Our organisation is flat and effective, enabling us to serve all our clients
with competence and efficiency. The high quality of our products,
production activities and internal logistics provides our delivery channels
with a competitive service concept and helps to reach a satisfied end user.
QUALITY AND
SORMAT ENVIRONMENT
CERTIFIED
S FS
OR
G A N IZ AT I O N
ISO 9001
ISO 14001
An integrated idea of quality consists of both product quality, and the quality of services.
A high customer satisfaction is achieved by managing both of these aspects.
Service quality means that we are competitive, we serve our customers, and we gain our planned
results doing it effectively.
One of the essential demands for our activities is a high productivity and a high delivery performance.
Everybody in Sormat group is responsible to implement a quality liability that aims to a stable and
satisfied customer relation.
Products are designed and manufactured according to customers demands, taking in account
environmental impacts during the life cycle of the product. Manufacturing processes are planned and
carried out so, that the environmental impacts are minimized.
The amount of waste is minimized and the becoming waste is handled in an acceptable way.
We are working so that there is a continuous awareness of environmental aspects and risks.
1
INDEX SORMAT
PRODUCTS
GENERAL
Quality and environmental policy Essential subjects of quality and environmental policies ..............1
Fixing guide Right fixings for right base materials .........................................4
Base materials Different base materials and suitable fixings for those ................5
Restrictions of use Information about restrictions of use for different anchors ..........6
Materials and coatings Information about rawmaterials and coatings .............................7
Environmental management Environmental aspects and impacts of Sormat products .............8
Official approvals Official approvals granted by different authorities ....................9
CHEMICAL ANCHORS
Chemical capsules KEM ........................................................................................26
Studs for chemical capsules KEVA, VSS, VKS, VH ............................................................27
Hammercapsules and studs KEMLA, VSS, VKS, VH .........................................................28
Injection resins and accessories ITH PROGRAM ......................................................................29
DRYWALL ANCHORS
Driva and metallic drywall anchor DRIVA, DRIVA M, MOLA ........................................................34
Cavity anchor and Universal plug OLA, YLT ...................................................................................35
DRILLBITS
SDS + shank SDS PLUS ................................................................................36
SDS Max shank SDS MAX .................................................................................37
Masonry drills IP, EIP, Special drills, SDS+ accessories ..........................38
SDS Max accessories SDS Max accessories ...........................................................39
FIXING ACCESSORIES
Threaded bars, Installation bars KTS, KTH, RIP-L, RIP-U .........................................................41
CONCRETE INSERTS VASB, VASBS, VASBR, VASD, VASDS, VASDR, ST, ME ......42
2
SORMAT INDEX
PRODUCTS
FIXING SYSTEMS
Facade reparation anchors RU, PU .......................................................................................43
Isolation plastering bracket ERK ...........................................................................................44
Accessories LPT, RVK, RVKM, UNIVERSAL SCREW ................................45
PLUMBING ACCESSORIES
Pipe supports KOPI, KUPI ...........................................................................46
Pipe supports PPC, PPL, JR, JRL ....................................................................47
CABLE TIES
Cable ties, Cable tie plug, Banding wire JS, JSS, JSM, JSSM, JST, SLA ...........................................49
CABLE FIXINGS
Nailclips SC, NT ...................................................................................50
Cable clamps, installation bar KK, KKA, KKKS .......................................................................51
Cable clamps KP, KPA, KL .............................................................................52
Cable clamps, support pieces KR, VVA, VKA ...........................................................................53
Row clamps, installation profile RK, RKK, ALKI ...........................................................................54
NOTES .....................................................................................................58
3
FIXING GUIDE PRODUCT RANGE
MTA
max max
PFG
M8 M8
max
HDP, HDS
M8
max
MSA
M8
PKN
Confix
KRH
LYT
KBT
KBTM
max
KEM, KEMLA
M8
DRIVA
OLA
MOLA
YLT
4
QUALITY AND
TECHNICAL DATA BASE MATERIALS
SORMAT
ENVIRONMENT
CONCRETE
The most common building material. Concrete is mainly used in industrial building because of its high strength.
In housebuilding typical concrete structures are foundations, supporting structures, midsoles and stair elements.
All expanding anchors as well as chemical anchors are suitable for use in concrete.
Restrictions of use are spacings and edge distances.
SOLID BRICK
A very common building material. Brick is used mainly in small house building.
In industrial building brick is mainly used as material of separating structures.
All expanding anchors as well as chemical anchors are suitable for use in brick.
Restrictions of use are spacings, edge distances and sizes of fixings (max. M 8 is recommended).
HOLLOW BRICK
A very common building material. Hollow brick is mainly used as material for separating structures, and
in constructions where some kind of thermal isolation is required.
Suitable anchors for hollow brick are Nylon plugs made with a long expanding zone as well as injection
resins used with a sleeve. Restrictions of use are the same as in solid brick.
NATURAL STONE
Main use in buidings is in covering surfaces like facades and floors.
All expanding and chemical anchors are suitable for use in natural stone.
Restrictions of use are spacings and edge distances. Because of brittleness, stone cracks easily.
AERATED CONCRETE
A rather common building material in all building because of its weight and flexibility in use.
Aerated concrete is used mostly in separating structures, but also in supporting structures. Suitable anchors
for aerated concrete are Nylon plugs with long expansion zone and those, specially designed for this material,
like KBT. Chemical fixings can be used with restricions ( special shape of the hole).
LIGHT GROVEL
A common building material in small house building. It is mainly used in foundations and supporting
structures. Suitable anchors for this material are Nylon plugs with long expanding zone. Chemical anchors
can be used with restrictions (special shape of the hole).
PLASTERBOARD
A very common building material in all building. Main use of this material is in surface structures.
Suitable fixings are hollow wall and cavity anchors.
