1. MANUFACTURERS WARRANTY AND BUYERS RESPONSIBILITY .................................................................. 2
2. USERS RESPONSIBILITY IN CASE OF DAMAGE................................................................................................... 2
Moventas Santasalo Oy 1(2)
Manufacturers warranty and buyers responsibility MDI-110-A-EN 20.02.2007
1. MANUFACTURERS WARRANTY AND BUYERS RESPONSIBILITY
Moventas Santasalo Oy warrants that all products product, increase the risk of damage or shorten the manufactured by it comply with terms to be agreed life cycle of the product or its components. upon separately. For the warranty to be applicable, Transport, installation, lubrication, use, maintenance the customer shall have followed Moventas and inspections shall be performed by qualified Santasalo Oys guidelines, national and international personnel to prevent accidents and damage to the standards and norms, careful procedures and machinery. generally accepted mechanical engineering methods. All parts of the drive system must be compatible. The This set of instructions is not exhaustive and may not overall system should never run at the critical always be applicable in all respects to all products rotational speed or exhibit torsional or other and components with which it has been supplied. In vibrations that could damage the gears. The special cases, instructions pertaining to specific uses responsibility for this lies with the main supplier of the shall be taken into consideration. Moventas equipment, as it is most often the only party that has Santasalo Oy reserves the right to modify the content comprehensive information of all factors affecting the of this set of instructions without separate notification. matter. Moventas Santasalo Oy is not liable for damage Moventas Santasalo Oy must be informed without caused by transportation, storage, installation, use or delay if a significant risk relating to the environment other actions to the product. Moventas Santasalo Oy or the operating staff is about to occur due to a defect is not liable for damage to the product resulting from in the machine. factors external to the delivery content, such as the corrosive effects of weather, leakage or welding The warranty shall be valid only if the instructions currents or magnetism, which may damage the provided by Moventas Santasalo Oy are complied with.
2. USERS RESPONSIBILITY IN CASE OF DAMAGE
In the event of damage during the validity of the warranty, the users responsibility is to retain the gear unit as intact as possible until such a time as Moventas Santasalo Oy has issued instructions on further measures. The following may void the warranty: failure to provide maintenance continued use after detection of damage gear unit load and use in violation of the technical specifications failure to report any circumstance that essentially contributed to the occurrence of the damage refusal to provide reliable maintenance data failure to comply with instructions from Moventas Santasalo Oy failure to comply with instructions from Moventas Santasalo Oy in connection with damage