Paul Yaffe
See more at
Baggernation .com
Find It: Body & Plate Hol
ders | Pages 3-16 an
Lights | Pages 31-3 d 22-30
4
Monkey Bars, Ape
s & Cables | Pages
Rake Your Bagger 35-40
| 17-20
Wheels & Yaxles |
Pages 41-48
Grips, Pegs, Mirrors
& Accessories | Page
Pipes & Performan s 49-63
ce | Pages 64-71
Super Stereo System
s | Pages 72-75
Apparel | Page 76-7
7
Terms & Condition
s | Page 78
The
transformation
starts here.
Stretched Tank K
Stretched Saddlebags
1
orilla Bars
Raked Fairing
Kit
Yaxle
Banana Pedal
Domino Brake Arm
Banana Boards
High Roller Wheel & Rotor
2
Classic Stretched 21” & 23” Fender
Adding a 23-inch front wheel to your Bagger is all the rage! Paul loves the way a 23 looks on a bagger so much that he’s created a line of products just
for this conversion. This super high quality high pressure formed composite fender is styled in a classic Bagger fashion with a nice 4” stretch on the
tail for that slammed hot rod look. Check out the perfect 90 degree angle between the top and rear fender edges…Perfect symmetry will set your bike
apart from the pack and allow the eye to flow seamlessly across your custom. Each fender is 3-D molded and hand finished so there’s no need for
additional mounting blocks. We’ve handled all that! New for this year we’ve created a version of our Classic Stretched Fender for 21” wheel
conversions as well! Same awesome quality, no need for additional spacers, slammed with a 4”stretch just like the 23” version.
4
New - 21” DEI Fender
This classic sport styled front fender has been a best seller for years. Now Paul has
completely restyled this classic fender to totally compliment 21” wheel conversions.
He’s lengthened both front and rear and thickened the sidewalls. Deep drawn from
12 gauge steel (bullet proof and the strongest available) these babies aren’t spun and
welded... they are made from one indestructible piece!! Each fender is shipped raw
and not drilled so you can slam it as close to your tire as you dare. Additional fender
spacing is required which are on the previous page.
5
Paul Yaffe & Suzy / ROT 2009
Photo: Michael Lichter
7 Chupa shown without frenched plate
CFS-P CFF-K
CFS
n LEDghts D s
de
Hidcense L
i
d den LE
Light
Li Hi cense
Li
Part # CFS-08
D
Smooth 2008 - Earlier / Price: $714.95 LED en LE hts
Hiddeennse Lights Hidcdense Lig
Lic Li
Part # CFS-P-08
Frenched License No Wedgys 2008 - Earlier
Price: $814.95
Part # CFF-K-08
Full Frenched License w/ Wedgys 2008 - Earlier
Price: $1,374.95
Part# SRF-P
Smooth 8” Stretch Fender w Frenched Plate and License Frame
Price: $629.90
10
Stealth license frame
This nifty little license frame is super clean, super simple and is every-
thing a plate holder should be on a bagger... As invisible as possible!
Looks great on one of our shaved fenders with a set of our Bag Lights
or EZ Lights. Shipped chrome plated.
Hidden LED’s
any license plate application when no back plate is required. It has two little white
LED’s hidden in the corners to light your license. Available in chrome or black
anodized. Frame only no back plate available.
Part# - SLP2 / Stealth 2 License with hidden LED’s - Chrome / Price: $149.95
Part# - SLP2-B / Stealth 2 License with hidden LED’s - Black / Price: $149.95
11
Hidden LED’s
Before After
12
New - 6 Gallon Stretch
Tank Kits
Are you sitting down?!! It’s finally here!
Paul and CCI have created a full capa
city, deep drawn, 6 gallon stretch tank
that is absolutely amazing looking and
the quality is unbeatable!! Each kit come
s complete with a new tank, steel low
profile dash, chrome pop-up gas cap
and all the trim and hardware you’ll
need to swap your boring stock tank
new sexy stretched one! *seat modificati for a killer
on required*
13
14
15
LePera Silhouette Seats
for Bagger Nation Stretched Tanks
The LePera name has been an industry leader in cutting edge upholstery for over 30 years. So it was an obvious choice when we needed a
custom seat maker to supply us with killer seat styles. The LePera family was a perfect fit. Not to mention that Paul grew up around the LePera
kids and that Bob Sr. used to upholster Paul’s custom bicycle seats back in the day in the San Fernando Valley. So check out the New LePera
Silhouette seats that are custom fit to our stretched tanks! These super high quality steel pan low profile seats are the perfect compliment to our
sexy new Stretched Tank Kits. They offer superior comfort in a sleek low profile design and are a direct bolt on fit with our Stretch Tanks.
16
7 or 9 Degree Raked Tree Kits
Are you one of those guys who loves your bagger but wants to take it to another level? If so, then our 7 degree raked tree kit is for you!