General symbols
5
SETTING DEPTHS
QUALITY AND TECHNICAL DATA
SORMAT
DISTANCES
ENVIRONMENT
F Force in general
N Tension force
V Shear force
h min Min. thickness of concrete member
h nom Min. embedment depth
s cr Min. spacing of two anchors
c cr Min. edge distance
N V
Anchor type
h min S cr C cr C 1+ C2 C cr C 1+ C2
Through bolt 1,5x h nom 20x 10x 15x 10x 30x
Drop in anchor 1,5xh nom 4xh nom 2xh nom 6xh nom 3xh nom 9xh nom
PFG anchor 1xh nom 4xh nom 2xh nom 6xh nom 3xh nom 9xh nom
Multifunction anchor 1xh nom 4xh nom 2xh nom 6xh nom 3xh nom 9xh nom
Heavy duty anchor h nom+10 4xh nom 2xh nom 6xh nom 3xh nom 9xh nom
Brass anchor 1xh nom 4xh nom 2xh nom 6xh nom 3xh nom 9xh nom
Screw anchor 1,5xh nom 15x 6x 15x 10x 30x
Chemical anchors 1,5xh nom 2,5xh nom 1,25Xh nom 2,5xh nom 1,5xh nom 3xh nom
Facade plug h nom+20 10x 50 100 75 150
Nailplug h nom+10 1xh nom 1xh nom 2xh nom 1xh nom 2xh nom
Nylon plug h nom+10 1xh nom 1xh nom 2xh nom 1xh nom 2xh nom
Express nail h nom+10 10x 50 100 75 150
Concrete nail h nom+10 10x 50 100 75 150
Concrete inserts 1,5xh nom 4xh nom 2xh nom 4xh nom 2xh nom 4xh nom
6
TECHNICAL DATA MATERIALS AND
COATINGS
Metals
Coldforming steel DIN 1654 440-660 Through bolts M8 - M16 L max. 150 mm
Freecutting steel DIN 1651 390-650 Through bolts M6, M20 and M8-M16 L>150 mm
Freecutting steel DIN 1651 390-650 Drop-in anchors, Concrete inserts
Stainless steel EN 10088 500-850 Stainless steel through bolts M8 - M16 L max. 150 mm
Stainless steel EN 17440 550-850 Stainless steel through bolts M6, M20 and M8-M16 L>150 mm
Cold rolled steelband EN 10016 420-500 PFG shields
Brass DIN 17660 380-450 Brass ancors
Construction steel EN 10025 340-500 Threaded bars and studs
Cold rolled steelband EN 10142 400-450 Steel bandings
Stainless steelband EN 10088 600-700 Stainless steel bandings
Plastics
Coatings
7
LIFESPAN
QUALITY AND ENVIRONMENT
SORMAT
IMPACTS
ENVIRONMENT
In use
Rawmaterials
Environmental impacts
Type
Production
Metal products Coldforming Use of electric energy, expired oils and waste are recycled
Metal products Turning Use of electric energy, waste and expired coolant fluid is recycled
Metal products Pressing Use of electric energy, waste is recycled
Plastic products Injection moulding Use of electric energy, waste is recycled
Chemical products Packaging Rawmaterial packings are recycled, waste is collected as problem-waste
Products generally Packaging Use of electric energy, use of recycklable packaging material.
In use
Products in use
Environmental impacts
Type
Metals None
Plastics None
Chemicals None
8
TECHNICAL DATA OFFICIAL
APPROVALS
International National
Product BY 5B SITAC ITB Others
S - KA ETA-01/0004 Option 4 No. 143 3711/81 AT-15-4496/2000 NT Fire 005 ISO 834
S - KAD ETA-00/0006 Option 6 No. 143 3711/81 AT-15-4496/2000 NT Fire 005 ISO 834
S - KAK No. 143 3711/81 AT-15-4496/2000 NT Fire 005 ISO 834
S - KAKD No. 143 3711/81 AT-15-4496/2000 NT Fire 005 ISO 834
S - KAH ETA-01/0003 Option 4 No. 143 3711/81
PU M6 No. 151
RU M8 No. 151
VA No. 152
Confix 2629/93
9
QUALITY AND
THROUGH BOLT METAL ANCHORS
SORMAT
ENVIRONMENT
Approved by
S-KA steel, zinc plated
S-KAK steel, hot dip galvanized
S-KAH stainless steel (grade 316)
Through bolt is designed for medium heavy and heavy fixings in hard embedments like concrete, solid brick (max. M 8) and natural stone.
A ready to install anchor specially suitable for through fixings. A wide selection of sizes and corrosion protections.
More technical information on technical pages 7 and 9.
10
METAL ANCHORS THROUGH BOLT
Installation parameters
mm mm mm mm mm
640 40 18 6 35 2
6/15 65 28 6 50 15
6/50 100 28 6 50 50
850 50 25 8 45 2
8/10 75 32 8 65 10
8/30 95 41 8 65 30
8/55 120 66 8 65 55
8/85 150 92 8 65 85
1060 60 28 10 50 3
10/10 80 34 10 70 10
10/25 95 37 10 70 25
10/30 100 54 10 70 30
10/55 125 67 10 70 55
10/80 150 92 10 70 80
12/5 85 35 12 80 5
12/20 100 50 12 80 20
12/35 115 52 12 80 35
12/65 145 82 12 80 65
12/105 185 46 12 80 105
12/155 235 46 12 80 155
1690 90 45 16 80 3
16/5 110 53 16 105 5
16/20 125 65 16 105 20
16/45 150 76 16 105 45
16/70 175 55 16 105 70
16/95 200 55 16 105 95
20/20 170 55 20 130 20
20/70 220 55 20 130 70
20/130 280 55 20 130 130
Capacities
6 x 40 * 30 7 1,4
M 6* 40 7 1,8
8 x 50 * 40 18 1,6
M 8 55 18 2,4 2,0
10 x 60 * 40 30 2,1
M 10 60 30 3,6 3,0
M 12 70 54 6,4 4,8** 4,8 3,6**
16 x 90 * 70 100 7,5
M 16 95 120 10,0 6,4
M 20 * 120 240 13,9
Restrictions of use (spacings and edge distances) on page 6. * Do not belong to ETA
Materials and coatings on page 7. Official approvals on page 9. ** D versions with 2 cones
11
DROP IN ANCHOR METAL ANCHORS
LA zinc plated
LAH stainless steel grade 316 (A4)
It must be observed that the anchor can not be expanded with the screw !
