Company:
Foundation: 2003
Headquarters: Albacete – Spain
Markets: UE, MENA, USA, LATAM
Turnover: 2M€ (est. 2017)
Activities:
Engineering & Consulting
Technology Development
Industries
CSP & Power Generation
Refineries
Petrochemicals
Gas
Water
PLANT OWNERS AND OPERATORS
CLIENTS
EPC CONTRACTORS, ENGINEERING, LICENSORS AND CONSULTANTS
CLIENTS
EQUIPMENT MANUFACTURING OIL&ENERGY
CLIENTS
EQUIPMENT MANUFACTURING other industries
CLIENTS
Experience and excellence
MSE3 (Belgium) (KANEKA Belgium NV) C-10 Refinery expansion (Spain) (RESPOL)
Alkox 6 EPCm Phase (The Netherlands) (INEOS Oxide) Cartagena Refinery delayed coking (Spain) (REPSOL)
Compression Station GR5 HRM (Algeria) (Sonatrach) Crude Oil Piping Storage Facility (Bélgica) (GELDOF)
C2 Recovery and Fractionation Plant (Iran) (Kangan Petro-Refinery Co.) Dunkerke LNG Terminal (Francia) (DUNKERQUE LNG GROUP EDF)
Oxygen Plant SIGMA-250 (Spain) (AIR LIQUIDE) G16A-B Well Protector Platform (Dutch Northsea) (FRAMES / GDZ SUEZ)
El Nasr Co. for Intermediate Chemicals (NCIC) fertilizer Complex (Egypt) INTECSA Hydrogen Production Plant – TUAPSE (Rusia) (TECHNIP / LLC ESCORT)
Clean Fuels Project (CFP) (Kuwait) (KNPC) Izmit Refinery (Turkey) (TUPRAS / TECNICAS REUNIDAS)
Beni-Saf Compressor Station (BSCS) (Algeria) (MEDGAZ) Jetty Boil-Off Gas Recovery (Qatar) (FLUOR / QATARGAS )
Touatzaz Project (Algeria) (TECNICAS REUNIDAS) Jubail Expansion Refinery Project ( Saudi Arabia) (ARAMCO)
Planta Asfaltos (Spain) (ASFALTOS ESPAÑOLES) Margarita Project – CPF Plant (Bolivia) (TECNICAS REUNIDAS / REPSOL)
Methanol Plant (Oman) (SALALAH METHANOL COMPANY) Liquefiable extraction plant – Gran Chaco (Bolivia) (YPFB)
A Coruña Refinery (Spain) (REPSOL) Puertollano Refinery (Spain) (REPSOL/DYNASOL)
Estación de Compresión Soto La Marina Tamaulipas (Mexico) ENAGAS Petromidia Refinery (Romanía) (ROMPETROL)
Harmattan Gas Plant (Canada) ALTAGAS Reconversao da Refineria de Sines (Portugal) (GALP)
San Roque Refinery (Spain) (CEPSA) Refining Project Evolution-Limbe (Cameroon) (FOSTER WHEELER / SONARA)
La Rábida Refinery (Spain) (CEPSA) Revamp Chloralkali Electrolisis Plant (Romanía) (CHIMCOMPLEX)
Francisco I. Madero Refinery (Mexico) (PEMEX) South Yoloten Gas Field Development Proj. (Turkmenistan) (PETROFAC / TURKMENGAS)
Tula Refinery, Duba Project (Mexico) (PEMEX) Sulphur Recovery Unit PJ177 Petrobrazi Refinery (Romanía) (ROMPETROL)
Amman Strategic Reserve Terminal (Jordan) (KINGDOM OF JORDAN) Ticona Kelsterbach Relocation Project (Germany) (TICONA)
BP oil Refinery (Spain) (BP OIL) Volvograd Refinery Lukoil (Rusia) (LUKOIL)
C-10 Refinery expansion (Spain) (RESPOL) Wilhelmshavener Raffineriegesellschaft (Germany) (CONOCO PHILLIPS)
YARA Project (Tailandia) (GE OIL&GAS)
Biodiesel Production Plant (Spain) (BIONOR)
REFERENCES
Experience and excellence
Power Plants
Mobarakeh Foolad (Iran) (MAPNA) Kazeroun Combined Cycle Power Plant (Iran)
Georgia Pacific, Taylorsville (USA)(SOLAR TURBINES) Kerman Combined Cycle Power Plant (Iran)