Pricey.... you bet! Easy to install...No way! Is it the absolute best way to fit a 23” wheel and make your bagger look 9 feet long... Hell Ya!
Paul and his crew have spent countless hours cutting a chopping until they came up with what they believe is the perfect combination of
rake and trail so you can lay your bagger out and still have it handle perfectly! What we provide is a really nice set of HHI triple trees and
our optional Rake Block kit that comes with a picture by picture outline showing you everything you’ll need to do to set your bike up right!
Yes there is cutting, chopping, wiring, cussing, and expense involved! If it was cheap and easy... everybody would do it!
*Raked Tree Kit required with purchase. Not sold separately. Patent Pending
Part# RNB7 / Raked Neck Block 7 Degree for 23” Wheel / Price: $149.95
Part# RNB9 / Raked Neck Block 9 Degree for 26” Wheel / Price: $149.95
Part# RNB7-09 / Raked Neck Block 7 degree for 2009 and later frames / Price $169.95
Part# RNB9-09 / Raked Neck Block 9 degree for 2009 and later frames / Price $169.95
18
Visor Model
Price# - RFSB / Raked Fairing Support Bar (thru 2008) / Price: $120.00
Part# - RFSB-09 / Raked Fairing Support Bar (2009) / Price: $120.00
Part# - RFSB-10 / Raked Fairing Support Bar (2010, 2011) / Price: $120.00
Part# EXRGRFB / Exchange Road Glide Raked Fairing Bracket / Price: $249.95
20
Available in
Chrome or
Gloss Black
Part # TBA / Fairing Support Bar 2008 & Earlier - Chrome / Price: $149.95
Part # TBA / Fairing Support Bar 2008 & Earlier - Black / Price: $149.95
Part # FSB-C / Fairing Support Bar 2009 - Chrome / Price: $149.95
Part # FSB-B / Fairing Support Bar 2009 - Black / Price: $149.95
Part # FSB10-C / Fairing Support Bar 2010 - Chrome / Price: $149.95
Part # FSB10-B / Fairing Support Bar 2010 - Black / Price: $149.95
Handma
in the de
USof A Available in satin black
by special order!
21
Paul Yaffe & Suzy / Seattle 2009
Photo: Michael Lichter
22
Dresser Dash for
5 Gallon Tanks
Paul’s been making his fiberglass Dresser Dashes for a dozen years. Lately it seems like
everyone who’s jumpin’ on the Bagger craze has knocked the original off so Paul decided
to make a new one that bolts right on to stock or stretched tanks with new killer styling.
Paul’s new dash features hidden hardware, trick mount brackets, a chrome plated
low profile pop-up cap, and a killer sunken scallop that adds some cool style
to it. Paul’s new dash fits all models 1994 thru 2007 carb or EFI models
Hidden
Hardware!!
Unique
scalloped
accent
23
Unique
scalloped
accent
Easy
Install!
Minimal
Shaping!!
Part# - DD-FI08 / 6 Gallon Dresser Dash Kit 2008 and later models / Price: $299.95
24
Dresser Dash For
Custom Builders
This is the original raw extra long dash that Paul originally
offered for all custom applications. It can be used for a multitude
of custom installs including extra long stretched tanks & super sleek
Road King installs. Fabrication, modification & possibly frustration required!
Sold Separately: Install Hardware Kit, Pop-Up Gas Cap, Rubber Trim
25
Road King
w/ HD
skull gas
cap & fuel
gauge
26
Chop Chop Ultra Slim Tour Pack
We love this super skinny tour pack. It’s a full 2.5” slimmer than HD’s Chopped pack. Made from high quality fiberglass and flawlessly gel
coated, each kit comes assembled with genuine HD hinges and latches and a cool little back rest for the ladies! The packs are direct bolt on fit-
ment for HD’s tour pack racks and work great with detachable components. Paul thinks they are killer for weekend trips and it keeps his Bagger
looking low and long while allowing him plenty of storage space for longer trips. Suzy says the pack is totally comfortable to lean back on and
is far more comfortable than a sissybar. She says the best part is now she can bring all the shoes she wants! WOO HOO!
27
Option # 1
For those of you who may be less mechanically inclined, you can purchase the Chop Chop tour pack fully assembled with our Chop Chop
backrest installed. You can still custom paint it, however your painter will need to carefully tape off the hinges and latches.
Option # 2
You can purchase Chop Chop tour pack in kit form which includes all needed latches, hinges and hardware unassembled. This is a good op-
tion for those of you who plan to do custom paint before assembly. The backrest is included.