LA, LAH
d0 = drillhole diameter
70006 LA 6 100 / 1000 / 76000 6,8
f = thread length
70008 LA 8 100 / 1000 / 48000 12,2 l = anchor length
70010 LA 10 50 / 500 / 24000 22,8 h1 = embedment depth
70012 LA 12 50 / 500 / 21000 46,3
70016 LA 16 25 / 250 / 10500 96,8
70020 LA 20 20 / 100 / 4200 192,0
12
METAL ANCHORS MTA
MSA
Multifunction anchor MTA is designed for medium heavy and heavy loads.
MTA can be installed in hard materials like concrete, brick and natural stone.
The anchor has both male- and female thread.
Using the nut and the washer MTA can be installed also in thin or hollow
constructions. In such situation the anchor acts like an undercut anchor !
MTA 8/12 M 8/12 50 12 25 10/22 2,0 / 2,6 3.0 / 2,6 LT MTA 8/12
MTA 10/16 M 10/16 60 16 25 12/30 4,2 / 4,6 6,0 / 4,6 LT MTA 10/16
Restrictions of use (emb.depth, spacings and edge distances) on page 6. * includes safety factor 5
Materials and coatings on page 7, official approvals on page 9. ** 8/12=35 mm, 10/16=45 mm
16 5 16 l = Anchor length
MSA 4 M 4 16 + t fix 0,6
20 d0 = Anchor od / drill dia.
MSA 5 M 5 20 6 20 + t fix 0,7
h1 min = Min. embedm.depth
MSA 6 M 6 24 8 24 24 + t fix 1,0 t fix = Fixture thickness
MSA 8 M 8 30 10 30 30 + t fix 1,5
MSA 10 M 10 34 12 34 34 + t fix 2,1
MSA 12 M 12 40 16 40 40 + t fix 3,2
MSA 16 M 16 44 20 44 44 + t fix 4,1
13
PFG ANCHORS METAL ANCHORS
SB, SBS
SB SBS
5-10 77101* 77150* 50 / 500 14,7
5-20 77125* 77151* 50 / 500 15,8
5-40 77102* 77152* 50 / 500 18,3
6- 8 77103* 77153* 50 / 500 22,2
6-13 77104 77154 50 / 500 24,8
6-28 77105 77155 50 / 500 27,5
6-53 77106 77156 50 / 250 32,0
8- 7 77107 77157 50 / 250 49,9
8-17 77126 77159 50 / 250 62,7
8-27 77108 77158 50 / 250 56,7
8-42 77109 77160 50 / 250 69,9
8-62 77127 77161 50 / 250 77,1
8-82 77110 77162 25 / 125 82,7
8-102 77128* 77163* 25 / 125 89,0
10-10 77111 77164 50 / 250 84,7
10-10x60 77130* 77166* 25 / 125 96,2
10-20 77129 77165 50 / 250 89,1
10-30 77112 77168 25 / 125 106,1
10-40 77113 77167 25 / 125 98,6
10-50 77114 77169 25 / 125 117,1
10-70 77115 77170 25 / 125 126,3
10-90 77131 77171 25 / 125 136,2
12- 8 77132* 77172* 25 / 125 147,0
12-18 77116* 77173* 25 / 125 154,3
12-18x80 77133 77175 10 / 100 190,6
12-28 77117 77177 10 / 100 200,3
12-28x100 77136* 77179* 10 / 50 239,3
12-38 77118 77174 10 / 100 171,0
12-48 77134* 77176* 10 / 100 179,4
12-48x 80 77135 77178 10 / 50 212,6
12-48x100 77138* 77181* 10 / 50 254,2
12-65 77119 77180** 10 / 50 230,8
16-15 77120 77182* 10 / 50 325,5
16-25 77121 77184* 10 / 50 399,1
16-45 77122 77183* 10 / 50 366,1
14
METAL ANCHORS PFG ANCHORS
SB, SBS
Restrictions of use (spacings and edge distances) on page 6. * Includes safety factor >3
Materials and coatings on page 7. Official approvals on page 9.
15
PFG ANCHORS METAL ANCHORS
LB, LBS, LBC
Approved by
LB Loose bolt, shield zinc plated
LBS Loose bolt, shield sherardized
LBC Loose bolt, shield cast iron, unplated
LB LBS LBC*
16
METAL ANCHORS PFG ANCHORS
LB, LBS, LBC
Approved by
17
PFG ANCHORS METAL ANCHORS
ES, ESS, ESSH, ESC
Approved by
ES Anchorshield, zinc plated
ESS Anchorshield, stainless steel AISI 316 (A4)
ESSH Anchorshield, sherardized
ESC Anchorshield, cast iron, unplated
* Outgoing products
18
METAL ANCHORS PFG ANCHORS
EB. / HB.
