www.swagelok.com
We ld Fi t ti n gs
FITTINGS
WELD
Ultrahigh-Purity, Specially Cleaned, and Industrial
316, 316L, 316L VAR, and 316L VIM-VAR stainless steel materials
Consult ASME Boiler and Pressure Vessel Code, ASMEB31.1, Tube butt weld
ASMEB31.3, or other applicable codes for information on Automatic tube
weld setup, technique, and additional considerations for butt weld
welded systems. Automatic tube
socket weld
The choice of fitting, pipe, and tubing material being welded
is critical. Using the same materials will ensure the same Tube socket weld
coefficients of expansion and will reduce the possibility of Pipe socket weld
poor welds, out-of-roundness, or dimensional changes that Pipe butt weld
are detrimental to a good weld.
FITTINGS
400 (204) 0.96 0.77
WELD
room temperature tensile and yield strengths equivalent to
600 (315) 0.85 0.67
316 stainless steel.
800 (426) 0.79 0.62
Pressure derating factors for applications at temperatures
greater than 100F (37C) were determined from these 1000 (537) 0.76 0.56
pressure codes and are listed in the table at right.
Examples:
Elevated-Temperature Factors A 1/4 in. 316L VIM-VAR reducing union has a pressure rating
of 5100 psig (351 bar), as shown in the table below. To obtain
To determine elevated-temperature pressure ratings in
the pressure rating at 400F (204C), multiply 5100 psig
accordance with B31.3 and B31.1, multiply the pressure
(351bar) by 0.77:
ratings provided in the ordering number tables on the pages
5100 psig (351 bar) 0.77 = 3927 psig (270 bar)
that follow by the factors in the table at right.
A 1/4 in. 316 SS tube socket weld union has a pressure rating
of 10 700 psig (737 bar), as shown in the table on page13.
To obtain the pressure rating at 400F (204C), multiply
10700psig (737 bar) by 0.96:
10700psig (737 bar) 0.96 = 10 272 psig (707 bar)
Alternative elevated-temperature factors may be chosen from
ASME B31.3 or B31.1 at the users discretion.
Reducing Union
Dimensions
Tube Wall Tube Wall Ordering Pressure
B OD Thickness OD Thickness Number A B B1 Rating
B1
Dimensions, in. (mm) psig (bar)
1/4 0.035 1/8 0.028 6LV-4MW-6-2 5100 (351)
3/8 0.035 1/4 0.035 6LV-6MW-6-4 0.75 0.42 0.25 3300 (227)
A 1/4 6LV-8MW-6-4 (19.0) (10.7) (6.4) 3700 (254)
1/2 0.049 0.035
3/8 6LV-8MW-6-6 3300 (227)
4 Weld, VCR, VCO, Pipe, and Vacuum Fittings
Reducing 90
Dimensions
Union Elbow Tube Wall Tube Wall Ordering Pressure
OD Thickness OD Thickness Number A B F, in. L Rating
A Dimensions, in. (mm) psig (bar)
L
B 0.69 0.47 3300
3/8 0.035 1/4 0.035 6LV-6MW-9-4 7/16
(17.5) (11.9) (227)
0.25 3700
1/4 6LV-8MW-9-4
0.81 (6.4) 0.53 (254)
1/2 0.049 0.035 9/16
(20.6) (13.5) 3300
A 3/8 6LV-8MW-9-6
(227)
L
Dimensions, mm (in.) bar (psig)
