Anda di halaman 1dari 10

955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

Producto: TRACK LOADER


Modelo: 955L TRACK LOADER 64J
Configuración: 955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY
3304 ENGINE

Pruebas y Ajustes
955L POWER SHIFT TRANSMISSION
Número de medio -REG01508-00 Fecha de publicación -01/08/1973 Fecha de actualización -10/10/2001

Testing And Adjusting

Important Information

When testing must be done in a closed area, activate the brakes and use
blocks to prevent the machine from moving during the tests. Let only
approved personnel on the machine. Keep other personnel off the
machine and in view of the operator.

NOTE: All tests and adjustments must be made with the oil in the hydraulic control system at normal operating temperature. Be sure the linkage adjustments
are correct before making any tests.

1 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

HYDRAULIC CONTROLS (NEUTRAL)

1. Magnetic strainer.

2. Oil filter.

3. Body of the pressure control valve.

4. Check valve.

5. Differential valve.

6. Oil pump.

7. Lubrication relief valve.

8. Load piston.

2 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

9. Modulating relief valve.

10. Oil reservoir.

11. Lubrication line to transmission.

12. Oil cooler.

13. Safety valve.

14. Spool for speed selection.

15. Orifice.

16. Relief valve for converter inlet.

17. Spool for direction selection.

18. Torque converter.

19. Body of the selector valve.

A. Opening to the load piston.

B. Pressure tap for the direction clutch.

C. Pressure tap for the pump.

D. Pressure tap for lubrication.

E. Pressure tap for the inlet to the torque converter.

F. Pressure tap for the speed clutch.

G. Pressure tap for the outlet from the torque converter.

Location Of The Pressure Taps And Transmission Testing

3 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

A. Opening to the load piston. B. Direction clutch. E. Inlet to the torque converter. F. Speed clutch.

C. Pump.

4 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

D. Lubrication. G. Outlet from the torque converter.

5 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

3S4299 PRESSURE CONTROL VALVE


3. Body of the pressure control valve. 4. Check valve. 5. Differential valve. 8. Load piston. 9. Modulating relief valve. 20. Spacers. A. Opening to the load piston. B. Pressure tap for the direction
clutch.

6 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

3S4298 SELECTOR CONTROL VALVE


13. Safety valve. 14. Spool for speed selection. 16. Relief valve for converter inlet. 17. Spool for direction selection. 19. Body of the selector valve. 21. Spacers.

7 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

Transmission Control Linkage And Selector Valve Adjustment

Do not make any adjustments to the linkage with the engine running.

1. Put speed selector cam (27) in the NEUTRAL (N) position. Make an adjustment to speed control rod (26) so selector lever (22) moves freely through

8 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

neutral opening (23) in the shift guide.

TRANSMISSION CONTROL LINKAGE

9 de 10 10/06/2016 11:28
955L TRAXCAVATOR 64J07632-UP (MACHINE) POWERED BY 3304 ENGINE(HEBP1113 - 00)... https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/media...

22. Selector lever. 23. Neutral opening in shift guide. 24. Directional selector cam. 25. Directional control rods. 26. Speed control rod. 27. Speed selector cam. X. Selector lever in NEUTRAL
REVERSE position. Y. Selector lever in NEUTRAL FORWARD position.

2. Put selector lever (22) in the NEUTRAL position and speed selector cam (27) in the NEUTRAL (N) position. Make an adjustment to the link in the end of
the spool for speed selection so the spool is even with the face of the selector valve body. Move selector lever (22) to all the speed positions to be sure that
speed selector cam (27) is in the correct position for each speed.

3. Put directional selector cam (24) in the FORWARD (F) position. Make an adjustment to directional control rods (25) so selector lever (22) is in the
NEUTRAL FORWARD position.

4. Put selector lever (22) in the NEUTRAL FORWARD position (Y) and directional selector cam (24) in the FORWARD (F) position. Make an adjustment to
the link in the end of the spool for directional selection so the spool is even with the face of the selector valve body. Move selector lever (22) to the
NEUTRAL REVERSE position (X). Check to be sure that directional selector cam (24) is in the REVERSE position.

Copyright 1993 - 2016 Caterpillar Inc. Fri Jun 10 2016 11:28:30 GMT+0200
Todos los derechos reservados.
Red privada para licenciados del SIS.

10 de 10 10/06/2016 11:28

Anda mungkin juga menyukai