Robbins 123RH C
Technical specification
Designed for large diameter and long hole raise boring applications, the
Robbins 123RH is a very powerful raise drill. The 123RH is designed for large
diameter raises, ranging from 3.1 m up to 6.0 m (10-20 ft.), making it the
preferred choice for sinking shafts in mining applications or in civil
engineering applications.
Features
Control system Derrick
The Robbins raise drills apply the well established and The hydraulic drive features variable speed and good torque
proven Atlas Copco Rig Control System(RCS) which adds limiting control. The well proven RCS system adds relia-
reliability and user friendliness bility and user friendliness.
The components of the RCS are common and inter- A gearbox incorporated in a barrel allows the drive train to
changeable be disassembled into smaller components without losing
The drill rig computer technology improves the drilling ac- the preload of the main bearings. This saves time during
curacy, equipment reliability and serviceability maintenance & transportation.
Integrated diagnostics and event logging system to assist in A simple in-line drive system provides balanced thrust loads
equipment maintenance to improve cutting action.
The system prevents human errors by built in interlocks A sliding fork worktable wrench in combination with the
Standard functions include anti-jamming, auto makeup and semi-automatic drivehead wrench eliminates the need to
gradual ramp up of power at the start of pilot drilling and handle heavy wrenches.
reaming Rigid crosshead guide columns provide efficient torque
Trolley mounted operator panel with full-color display reaction extending the service life of the thrust cylinders.
Drive system
Hydraulic drive with variable speed and excellent torque
limiting control.
Dual hydraulic pumps for high machine availability.
Robbins 123RH C
Specifications
Motor Thrust system
Two hydraulic motors connected in series Power......................................................75/85 kW at 50/60 Hz
Radial-piston type with a rotating cylinder hollow shaft, Oil reservoir .......................................................580 l (153 gal)
stationary housing Oil filtration .............................................................10 microns
Hydrostatic system Mineral hydraulic oil grade ...................................................68
Drivehead Both power packs come with Off-line filtration system, electrical
- Semi-automatic wrench fill / drain pump and 10m hoses. They are water cooled and
Worktable prepared for external closed loop cooling system
- Hydraulic horse shoe wrench
Control system
Electrical system
Advanced radio remote control
Standard protection ground fault, over/under voltage 15m cable to op-panel
Phase fault and emergency stop Length sensor for auto shut down
Thermal overload protection for electrical motors Angle indication system
Anti-condensation heaters in electrical cabinet Auto make up log
Power management
Built in heaters in the electrical motors
Auto makeup log
Drive motor started by star/delta Net force control
Direct start of thrust motor Bailing pressure supervision
Power management. If there are power limits on site, this Reamer drop detection system when using catch rope
feature monitor the power outtake of the machine and limits it
to a preset value
Auxiliary outlet ..........................................115 V/230 V (16A)
Main breaker with overload and short circuit protection
Robbins 123 RH C
Width pipeloader included 3 800 mm 150 Weigh** 7 100 kg 15 650 lbs Weight 2 800 kg 6 173 lbs
DERRICK
H
H H
W D W L W L
Optional equipment
Derrick Operating equipment
Electrical driven lubrication pump motor Bit breaker box 15
Extra-long turnbuckles for drilling angles below 60 Starter bushing
degrees Blooie system provides a controlled exit for return
bailing fluid and cuttings during pilot hole drilling
Float valve
Control System
Measure While Drilling (MWD) Tools
Bailing pump control and power outlet (37kW)
20 or 30 meter cable to OP-panel Floatbox installation tool
Rig Remote Access (RRA) Makeup and breakout tool (MBT)
Transporters
Diesel crawler
Sled assembly
Robbins 123RH C
Operation data
DERRICK 123RH C
Nominal 5.0 m 16 ft
Raise diameter
Range 3.1-6.0 m 10-20 ft
Copyright 2012, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may
Maximum 1 100 m 3 600 ft
show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
Maximum Reaming 540 kNm 398 000 ft-lbs
torque Break out 700 kNm 516300 ft-lbs
Reaming thrust Operating maximum 8 923 kN (at 330 Bar) 2 000 000 lbs (at 4 800 psi)
Stroke 2 160 mm 85