1 Introduction
Suppose we are required to design a Type I/II linear phase lowpass FIR filter that meets the
following specification using the Kaiser window method:
3. Next we choose qc = (qs + q p ) 2 = 0.325p. This yields the first-cut design with
magnitude response shown below
1.2
0.8
|H(e )|
j
0.6
0.4
0.2
0
0 0.2 0.4 0.6 0.8 1
(x)
Y H Leung (2016) 1
2 The Challenge
3 How to Submit?
4 Aids
(i) In Blackboard, under Quizzes, you will find a MATLAB script which you can use and
modify to fine-tune the first-cut design. The script is called Kaiser_LP_Design.m.
Have fun!
Y H Leung (2016) 2