Anda di halaman 1dari 29

ANSYS ICEM CFD / AI*Environment v.

11
část 1/4

SVS FEM s.r.o.


Škrochova 42 Brno
info@svsfem.cz
Školící materiály fy. SVS FEM s.r.o.

© 2004-2007 SVS FEM s.r.o.


Všechna práva vyhrazena.

Školící materiály, včetně všech částí a příloh jsou chráněny autorskými právy.
Jakékoliv jejich užití mimo rámec autorských práv, je vázáno na souhlas fy. SVS
FEM s.r.o. To platí především o kopírování, překladech, mikrofiších a zpracování
elektronickými systémy.

Strana 2
ANSYS ICEM CFD / AI*Environment v.11
CAD Import and Functions
Geometry in AI*Environment

• AI*Environment has 2 primary means of obtaining geometry:


– CAD model import, including a design modeler in Workbench
– Geometry creation
• Imported solids are converted to surfaces
– A “Body” within AI*E is simply a closed set of surfaces.

• It is possible to create
complicated geometries,
but most users import
from CAD

This Jet engine model


with functioning thrust
reversers was built with
AI*Environments
geometry tools

Strana 4
Wide CAD Support
• Direct CAD interfaces/Geometry import • 3rd Party Cad
- Parametric meshing – STEP/IGES
– ACIS
– Parasolid
– DWG/DXF
– IDI
– GEMS
SolidWorks
• Faceted Data
– STL
Pro/Engineer – VRML
– NASTRAN,
PATRAN,
ANSYS, LS-
Unigraphics DYNA
I-DEAS • Formatted Point
Data
• Catia V5
Integration

CATIA
Solid Edge
Strana 5
Persistence

Link to active CAD Geometry


Mesh When a model is changed in Pro/E, or by
parameters set the Design Modeler, the model can be
up in ANSYS updated in ANSYS ICEM CFD
ICEM CFD

Parametric
changes in
Pro/E

Advanced mesher setup, including


Part names, mesh parameters,
Update
boundary conditions, etc are tied Geometry in
directly to entity names. ANSYS ICEM
These are persistent from one CFD
design change to the next
Strana 6
CATIA V5 Based technology

Geometry Model in Catia V5

– Associative with CATIA-V5 model,


mesh responds to parametric change
in CATIA
– Created mesh can be used with all
Catia-V5 based applications
– Same tool for CFD and Structural
analysis
– CFD Gateway
Strana 7
ANSYS ICEM-CFD/AI*Enviroment v.11
Workbench Integration
11.0 Workbench integration

• Advanced Meshing in Simulation


• GTM file for CFX Pre on Project Page
• Improved Project Page Handling
• Commonized CAD licensing
CF
S YS X
AN
Represents integration CFX
of tool in Workbench Workbench

ICEM CFD
Represents communication
directly between products

Strana 9
11.0 Workbench Meshing

Workbench Meshing
• Framework for providing
common meshing tools for
any application inside
Workbench
• ICEM CFD uniform quad/tri
meshing technology is now
exposed natively in Simulation

Strana 10
Workbench Geometry Handling

Direct CAD 3rd Party CAD Faceted Data


CATIA, Pro/E, I-DEAS, STL, Nastran,
IGES, ACIS, DWG, STEP… Patran, VRML…
UG, SolidWorks…

ICEM CFD
ANSYS Workbench

As always, you
can import Advanced
geometry Meshing Tab
directly into
ICEM CFD

External Solver

Strana 11
Workbench Geometry Handling

Direct CAD 3rd Party CAD Faceted Data


CATIA, Pro/E, I-DEAS, STL, Nastran,
STEP, Parasolid Patran, VRML…
UG, SolidWorks…

Geometry ICEM CFD


ANSYS Workbench

Engine
Advanced
Or use the Meshing Tab
Workbench CAD
connection
Products

External Solver

Strana 12
Workbench Geometry Handling

Direct CAD 3rd Party CAD Faceted Data


CATIA, Pro/E, I-DEAS, STL, Nastran,
STEP, Parasolid Patran, VRML…
UG, SolidWorks…

Geometry ICEM CFD


ANSYS Workbench

Engine Advanced Meshing Tab

The same Mesher


interfaces for
all ANSYS Design
products Simulation

• Common CAD connection licenses


– 1 Connection product per CAD system for all ANSYS Products
– Direct to ANSYS ICEM CFD or thru Workbench

