) daN 40000 42000 44000 44000

Preset MAX: lbs 55000 140000 140000 140000 140000 Preset MAX: lbs 140000 150000 155000 155000
Release Up Release Up
(Down=45% of Up) daN 24000 62000 62000 62000 62000 (Down=45% of Up) daN 62000 67000 69000 69000

Weight lbs 550 1300 1400 1500 1400


Weight lbs 1540 2200 2700 3000

kg 250 590 640 680 640 kg 700 1000 1200 1400

Max Load During lbs 75000 160000 160000 180000 190000


Max Load During lbs 190000 220000 250000 250000
Hydraulic Delay Hydraulic Delay
daN 33000 71000 71000 80000 85000 daN 85000 98000 111000 111000

Max Tensile lbs 354000 755000 755000 865000 828000


Max Tensile lbs 828000 965000 1225000 1225000
Load After Load After
Jarring daN 157000 336000 336000 385000 368000
Jarring daN 368000 429000 545000 545000

Max Torsional Load lb-ft 16000 41000 41000 41000 40000


Max Torsional Load lb-ft 40000 68000 110000 112000
(To Yield Body (To Yield Body
Connections) Nm 22000 56000 56000 56000 54000
Connections) Nm 54000 92000 149000 152000

Pump Open Pump Open


in2 6.50 9.60 9.60 11.00 11.00 in2 11.00 14.20 15.90 15.90
Area Area
cm2 42.00 62.00 62.00 71.00 71.00 cm2 71.00 92.00 103.00 103.00

15-1 15-2

GRIFFITH DOUBLE ACTING GRIFFITH DOUBLE ACTING
HYDRAULIC MECHANICAL HYDRAULIC MECHANICAL
DRILLING JARS DRILLING JARS
SERIES 431 428 440 441 SERIES 480 411 437
Nominal Size In 4.75 6.50 6.75 7.00
Nominal Size In 7.12 8.00 9.50
(+API Drill (+API Drill
Collar Tolerance) mm 121 165 171 178
Collar Tolerance) mm 181 203 241

Max Recommended In 7.87 9.87 12.25 12.25


Max Recommended In 12.25 17.50 26.00
Hole Diameter Hole Diameter
(Hole Openers Not mm 200 251 311 311
(Hole Openers Not mm 311 445 660
Recommended) Recommended)
I.D. In 2.25 2.25 2.50 2.50 I.D. In 2.50 2.81 3.00
mm 57 57 64 64 mm 64 71 76
Length ft 19.80 22.50 23.00 23.00 Length ft 23.00 22.50 23.00
(Latched) m 6.00 6.90 7.00 7.00 (Latched) m 7.00 6.90 7.00
Weight lbs 850 2100 2250 2450 Weight lbs 2450 3100 5200
kg 390 950 1020 1110 kg 1110 1410 2360
Sroke Up in 6.00 6.00 6.00 6.00 Sroke Up in 6.00 6.00 6.00
(Free Stroke) mm 152 152 152 152 (Free Stroke) mm 152 152 152
Stroke Down in 6.00 6.00 6.00 6.00 Stroke Down in 6.00 6.00 6.00
(Free Stroke) mm 152 152 152 152 (Free Stroke) mm 152 152 152
Preset STD: lbf 40000 90000 90000 90000 Preset STD: lbf 90000 95000 100000
Release Up kN 180 400 400 400 Release Up kN 400 420 440
Preset MAX: lbf 55000 140000 140000 140000 Preset MAX: lbf 140000 150000 155000
Release Up kN 240 620 620 620 Release Up kN 620 670 690
Preset STD: lbf 18000 40500 40500 40500
Preset STD: lbf 40500 42800 45000
Release Down Release Down
(Tolerance 5%) kN 80 180 180 180
(Tolerance 5%) kN 180 190 200

Preset MAX: lbf 27000 63000 63000 63000


Preset MAX: lbf 63000 67500 69800
Release Down Release Down
(Tolerance 5%) kN 120 280 280 280
(Tolerance 5%) kN 280 300 310

Max Load During lbf 84000 160000 190000 190000 Max Load During lbf 190000 300000 350000
Hydraulic Delay kN 370 710 850 850 Hydraulic Delay kN 850 1300 1600
Max Tensile lbf 362000 755000 823000 823000 Max Tensile lbf 1000000 1000000 1225000
Load After Jarring kN 1600 3400 3700 3700 Load After Jarring kN 4400 4400 5400
Max Torsional Load lb-ft 115000 37500 44500 53000
Max Torsional Load lb-ft 70000 73500 95000
(To Yield Body (To Yield Body
Connections) Nm 15600 50800 60300 71900
Connections) Nm 94900 99700 128800

Torsional Load To lb-ft 28500 62000 74500 74500


Torsional Load To lb-ft 100000 102000 136000
Yield Splines Yield Splines
(Reference Only) Nm 38600 84100 101000 101000
(Reference Only) Nm 135600 138300 184400