Option 2
See detachable
racks online at
baggernation .com
Option 1
28
Big Bag Stretched Bags
These are the highest quality aftermarket saddlebags I have ever seen! No expense has been spared creating these beautiful aerospace
uality bags. They are the perfect stretch amount, (not to long, so you won’t drag them in the turns) they have a gorgeous scallop treatment on
the side of the bag which is great for paint accents and adds an incredible wall strength to the bags. The stretch is full, all the way down so
you’ll pick up some extra bag capacity and the walls are double thick... no cracking here! They are pressure formed resin transfer and then
baked at 300 degrees so the shape you get is the shape the bags will keep! No more warping bags from heat exposure. They are finished
inside and out, (you won’t believe your eyes) they are pre-drilled so your existing latches and lids will bolt right on! These are truly the
nicest quality, best looking bags I’ve worked with and I wouldn’t put anything else on my ride. They are available in 3 exhaust outlet
choices: Dual Outlets / Single Right Side Outlet / No Exhaust Outlets…We have custom Chupa Rear Fenders to match any style you
choose! Shipped primered and paint ready.
29
Killa Bag Fillas
Finally some High style “Good Looking” components to fill the gap
between your saddlebags and your rear fender! Paul’s new filler panels are 3
dimensional in design to create a flowing look for the rear end of your Bagger. No
flat vibrating tin panels here! Our new composite panels are easy to install and can
be shaped any way you like! Paul shaped them long to fit perfect with stretched
rear fenders and saddlebags, but you can easily trim them to work with stock length
fenders and stock bags as well! Our fillers can be easily modified to work with
detachable tour pack accessories as well!
30
Wedgy Bag Lights
Super bright LEDs that function as: taillight, turn signals and
strobing brake lights. Increase your visibility over 50% while
making your Bagger look 100% cooler. Machined from 6061 T6
billet then beautifully chrome plated. Simple bolt-on
installation. Choose any of our three trick styles.
French them or get a Bag Light install kit for easy wiring
(Sold separately - pg. 34)
French them or get a Bag Light install kit for easy wiring
(Sold separately - pg. 34)
31
Bone Head Bag Lights
Introducing “The Bone Head”!! This is the latest addition to our ever popular Bag Light
series. Killer skull styling and our exclusive strobing smart chip that senses your braking
action! The eyes and nose are filled with super bright LED’s that function as: taillight, turn
signals and strobing brake lights. Increase your visibility over 50% while your bagger look
100% cooler! Machined from 6061-T6 Aluminum and then beautifully chrome plated.
Simple bolt-on installation or you can add a set of Bone Head frenchies (pg. 18) for the
ultimate custom install!
French them or get a Bag Light install kit for easy wiring (Sold separately - pg. 34)
Available in
black & chrome
33
Bag Light Install Kit
This simple kit will make quick work out of wiring your
new Bag Lights! Just plug it into your harness under your
seat, run the wires down the bag supports, Hook up the
taillight wires and clip the plugs together! That’s it!
You’re ready to ride and show off your new
Bagger Nation taillights! This kit also allows for
easy one plug bag removal when you are cleaning
or servicing your bagger... One kit hooks up two
saddlebag lights, one right & one left.
34
Monkey Guard Bars
Paul’s Monkey Bars are the hottest Bagger Bars available! Now you can continue the Monkey look with this Monkey styled engine guard. These
guards in stock and ready to rock in either black or chrome. They work on all Baggers 1997 to present.
36
Monkey Bagger Bars
Holy shit these bars are bitchin!! When Paul took to tricking out his Street Glide he wanted to combine chopper styling and attitude with a
unique handlebar that Bagger Nation could truly call its own! Talk about nailing it! Since we introduced the Monkey Bars we’ve seen some guys
trying to copy them, but the quality is shit, they made straight corners instead of our sexy arched points. They also have made no consideration
for internal wiring where we work the inside of our bars to make your wires go through smooth as possible! There is just no cutting corners
when it comes making high quality, great looking Original Monkey Bars! Believe us...You’ll get what you pay for! Our hand crafted, made one
at a time Monkey Bars are designed to fit all touring models with bat wing fairings such as Street Glides, Electra Glides and Ultra’s. Nothing
will add more attitude to your bagger than a set of Paul’s Original Monkey Bars! Our standard most popular size sits 12” tall (installed) 36”
wide with a 9” pullback with an 1.25” diameter. They are available in both chrome or gloss black powdercoated finishes. Custom heights from
10” thru 18” are available through special order by calling the shop. Each bar is pre-drilled for easier internal wiring. They also work with the
new fly-by-wire throttle system found on 2008 and later touring models.
