A JPCL eResource
A JPCL eBook
Copyright 2014-2015 by
Technology Publishing Company
2100 Wharton Street, Suite 310
Pittsburgh, PA 15203
SPONSORED BY
Contents
iv Introduction
3M Scotchkote A
3M Scotchkote
™
Abrasion
brasion ™
R
Resistant
esistant Ep
Epoxy
oxy C
Coating
oaating
(AREC) 3328
(AREC) 28
Combining a traditional liquid epoxy with enhanced
abrasion resistance, flexibility, and impact resistance,
Scotchkote AREC 328 can be used in place of a
conventional Abrasion Resistant Overcoat (ARO) or
as a primary corrosion protection coating. Best of all,
Scotchkote AREC 328 is easy to apply.
Introduction
This eBook features an article from the Journal of Protective Coatings & Linings
(JPCL) about improving polyurethane pipe coatings for application in harsh condi-
tions, as well as JPCL Buying Guide data pertaining to selecting and specifying
coatings for transmission pipeline application in various exposure environments.
All information about the article and materials is based on the original dates of
publication of these materials in JPCL.
©iStockphoto/aksphoto
L
By Andreas aus der Wieschen,
tance in the field of external coatings for oil and gas pipelines.
Coating systems based on aromatic polyisocyanates and pre-
Matthias Wintermantel,
polymers are used for new pipeline construction and for main-
Todd Willams, and Ahren Olson
tenance work. Bayer MaterialScience AG
Major drivers for the use of polyurethane coatings in pipe applica-
tions are their favorable cure characteristics combined with superior
mechanical properties especially under harsh conditions. Solvent-free,
two-component polyurethane systems have been approved as suit- on vertical surfaces and allows the formation of high film thicknesses
able protective coatings systems within the pipeline industry and have applied in one coating layer. Therefore PU systems can fulfill the pos-
been used for new tubes (steel and ductile iron) and for field joints. tulated requirements with dry film thicknesses of about a minimum of
Furthermore polyurethanes are of growing importance for the ren- 500 µm up to 5,000 µm and higher.
ovation of oil and gas pipelines in the field due to their ability to cure
at low temperatures and their exceptional mechanical properties. Curing Time and Reactivity
Standard polyurethane systems are touch-dry after approximately 60
Application Properties minutes at 20 C or approximately 100 minutes at 5 C. The time for
Solvent-free two-component PU coatings have the ability to create an through drying can vary from approximately 50 minutes to approxi-
inherent thickener effect during application. This effect avoids sagging mately four hours at 20 C. The reactivity of a polyurethane sys-
© 2014-2015 Technology Publishing Co.
2
Development of Rigid, Two-Component Polyurethane Coatings ing of Pipeline Coatings Subjected to Elevated Temperatures.”
Market requirements led to development of rigid, two-component Polyurethane pipe coatings which provide higher crosslinking
polyurethane coatings by improving on already-established densities in the cured film usually pass the cathodic disbonding
polyurethane raw materials. Desired attributes of this advanced tests up to 65 C. The prepared surface, specifically the roughness
coating included serviceability for buried pipelines positioned profile after blasting, has an important influence on adhesion and
above- and below-underground-water level, short-drying time, cathodic-disbonding-test results. The minimum surface quality
short-curing time, single-coat suitability for direct-to-metal applica- should be Sa 2.5 with a roughness minimum of 50–70 µm, and a
tion, durability under harsh conditions, favorable cathodic-dis- recommended roughness of 80–100 µm.
bonding properties, favorable impact properties and straight Pipe coatings must fulfill certain cathodic-disbonding properties.
mixing ratio. Figure 3 (p. 37) illustrates a schematic design of a cathodic dis-
Steps of development included screening of suitable building bonding (CD) test. CD tests are used to evaluate the damaged coat-
blocks; selection of the best candidates for extended testing for ing's delamination behavior using conditions that model the
anticorrosion properties, adhesion, porosity and curing character- service environment including cathodic protection, elevated serv-
istics; working out start formulations for test coatings; working out ice temperature, and salt solution (representing ground water).
