Sursa: http://www.stepcraft.ro/schimbator-automat-
de-scule-inclusiv-switch-box.aspx
Compania:Stepcraft
Thanks to its modular design it is possible to enlarge the automatic tool changer:
You can add up to five elements with each additional tool holder. This way, you can
realize complex job much quicker and easier.
For operating the tool changer attachment you are in need of a device to control the
compressed air of the tool changer and blow-off function
Date tehnice
- Magazina poate sustine mai multe scule aschietoare
- Carcasa confectionata din aluminiu (7075 anodizat)?
- Axul confectionat din otel cu rulemnt dublu
- Concentricitate (0.02 mm?)
- Greutate
- Forta de tensiune a arcului : kg = aprox. N
- Foloseste sistemul de prindere (SK 10 cu bucsi elastice integrate)
- Presiunea de operare: bar
- 2 conectori pentru tuburi de mm
- Diametrul de prindere de mm
- Recomandat pentru viteze de lucru de maxim rpm
- Diametrul dispozitivului: mm
Compatibil cu motoarele( STEPCRAFT HF 500 si HF 350)
Pachetul contine
1 x dispozitiv schimbare scule
1 x suport scule
2 x adaptoare (con SK10 pentru scule cu axul de prindere de ø (1/8 ")
1x Switch-Box inclusiv 1 x modul electronic pentru dispozitvul de schimbare scule
Suport:
Modele:
• Automatic Tool Length Compensation with touch probe to automatically calibrate and store tool
length offsets. This data is then stored and is automatically addressed by our motion controller. • Auto
Starting - The spindle is automatically started at the beginning of the file and turned off at the end.
• Digital Spindle Speed - Digital, programmable spindle speed gives real time feedback of the current
spindle speed. Exact spindle speeds can be entered in the files and adjusted at the keypad in real time. •
Torque Monitoring - The current draw of the spindle is displayed on the keypad during cutting. This
allows the user to monitor the cutter for wear.