Pajaritos II Cogeneration Plant (Mexico) (CYDSA) LKPL Stage II Power Plant Project (India) (INDIRA INDUSTRIES)
ILO Power Plant (Peru) (ENERSUR / GDF SUEZ) Marcinelle CCGT Power Plant. (Belgium) (METKA)
Djelfa CCGT Power Plant (Algeria) (SONELGAZ) Neka Combined Cycle Power Plant (Iran) (MAPNA)
Vuelta de Obrigado Power Plant (Argentina) (DURO FELGUERA /GE) Power & Steam Generation Plant (Iran) (ILAM PETROCHEMICAL COMPLEX)
Chilca Plus CCGT Power Plant (Peru) (ENERSUR /GDF SUEZ) Puente Nuevo Thermal Power Plant (Spain)
Los Mina CCGT Power Plant (Dominican Republic) (AES DOMINICANA) S.C. Petromidia Power Plant (Romania) (S.C. PETROMIDIA)
Cogeneration Plant Waco VA Hospital (USA) Sodom combined cycle power plant(Israel) (NOOTER ERIKSEN)
Thema Power Plant (Ghana) UMM AL-NAR Independent Power and Water Project (CCPP) (United Arab Emirates)
Altamira Cogeneration Plant (Mexico) (CMPC ABSORMEX) Vantaa Incineration Plant (Finland) (LAB)
Cogeneration Plant (Canada) (K+S POTASH) Vasilikos Combined Cycle Power Plant (Cyprus)
Noreste CCGT Power Plant (Mexico) IBERDROLA Yazd Combined Cycle Power Plant (Iran)
Aboño Power Plant (Spain) ALSTOM
Cogeneration Plant Tioxide Scarlino (Italy) EDF
Cochrane Power Plant (Chile) (AES GENER / MITSUBISHI)
4MW Cogeneration Plant (Spain) (CUMMINS)
Andorra Power Plant. (Andorra) (ENDESA)
Brazi CCGT Power Plant (Romania) (ENEL)
Escatron Combined Cycle Power Plant (Spain)
Escombreras Combined Cycle Power Plant (Spain)
Gas Turbine Open Cycle Power Plant (Nigeria)
REFERENCES
Experience and excellence
REFERENCES
Experience and excellence
Water
Galindo Waste Water Treament Plant (Spain) (DEGREMONT)
Demineralization plant MATHIEU OPEN CYCLE (Argentina) (DURO FELGUERA)
Demineralization plant LUJAN II (Argentina) (DURO FELGUERA)
La Caleta Desalination Station (Spain) (EDAM)
Alexandria East Wastewater Treatment Plant (Egypt) (EWTP)
Pumping Station – Segarra-Garrigues System (Spain)
Other industries
Arcelor-Asturias Production Plant (Spain) (ARCELOR)
Polymers Plant (USA) (SOLVAY)
Greenfiel Nitrogen Fertilizer Plant (USA) (OCI FERTILIZER GROUP)
Cepsa Quimica Puente Mayorga. Alquilation Unit (Spain) (INTECSA / CEPSA)
Chemical Plant (The Netherlands) (DEGUSSA)
Food production plant (Spain) (GULLON)
Las Cruces Cupper Plant (Spain) (SNC LAVALIN / COBRE LAS CRUCES)
Polymers Plant (Spain) (ELIX POLYMERS)
TAQSA Industrial Complex (Spain)
Waste Treatment Plant RECIMED (Spain)
Centro PSA Peugeou (Spain) PSA PEUGEOUT
REFERENCES
Expertise. Deep into solutions
SERVICES
Heat Transfer and Process Equipment Technology
One-source technology, engineering and detail design partner
• Thermal & Hydraulic Design and plant process • FEM advanced analysis
Integration • Detail Engineering. Manufacturing drawings
• CFD simulation of heat transfer and flows • Advisory around underperformance, heat losses,
performance. performance reduction and Troubleshooting of existing
• Mechanical Design equipment
• CHT studies (Conjugated Heat Transfer)
SERVICES
Simulation Engineering
Expert Engineers, not just simulation software users.