straight mixing ratios and rheological profile. The develpment out- Steel panels with different surface profiles (roughness) were
come is a "rigid" or "strucutral" class of PU pipeline coatings based tested at various temperatures. Coated steel panels were sent to
on new polyols and polyisocyanate pre-polymers. an independent test institute for investigation of cathodic disbond-
ing characteristics according to T/SP/CW/6 Part 1. The tests were
Laboratory Testing carried out for 15 days at 80 C and for 15 days at 95 C. The elec-
Cathodic Disbonding Test trolyte was maintained at 30 C in both tests. The results of these
Various test procedures exist within the pipeline industry and have dif- tests were approximately 3 mm disbondment after 15 days at 80 C
ferent requirements for voltage, temperature, salt solution and test pe- and approximately 5 mm disbondment after 15 days at 95 C.
riod. The most regularly-used test methods follow standards ASTM Figure 4 (p. 38) depicts the result of the cathodic disbonding
G8, “Standard Test Methods for Cathodic Disbonding of Pipeline Coat- test after 14 days at 80 C. The result in terms of adhesion and
ings,” and ASTM G42, “Standard Test Method for Cathodic Disbond- disbondment is very good at surface roughness of approxi-
Fig. 5: Application of test coating in the Middle East Fig. 6: Inspection of rigid test coating after 15 vent-free, aromatic, two-compo-
months. No defects or damages were observed.
Table 3: Requirements of EN 10289 (selection) This material is potentially suitable for harsh
Impact resistance 5 J x k x mm (23 C) mm of coating thickness conditions like high-ground-water level covering
Adhesion test, pull-off method 7 MPa (23 C) the pipeline, and also for higher service tempera-
tures (>80 C). Backfilling with the test coating was
Cathodic disbonding test Average ≤6 mm, max. ≤8 mm (28d at RT, 2d at 60 C)
done only three hours after application, which is
Elongation No requirement!
considerably less than the typical duration. Further-
more, the test coating fulfills several requirements
Table 4: New Polyols for Rigid Polyurethane Coatings of the international epoxy standard EN 10289,
Polyol Property Polyol 1 Polyol 2 Polyol 3 Polyol 4 "Steel tubes and fittings for onshore and offshore
pipelines - External liquid applied epoxy and
OH content [wt. %] 12.1 14.2 16.7 18.8
epoxy-modified coatings" (Table 3).
Viscosity [mPas] 5,500 5,400 1,800 19,200
Density [g/cm3] 1.06 1.02 1.04 1.02
Rigid Polyurethane Types 2, 3 and 4
Average Functionality 3.7 4 3 4
Coating types 2 and 3 are standard pipe-coating
systems (also applicable for ductile iron pipes), ex-
Table 5: New Polyisocyanate Pre-Polymers
isting in the market for decades with proven performance. These
for Rigid Polyurethane Coatings
coatings are typically used for pipelines with service tempera-
Property Pre-Polymer Pre-Polymer 2 tures of up to 60 C and higher – depending on the formulation.
NCO content [wt. %] 21.5 24 As type 3 is a relatively hard coating, it might be a better option
Viscosity [mPas] 400 220 for colder regions with permanent frost because its increased
3
Density [g/cm ] 1.16 1.17 flexibility could help prevent cracking and coating failure.
Type 4, an elastomeric, might be not a good contender as di-
rect-to-metal pipe coating, especially at high service tempera-
tures because the crosslinking density is low compared to the
nent polyurethane coatings also deemed suitable for pipelines others, which has a direct negative impact on its corrosion pro-
above- and below-ground water level and specific service tem- tection and cathodic-disbonding properties.
peratures (Table 2, p. 38).
New Raw Materials for Rigid Polyurethane
Rigid Polyurethane Type 1 By combining the polyols shown in Table 4 with the polyiso-
By roughly comparing four cases in consideration of the cyanate pre-polymers shown in Table 5 it is possible to achieve
crosslinking density of the cured film, the influence of the exceptional anticorrosion properties. The combination of polyol
crosslinking network on the coating properties was apparent. 1 and pre-polymer 1 was tested in the field under real condi-
The cured film of rigid polyurethane type 1 is highly crosslinked tions. In addition, it is possible to achieve mixing ratios of 1:1
yielding exceptional cathodic-disbonding properties at tempera- and 2:1 by volume.
tures of 80–95 C.