F flat B
17.5 11.9 310
8 6 6LV-8MMW-9-6M 7/16
(0.69) (0.47) (4499)
17.5 11.9 240
10 6 6LV-10MMW-9-6M 7/16
(0.69) 6.4 (0.47) (3483)
1.0 1.0
(0.25)
6 6LV-12MMW-9-6M
20.6 13.5 200
12 9/16
(0.81) (0.53) (2902)
8 6LV-12MMW-9-8M
Extended Leg
Dimensions
90 Union Elbow Tube Wall Ordering Pressure
OD Thickness Number A A1 B B1 F L L1 Rating
A
L Dimensions, in. (mm) psig (bar)
B 0.76 0.45 0.61
6LV-4MW-9-03442
0.56 (19.3) 0.25 (11.4) 0.41 (15.5)
(14.2) 0.81 (6.4) 0.50 (10.4) 0.66
6LV-4MW-9-03443
(20.6) (12.7) (16.8) 5100
A1 1/4 0.035 5/16
(351)
F flat L1 6LV-4MW-9-03444 0.76 (19.3) 0.45 (11.4) 0.61 (15.5)
B1
6LV-4MW-9-03445 0.81 (20.6) 0.50 (12.7) 0.66 (16.8)
45 Union Elbow
Dimensions
Tube Wall Ordering Pressure
A
L OD Thickness Number A B F L Rating
B Dimensions, in. (mm) psig (bar)
1/4 0.035 6LV-4MW-5 0.47 (11.9) 5/16 0.41 (10.4) 5100 (351)
3/8 0.035 6LV-6MW-5 0.56 (14.2) 0.25 (6.4) 7/16 0.47 (11.9) 3300 (227)
1/2 0.049 6LV-8MW-5 0.64 (16.3) 9/16 0.53 (13.5) 3700 (254)
F flat
Weld FittingsUltrahigh-Purity, Specially Cleaned, and Industrial 5
FITTINGS
WELD
1/4 0.035 6LV-4MW-3 5/16 0.41 (10.4) 5100 (351)
0.25 (6.4)
L 3/8 0.035 6LV-6MW-3 0.94 (23.9) 7/16 0.47 (11.9) 3300 (227)
1/2 0.049 6LV-8MW-3 1.06 (26.9) 9/16 0.53 (13.5) 3700 (254)
Dimensions, mm (in.) bar (psig)
6 6LV-6MMW-3 20.8 (0.82) 5/16 10.4 (0.41) 420 (6095)
8 6LV-8MMW-3 23.9 (0.94) 7/16 11.9 (0.47) 310 (4499)
1.0 6.4 (0.25)
10 6LV-10MMW-3 23.9 (0.94) 7/16 11.9 (0.47) 240 (3483)
12 6LV-12MMW-3 26.9 (1.06) 9/16 13.5 (0.53) 200 (2902)
A1
F flat L1
B1
Reducing Tee
Dimensions
Tube Wall Tube Wall Ordering Pressure
A OD Thickness OD Thickness Number A B F, in. L Rating
F flat L
B Dimensions, in. (mm) psig (bar)
0.94 0.47 3300
3/8 0.035 1/4 6LV-6MW-3-6-4 7/16
(23.9) (11.9) (227)
0.25 3700
1/4 0.035 6LV-8MW-3-8-4
L 1.06 (6.4) 0.53 (254)
1/2 0.049 9/16
B (26.9) (13.5) 3300
3/8 6LV-8MW-3-8-6
(227)
Dimensions, mm (in.) bar (psig)
23.9 11.9 240
10 6 6LV-10MMW-3-10M-6M 7/16
(0.94) (0.47) (3483)
6.4
1.0 6 1.0 6LV-12MMW-3-12M-6M
26.9 (0.25) 13.5 200
12 9/16
(1.06) (0.53) (2902)
8 6LV-12MMW-3-12M-8M
6 Weld, VCR, VCO, Pipe, and Vacuum Fittings
Tribow
Dimensions
Tube Wall Ordering Pressure
OD Thickness Number A B F, in. L Rating
B Dimensions, in. (mm) psig (bar)
L 0.56 0.41 5100
1/4 0.035 6LV-4MW-91 5/16
(14.2) (10.4) (351)
F
flat 0.69 0.25 0.47 3300
3/8 0.035 6LV-6MW-91 7/16
(17.5) (6.4) (11.9) (227)
A 0.81 0.53 3700
1/2 0.049 6LV-8MW-91 9/16
(20.6) (13.5) (254)
This unique design has weld ends in three
planes at 90 to each other. It permits greater Dimensions, mm (in.) bar (psig)
flexibility in designing systems, especially 14.2 6.4 10.4 420
6 1.0 6LV-6MMW-91 5/16
(0.56) (0.25) (0.41) (6095)
where space is limited.