Strana 13
Workbench Geometry Handling

Direct CAD 3rd Party CAD Faceted Data


CATIA, Pro/E, I-DEAS, STL, Nastran,
STEP, Parasolid Patran, VRML…
UG, SolidWorks…

Geometry ICEM CFD


ANSYS Workbench

Engine Advanced Meshing Tab

Mesher
Design
Modeler Design
Simulation

• Use design modeler to repair/simplify CAD


• Bi-directional parametric link to CAD
Strana 14
ANSYS ICEM CFD / AI*Environment v.11
Geometry
Model Diagnosis and Repair

Build topology function


• Curves are extracted from surface model
• Enables model diagnosis
• Curves form basis for
geometry repair

Imported CAD

Strana 16
Geometry Merging

• Automatic merging of multiple CAD parts into a single


model
– Hybrid Approach
• Direct CAD
• Translated CAD
• Faceted Data

Strana 17
Geometry Repair
–Automated tools for:
• Evaluating CAD integrity
• Extracting surface topology (curves,
points, etc.)
• Repair of gaps, closing of edges
• Simplifying data

Strana 18
Geometry Handling

Repair
Body definitions •Build Diagnostic
• From connectivity Topology
Point creation • Material Point •Close Hole
•From screen •Remove Hole
•Explicit •Surface
•Offset retrimming/matching
•Center-point
Surface editing •Surface extension
Curve creation •Surface from curves •Curtain surface
•Between points •Un-trim surface
•From points •Driven surface
•Endpoints •Surface trimming •Split by curvature
•Arc/Circle •Swept surface
•Intersection •Merged surface •Modify surface
•Surface param •Revolved surface normals
•Along curve •Shrink wrapped
•Intersection •Offset surface •Bolt hole detection
•Projection to surface
•Surface projection •Midsurface •Button detection
curve
•Segmentation •Adjust thickness •Standard Shapes •Fillet detection
•Projection to surface
•Concatenation •Lofted surface
•Surface Boundary
•Modify curve tools

Strana 19
Geometry Handling

• Feature detection
– Hole detection/removal
– Button detection
– Fillet detection
• Geometry repair Example:
auto-detect buttons
– Surface reapproximation
– Surface untrimming

Strana 20
Geometry Handling

• Match edges
– Automatic
– User definition
– One command

• Close holes
• Remove holes
• Modify Surface normal
• Model diagnostic

Strana 21
Midsurface

Strana 22
Midsurface/Seam Welding

• Semi-Automatic Tool to close gaps after midsurfacing


• Preview/Edit automatic extensions
• New methodology extends surfaces for robust welding

Strana 23
Geometry Handling

Faceted Tools

Transform Geometry
•Translate
•Rotate
•Mirror
•Scale
•Translate & Rotate
Faceted Curves Faceted Surfaces •Three Points
•Convert from B-spline •Convert from B-spline •Curve to Curve
•Create Triangles
•Create Curve •Coarsen surface •Delete Triangles
•Move Nodes •Create surface
•Merge Nodes •Split Triangles
•Merge Edges
•Create Segment •Split Edges •Restrict Triangles
•Delete Segment •Swap Edges •Move to new/existing Part
•Split Segment •Move Nodes •Merge Surfaces
•Restrict Segments •Merge Nodes
•Move to new/existing Part

Strana 24
Faceted Geometry

• Faceted tools
– Easier to access
– Powerful tools for improving Scan data
• Eg. Unusable model with 1500k poor
triangles, holes, overlaps, etc. to 400k
meshable model

Strana 25
ANSYS ICEM-CFD/AI*Enviroment v.11
Shrink Wrapping
The Demo Model

The Stats
3.7 million line Nastran File
1000+ parts
Estimated at 800000 CAD surfaces
Internal CAD also

If 1 surface uses 5k of RAM then ‘true CAD model’ = 4 Gigs to load the part!

Strana 27
The Demo Model

Automatically Shrink Wraped


• No Shadowing effects
• Final Shrink wrap can be used as
simplified geometry
• Try with the Hexa Core technology

Strana 28
The Demo Model

• Respects surface sizing info


• Mesh that is generated can be used as surface
mesh
– High quality

Strana 29

Anda mungkin juga menyukai