udj
filehgkjh
/end COMPU_METHOD
gsdf
given
hfhhg
/* Note:
*/
/* Testbench with ASAP3 do not support text. It is common use that the MCD tools
transfer the */
/* internal value instead
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Measurements
*/
/*
*/
/* Note:
*/
/* In this example the values for Resolution and Accuracy are set to "0" as they
are normally */
/* not evaluated by measurement and calibration tools
*/
/* It is allowed to use the same address for multiple measurements. By this it is
possible */
/* to use different bitmasks / computation methods for the same int value
*/
/*
*/
/* Note:
*/
/* There is for each data type one example
*/
/* With one data type (UBYTE) there is for each computation method an example
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Record Layouts for Characteristics (Parameters)
*/
/*
*/
/*
===================================================================================
=========== */
/*
===================================================================================
=========== */
/*
*/
/* Scalar Characteristics (Parameters)
*/
/*
*/
/* Note:
*/
/* MAX_DIF is always set to 0 as it is normally not evaluated by measurement and
calibration tools */
/*
*/
/* Note:
*/
/* There is for each data type one example
*/
/* With one data type (SWORD) there is for each computation method an example
*/
/*
*/
/*
===================================================================================
=========== */
/end MODULE
/end PROJECT