Above bars fit all touring models with bat wing fairings from 1986 thru 2011
10 thru 18
inch available
10”
12”
14”
16”
37
OEM Monkey Bars
If you’re a Road Glide or Road King freak don’t feel left out! We make killer bars for your bike too! Paul wanted to lend all the
chopper styling and attitude he could to the Road Glide / Road King platform so he took a set of his classic Original Monkey Bars,
widened them a couple of inches, gave them some swoopy arches and WHAM... instant attitude adjustment! Our classic Monkeys were designed
for Road Glide / Road Kings but they fit on just about any OEM model out there! Softails, Fatbobs...You name it! Since we introduced the
Monkey Bars we’ve seen some guys trying to copy them, but the quality is shit, they made straight corners instead of our sexy arched points and
corners and they have made no consideration for internal wiring where we work the inside of our bars to make your wires go thru smooth as pos-
sible! There is just no cutting corners when it comes making high quality, great looking Original Monkey Bars! Believe us...You’ll get what you
pay for! Our standard most popular size sits 10” tall (installed) 33” wide with a 6” pullback with an 1.25” diameter. We also offer them in a 8”
thru 20” heights by special order. Taller bars will naturally get wider. 12” bars measure 33” wide and 15” bars measure 37” wide. They are avail-
able in both chrome or gloss black powdercoated finishes. Each bar is pre-drilled for easier internal wiring. They also work with the new
fly-by-wire throttle system found on 2008 and later touring models.
Above bars fit Road Glide / Road King and all Harley models 1986 thru 2011
8 thru 20
inch available
38
Apes
Available
12 & 15 inch
Bagger Apes
These perfectly balanced 6 bend bars are specifically designed for touring models with bat wing fairings such as Street Glides, Electra Glides and
Ultras. They will give your bike a major attitude adjustment as well as provide a natural extended arm position which will promote better han-
dling and incredible comfort on long trips. They are available in both chrome or gloss black powdercoat finishes and come in two heights: 12” tall
(installed) 37” wide with a 9” pullback (pictured) or 15” tall (installed) 37” wide with a 9” pullback. They are pre-drilled for internal wires and
are available in both 1” and 1.25” diameters. They also work with the new fly-by-wire throttle system found on 2008 and later touring models. We
recommend using our Supersize kit whenever installing Bagger Nation bars to make the job a breeze.
Above bars fit all touring models with bat wing fairings from 1986 thru 2011
Make sure to order a corresponding Supersize Kit on page the next page
39
Let us
1 Piece Riser Clamp show
you the
way!
Bagger Nation handlebars installed on 2007 and earlier touring models
MUST be updated with Harley-Davidson’s one piece riser clamp HD #
55918-08. All pre 2008 HD touring models have a two piece top clamp
system that we feel can create a safety problem when handlebars are
used with internal wiring. We stock Harley’s new updated riser top
clamp and will be happy to include one with your order. The solid riser
clamp retails for $39.95 and again MUST be used every time a
handlebar change is made to 2007 and earlier Harley Davidson
touring models.
Supersize Kit
The Supersize kits are the easiest way to make sure that you’ve got everything you’ll need to install your new Bagger Nation handlebars!
Each kit includes: Clutch cable, throttle cables (if needed) our pro-system brake line (if needed) wires, shrink, pull wire, instructions, gas-
kets and transmission fluid. Of course your contents will vary by model, year and equipment. We offer the kits in standard black or braided
stainless and we have kits for ABS equipped models as well! There are so many kit variations and combinations that we couldn’t possibly
list every part number! So please call us with your make, model, year and let us know if your bike has ABS or a hydraulic clutch and we’ll
give you the correct part # and price over the phone.
Custom finishes
available!
Measure it right!
40
The Legacy
Paul Yaffe’s Bagger Nation is now delivering their
latest mind blowing wheel design! CNC cut from
solid forged 3D blanks this 5 axis, convex spoke
design has had an overwhelming response ever
since Paul’s Road Glide debuted on the cover of
American Bagger Magazine! This amazingly
complicated design is now being cut in sizes
from 18” thru 23” diameters and is offered in
a flawless chrome finish.
41
DeVille
Killer spoke styling with a very unique spin. Angled
spokes show motion and give a brilliant light display
when spinning. Forged billet construction available
in brilliant chrome or black anodized with machined
accents on spokes. Matching rotors and pulleys available.
42
“Hoopla
Introducing “The Hoopla!” This is the latest hoop from Bagger Nation. Super clean minimal design that screams custom! Available in custom sizes
18” thru 30” by special order only. Wait until you see them roll…Now you too know what all the Hoopla is about! Please allow 4-8 weeks depending
on season. Matching rotors and pulleys available….
43
The GT Wheel
Classic 60’s styling with a killer-racing feel! Like the
steering wheel on your old Camaro! Forged billet
construction available in brilliant chrome. Matching
rotors and pulleys available.
44
Notorious
Paul’s most famous wheel design! He originally created this style for his
first Discovery bike. Awesome contemporary style with a killer
backwards rotation effect when riding! Outside rim edge details totally
reflect the light and draw attention to your ride! Forged billet
construction available in brilliant chrome. Matching rotors and pulleys
available.
