microprocessor PID-temperature controller from +10 C (however, at least 5 C above with integrated autodiagnostic system with ambient) up to +95 C with additional boiling fault indicator mode (+100 C) solid state switching unit Voltage / Power Rating one Pt100 sensor class A in 4-wire-circuit 230 V (+/- 10%), 50/60 Hz integrated digital timer from 1 min. to 99,59 hours for: ca. 2.000 W (during heating) ON continuous operation WAIT (delayed on for continuous and limited Packing Data timed operation) HOLD net weight approx. 16 kg digital display (LED) of set and actual gross weight carton approx. 20 kg temperature (0,1 C resolution) and of dimensions approx.: (remaining) programme time carton w x h x d: 67 x 53 x 46 cm LEDs for indication of programme status the appliances must be transported upright
Overtemperature protection (double) Customs Tariff Number
in case of overtemperature due to failure, the 8419 8998 heating is switched off at approx. 10 C above the set temperature (fixed value) Country of Origin mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30 Federal Republic of Germany C above max. temperature of the bath WEEE-Reg.-No. Textured Stainless Steel Casing DE 66812464 l x w x h: 578 x 436 x 296 mm material 1.4301 (ASTM 304), corrosion resistant Accessories Flat stainless steel cover with L0 Interior - Heating Concept openings and concentric ring sets (6 l x w x h: 350 x 290 x 220 mm, 22 l openings / 87 mm diameter) easy-to-clean interior, made of stainless steel, Gable stainless steel cover mounted L1 reinforced by deep drawn ribbing, material no. for condensate drainage 1.4301 (ASTM 304), laser-welded Water level control (for WNB, WNE, L3 corrosion-proof large-area heating on three WPE) sides