Anda di halaman 1dari 3

G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 1 de 3

Shutdown SIS

Previous Screen

Product: GENERATOR SET


Model: G3412 GENERATOR SET KAP
Configuration: G3412 Generator Set KAP00001-UP

Specifications
G3406 and G3412 Generator Set Engines
Media Number -RENR5952-05 Publication Date -01/08/2010 Date Updated -23/08/2010

i04002903

Cylinder Head Valves


SMCS - 1105

S/N - KAP1-153

Note: Refer to Reuse And Salvage Guidelines, SEBF8002, "Valves, Valve Springs, Valve
Rotocoils, and Locks" and refer to Reuse And Salvage Guidelines, SEBF8034, "Valve and Valve
Spring Specifications" for the procedure and specifications in order to check used valves and valve
springs.

https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017
G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 2 de 3

Illustration 1 g01405439

(1) 4N-5906 Spring

Length under test force ... 54.99 mm (2.165 inch)


Test force ... 344 ± 34 N (77 ± 8 lb)
Free length after test ... 62.74 mm (2.470 inch)
Outside diameter ... 31.75 mm (1.250 inch)

(A) Height to top of valve guide ... 32.30 ± 0.80 mm (1.272 ± 0.031 inch)

Note: Apply clean engine oil to the valve stems prior to installation in the cylinder head.

(B) Diameter of new valve stem

Inlet valve ... 9.441 ± 0.008 mm (0.3717 ± 0.0003 inch)


Exhaust valve ... 9.441 ± 0.010 mm (0.3717 ± 0.0004 inch)

(C) Diameter of valve head

https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017
G3412 Generator Set KAP00001-UP(SEBP3444 - 37) - Systems & Components Página 3 de 3

Inlet valve ... 44.98 ± 0.13 mm (1.771 ± 0.005 inch)


Exhaust valve ... 41.81 ± 0.13 mm (1.646 ± 0.005 inch)

(D) Angle of valve face ... 19.25 ± 0.25 degrees

Illustration 2 g01405441

Note: The temperature of the valve seats for installation into the bores in the bottom of the
cylinder head is −62 °C (−80 °F).

(E) Bore in cylinder head for valve seat

Inlet valve seat ... 45.949 ± 0.025 mm (1.8090 ± 0.0010 inch)


Exhaust valve seat ... 42.774 ± 0.025 mm (1.6840 ± 0.0010 inch)

Note: The valve seats do not require machining after installation.

(F) Angle of face of valve seat

Inlet valve seat ... 20.25 ± 0.50 degrees


Exhaust valve seat ... 20.25 ± 0.25 degrees

(G) Depth of bore in cylinder head for new valve seat ... 11.48 ± 0.10 mm (0.452 ± 0.004 inch)

(H) Outside diameter of the face of the valve seat

Inlet valve seat ... 42.926 mm (1.6900 inch)


Exhaust valve seat ... 38.6 mm (1.52 inch)

Copyright 1993 - 2017 Caterpillar Inc. Wed Dec 20 13:22:18 UTC-0400 2017
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1:444/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 20/12/2017

Anda mungkin juga menyukai