“High Rollers
Classic 5 spoke hot rod styling makes your ride look like it’s
running 100 even when it’s sitting still! Forged billet
construction available in black anodized w/ machined
accents or brilliantly chrome plated. Matching rotor and
pulleys available.
Smoothie”
If you’re dying to put some PYO custom wheels on your bagger but
the $$$$ are a little tight, these Smoothie wheels will be right up your
alley! Paul had the wheels made special to match our chrome or anod-
ized black custom front wheel styles! The idea is pick out your favorite
front wheel style with a set of matching rotors. Then use one of our less
expensive Smoothie wheels on the rear with your stock rotor and pulley!
You can only see the bottom of the rear wheel anyway since it’s behind
the saddlebags! So you’ll still get all the great looks of a 2” larger rim
and a 150 - 200 tire, but you’ll save yourself on average about $1350 on
a killer set of our latest styles! That’s 30% less! Paul says “Try and beat
that deal”!!!!
The Yaxle
Paul’s new twist on the flush-mount axle. A great accent to your fork and a perfect
way to lose that big clunky thing your bike came with. Available in 3 finishes smooth chrome,
Domino chrome or anodized black w/ machined Domino accents. 3/4” / 1” Or 25mm axle sizes available to fit
all models through 2011!
Axle
Part# - YAXLE99 / Yaxle 3/4” / Fits touring models 1986-1999
Part# - YAXLE / Yaxle 1” / Fits touring models 2000-2007
Part# - YAXLE08 / Yaxle 25mm / Fits touring models 2008-2011
End Caps
Part# - BDC / Domino Cap Black
Call Now
Part# - CDC / Domino Cap Chrome
Part# - PCC / Smooth Cap Chrome
Price: $149.95
Choose from
To order choose axle and end cap.
Example: YAXLE99 / PCC - 86-99 = Yaxle w/ Smooth chrome caps
3 killer Styles5
602.840.420
Domino Cap Domino Cap Smooth Cap
Chrome Black Chrome
48
Bitchin’ Road Glide Turn
Signal Eliminators
Paul loves Road Glides! One of the first things he does when customizing one is
relocating the stock turn signals. The problem that arises is the ugly holes that
are left in the fairing when you remove the stock units. Problem Solved! Paul
created these slick turn signal hole covers that look great and are easy to
install. Each cover is CNC machined from 6061-T6 aluminum and then
flawlessly chrome plated or black anodized & accent machined.
Part # RGBTSE-C / Bitchin Road Glide Turn Signal Eliminators - Chrome / Price: $69.95
Part # RGBTSE-B / Bitchin Road Glide Turn Signal Eliminators - Black / Price: $69.95
2 Styles!!
Part # SGTSE-C / Domino Turn Signal Eliminators - Chrome / Price: $84.95
Part # SGTSE-B / Domino Turn Signal Eliminators - Black / Price: $84.95
Part # YB-TSE-C / Yafterburner Turn Signal Eliminators - Chrome / Price: $84.95
Part # YB-TSE-B / Yafterburner Turn Signal Eliminators - Black / Price: $84.95
51
Racing Hand Levers
In his never ending pursuit of “more speed” Paul commissioned an independent aeronautic
laboratory to determine the wind drag on stock HD hand levers vs his 40% lighter
graduated hole lever style. When the results were released the data was astounding!
Paul’s new lever design not only increased stopping power by an amazing 20%...They also
added 10mph to his top speed!! OK, that’s a bunch of bullshit but these levers
are the coolest looking design we’ve ever seen. Hand crafted one at a time and then
flawlessly chrome plated or black powder coated to match factory controls and
accent machined. Available for 1996 through 2007 and for 2008 and later
models. We have CVO levers too!
52
53
Available
to match
your black
Yafterburner
exhaust
tips too!
54
The Last Set Of Mirrors You’ll Ever Buy!
Power Mirror
This awesome combination was created exclusively for Yaffe’s 1999
Oakland Roadster Show Champion, “Sliver”. Now they are available for
your custom as well. Made in the USA from 6061 aluminum & beauti-
fully chrome plated.
*Complete the look with The Wedgy Bag Lights and floor boards.
Our mirrors have Part# - PMP-B / Power Mirror Pair Black / Price: $239.00
PMP includes 2 mirrors & 2 arms
no visible hardware
and are guaranteed
for life to never
come loose!
Bagga Chips
If you want to change the fairing mounted mirrors on your Street Glide,
the solution is here! Simply use a set of our Bagga Chips to cover the
holes left in your inner fairing and add some cool style to your glide at
the same time! Each set is carved out of 6061-T6 aluminum and
available in chrome or Black accent finishes. Hardware and simple
installation instructions included.
55
Available
soon for
For years Paul Yaffe Originals has brought you the Fly By Wire
finest fit & feel. Our exclusive top-secret urethane com-
pound brings unparalleled pleasure to your ride. Perfect fit,
Models
perfect length, perfect feel. Check out our newest styles like
the Bullet, Ali-Baba or Classic round comfort tip. They’re
designed to please!
All of our grip styles feature removable end caps that make
your handlebars a really cool place to stash your registration
or whatever you feel like hiding!
Rubber Grips
and Pegs
Part# - RG / Classic Rubber Grips / Price: $198.95
Part# - RP / Rubber Pegs / Price: $106.95
Part# - RS / Shifter Peg / Price: $39.95
56
Yafterburner Saddlebag Latches
Awesome! Another cool looking part in the Yafterburner family of style! Check out the great looking saddlebag latch covers that match all of our
Yafterburner styled products. These latch covers and CNC machined from 6061-T6 aircraft aluminum and the beautifully chrome plated or black
anodized and then accent machine cut. We even managed to hide all the mounting hardware for an extra clean look! These are a direct bolt-on item that
require no modifications. Mounting hardware included.
57
Banana Boards
These have been Paul’s favorites for over a decade! Awesome styling and the extra length gives
the rider many foot positions for long distance comfort. American made so you know the
quality and fitment is guaranteed!
58
Get the Yaffe Look!
Choose any three Yafterburner accessories & save 10%
when ordering at the same time.
59
60
Paul lit / New Orleans 2009
Photo: Michael Lichter
61
Super Bling
Black
Groovy Link
Super Bling
Landry Link
Holy Link
Bar Tips
Here’s a great little detail that Paulie uses on all of his
bagger conversions. First we cut off that ugly cross bar
over the rear fender that comes stock on all baggers,
then, we fill the holes with our trick little bar tips that
are available in 4 styles... round tips, pointed tips,
stair-stepped tips and our new bullet tips. Machined
from 6061-T6 aluminum and beautifully chrome plated.
62
Yafterburner Ignition
Switch Cover
Paul’s Yafterburner series fork covers and pipe tips have been so
popular that he’s decided to create an entire line of Yafterburner
styled accessories. The first in the series, is our new ignition switch
cover for touring models. Each cover is machined from a solid block
of 6061-T6 aluminum and the beautifully chrome plated or black
anodized and then accent cut. Easy 1 minute install.
63
All New Phantom Bag Pipes
We had a good response over the past year to our radical two into one Bagger Phantom Pipe…Paul had originally intended it to be longer
and wanted to develop a tuned baffle for it, and here is the result! Introducing the all new “Bag Pipe”…Longer, curvier, with a removable
baffle for those who roll bold! Nothing compares to the look and sound of this pipe and we have the no outlet stretch bags and Chupa
fenders available for a truly radical custom look! Black ceramic coated with four piece stylized chrome heat shields and removable core.
You know you want it!
64
Paul & Seattle PD / Seattle 2009
Photo: Michael Lichter
New Loud and Proud
SE Race Mufflers
We all know that the SuperTrapp brand is synonymous with
Horsepower! Well now even more so! Introducing our NEW SE
Mufflers w/ Mikuni Race cores! Improved flow, more torque and a Performance Core
loud distinct sound of their own! So now you’ve got two choices, our
traditional SuperTrapp SE mufflers or our new louder, prouder SE
Race Muffler. Of course all of our awesome designer tips are
available for both models.
Be A
Speed
Race Core
Freak!
67
Shown with optional
Yafterburner tips
SuperTrapp® makes the best performing mufflers in the industry. Now they’ve teamed up with Paul to develop a great looking, great
performing muffler system for all HD baggers 1986 through 2011. The standard SE mufflers and baffles have a deep rumble sound and offer
improved throttle response and horsepower throughout the RPM range. You can also choose to have us replace the standard baffles with our
exclusive high output Mikuni cores which are perfect for modified engines or for those who really want to make some noise! Now for the really
cool part... Paul has designed a selection of designer exhaust tips so you can choose a style that really suits the desired look for you bike! Choose
from a selection of classic designs or one of Paul’s radical sets like the popular “Yafterburners” or the new “Holy Molys” as well as the “Claws”
or “Big Poppas”. Either way you can’t buy a better performance muffler than SuperTrapp® and with our huge selection of tips you can make
them your own!
All tips are sold separately in pairs. See them on the next page.
68
Supertrapp SE Pipe Tips ®
A
Choose from our 4 new PYO designer tips or from the great selection
that SuperTrapp® offers. The “Holy Moly” / “Yafterburners” / “Claws”
and / “Big Poppas” are Paul’s new designer tips. You can choose from
Holy Moly
the 8 styles that Supertrapp® offers. The “ Turndowns” / “Rockets” /
“Cones” / “Java Jugs” / “Tapered” and “Slash Cuts”, are all stamped
B
steel. Then there’s three billet styles, “Grooved” / “Fluted” or
“Tapered”. No matter which you choose, nobody offers a styling
selection like Paul and SuperTrapp®. We’re sure you’ll find one that
fits your style! These pipes have a great deep rumble sound, improved
throttle response, and two baffle choices. They make the most
C
horsepower of any aftermarket slipon exhaust system. You’ll have
the coolest looking pipes in town.