90 Union Elbow
Dimensions
Tube Wall Ordering Pressure
L OD Thickness Number B F, in. L Rating
B F flat Dimensions, in. (mm) psig (bar)
1/4 0.035 316L-4TB7-9 7/16 1.23 (31.2) 5100 (351)
3/8 0.035 316L-6TB7-9 7/16 1.20 (30.5) 3300 (227)
0.75 (19.0)
L 1/2 0.049 316L-8TB7-9 11/16 1.34 (34.0) 3700 (254)
3/4 0.049 316L-12TB7-9 15/16 1.46 (37.1) 2400 (165)
Dimensions, mm (in.) bar (psig)
6 1.0 316L-6MTB7-9 7/16 31.2 (1.23) 420 (6095)
8 1.0 316L-8MTB7-9 7/16 31.2 (1.23) 310 (4499)
10 1.0 316L-10MTB7-9 19.0 (0.75) 11/16 34.0 (1.34) 240 (3483)
12 1.0 316L-12MTB7-9 11/16 34.0 (1.34) 200 (2902)
18 1.5 316L-18MTB7-9 15/16 37.6 (1.48) 200 (2902)
Weld FittingsUltrahigh-Purity, Specially Cleaned, and Industrial 7
FITTINGS
WELD
1/4 316L-8TB7-6-4 3700 (254)
1/2 0.049 0.035
3/8 316L-8TB7-6-6 1.50 0.75 3300 (227)
3/4 0.049 1/2 0.049 316L-12TB7-6-8 (38.1) (19.0) 2400 (165)
1/2 316L-16TB7-6-8
1 0.065 0.049 2400 (165)
3/4 316L-16TB7-6-12
Dimensions, mm (in.) bar (psig)
6 316L-10MTB7-6-6M
10 1.0 1.0 240 (3483)
8 316L-10MTB7-6-8M
6 316L-12MTB7-6-6M
38.1 19.0
12 1.0 8 1.0 316L-12MTB7-6-8M 200 (2902)
(1.50) (0.75)
10 316L-12MTB7-6-10M
6 316L-18MTB7-6-6M
18 1.5 1.0 200 (2902)
12 316L-18MTB7-6-12M
Union Tee
Dimensions
Tube Wall Ordering Pressure
OD Thickness Number A B F, in. L Rating
A
L Dimensions, in. (mm) psig (bar)
F flat B
1/4 0.035 316L-4TB7-3 2.46 (62.5) 7/16 1.23 (31.2) 5100 (351)
3/8 0.035 316L-6TB7-3 2.40 (61.0) 0.75 7/16 1.20 (30.5) 3300 (227)
1/2 0.049 316L-8TB7-3 2.68 (68.1) (19.0) 11/16 1.34 (34.0) 3700 (254)
L
3/4 0.049 316L-12TB7-3 2.91 (73.9) 15/16 1.46 (37.1) 2400 (165)
Dimensions, mm (in.) bar (psig)
6 1.0 316L-6MTB7-3 62.5 (2.46) 7/16 31.2 (1.23) 420 (6095)
8 1.0 316L-8MTB7-3 62.5 (2.46) 7/16 31.2 (1.23) 310 (4499)
19.0
10 1.0 316L-10MTB7-3 67.8 (2.67) 11/16 34.0 (1.34) 240 (3483)
(0.75)
12 1.0 316L-12MTB7-3 67.8 (2.67) 11/16 34.0 (1.34) 200 (2902)
18 1.5 316L-18MTB7-3 74.9 (2.95) 15/16 37.6 (1.48) 200 (2902)
8 Weld, VCR, VCO, Pipe, and Vacuum Fittings
1.34 3700
1/4 316L-8TB7-3-8-4
L1 2.67 1.34 (34.0) (254)
1/2 0.049 11/16
(67.8) 0.75 (34.0)
1.35 3300
B 3/8 0.035 316L-8TB7-3-8-6
(19.0) (34.3) (227)
1.48
3/8 316L-12TB7-3-12-6
2.91 1.46 (37.6) 2400
3/4 0.049 15/16
(73.9) (37.1)
1.48 (165)
1/4 316L-12TB7-3-12-4
(37.6)
Dimensions, mm (in.) bar (psig)
62.2 310
8 6 316L-8MTB7-3-8M-6M 7/16 31.3 (1.23)
(2.45) (4499)
240
6 316L-10MTB7-3-10M-6M
67.8 (3483)
10 11/16 34.0 (1.34)
(2.67) 19.0 200
1.0 8 1.0 316L-10MTB7-3-10M-8M