EB Zinc plated anchor with eyebolt HB Zinc plated anchor with hookbolt
EBS Sherardized anchor with eyebolt HBS Sherardized anchor with hookbolt
EBF Zinc plated anchor with forged eyebolt HBF Zinc plated anchor with forged hookbolt
EBFS Sherardized anchor with forged eyebolt HBFS Sherardized anchor with forged hookbolt
HBT Zinc plated anchor with stud HBH Zinc plated anchor with hook
HBTS Sherardized anchor with stud HBHS Sherardized anchor with hook
HB * 77301 77302 77303 77304 77305 77306 50/500 25/250 25/125 10/50 10/50 5/25
HBS * 77310 77311 77312 77313 77314 77315 50/500 25/250 25/125 10/50 10/50 5/25
HBF - 77330 77331 77332 77333 77334 - 25/250 25/125 10/50 10/50 5/25
HBFS * - 77320 77321 77322 77323 77324 - 25/250 25/125 10/50 10/50 5/25
19
PFG ANCHORS METAL ANCHORS
EB AND HB
EB HB
Installation parameters and capacities
EB.. M 5 35 8 40 4 - 8 - 1,1
EB.. M 6 40 10 45 6 10,0 10 2,8 1,5
EB.. M 8 50 14 55 14 11,8 15 5,0 3,6
EB.. M 10 60 16 65 27 14,5 18 6,7 6,3
EB.. M 12 80 20 90 46 17,0 22 8,9 7,6
EB.. M 16 100 25 110 100 - 29 13,4 10,0
Restrictions of use (spacings and edge distances) on page 6. * Loads are determined by the
Materials and coatings on page 7. Official approvals on page 9. strength of the hook- / eyebolt.
20
METAL ANCHORS HEAVY DUTY
HDP, HDS
HDP HDS
Heavy duty anchor is available in two versions, HDP with hexagonal bolt and HDS with stud, nut and washer. These anchors are suitable for
meadium heavy and heavy fixings in solid and hard materials like concrete, also cracked concrete, brick (max. M 8) and natural stone.
Due to its powerful and controlled expansion it is suitable for heavy loads. The deforming ring guarantees that after tightening the anchor,
the fixture is completely and strongly attached to the base.
Range anden
Assortiment packages
verpakking
77701 HDP 10/0 50 / 250 38,0 77730 HDS 10/0 50 / 250 38,0
77702 HDP 10/10 50 / 250 43,2 77731 HDS 10/10 50 / 250 43,2
77703 HDP 10/25 50 / 250 51,1 77732 HDS 10/25 50 / 250 51,1
77704 HDP 12/0 50 / 250 70,0 77733 HDS 12/0 50 / 250 70,0
77705 HDP 12/10 50 / 250 78,6 77734 HDS 12/10 50 / 250 78,6
77706 HDP 12/25 25 / 125 91,4 77735 HDS 12/25 25 / 125 91,4
77707 HDP 12/50 25 / 125 111,4 77736 HDS 12/50 25 / 125 111,4
77708 HDP 15/0 25 / 125 135,7 77737 HDS 15/0 25 / 125 135,7
77709 HDP 15/10 25 / 125 147,6 77738 HDS 15/10 25 / 125 147,6
77710 HDP 15/25 25 / 125 167,7 77739 HDS 15/25 25 / 125 167,7
77711 HDP 15/50 25 / 125 200,3 77740 HDS 15/50 25 / 125 200,3
77712 HDP 18/0 10 / 50 218,2 77741 HDS 18/0 10 / 50 218,2
77713 HDP 18/10 10 / 50 235,2 77742 HDS 18/10 10 / 50 235,2
77714 HDP 18/25 10 / 50 268,7 77743 HDS 18/25 10 / 50 268,7
77715 HDP 18/50 10 / 50 311,2 77744 HDS 18/50 10 / 50 311,2
77716 HDP 24/10 5 / 25 572,3 77745 HDS 24/10 5 / 25 572,3
77717 HDP 24/25 5 / 25 616,3 77746 HDS 24/25 5 / 25 616,3
77718 HDP 24/50 5 / 25 696,3 77747 HDS 24/50 5 / 25 696,3
77719 HDP 28/10 5 / 25 835,7 77748 HDS 28/10 5 / 25 835,7
77720 HDP 28/25 5 / 25 922,0 77749 HDS 28/25 5 / 25 922,0
77721 HDP 28/50 5 / 25 1035,7 77750 HDS 28/50 5 / 25 1035,7
21
HDP, HDS METAL ANCHORS
HEAVY DUTY
HDP HDS
Restrictions of use (spacings and edge distances) on page 6. * Testreport ER 553 01 0524
Materials and coatings on page 7. Official approvals on page 9.
22
METAL ANCHORS SCREW ANCHORS
RA, RAH
RA RAR, RAH
Screw anchors are developed from through bolts by equipping them with a female thread.
Screw anchors are designed for inattentive installations due to their countersunk screw.
These anchors can be installed in hard and solid embedments like concrete, solid brick and
natural stone. Stainless steel anchors, RAR and RAH are delivered without screw.
Screw anchors are often used in fixing doorsteps, window frames and structures
for balcony glazing.
l Anchor length
d0 Drillhole diameter
hnom Min. Embedment depth
tfix Fixture thickness
Concrete > C 20
mm mm mm mm
RA 6 x 50 M5 40 6 30 30 0,5 / 0,75
RA 6 x 75 M5 65 6 30 55 0,5 / 0,75
RA 6 x 90 M5 80 6 30 70 0,5 / 0,75
Restrictions of use (spacings and edge distances) on page 6. * With min. embedm. depth and standard screw
Materials and coatings on page 7. Official approvals on page 9. ** Includes a safety factor >3
23
CONFIX METAL ANCHORS
PKN
CONFIX PKN
Concrete nails Confix and Express nail PKN are designed for light fixings in hard materials like concrete
and brick. These anchors are quick and easy to install. Drill a hole through the fixture and hit the nail with
a hammer into the hole. Because of a fully metallic construction these fixings are suitable in situations,
where fire resistance is required. The stainless steel Confix is suitable also for outdoor use and for use in
moderately heavy corrosion athmosphere.
l total length
d0 drill hole diameter
h1 drilling depth
hnom min. setting depth
tfix fixture thickness
Range, packages, installation parameters and capacities
Confix mm mm mm mm mm kN
* SITAC 2629/93
PKN mm mm mm mm mm kN
Restrictions of use (spacings and edge distances) on page 6. * Including safety factor >4
Materials and coatings on page 7. Official approvals on page 9.