Yafterburners
PIPE TIPS SOLD SEPARATELY
D
A Part# - SE-TIPS-HOLY-B / SuperTrapp® SE Tip, Holy Moly, Black
Price: $249.00 Pr.
70
Force Air Cleaner Kit
This is the original forward elbow kit that Paul along with John from Force
products developed 15 years ago! Since then it seems that everybody in our
industry has made their own version of it. Our force kit comes with everything
you’ll need to bolt our high flow system directly to your carb or EFI powered
bike. The cool part is the way our system looks! It gives an all business very
racy look to your bagger! And believe us... baggers can use it!
Kit includes: Chrome support bracket w/ internal breathers and chrome breather bolts, polished intake elbow,
genuine K&N air filter w/ stainless mount band.
Filter Fairing
As if the Bagger Force Air Cleaner Cover wasn’t cool enough, we also offer
this handmade steel accent piece which comes chrome plated or raw if you
want to paint it to match your bike. Each cover is handmade. See it installed
on page 2 or 5
71
300 watt 6
speaker for
Road Glides
Part# RG-SSS / Road Glide Super Stereo System / Price: $1499 complete
Our kit includes: all speakers, amps, crossovers, satellites, wiring, instructions and tip sheets needed for installation.
72
Triple your output in
20 minutes! Plug & Play
Part # PNP120 / 120 Watt P&P Amp with 60 Watt Speakers ( Shown above) / Price: $675.90
Part # DCS1202 / DCS Series 2 Channel Amplifier System, 120W (60x2) / Price: $495.95
Part # PSC1502 / PSC Series 2 Channel Amplifier System, 150W (75x2) / Price: $595.95
Part # PSC3004 / PSC Series 4 Channel Amplifier System, 300W (75x4) / Price: $999.95
Part # RX504-50 / RX Series 4 ohm Performance Speakers, 51/4” 50W -pair / Price: $139.95
Part # DX504-70 / CX Series 4 ohm Component Speakers, 51/4” 70W - pair / Price: $249.95
Part # SX504-60 / SX Series 4 ohm Component Speakers, 51/4” 60W - pair / Price: $179.95
Part # GBV525 / Harley Lowers Speaker Adapter, Vented Style / Price: $169.95
Part # GBS525 / Harley Lowers Speaker Adapter, Un-Vented Style / Price: $169.95
Part # SG5252 / 51/4” Grilles for Batwing Fairings- Metal-pair / Price: $19.95
73
Amazing Sound!
74
P1652-S
P1653
P1S652 P1694
75
See all of
Paul’s Unbareabl
e
Apparel Signatu
re
Series Tees at
BaggerNation .co
m
76
Part# 8Ball / Eight Ball Tee - BLK
Part# 8Ball-W / Eight Ball Tee - WHT
Sizes - M, L, XL, XXL / Price: $20.00
3XL - 5XL add $5.00 / Price: $25.00
77
Terms And Conditions
Paul Yaffe Originals / Bagger Nation Showroom
2211 E Indian School Road
Phoenix, Arizona 85016
(602) 840-4205
Mon-Fri 9-5 *Showroom hours may vary seasonally
Dealers: We offer dealer accounts to licensed Motorcycle related businesses operating in a retail capacity serving the general public. (showroom, Tax license, yellow
pages ad and a completed dealer application are required) A motorcycle related business conducts retail sales, parts and accessories and/or service. We reserve the right
to refuse dealer status to any individual or company that we feel does not meet our requirements. Discounting the suggested retail price of our products (such as
with internet stores) will result in the immediate revocation of dealer status.
Dealer Advertising Agreement: Any dealer, distributor or Retailer of any Paul Yaffe Original or Bagger Nation product (s) agrees that in no instance may the Paul
Yaffe Original or Bagger Nation logo’s, Name, similar mark or any material subject to copyright protection, be used in or be associated with any advertising that
mentions, suggests or in some form is linked to a price below the suggested retail price published by Paul Yaffe Originals or Bagger Nation. Failure to comply with
this policy will result in Paul Yaffe Originals and Bagger Nation terminating the agreement between Paul Yaffe Originals and the party involved.
Pricing: We reserve the right to change prices, policies and terms at anytime without prior notice.
Backorders: Every effort is made to keep all items in stock at all times. Occasionally some product may be backordered. We will make every effort to deliver
backordered products as quickly as possible and we will call before shipping any backordered products that have been on order more that 30 days.
