Abstract
Entre 200 y 300 palabras es adecuado (mximo 300). Recuerden la estructura y que debe ser en ingls.
2.1.2. Sub-seccin_2
2.2.1. Equipment
The water jet used for the adhesion test of spat was the
Fig. 1. Experimental setup for the spat adhesion strength measurements.
water flosser WaterPik AquariusTM Professional, which has
ten pressure settings. The tip selected for the assays was the
Pik PocketTM tip, also provided by WaterPik. Deionized
3. Resultados y discusin
water was used in all the experiments.
1
Fr = (Volume of water jetted)/(Jetting time) (1) 6. Material suplementario
Las grficas pueden tener el formato que quieran, pero En caso de que tengan material suplementario (i.e. que
intenten que se vean consistentes con el documento; por no sea relevante completamente en el cuerpo del artculo)
ejemplo, en tipo y tamao de letra. Los colores estn a su que deseen incluir sin afectar el nmero de pginas, deben
criterio, pero deben tener eso en cuenta a la hora de imprimir. mencionarlo en esta seccin, describiendo muy brevemente
A continuacin, se presentan dos ejemplos simples, uno en de que trata.
blanco y negro (Fig. 2) y otro en color (Fig. 3).
Referencias
(1) Cass, F.; Stafslien, S. J.; Bahr, J. A.; Daniels, J.; Finlay, J. A.;
Callow, J. A.; Callow, M. E. Biofouling 2007, 23 (12), 121
130.
(2) Walker, J. M. The protein protocols handbook; Humana Press:
Totowa, New Jersey, 1996.
Fig. 3. Comparison between the adhesion strength of the 2-month old spat
on glass and plastic slides. The adhesion strength is presented in terms of
the pressure setting of detachment, so that the eleventh pressure setting
represents no detachment under the conditions of analysis.
4. Conclusiones
5. Agradecimientos
Opcional.