Before starting assembly:Writing the number of each section on its back side before
Indicates where sections
cutting out the sections is highly recommended.
should be glued together.
(* This way, you can be sure which section is which even after cutting out the sections.)
http://www.canon.com/c-park/en/
Assembly Instructions
Glue
Mountain fold(dotted line)
The glue spot(colored dot)
Make a mountain fold.
shows where to apply the glue.
Valley fold(dashed and dotted line)
Make a valley fold.
Glue spot(Red dot) 5 era H
ouse
Glue parts with the same number together. ey Op ustralia
Sydn Sydney, A
Before gluing, crease the paper along mountain fold and valley
Assembly tip fold lines and make sure rounded sections are nice and stiff.
1
Sydney Opera House (Australia): Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc.
A & A Co., Ltd.
9
13
10
15
12
14
11
2
Sydney Opera House (Australia): Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc.
A & A Co., Ltd.
Insert
between
(3) Build the lower level of the structure. the folded
25 sides.
21
Insert
between
the folded
sides.
19
18
17
Insert
between
the folded
sides.
20
16
22
When assembling this section, first attach parts 21, 22, 24,
Insert between
and 25 to part 17, then connect the parts together by adjusting the folded sides.
the location of the connection between each part.
3
Sydney Opera House (Australia): Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc.
A & A Co., Ltd.
41
Glue in the same way 34
as on the opposite side. 31
Glue along the dotted line. 30
23
33
26 27
Bend this piece slightly
before gluing it.
28
Large hall 41
Glue in the same
way as part 29.
(4) Build the large and small halls and the restaurant.
32 35
Assemble parts 33, 35, 38, 45, 52, 55,
and 56 in the same general way.
40
Glue in the same
way as on the opposite
side.
39 Bend this piece slightly
before gluing it.
38
29
Glue together.
36 37
4
Sydney Opera House (Australia): Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc.
A & A Co., Ltd.
47 49 53
Glue in the same way Restaurant
61 59
Small hall
Glue in the same as on the opposite side. 51 60
50
way as part 46. 54
55 Glue in the same way
as on the opposite side.
48
57
Glue in the same way
as on the opposite side. 56
52
45
44 Bend this piece slightly
before gluing it.
Bend this piece slightly
before gluing it.
46 49
Glue in the same way
as on the opposite side.
58 Bend this piece slightly
Bend this piece slightly before gluing it.
before gluing it.
61
43 48
Glue parts 46, 47, 48, 49, and 61 in place last,
42 Glue one side to the rear side after assembling all these parts together,
of part 44 and one side
to part 50.
adjusting the assembled parts while doing so.
(5) Glue the large and small halls and the restaurant
to (3) the lower section of the structure (3).
Small hall
Large hall
Restaurant
5
Sydney Opera House (Australia): Assembly Instructions Canon is a registered trademark of Canon Inc. Canon Inc.
A & A Co., Ltd.
(6) Complete the model by gluing the base assembled in step (1) to the foundation assembled
in step (2) and the structure assembled in step (5).
(5) Structure
(2) Foundation
(1) Base
Finished!