24
METAL ANCHORS FRAME ANCHORS
KRH, SKRH
mm mm mm mm
25
KEM CHEMICAL
ANCHORS
Insert the capsule in the hole. Ensure that the Curing time
liquid inside the capsule is moving when the
capsule is handwarm. +20 20 min.
+10 30 min.
Install the stud into the hole by using a drilling
0 60 min.
machine with impact. Use the setting tool (page 48).
-5 5 hours
O
C
Observe the curing- and gel time needed
before putting load on the anchor.
Attention !
Mount the fixture and tighten the nut to Installation in a wet
right torque shown in the table above. hole will double
the curing time.
26
CHEMICAL STUDS
ANCHORS
The studs for KEM are available in different steel qualities and coatings.
KEVA, steel 5.8, zinc plated, equipped with hexagonal grip for setting tool.
KEVA VSS, steel 5.8, zinc plated, flat end.
VKS, steel 5.8, hot dip galvanized, flat end.
VH, stainless steel grade AISI 316 (A4), flat end.
Special materials and dimensions on request.
VSS, VKS, VH
Safety factors
27
KEMLA CHEMICAL
VSS, VKS, VH ANCHORS
KEMLA, the hammer capsule is a chemical anchor for threaded The studs for KEMLA are available in three different protections
studs and rebars (reinforcment bars). KEMLA is easy to install, against corrosion. KEVA / VSS, steel zinc plated, VKS, steel,
no special tools are needed, just drill a hole, insert the capsule and hot dip galvanized and VH, stainless steel. The dimensioning of
hammer the stud in. As other chemical anchors, fastening the studs is designed for standard one capsule installations.
the KEMLA creates no strain in the embedment, so installations
close to edge are allowed. KEMLA bears slightly also dynamic
loads.
Size Stud d0 s d0 R h1 = hnom ccr t fix max T inst max Permissible loads in kN
for stud for rebar standard stud Concrete >C25
mm mm mm mm mm Nm Stud Rebar
d0 = drillhole diameter
Drill a hole acc. to information in the table
h1 = drillhole depth
above. Diamond drilled holes must be coarsed.
hnom = setting depth
tfix = fixture thickness
Clean the hole properly from drilling dust with Tinst = setting torque
a brush or airblow. It is not recommended ccr = edge distance min.
to clean the hole with water.
Base material
Insert the capsule in the hole. Ensure that the temperature
liquid inside the capsule is moving when the
capsule is handwarm. Curing time
+20 1 hour
28
CHEMICAL INJECTION RESIN
ANCHORS ITH RANGE
ITH 345 Styrene free vinylester resin, 345 ml cartridge IOV, a perforated sleeve made of
ITH 150 Styrene free polyester resin, 150 ml cartridge plastic material.
IOV
29
NYLON PLUGS LIGHT FIXINGS
NAT, NAT L
75005 NAT 5 100 / 5000 / 300000 0,3 25 5 2,5 - 4,0 0,6 / 0,5
75006 NAT 6 100 / 3000 / 180000 0,6 30 6 3,5 - 5,0 0,9 / 0,8
75008 NAT 8 100 / 2000 / 112000 1,4 40 8 4,5 - 6,0 1,4 / 1,2
75010 NAT 10 50 / 1000 / 56000 2,6 50 10 6,0 - 8,0 2,4 / 1,7
75012 NAT 12 25 / 500 / 28000 4,4 60 12 8,0 - 10,0 3,3 / 2,1
A plug made of polyamide for light fixings. Due to the long expanding
zone NAT L is suitable for use also in porous materials like aerated
concrete, light grovel and hollow brick.
Temperature range in use -40 ... +80 oC.
Drill diameter = do, min drilling depth = l + 5 mm.
NAT L Suitable screw length = 0,8 - 1 x pluglength (l) + fixture thickness.
75009 NAT 8 L 50 / 1000 / 56000 2,0 65 8 4,5 - 6,0 3,6 / 4,0 / 2,7
75011 NAT 10 L 25 / 500 / 28000 4,0 80 10 6,0 - 8,0 5,0 / 7,2 / 3,7
Restrictions of use (spacings and edge distances) on page 6. * Capacities are achieved with using max. screw size,
Materials and coatings on page 7. a safety factor of >3 is included.
5/35 75640 75641 75644 75645 75648 200 / 2000 3,0 5,0 30 5
5/45 75642 75643 75646 75647 75649 200 / 2000 3,6 5,0 30 15
30
LIGHT FIXINGS NAILPLUG
LYT
A nail plug LYT is a pre assembled, ready to install anchor for light fixings in hard bases like concrete, brick and natural stone.
LYT is a real Speedplug in through fixings. Just drill a hole through the fixture, hammer the plug in, and the fixing is ready.
The plug part of the anchor is made of Polyamide, which gives the anchor a good and a durable grip in the base material.
The hardened steel nail is coated with zinc plating. The head of the nail has a Pozidive slot for dismounting of the anchor.
LYT UK KP LYT LK SP
LYT UK KP LK SP LK RST
31
KAT, KAT N FACADE PLUGS
KAT 10 x 100 N 75807 75879 75888 75836 75845 50 / 500 / 12000 30,1
KAT 10 x 115 N 75808 75880 75889 75837 75846 50 / 500 / 12000 34,3
KAT 10 x 135 N 75809 75881 75890 75838 75847 50 / 500 / 12000 43,1
KAT 10 x 160 N 75810 75882 75891 75839 75848 50 / 500 / 12000 50,8
KAT 10 x 80 80 10 60 50 30 2,0 - -
KAT 10 x 100 100 10 60 50 50 2,0 - -
KAT 10 x 115 115 10 60 50 65 2,0 - -
KAT 10 x 135 135 10 60 50 85 2,0 - -
KAT 10 x 160 160 10 60 50 110 2,0 - -
32
NYLON ANCHORS KBT, KBTM
KBT
75104 KBT 4 25 / 500 / 28000 3.5 50 10 60 4,0 - 4,5 M4 0,2 / 0,3 / 0,4
75106 KBT 6 25 / 500 / 28000 3.6 50 10 60 5,0 - 6,0 M6 0,2 / 0,3 / 0,4
75108 KBT 8 25 / 300 / 8400 5.9 60 12 70 7,0 - 8,0 M8 0,4 / 0,6 / 0,7
75110 KBT 10 25 / 300 / 8400 8.4 70 14 80 9,0 - 10,0 M 10 0,6 / 0,9 / 1,0
* Capacities are achieved with using max. screw size. A safety factor of >3 is included. ** Suitable length 0,8 - 1,0 x l + t fix
Drill a hole acc. to instructions in Insert the anchor by using a Attach the fixture with a suitable screw.
the tables above. setting tool (see page 48). See screw dimensions in the tables
above.
33
DRIVA, DRIVA M DRYWALL
MOLA ANCHORS
Driva is designed for light fixings in plasterboard. Mounting a Driva does not require any special tools, just a cross headed screw-
driver is enough.
A metallic alternative, Driva M, is can be used also in extra hard plasterboards, chipboards and in fire proof installations.
Driva anchors are supplied with screws.
MOLA
MOLA
Drill a hole and insert
the anchor into the hole.
Range and packages
34
DRYWALL OLA
ANCHORS YLT
Drill a hole
10 mm.
l = plug length
d0 = drillhole diameter
Drill a hole acc. to Insert YLT into the hole. Attach the fixture with
theOLA
table below. a suitable screw.
mm mm mm
75210 YLT 6 150 / 3000 / 168000 0,5 30 6 3,0 - 4,5 0,25 / 0,2 / 0,25 / 0,2
75211 YLT 8 100 / 2000 / 48000 1,6 50 8 3,5 - 6,0 0,8 / 0,8 / 0,3 / 0,25
75212 YLT 10 50 / 1000 / 24000 3,0 60 10 6,0 - 8,0 0,5 / 0,6 / 0,8 / 0,25
35
SDS+ DRILLS DRILL BITS
SDS+ range
Code SDS + Drilling Minimum Weight Code SDS + Drilling Minimum Weight
depth delivery kg/1000 pcs depth delivery kg/1000 pcs
mm pcs mm pcs
36
DRILL BITS SDS+ DRILLS
SDS MAX DRILLS
SDS+ range
Code SDS + Drilling Minimum Weight Code SDS + Drilling Minimum Weight
depth delivery kg/1000 pcs depth delivery kg/1000 pcs
mm pcs mm pcs
51641 19x200 150 1 205 51648 24x250 200 1 410
51649 24x450 400 1 710
51642 20x200 150 1 255
51643 20x300 250 1 365 51650 25x250 200 1 410
51644 20x450 400 1 520 51651 25x450 400 1 710
51645 20x600 550 1 690 51685 25x600 550 1 948
51681 20x800 750 1 920
51677 26x250 200 1 410
51646 22x250 200 1 320 51678 26x450 400 1 710
51647 22x450 400 1 630
51665 22x600 550 1 840
51670 22x800 750 1 1120
Code SDS Max Drilling Minimum Weight Code SDS Max Drilling Minimum Weight
depth delivery kg/1000 pcs depth delivery kg/1000 pcs
mm pcs mm pcs
37
IP, EIPAND
QUALITY DRILL BITS
SORMAT
SDS+ TOOLS
ENVIRONMENT
38
6
ROTARY
QUALITYHAMMER
AND SDS MAX
SORMAT
ACCESSORIES
ENVIRONMENT TOOLS
SDS Max tools are designed for use in big rotary hammers in professional use.
The tools are manufactured from high quality tempering steel. This guarantees
a long durability against wearing. Chiseling goes smoothly, without compressed air.
A large range of core bits make also big holes possible without extra machines.
ADAPTER
Range
39
KVA, KVAH,AND
QUALITY PVA BANDING
PVAH, PVAM, LVA SORMAT
ENVIRONMENT
KVA LVA
PVA
56012 KVA 12x0,75 30 / 300 / 14400 49,1 6,2 3,2 12,0 1,5
56011 KVA 12x0,75 10 / 200 / 9600 49,1 6,2 3,2 12,0 1,5
56017 KVA 19x0,75 30 / 180 / 8100 78,5 8,3 3,3 18,0 2,6
56020 KVA 19x0,75 10 / 150 / 7200 78,5 8,3 3,3 18,0 2,6
56019 KVA 19x1,00 30 / 180 / 6490 101,0 8,3 3,3 18,0 3,4
56018 KVA 19x1,00 10 / 150 / 7200 101,0 8,3 3,3 18,0 3,4
56025 KVA 25x1,00 30 / 150 / 5400 163,0 8,3 3,3 25,5 6,1
56024 KVA 25x1,00 10 / 100 / 3600 163,0 8,3 3,3 25,5 6,1
56101 KVAH 19x1,00 10 / 150 / 7200 112,1 8,3 3,3 18,0 5,8
56102 KVAH 25x1,00 10 / 100 / 3600 164,5 8,3 3,3 25,5 10,2
*
40
6 Values are actual break loads. A safety factor
of 3 ... 6 is recommended.