(0.75) (2902)
6 316L-12MTB7-3-12M-6M
67.8 200
12 11/16 34.0 (1.34)
(2.67) (2902)
8 316L-12MTB7-3-12M-8M
Union Cross
Dimensions
Tube Wall Ordering Pressure
A OD Thickness Number A B F, in. L Rating
L
Dimensions, in. (mm) psig (bar)
1/4 0.035 316L-4TB7-4 2.45 (62.2) 0.75 (19.0) 7/16 1.23 (31.2) 5100 (351)
F flat
B 3/8 0.035 316L-6TB7-4 2.39 (60.7) 0.75 (19.0) 7/16 1.20 (30.5) 3300 (227)
1/2 0.049 316L-8TB7-4 2.61 (66.3) 0.75 (19.0) 11/16 1.31 (33.2) 3700 (254)
Dimensions, mm (in.) bar (psig)
L 6 316L-6MTB7-4 62.2 (2.45) 7/16 31.3 (1.23) 420 (6095)
8 316L-8MTB7-4 62.2 (2.45) 7/16 31.3 (1.23) 310 (4499)
1.0 19.0 (0.75)
10 316L-10MTB7-4 64.8 (2.55) 5/8 32.4 (1.28) 240 (3483)
12 316L-12MTB7-4 64.8 (2.55) 5/8 32.4 (1.28) 200 (2902)
E Tx 0.42 0.54
1/2 316L-8-ATW-R
(10.7) (13.7)
N
M typical
Weld FittingsUltrahigh-Purity, Specially Cleaned, and Industrial 9
FITTINGS
automatic tube butt weld fittings cleaned in accordance
WELD
with Swagelok Special Cleaning and Packaging (SC-11) (0.25m)Ra. Controlled
(MS0663); Photovoltaic Process Specification (SC06) surface finish is available
(MS0664); or Ultrahigh-Purity Process Specification (SC- for ultrahigh-purity
01) (MS-06-61). systems. Integral filler ring aids in alignment.
Locator Union
Dimensions
Tube Wall Ordering Pressure
A OD Thickness Number A B D F Tx Rating
B Dimensions, in. (mm) psig (bar)
D
1.69 0.02 0.36 0.29 5100
Tx 1/4 0.035 316L-4-ATW-6L
(42.9) (0.51) (9.1) (7.4) (351)
1.71 0.75 0.03 0.42 0.41 3300
F 3/8 0.035 316L-6-ATW-6L
(43.4) (19.0) (0.76) (10.7) (10.4) (227)
1.73 0.04 0.60 0.55 3700
1/2 0.049 316L-8-ATW-6L
(43.9) (1.0) (15.2) (14.0) (254)
Union
Dimensions
Tube Wall Ordering Pressure
D
A OD Thickness Number A D Tx Rating
Tx
Dimensions, in. (mm) psig (bar)
1/4 0.035 316L-4-ATW-6 1.00 (25.4) 0.02 (0.51) 0.29 (7.4) 5100 (351)
3/8 0.035 316L-6-ATW-6 1.00 (25.4) 0.03 (0.76) 0.41 (10.4) 3300 (227)
1/2 0.049 316L-8-ATW-6 1.00 (25.4) 0.04 (1.0) 0.55 (14.0) 3700 (254)
3/4 0.049 316L-12-ATW-6 1.00 (25.4) 0.04 (1.0) 0.80 (20.3) 2400 (165)
1 0.065 316L-16-ATW-6 1.25 (31.8) 0.04 (1.0) 1.06 (26.9) 2400 (165)
Dimensions, mm (in.) bar (psig)
6 1.0 316L-6-MATW-6 0.51 (0.02) 6.9 (0.27) 420 (6095)
8 1.0 316L-8-MATW-6 0.76 (0.03) 8.9 (0.35) 310 (4499)
10 1.0 316L-10-MATW-6 31.8 (1.25) 0.76 (0.03) 10.9 (0.43) 240 (3483)
12 1.0 316L-12-MATW-6 1.0 (0.04) 13.2 (0.52) 200 (2902)
18 1.5 316L-18-MATW-6 1.0 (0.04) 19.3 (0.76) 200 (2902)
Reducing Union
Dimensions
