Item Description
A MLFB model number
B Ratings label
C Programming port
LED Description
L1 Relay self-health indicator
L2 Recloser is OPEN
L3 Recloser is CLOSED
L4 Recloser is LOCKED OUT
L1
L5 Fault has occurred
L2 L6 Ground fault has occurred
L7 Recloser is active
L3
L8 Hot line tag active
L4 L9 Ground fault protection off
L10 Reclose sequence in process
L5
L6
L7
L8
C L9
L10
Item Description
In CT secondary current (1 A for recloser)
Fn 50 Hz/60 Hz (user defined)
Press enter. If LCD screen does not say “ENTER to CONTROL”, press the Cancel button until it
does. This will not cause the recloser to operate.
Communication Meters
Notes:
Miscellaneous Meters
For all arrows pointing ,
To select,
System Config Establish system parameters, recloser name, active settings group, viewing/editing settings group and other parameters.
Settings
CT/VT Config Establish current transformer (CT) and voltage transformer.(VT) parameters. mode
Function Config Enable functions.. detailed
Current Prot’n Phase Overcurrent 50/51 Measurement RMS
tree
51-1 thru 51-2
Autorecloser Config
Manual Close
Circuit Breaker
Quicklogic
General Alarms
LED Config
Pickup Config
Trip Config
CB Maintenance CB Counters
Output Matrix
Data Storage
Communications
01: