[2] Equipment and Protective Systems intended for use in Potentially Explosive
Atmospheres, Directive 94/9/EC
[7] The design of the equipment mentioned under [4] and any acceptable variations thereto are
specified in the annex to this EC-Type Examination Certificate.
[8] IBExU Institut fr Sicherheitstechnik GmbH, Notified Body number 0637 in accordance with article
9 of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994, certifies
that the equipment mentioned under [4] has been found to comply with the Essential Health and
Safety Requirements relating to the design and construction of equipment intended for use in po
tentially explosive atmospheres given in Annex II to the Directive.
The test results are recorded in the test report IB-14-3-095 of 23 April 2015.
[9] Compliance with the Essential Health and Safety Requirements has been assured by compliance
with EN 60079-0:2012, EN 60079-1:2007, EN 60079-7:2007 and EN 60079-11:2012 as weil as EN
50495:2010 and in dependence to EN 14986:2007.
[10] lf the sign "X" is placed after the certificate number, it indicates that the equipment is subject to
special conditions for safe use specified under [17] in the annex to this EC-Type Examination Cer
tificate.
[11] This EC-Type Examination Certificate relates only to the design and construction of the specified
equipment. lf applicable, further requirements of this Directive apply to the manufacture and supply
of this equipment.
[12] The marking of the equipment mentioned under (4] shall include the following:
<@ II 2G Ex d e ib 118 T3 Gb
-55 oc resp. -40 oc s Ta S +60 oc
Annex
Page 1 of 2
IBExU14ATEX1123 X
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
[13] Annex
Technical data:
- Nominal valtage range: 380 Vup to 440 V
Motor stack length: 85 mm and 120 mm
Power input: max. 3.2 kW
Air flow: max. 40 000 m3/h
Back pressure: max. 400 Pa
Nominal frequency: 50/60 Hz
1
Nominal speed: max. 1700 min-
Mode of operation: 81
Ambient temperature range: -55 o c resp. -40 o c up to +60 o c
Heating device (optional): PTC 24 V
Property class Ex-d screws: 10.9
Degree of protection: Motor compartment IP 44 according to EN 60034-5
Terminal compartment IP 66 according to EN 60529
Electronics compartment IP 54 according to EN 60529
The ratings of the individual motor and impeller designs are specified in the Continuation Sheets to
this EC-Type Examination Certificate.
(Dr. Wagner)
Page 2 of 2
IBExU14ATEX1123 X
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
Continuation Sheet 01
On the basis of the test report 18-14-3-095/1 of 23 April 2015 the following specifications result:
The details are valid under the prerequisite that the Axial Fans of this type differ only insignificantly from the
tested sample concerning the electrical and thermal design.
- Thermal class: F
- Operation mode: S1
Blade angle: oo
This Continuation Sheet is only valid in combination with the EC-Type Examination Certificate
IBExU14ATEX1123 X.
IBExU14ATEX1123 X
Continuation Sheet 01
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
Continuation Sheet 02
On the basis of the test report I B-14-3-095/1 of 23 April 2015 the following specifications result:
The details are valid under the prerequisite that the Axial Fans of this type differ only insignificantly from the
tested sample concerning the electrical and thermal design.
- Thermal class: F
- Operation mode: S1
- Blade angle:
This Continuation Sheet is only valid in combination with the EC-Type Examination Certificate
IBExU14ATEX1123 X.
2
\:) cated completely and un
nn- changed. ln case of dispute, the
Seal German text shall prevail.
(Dr. Wagner) (ID no. 0637)
IBExU14ATEX1123 X
Continuation Sheet 02
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
Continuation Sheet 03
On the basis of the test report IB-14-3-095/1 of 23 April 2015 the following specifications result:
The details are valid under the prerequisite that the Axial Fans of this type differ only insignificantly from the
tested sample concerning the electrical and thermal design.
- Thermal class: F
- Operation mode: S1
- Blade angle:
This Continuation Sheet is only valid in combination with the EC-Type Examination Certificate
IBExU14ATEX1123 X.
IBExU14ATEX1123 X
Continuation Sheet 03
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
Continuation Sheet 04
On the basis of the test report 18-14-3-095/1 of 23 April 2015 the following specifications result:
The details are valid under the prerequisite that the Axial Fans of this type differ only insignificantly from the
tested sample concerning the electrical and thermal design.
- Thermal class: F
- Operation mode: S1
- Blade angle:
This Continuation Sheet is only valid in combination with the EC-Type Examination Certificate
IBExU14ATEX1123 X.
IBExU14ATEX1123 X
Continuation Sheet 04
IBExU Institut fr Sicherheitstechnik GmbH
An-Institut der TU Bergakademie Freiberg
Continuation Sheet 05
On the basis of the test report IB-14-3-095/1 of 23 April 2015 the following specifications result:
The details are valid under the prerequisite that the Axial Fans of this type differ only insignificantly from the
tested sample concerning the electrical and thermal design.
- Thermal class: F
- Operation mode: S1
- Blade angle:
This Continuation Sheet is only valid in combination with the EC-Type Examination Certificate
IBExU14ATEX1123 X.
IBExU14ATEX1123 X
Continuation Sheet 05