INSTALLATION
QUALITY AND KTS, KTH
SORMAT
ACCESSORIES
ENVIRONMENT RIP L, RIP U
m kN
RIP L RIP U
Sormat installation bars are manufactured of cold rolled hot dip galvanized steel.
Installation bars are most often used as base structures in different types of
pipe and channel supporting systems. Due to all round perforation, installation
bars are suitable structures for both threaded bar and banding applications.
mm mm m
41
QUALITY AND
VASB, VASD CONCRETE
SORMAT
ENVIRONMENT INSERTS
An insert to placed in concrete before it is hardened. VASB with bobstay, without mounting plate
After concrete hardening the insert can be loaded VASD with bobstay and mounting plate
from its female thread. Sormat concrete inserts are
type approved as load transferring steel elements
in concrete structures. Manufacturing of the inserts
is controlled by official authorities.
ME
79260 ST 10 1000 0,2 79201 ME 10 100 0,7
79261 ST 12 500 0,7 79202 ME 12 100 0,8
79262 ST 16 500 1,0 79203 ME 16 100 1,0
79263 ST 20 500 1,7 79204 ME 20 100 1,2
79264 ST 24 500 2,4 79205 ME 24 50 1,5 ST
42
FIXINGAND
QUALITY FACADE- AND
SORMAT
SYSTEMS
ENVIRONMENT STRAIN ANCHORS
Sormat facade anchor RU is designed for repair fixing different kind of cortical structures
like sandwich elements. The fixing is done through the shell and the isolation layers into the
bearing structure. RU anchor is made of stainless steel.
Drill a 14 mm hole in a
specified angle or perpen-
dicular. The depth of the
hole is depending on the
structure and desired
capacity.
RU
Sormat Strain anchor PU is used together with the facade anchor RU in situations where the
supporting steel structures of a sandwich element can no more withstand the pressure forces
caused by the facade anchor. The strain anchor works in two phases. The inner anchoring
element is anchored into the bearing structure like a torque controlled anchor. The outer
anchoring element is tightened into the shell layer with a setting tool (page 48).
PU
43
PLASTERING
QUALITY AND FIXING
SORMAT
BRACKET ERK
ENVIRONMENT SYSTEMS
Sormat ERK is a fixing device for plastered structures with isolation material between the base structure and
the surface plastering layer. ERKs articulated construction allowes movements of the surface layer
caused by wind pressure and suction. Sormat ERK is a ready to install device consisting of the bracket to be
mounted in the structure, pendulum arm according to isolation thickness and three locking plates, one to lock
the isolation material and two to lock the plastering net. The ERK bracket shall be mounted with an anchor that
is suitable to be fixed in the base material.
ERK
LRH M8
Range and packages
2
mm pcs/m
44
FIXINGAND
QUALITY RVK, RVKM,
SORMATLPT
SYSTEMS
ENVIRONMENT
Distance bracket RVK is developed to fix 19x19 mm plastering net on the structure so,
that there will remain a desired space between the base structure and the net. This
will allow the plaster layer to settle on both sides of the net. The bracket shall be fixed
in the base material with suitable anchor with high corrosion resistance. Average
consumption is 4 - 7 pcs / sqm, depending on the quality of the base material and the
thickness of the plastering layer.
RVK RVKM
Range and packages
mm mm
LPT
pcs mm mm
An example of using LPT when mounting an ERK in a plastered aerated concrete base.
Drill a hole using a Install a plug for aerated Attach the ERK in the shorter
sleeve drill through the concrete and screw in the LPT thread of the LPT using a nut.
plaster into the base so, that the hexagonal flange The flange of the LPT takes
is at the level of the plaster the force of tightening the nut
surface without affecting the plug in the
base material
45
KOPI, KUPI
QUALITY AND PIPE
SORMAT
KUPI / 2
ENVIRONMENT SUPPORTS
KUPI plastic
KUPI / 2 plastic, with a lock
KOPI
mm
41201 KUPI 12 12 100 / 1000 2,5
41202 KUPI 15 15 and Pk 9 100 / 1200 2,9
41203 KUPI 18 18 and Pk 11 100 / 1200 3,5
KUPI 41204 KUPI 20 20 and Pk 13,5 100 / 1200 4,2
41205 KUPI 22 22 and Pk 16 100 / 1200 4,9
41206 KUPI 25 25 100 / 800 5,3
41207 KUPI 28 28 and Pk 21 100 / 800 5,7
41208 KUPI 31 31 50 / 600 7,5
41209 KUPI 36,5 36,5 and Pk 29 50 / 600 9,6
46
PIPE AND
QUALITY PPC
SORMAT
SUPPORTS
ENVIRONMENT PPL
PPC PPL
Range and packages
mm inch pcs
47
SETTINGAND
QUALITY SORMAT
SORMAT
TOOLS
ENVIRONMENT PRODUCTS
LA SETTING TOOL
T40 BIT
48
CABLEAND CABLE TIES
QUALITY SORMAT
FIXINGS JS, JSS, JSM
ENVIRONMENT JST, SLA
JS Transparent
JSS Black, weather resistant
JS JSM With marking plate
JST Socket plug
JSS
JSM JST
Cable tie JS is designed to be used in making bundles, as well as bandagin all kind of bunches.
The function of JS is based on serrated tie and a locking mechanism which allow the
tie to tighten almost stepless around the bundle. As rawmaterial is used Polyamide 66 (Nylon)
which is strong, tough and has excellent temperature- and chemical resistance.
