0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
14 tayangan1 halaman
The assembly report summarizes the installation of a gear unit. It was found to have no offset or angular misalignments between the high speed shaft and low speed shaft. Measurements were taken of coupling flange distances and assembly temperature. The gear unit was fastened to its foundation with pins and lubricated according to specifications.
The assembly report summarizes the installation of a gear unit. It was found to have no offset or angular misalignments between the high speed shaft and low speed shaft. Measurements were taken of coupling flange distances and assembly temperature. The gear unit was fastened to its foundation with pins and lubricated according to specifications.
The assembly report summarizes the installation of a gear unit. It was found to have no offset or angular misalignments between the high speed shaft and low speed shaft. Measurements were taken of coupling flange distances and assembly temperature. The gear unit was fastened to its foundation with pins and lubricated according to specifications.
Measured assembly temperature ________C Height correction of shaft centres observed Grease filling completed / grease quality ___________________________ Gear unit fastened to foundation with pins
Lubrication of gear unit Gear unit connected to central lubrication
flow _______ l/min Oil type: mineral Check of oil level height synthetic VG class _______________ Operation of pressure lubrication _________C _______bar
Date _______________________ Approved: _______________________________________________
Bearings And Bearing Metals: A Treatise Dealing with Various Types of Plain Bearings, the Compositions and Properties of Bearing Metals, Methods of Insuring Proper Lubrication, and Important Factors Governing the Design of Plain Bearings