Pump Open Pump Open


in2 6.5 9.6 11.0 11.0 in2 11.0 14.2 15.9
Area Area
cm2 42 62 71 71 cm2 71 92 103

15-3 15-4
BOWEN POWERSTROKE
HYDRAULIC UP/DOWN DRILLING
JARS
Assembly Part Number 156353 155790 156426
Outside Diameter In 4.75 6.25 7.75

mm 121 159 197

Inside Diameter In 2.25 2.75 3.06

mm 57 70 78

Maximum Up tons 45 85 150


Jar Load
kN 400 756 1334

Maximum Down tons 45 85 150


Jar Load
kN 400 756 1334

Lift Load tons 273 400 663


After Jarring
kN 2429 3559 5898

Approximate ft 30 30 31
Length Open
m 9.1 9.1 9.4

Pump Open
in2 7.1 12.2 16.8
Area
cm2 46 79 108

15-5
GRIFFITH SHOCK TOOLS GRIFFITH SHOCK TOOLS

SERIES 155 146 150 147 154 SERIES 148 160 139 151 138
Nominal Size In 4.75 6.25 6.50 6.75 7.00
Nominal Size In 8.00 8.00 9.00 9.50 10.00
(+API Drill (+API Drill
Collar Tolerance) mm 121 159 165 171 178
Collar Tolerance) mm 203 203 229 241 254

Max Recommended In 6.75 8.50 8.50 8.75 8.75


Max Recommended In 12.25 12.25 13.75 17.50 17.50
Hole Diameter Hole Diameter
(Hole Openers Not mm 171 216 216 222 222
(Hole Openers Not mm 311 311 349 445 445
Recommended) Recommended)
Inside Diameter In 2.00 2.00 2.00 2.25 2.25
Inside Diameter In 2.50 2.75 2.81 2.81 2.81

mm 51 51 51 57 57 mm 64 70 71 71 71

Length ft 8.50 9.40 9.40 9.40 9.40


Length ft 9.40 12.50 9.40 10.80 10.80

m 2.59 2.87 2.87 2.87 2.87 m 2.87 3.81 2.87 3.29 3.29

Weight lbs 375 720 800 850 930


Weight lbs 1200 1600 1500 2200 2300

kg 170 330 360 390 420 kg 540 730 680 1000 1000

Axial Load To lbs 74000 100000 100000 100000 100000


Axial Load To lbs 125000 125000 110000 100000 100000
Fully Compress Fully Compress
Tool daN 330000 440000 44000 44000 44000
Tool daN 56000 56000 49000 44000 44000

Tensile Load lbs 380000 555000 555000 593000 593000


Tensile Load lbs 770000 872000 853000 1207000 1042000
At Yield At Yield
daN 169000 247000 247000 264000 264000 daN 342000 388000 379000 537000 463000

Maximum lb-ft 17000 41000 50000 54000 54000


Maximum lb-ft 79000 79000 115000 109000 157000
Torsional Load Torsional Load
Nm 23000 56000 68000 73000 73000 Nm 107000 107000 156000 148000 213000

Pump Open Pump Open


in2 11.00 15.90 15.90 17.70 17.70 in2 23.80 30.70 30.70 38.50 41.30
Area Area
cm2 71 103 103 114 114 cm2 154 198 198 248 266

Spring Rate lb/in 29000 35000 35000 35000 35000


Spring Rate lb/in 35000 31000 35000 25000 25000

N/mm 5100 6100 6100 6100 6100 N/mm 6100 5400 6100 4400 4400

Opening Travel In 1.00 1.75 1.75 1.75 1.75 Opening Travel In 1.75 1.75 1.75 3.30 3.30
mm 25 44 44 44 44 mm 44 44 44 84 84
Closing Travel In 2.50 2.90 2.90 3.00 3.00 Closing Travel In 3.60 4.00 3.20 4.00 4.00
mm 64 74 74 76 76 mm 91 102 81 102 102

15-6 15-7
GRIFFITH SHOCK TOOLS

SERIES 157 143 113


Nominal Size In 11.00 12.00 14.00
(+API Drill
Collar Tolerance) mm 279 305 356

Max Recommended In 17.50 17.50 26.00


Hole Diameter
(Hole Openers Not mm 445 445 660
Recommended)
Inside Diameter In 2.81 2.81 3.00

mm 71 71 76

Length ft 14.00 12.20 15.00

m 4.27 3.72 4.57

Weight lbs 3200 3400 5200

kg 1500 1500 2400

Axial Load To lbs 100000 100000 140000


Fully Compress
Tool daN 44000 44000 62000

Tensile Load lbs 808000 1337000 1865000


At Yield
daN 359000 595000 830000

Maximum lb-ft 187000 244000 400000


Torsional Load
Nm 254000 331000 542000

Pump Open
in2 11.00 11.80 12.60
Area
cm2 71 76 81

Spring Rate lb/in 15000 15000 22000

N/mm 2600 2600 3900

Opening Travel In 2.50 2.50 2.00


mm 64 64 51
Closing Travel In 7.00 7.00 7.00
mm 178 178 178

15-8

Anda mungkin juga menyukai