Based on an extensive background of more than 15 CADE’s simulation activities are usually related to
years, CADE delivers leading advanced simulation, evaluate complex physics, by deploying advanced
engineering and consultancy FEA/CFD services simulation capabilities and techniques to evaluate
around heat transfer and process equipment, high and foresee any critic failure mode.
temperature/pressure piping, ducts systems and non-
conventional structures or systems.
CADE’s solutions based on advanced simulation engineering allow our clients to be supported with a cost-
effective value engineering and consultancy expertise aimed to validate, assess and foresee an optimal
performance of critical equipment and plant systems.
We provide high-level engineering across all major CADE delivers multi-disciplined engineering services
process industries with special focus on CSP including conceptual engineering, front-end engineering,
(concentrated solar power), conventional power detail engineering and design, procurement,
generation, refining and petrochemicals plants, commissioning and start-up support services fully adapted
where CADE counts on a relevant track record of to our client’s requirements.
executed plant engineering projects and supplied
consulting and engineering services.
SERVICES
EngineeringAnalysis
Value engineering directly translated into benefit.
CADE’s engineering analysis service comprises those engineering, simulation and consulting multidisciplinary
services that are aimed to assess critical plant equipment, high temperature piping, pressure vessels and structures
when performance is not the expected, failure has occurred or mechanical integrity and remaining life must be
evaluated..
Most of times FFS is applied when inspection findings revealed a condition that may impact the future operation of the
asset, such as metal loss (e. corrosion/erosion), distortion (misalignment, out of roundness, bulges or dents), laminations,
cracking or blisters, etc. Then, a fundamental decision is required (to repair, to replace, to retire, to rerate or to re-operate)
Fitness-for-Service (FFS) Assessment is a quantitative engineering evaluation to determine if an in-service equipment is safe
and reliable to operate at specific conditions along a defined time. FFS must be consider as a critic stage of any
Mechanical Integrity Program.
An asset lacks its original design information or it may have exceeded its useful life
For equipment operating in either high temperature and/or cyclic service
For decommissioned asset that may be used in a different service
Assets that have undergone any event that might have affected its serviceability like temperature excursions,
overloads, different feed/external environment or a fire.
SERVICES
EngineeringAnalysis
Value engineering directly translated into benefit.
Plant equipment, high responsibility piping or critic components not meeting their intended design life, or accidents and
failures often result from factors including:
Design errors Misuse or abuse
Material imperfection Improper maintenance
Manufacturing/assembly issues Unforeseen operating conditions
Improper heat treatments Inadequate materials selection
CADE delivers comprehensive assessment and investigation of failures counting on a multidisciplinary engineering
approach, as powerful tool to determine what have actually occurred when an in-service failure arise.
Usually, a combination of factors is responsible of failure. Determination of the influence of identified potential factors and
how these factors have been combined to lead into a failure is the key to demonstrate, through a physical and /or a
simulation model characterization, its source.
SERVICES
EngineeringAnalysis
Value engineering directly translated into benefit.
Performance Assessement
CADE engineers collaborate with plant operators, Operating and historical data analyses identify
process licensors and engineering firms to solve opportunities or foresee future issues. Modeling and
some of the industry’s toughest and critic technology-aided tools pinpoint problems. Lifecycle
equipment reliability, performance and plant cost calculations provide solutions, technical
availability challenges. recommendations and economic justifications.
CADE’s performance assessment have proven especially valuable in plants where process
parameters have changed or where systems degradation has occurred.
SERVICES
Process & Mechanical Consulting
When in-depth technical knowledge and proven engineering performance is required.
Our support can clearly explain the precise reasons for failure in laymen’s terms and our services provide independent analysis, reviews of
technical evidence and documentation, and provision of both written and oral testimony to courts, arbitrations, mediations and inquiries
when required.
Most of times, due diligence are guided to acquire Upgrading and modernizing Investment on aging plants
accurate information about the current and future status Long term O&M contracts with third companies
of assets, as essential matter when owner is negotiating: Determination of actual value of assets and depreciation mechanism
SERVICES Determination of dismantling cost and residual value of assets