Tube Wall Tube Wall Ordering Pressure
A OD Thickness OD Thickness Number A B D D1 Tx Tx1 Rating
D B D1 Dimensions, in. (mm) psig (bar)
1.58 0.75 0.03 0.02 0.41 0.29 3300
Tx Tx1 3/8 0.035 1/4 0.035 316L-6-ATW-6-4
(40.1) (19.0) (0.76) (0.51) (10.4) (7.4) (227)
0.02 0.29 3700
1/4 316L-8-ATW-6-4
1.58 0.75 0.04 (0.51) 0.55 (7.4) (254)
1/2 0.049 0.035
(40.1) (19.0)
(1.0) 0.03 (14.0) 0.41 3300
3/8 316L-8-ATW-6-6
(0.76) (10.4) (227)
1.62 0.75 0.04 0.04 0.80 0.55 2400
3/4 0.049 1/2 0.049 316L-12-ATW-6-8
(41.1) (19.0) (1.0) (1.0) (20.3) (14.0) (165)
Dimensions, mm (in.) bar (psig)
39.9 0.76 0.51 8.9 6.8 310
8 6 316L-8-MATW-6-6M
(1.57) (0.03) (0.02) (0.35) (0.27) (4499)
40.1 19.0 0.51 6.8
1.0 6 1.0 316L-12-MATW-6-6M
(1.58) (0.75) 1.0 (0.02) 13.2 (0.27) 200
12
40.4 (0.04) 0.76 (0.52) 8.9 (2902)
8 316L-12-MATW-6-8M
(1.59) (0.03) (0.35)
10 Weld, VCR, VCO, Pipe, and Vacuum Fittings
90 Union Elbow
Dimensions
Tube Wall Ordering Pressure
L OD Thickness Number B D F, in. L Tx Rating
D B
F flat Dimensions, in. (mm) psig (bar)
0.75 0.02 1.25 0.29 5100
Tx 1/4 0.035 316L-4-ATW-9 7/16
(19.0) (0.51) (31.8) (7.4) (351)
0.75 0.03 1.23 0.41 3300
3/8 0.035 316L-6-ATW-9 7/16
L (19.0) (0.76) (31.2) (10.4) (227)
0.75 0.04 1.38 0.55 3700
1/2 0.049 316L-8-ATW-9 11/16
(19.0) (1.0) (35.1) (14.0) (254)
0.75 0.04 1.50 0.80 2400
3/4 0.049 316L-12-ATW-9 15/16
(19.0) (1.0) (38.1) (20.3) (165)
0.96 0.04 1.89 1.06 2400
1 0.065 316L-16-ATW-9 1 1/4
(24.4) (1.0) (48.0) (26.9) (165)
Dimensions, mm (in.) bar (psig)
0.51 31.8 6.9 351
6 1.0 316L-6-MATW-9 7/16
(0.02) (1.25) (0.27) (5100)
0.76 32.0 8.9 227
8 1.0 316L-8-MATW-9 7/16
(0.03) (1.26) (0.35) (3300)
19.0 0.76 34.8 10.9 254
10 1.0 316L-10-MATW-9 11/16
(0.75) (0.03) (1.37) (0.43) (3700)
1.0 35.1 13.2 199
12 1.0 316L-12-MATW-9 11/16
(0.04) (1.38) (0.52) (2888)
1.0 38.6 19.3 206
18 1.5 316L-18-MATW-9 15/16
(0.04) (1.52 (0.76 (2989
Union Tee
Dimensions
Tube Wall Ordering Pressure
A OD Thickness Number A B D F, in. L Tx Rating
L
F flat B D Dimensions, in. (mm) psig (bar)
Tx 2.50 0.75 0.02 1.25 0.29 5100
1/4 0.035 316L-4-ATW-3 7/16
(63.5) (19.0) (0.51) (31.8) (7.4) (351)
2.46 0.75 0.03 1.23 0.41 3300
3/8 0.035 316L-6-ATW-3 7/16
L (62.5) (19.0) (0.76) (31.2) (10.4) (227)
2.76 0.75 0.04 1.38 0.55 3500
1/2 0.049 316L-8-ATW-3 11/16
(70.1) (19.0) (1.0) (35.1) (14.0) (241)
3.00 0.75 0.04 1.50 0.80 2400
3/4 0.049 316L-12-ATW-3 15/16
(76.2) (19.0) (1.0) (38.1) (20.3) (165)
3.78 0.96 0.04 1.89 1.06 2400
1 0.065 316L-16-ATW-3 1 1/4