Special Orders: Special orders are exactly that... Special. We will try to fill all special orders as fast as possible. However, special orders take as long as they take and
cost as much as they cost. There are often factors pertaining to these items that are out of our control. All special orders will require at least a 50% deposit and Special
orders may not be cancelled for any reason. There are no refunds on Special Orders. Things that fall under the Special Order policy are: One-of-a-kind items, another
manufacturers item that we order specifically for you, Any roller, or turn-key custom motorcycle, any stocked item that we modify at your request.
Freight: Shipping is the responsibility of the purchasing party and all incurred shipping expenses will be added to the total purchase price at time of
shipping unless other arrangements have been made at time of purchase.
Returned Checks and Refused Shipments: All returned checks and refused shipments will result in a $45.00 processing fee. No exceptions
Merchandise Returns: A returned goods authorization (RGA) is required for any item being returned to our warehouse. You must call and make
arrangements for a returned item to obtain an RGA number. No freight or restocking fee will be charged on goods found to be defective or not as ordered. Returns for
any other reason will be charged a 20% Re Stocking fee. All sales are final on Blem, Discontinued or Closeout items and Apparel. All returns are subject to inspection
and verification before any credit is offered. Mark the letters RGA and the number given on the outside of the package and return it postage prepaid to the showroom
address above. All returns without correct RGA information prominently displayed on the outside of the package will be refused. All retail returns will receive a
repaired or replaced item at the discretion of Paul Yaffe Originals or a merchandise credit. No refunds will be issued.
Catalog Contents: We believe the contents and specifications of this catalog to be accurate and correct. We assume no liability foe any errors in listings,
specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, pricing and applications of any product
at anytime without further notice and without further obligation. The reproduction of any material from this catalog is forbidden without our written approval.
Important: Paul Yaffe Originals and Bagger Nation are in no way, shape or form connected with The Harley-Davidson Motor Company. Any products with a
trademark, name, word, O.E.M. number used in this catalog by Paul Yaffe Originals and Bagger Nation are strictly intended, solely as a reference as to that particular
part. None of our parts are D.O.T approved. All of our parts are intended for custom applications. You and only you are ultimately responsible for determining the
suitability of any product and your intended use of that product for your application. Therefore you assume any and all responsibility for any outcome resulting from
use or installation of any of our products in any manner. Paul Yaffe Originals insists that you test fit any product prior to painting or cosmetic finishing. Modifying any
Paul Yaffe or Bagger Nation product for your particular application voids all warranty. Paul Yaffe Originals and Bagger Nation will not be held responsible for any
paint or labor expenses under any circumstances and will not accept for return any product that has been modified or damaged due to improper installation.
Limited Warranty
Improper Care or Misuse: Paul Yaffe Originals and Bagger Nation shall have no warranty obligation in the event that goods have been modified by any other person
or organization, or where goods become defective in whole or in part as a result of improper installation, improper maintenance, improper use, abnormal operation or
any other misuse or mistreatment of the goods.
Proof of Purchase: Paul Yaffe Originals shall have no warranty obligation in the event the customer is unable to present a receipt evidencing the date on which the
customer purchased the goods.
Exhausts: Exhaust systems are warranted for manufacturing defects only. There is no warranty on exhaust pipes or mufflers with regard to any
discoloration. Discoloration (bluing) is caused by tuning characteristics, carburetor jetting, overheating, etc...It is not caused by defective manufacturing.
Chrome plating: If after initial inspection a flaw is discovered in the chrome, DO NOT INSTALL IT!! Please call Paul Yaffe Originals for an RGA and we will replace
the item at no charge. If chrome fails after installation during our one year warranty period we will re-plate the item at our expense and return the item to you. Please
use caution when installing chrome plated components, the finish is fragile. Especially when mating two chrome components together. Always use anti-seize when
using chrome hardware on chrome plated products. Paul Yaffe Originals and Bagger Nation recommend using a quality wax or polish on chrome to protect their finish.
Consequential Damages: Paul Yaffe Originals and Bagger Nation shall not be liable for any consequential or incidental damages arising from the breach of any
warranties, the failure to deliver, delay in delivery, in non-conforming condition, or for any other breach of contract or duty between Paul Yaffe Originals or Bagger
Nation and the customer. Paul Yaffe Originals and Bagger Nation cannot control any environment that our products may be subjected to and our warranty coverage
only extends to our products in their original un-installed / as purchased form. Paul Yaffe Originals and Bagger Nation will not under any circumstances warranty paint
or installation / removal labor on any product unless said product was purchased from Paul Yaffe Originals or Bagger Nation in an installed or painted form.
Photos: Kriegmark, Micheal Licther, Paul Markow, Buck Lovell, Bob Feather
Cover Art: Jim Smith | Art Direction, Design & Layout: Kriegmark.com
Paul Yaffe’s Bagger Nation
2211 E Indian School Rd. - Phoenix, AZ 85016
602.840.4205
baggernation.com - paulyaffeoriginals.com