JST is a plug to be installed in concrete and other hard base materials. An installed JST in use
plug has a function of a socket for cable ties. Drill a hole 8mm, depth 36 mm and
hammer gently the plug into the hole. Observe the desired direction
of the opening in the head of the plug.
Range and packages
mm mm kN m
16301 SLA 1,4 grey 1,0 1,4 0,24 100 / 1000 5,8
16302 SLA 1,8 black 1,5 1,8 0,53 50 / 500 14,3
SLA
49
NAIL CLIPS
QUALITY AND CABLE
SORMAT
SC, SCH, SCM
ENVIRONMENT FIXINGS
SC SCH SCM
3-5 11005 11305 11505 11105 3-5 1,2x20 100 / 3000 / - 0,31
4-6 11008 11308 11508 11108 4-6 1,2x20 100 / 3000 / - 0,29
5-7 11007 11307 11507 11107 5-7 1,2x20 100 / 3000 / - 0,37
7-10 11010 11310 11510 11110 7-10 2,0x25 100 / 2000 / - 0,83
7-10 L30 11011 7-10 2,0x30 100 / 2000 / - 0,93
8-12 11012 11312 11512 8-12 2,0x30 100 / 2000 / - 1,28
8-12 L45 11013 8-12 2,0x45 100 / 2000 / - 1,64
10-14 11014 11314 11514 11114 10-14 2,0x30 100 / 2000 / - 1,43
10-14 L45 11015 10-14 2,0x45 100 / 2000 / - 1,85
14-20 11020 11320 11520 11121 14-20 2,0x35 100 / 2000 / - 2,19
14-20 L45 11021 14-20 2,0x45 100 / 2000 / - 2,42
18-22 11022 11322 11522 18-22 2,5x45 50 / 1000 / - 3,18
20-26 11026 11326 11526 20-26 2,5x45 50 / 1000 / - 3,80
/ depth
mm mm
50
QUALITY
CABLE AND
CLAMPS KK, KKKS
SORMAT
ENVIRONMENT VVK
KK
mm mm
* kg/1000 m
51
QUALITY
KP AND
, KPA, KL CABLESORMAT
CLAMPS
ENVIRONMENT
The size digits indicate the max. fixture diameter. Size marking 26/2 indicates that the clamp is
suitable for fixing two 26 mm cables. On request we deliver clamps also for 3 cables.
mm mm mm KP
13212 KP 12 14 48 20 200 23,0
13214 KP 14 15 48 20 200 25,0
13218 KP 18 19 51 20 200 27,0
13222 KP 22 23 55 20 200 28,0
13226 KP 26 27 58 20 200 34,0
13230 KP 30 31 65 20 200 40,0
13234 KP 34 35 68 20 200 44,0
13240 KP 40 41 75 20 150 75,0
13246 KP 46 47 81 20 100 96,0
13252 KP 52 53 90 20 100 100,0
13260 KP 60 62 97 20 100 119,0
13289 KP 82 84 128 20 25 145,0
52
QUALITY
CABLE AND
CLAMPS KR, VVL, VKA
SORMAT
ENVIRONMENT
Cable clamp type KR is for clamping cables, tubes and other oblong elements.
KR is designed to be attached in structures made of angle iron.
All parts of the clamp are hot dip galvanized. KR range covers also clamps for
two and three cables. The size digits indicate the max. fixture diameter.
mm
Cable supports VVL is used between cable and installation profile to protect cable mantle.
When clamping several cables with one clamp, the VKA is used between two cables to
protect cable mantels and to give distance between cables and by that mean prevent
possible overheating.
The supports are made of weather resistant Polyamide (Nylon). VVL VKA
53
QUALITY
RK, AND
RKK, ALKI CABLE
SORMAT
ENVIRONMENT FIXINGS
mm
mm m
54
QUALITY
CABLEAND SET,SORMAT
SET H
GROMMETS
ENVIRONMENT SET V0
Sormat SET is an elastic grommet made of melt processible rubber. SET is used as a seal when a cable
or tube is penetrating into a switchboard or enclosure. SET is more dust- and waterproof than most of the
metallic grommets. Sormat SET is available in six dimensions covering cable / tubediameters from
5 to 32 mm.
Installation
55
TECHNICAL DATA SORMAT
STATIC LOAD
F
Constantly changing
+ Direction and size of
the force changes
0 t regularly
_
F
Pulsating
Direction or size or
+ both change irregularly
0 t
_
F
F = force in general Shock
Direction or size
N = tension foce +
changes randomly
V = shear force 0
_
t
N
Concrete failure is essentially affected by
two parameters; compression strength of
the concrete member and effective
anchorage depth of the anchor.
56
CONTACT
WE SERVE YOU
INFORMATION
WORLD MAP
GROUP
SALES AND
MARKETING
Christian sterberg
Managing director
T: +358 20 176 3804
M: +358 400 327 959
E: christian.osterberg@sormat.fi
Jarmo Kylliinen
Marketing manager
T: +358 20 176 3820 SORMAT-PFG B.V.
SORMAT OY M: +358 400 223 994
T: +358 201 76 3800 E: jarmo.kylliainen@sormat.fi T: +31 492 4690
E: info@sormat.fi E: info@pfg.nl
www.sormat.fi www.pfg.nl
PRODUCT
MANAGEMENT
Jari Leminen
Technical director
T: +358 20 176 3811
M: +358 400 775 933
E: jari.leminen@sormat.fi
TECHNICAL
SUPPORT SORMAT FRANCE SAS
SORMAT OST L.L.C.
T: +33 826 020 029
Toni Kontto E: contact@sormat.fr
T: +7 812 380 62 12
Product manager
E: droev@nwgsm.ru
T: +358 20 176 3821
M: +358 40 729 2611
E: toni.kontto@sormat.fi
57
NOTES SORMAT
58