Anda di halaman 1dari 2

MAGARA SCHOOL FOR PHILIPPINE CRAFSTMEN

FIRST QUARTER EXAM


GRADE 9- TVE

Name: __________________________ Score:_________________________


Year &Section:___________________ Date:_________________________

TEST I: MULTIPLE CHOICE


1. It is the heart of all electronics equipment. It converts AC input power line to DC output voltage.
a. Rectifier b. AC-DC Power Supply c. Transformer d. CPU
2. Which stage of AC-DC power supply wherein it step-up or step-down the voltage?
a. Rectifier stage b. Filter Stage c. Transformer Stage d. Regulator stage
3. Which stage of AC-DC power supply wherein you used a capacitor to produce a smooth direct current?
a. Rectifier stage b. Filter Stage c. Transformer Stage d. Regulator stage
4. Which STAGE of AC-DC power supply wherein you used four diodes arranged in a bridge circuit to give full
wave rectification?
a. Rectifier stage b. Filter Stage c. Transformer Stage d. Regulator stage
5. Which TYPE of AC-DC power supply that needs one diode only to conduct on one alteration in every cycle of
small input?
a. Full wave bridge type b. Half wave c. full wave center tapped d. AVR
6. Which TYPE of AC-DC power supply that needs a center-tapped transformer, two rectifier diodes?
a. Full wave bridge type b. Half wave c. full wave center tapped d. AVR
7. Which TYPE of AC-DC power supply that needs four rectifier diodes
a. Full wave bridge type b. Half wave c. full wave center tapped d. AVR
8. An external parts of an AC-DC power supply that contains the power switch, voltage selector switch, and the
power indicator.
a. Rear Panel b. Front Panel c. Shell case d. None of the above
9. When the second conduction occur (black line) the positive half cycle will be going to conduct to the cathode of
diode _______ and diode _________. See the illustration below. In this case what diodes are conducting?

a. D1 and D2 b. D2 & D3 c. D4 & D1 d. D1 & D3


10. When the first conduction occur (red line) the positive half cycle will be going to conduct to the cathode of diode
_______ and diode _________. See the illustration above. In this case what diodes are conducting?
a. D1 and D2 b. D2 & D3 c. D4 & D1 d. D1 & D3
11. An external parts of an AC-DC power supply that contains the fuse and the AC line cord.
a. Rear Panel b. Front Panel c. Shell case d. None of the above
12. An internal parts of AC-DC power supply that has a special type of connector used to connect the power supply
to the electronic gadget.
a. Case and cover b. Capacitor c. Alligator Clip d. diode
13. An internal part of AC-DC power supply used as a filter, to block DC signals but pass AC signals.
a. Case and cover b. Capacitor c. Alligator Clip d. diode
14. It serves as a housing of an AC-DC power supply.
a. Case and cover b. Capacitor c. Alligator Clip d. diode
15. A device which only allows current to flow only in one direction.
a. Capacitor b. Case Cover c. diode d. Fuse
16. A protective device used to prevent the circuit from damage when short circuit occur.
a. Diode b. Fuse c. line cord d. LED
17. A transducer which converts electrical energy to light.
a. Fuse b. switch c. Light emitting diode(LED) d. line Cord
18. A device used to on and off the circuit.
a. Line cord b. Switch c. resistor d. Line Cord
19. A type of cord used to connect the unit to the voltage source.
a. PCB b. line cord c. Resistor d. Rotary Switch
20. A device used to limit the flow of current.
a. PCB b. line cord c. Resistor d. Rotary Switch
21. A conductive pattern formed on one or both sides of an insulating base by etching, plating or stamping.
a. PCB b. transformer c. Resistor d. Rotary Switch
22. A switch that is operated by a rotating shaft.
a. PCB b. transformer c. Resistor d. Rotary Switch
23. A component that consist of two or more coils which are coupled together by magnetic induction
a. PCB b. transformer c. Resistor d. Rotary Switch
24. How many stages do basic power supplies have?
a. 1 b. 2 c. 3 d. 4
25. What component do we need to use in a simple filtering stage?
a. Diode b. resistor c. capacitor d. switch
26. How many diodes do full-wave center tapped power supplies have?
a. 1 b. 2 c. 3 d. 4

Test II
Directions: Fill in the blank with the names of the parts indicated in the diagram. (27-35). Write your answer on the
separate sheet of paper.

33 34 35

27

28

32 31 30 29

Test III: (10 pts each)

Directions: Draw the schematic diagram of the following circuit:


1. Half wave power supply
2. Full wave conventional

*****Good Luck and God bless*****

**MPR**

Anda mungkin juga menyukai