(96.0) (24.4) (1.0) (48.0) (26.9) (165)
Dimensions, mm (in.) bar (psig)
63.5 0.51 31.8 6.9 454
6 1.0 316L-6-MATW-3 7/16
(2.50) (0.02) (1.25) (0.27) (6589)
64.0 0.76 32.0 8.9 323
8 1.0 316L-8-MATW-3 7/16
(2.52) (0.03) (1.26) (0.35) (4687)
69.6 19.0 0.76 34.8 10.9 254
10 1.0 316L-10-MATW-3 11/16
(2.74) (0.75) (0.03) (1.37) (0.43) (3686)
70.1 1.0 35.1 13.2 206
12 1.0 316L-12-MATW-3 11/16
(2.76) (0.04) (1.38) (0.52) (2989)
77.2 1.0 38.6 19.3 206
18 1.5 316L-18-MATW-3 15/16
(3.04) (0.04) (1.52) (0.76) (2989)
Weld FittingsUltrahigh-Purity, Specially Cleaned, and Industrial 11
Tx
FITTINGS
WELD
K
B
Tx1
D1
Dimensions
Tube Wall Tube Wall Ordering Pressure
OD Thickness OD Thickness Number A B D D1 F, in. K L Tx Tx1 Rating
Dimensions, in. (mm) psig (bar)
2.46 0.03 0.02 1.25 1.23 0.41 0.29 3300
3/8 0.035 1/4 0.035 316L-6-ATW-3-6-4 7/16
(62.5) (0.76) (0.51) (31.8) (31.2) (10.4) (7.4) (227)
0.02 1.38 0.29 3700
1/4 0.035 316L-8-ATW-3-8-4
2.76 0.04 (0.51) (35.1) 1.38 0.55 (7.4) (254)
1/2 0.049 11/16
(70.1) 0.75 (1.0) 0.03 1.37 (35.1) (14.0) 0.41 3300
3/8 0.035 316L-8-ATW-3-8-6
(19.0) (0.76) (34.8) (10.4) (227)
0.03 0.41
3/8 0.035 316L-12-ATW-3-12-6
3.00 0.04 (0.76) 1.50 1.50 0.80 (10.4) 2400
3/4 0.049 15/16
(76.2) (1.0) 0.04 (38.1) (38.1) (20.3) 0.55 (165)
1/2 0.049 316L-12-ATW-3-12-8
(1.0) (14.0)
Dimensions, mm (in.) bar (psig)
70.1 19.0 34.5 35.1 13.2 6.9 200
12 1.0 6 1.0 316L-12-MATW-3-12M6M 0.51 (0.02) 11/16
(2.76) (0.75) (1.36) (1.38) (0.52) (0.27) (2902)
Manifold Tee
Dimensions
Tube Wall Ordering Pressure
A OD Thickness Number A B D F K L Tx Rating
L K Dimensions, in. (mm) psig (bar)
D B F B
2.48 0.02 1.23 1.25 0.29 5100
1/4 0.035 316L-4-ATW-3-4TB7-4A 7/16
(63.0) (0.51) (31.2) (31.8) (7.4) (351)
2.43 0.75 0.03 1.20 1.23 0.41 3300
3/8 0.035 316L-6-ATW-3-6TB7-6A 11/16
(61.7) (19.0) (0.76) (30.5) (31.2) (10.4) (227)
L
2.72 0.04 1.34 1.38 0.55 3700
1/2 0.049 316L-8-ATW-3-8TB7-8A 11/16
(69.1) (1.0) (34.0) (35.1) (14.0) (254)
Tx
Reducing Tee A
L
F flat B D
Tx
K
B
Dimensions
Tube Wall Tube Wall Ordering Pressure
OD Thickness OD Thickness Number A B D F K L Tx Rating
Dimensions, in. (mm) psig (bar)
2.46 0.03 1.23 1.23 0.41 3300
3/8 0.035 1/4 316L-6-ATW-3-6A-4TB7 7/16
(62.5) (0.76) (31.2) (31.2) (10.4) (227)
0.75 1.36 3700
1/4 0.035 316L-8-ATW-3-8A-4TB7
2.76 (19.0) 0.04 (34.5) 1.38 0.55 (254)
1/2 0.049 11/16
(70.1) (1.0) 1.35 (35.1) (14.0) 3300
3/8 316L-8-ATW-3-8A-6TB7
(34.3) (227)
12 Weld, VCR, VCO, Pipe, and Vacuum Fittings
Union
Dimensions
Tube Ordering Pressure
A OD Number A D E Tx Rating
Dimensions, in. (mm) psig (bar)
E Tx
1/4 316L-4-ASW-6 0.28 (7.1) 0.19 (4.8) 0.38 (9.7) 6800 (468)
D 3/8 316L-6-ASW-6 1.00 0.31 (7.9) 0.28 (7.1) 0.50 (12.7) 4900 (337)
1/2 316L-8-ASW-6 (25.4) 0.38 (9.7) 0.41 (10.4) 0.63 (16.0) 3800 (261)
3/4 316L-12-ASW-6 0.44 (11.2) 0.63 (16.0) 0.88 (22.4) 2700 (186)
Union Tee
Dimensions
Tube Ordering Pressure
OD Number A B D E F L Tx Rating
A
L Dimensions, in. (mm) psig (bar)
B F flat
2.46 0.28 0.19 1.23 0.38 6800
Tx E 1/4 316L-4-ASW-3 7/16
(62.5) (7.1) (4.8) (31.2) (9.7) (468)
D 2.68 0.31 0.28 1.34 0.50 4900
3/8 316L-6-ASW-3 11/16
(68.1) 0.75 (7.9) (7.1) (34.0) (12.7) (337)
L
2.68 (19.0) 0.38 0.41 1.34 0.63 3800
1/2 316L-8-ASW-3 11/16
(68.1) (9.7) (10.4) (34.0) (16.0) (261)
2.94 0.44 0.63 1.47 0.88 2700
3/4 316L-12-ASW-3 15/16
(74.7) (11.2) (16.0) (37.3) (22.4) (186)
Weld FittingsUltrahigh-Purity, Specially Cleaned, and Industrial 13
FITTINGS
WELD
with Swagelok Special Cleaning and Packaging (SC-11)
(MS0663). Precise machining of socket
ensures proper tube fit.
Union Tube
Dimensions
D D Socket Ordering Pressure
Size Number A D E Tx Rating
Tx E Dimensions, in. (mm) psig (bar)
1/4 SS-4-TSW-6 0.75 (19.0) 0.28 (7.1) 0.19 (4.8) 0.48 (12.2) 10 700 (737)
A 3/8 SS-6-TSW-6 0.88 (22.4) 0.31 (7.9) 0.28 (7.1) 0.60 (15.2) 8 100 (558)
1/2 SS-8-TSW-6 1.06 (26.9) 0.38 (9.7) 0.41 (10.4) 0.73 (18.5) 6 600 (454)
3/4 SS-12-TSW-6 1.31 (33.3) 0.44 (11.2) 0.63 (16.0) 1.04 (26.4) 5 900 (406)
1 SS-16-TSW-6 1.44 (36.6) 0.62 (15.7) 0.88 (22.4) 1.36 (34.5) 5 600 (385)
3/8 SS-6-TSW-9 0.31 (7.9) 0.28 (7.1) 1/2 1.04 (26.4) 0.64 (16.3) 8 100 (558)
D L
1/2 SS-8-TSW-9 0.38 (9.7) 0.41 (10.4) 11/16 1.17 (29.7) 0.81 (20.6) 6 600 (454)
D
3/4 SS-12-TSW-9 0.44 (11.2) 0.63 (16.0) 1 1.56 (39.6) 1.12 (28.4) 5 900 (406)
1 SS-16-TSW-9 0.62 (15.7) 0.88 (22.4) 1 1/4 1.92 (48.8) 1.44 (36.6) 5 600 (385)
FITTINGS
WELD
(43.7) (7.1) (4.8) (21.8) (13.5) (737)
Tx E 2.08 0.31 0.28 1.04 0.64 8 100
3/8 SS-6-TSW-4 1/2
(52.8) (7.9) (7.1) (26.4) (16.3) (558)
D 2.34 0.38 0.41 1.17 0.81 6 600
1/2 SS-8-TSW-4 11/16
(59.4) (9.7) (10.4) (29.7) (20.6) (454)
3.12 0.44 0.63 1.56 1.20 5 900
A 3/4 SS-12-TSW-4 1
(79.2) (11.2) (16.0) (39.6) (30.5) (406)
3.84 0.62 0.88 1.92 1.45 5 600
1 SS-16-TSW-4 1 1/4
(97.5) (15.7) (22.4) (48.8) (36.8) (385)
Swagelok Orbital
Welding System
See the Swagelok Welding
System M200 Power Supply
catalog (MS02342) for more
information.