Pipe coatings generally have acceptable impact resistance of Conclusion
≥8 J/mm at room temperature and Shore D hardness of 75 to 85. Polyurethane pipe coatings are a versatile product class that can
The rigid PU coating had a value of approximately 16 J/mm at be tailored to meet a wide range of end-use applications. Vary-
Shore hardness of ca. D80. The rigid PU coating's highly ing the catalyst, crosslinker and polyol allows the coating formu-
crosslinked density imparts much lower water absorption than lator to develop a range of properties from elastomeric to rigid.
standard coatings and provides improved anticorrosion proper- A new class of rigid polyurethane pipe coating raw materials
ties. The elongation at break is less than 10 percent which could were developed to meet higher cathodic disbondment require-
yield less bending ability for new coated tubes in the field during ments and their performance under harsh, real-world conditions
the construction of a new pipeline, although it could be reason- looks promising.
able to bend uncoated tubes first and then apply the coating.
SPONSORED BY
Denso North America Nukote Coating Systems Canada, Inc. Wasser Corporation
Protal Nukote Wasser
Other Polyurea Pure (1, 2, or 3 coats) MCU/MCU/MCU
Devoe HPC (International Paint, LLC) Nukote Coating Systems International Wilko Paint, Inc.
Devoe High Performance Coatings Nukote LP Wilkoshield
Epoxy/Epoxy/Epoxy Polyurea Pure (1, 2, or 3 coats) Epoxy Novolac (1 or 2 coats)
Diamond Vogel Paint Company Peerless Industrial Systems Wolverine Coatings Corporation
Mult-E-Poxy 180 Epigen KIS ChemShield
Epoxy/Epoxy/Epoxy Other Epoxy 100% Solids (1 or 2 coats)
Dunn-Edwards Polibrid Coatings, Inc. ZRC Worldwide
Multiple Brand Options Polibrid 705 ZRC-221 Cold Galvanizing Compound
Epoxy/Epoxy/Epoxy Urethane Elastomeric (1 coat) Zinc-Rich, Organic
Duromar, Inc. Polycoat Products
SAR Polyeuro 5502
Epoxy 100% Solids (1 or 2 coats) Polyurea Pure (1, 2, or 3 coats) Field Joint Coating
EA Wilcox Polyguard Products, Inc. of Buried Pipe
Endura Flex R Polyguard RD-6 Concrete
Urethane/Urethane Tape Wraps
Enviroline (International Paint, LLC) PPG Protective & Marine Coatings
Arma Coatings
Enviroline Amercoat
Arma 90AS
Epoxy Novolac (1 or 2 coats) Epoxy 100% Solids (1 or 2 coats)
Polyurea Pure (1, 2, or 3 coats)
ErgonArmor Novocoat Rhino Linings Corporation
Bowers Industrial
Novocoat SC2200 Rhino Linings Epoxy
Duromar
Epoxy 100% Solids (1 or 2 coats) Epoxy 100% Solids (1 or 2 coats)
Epoxy/Epoxy 100% solids
Gemite Products, Inc. Rodda Paint Co./Cloverdale Paint
Carboline Company
Fibre-Prime 83324 Girth Weld Coating
Polyclad
Other Epoxy 100% Solids (1 or 2 coats)
Urethane/Urethane
Global EcoTechnologies Roval USA Corp.
CCI Con-Tech of California, Inc.
Endura-Flex Roval R22 Cold Galvanizing Compound
Hydro-Pox
Urethane Elastomeric (1 coat) Zinc-Rich, Organic
Epoxy/Epoxy 100% Solids
Grace Distributing Rust Bullet, LLC
Ceilcote (International Paint, LLC)
LifeGuard Active Rust Primer Rust Bullet Standard
Ceilcote/Flakeline MR
Other Other
Vinyl Ester/Vinyl Ester/Vinyl Ester
Highland International, Inc. Sauereisen, Inc.
Chemco International Ltd.
74 Chem-Temp Hybrid Epoxy Sauereisen
RS 500P & RA 500M
Epoxy Novolac (1 or 2 coats) Urethane/Urethane
Epoxy/Epoxy 100% Solids
HJ3 Composite Technologies Seal For Life Industries
ChemCo Systems
HJ3 CarbonSeal Industrial Systems Stopaq
CCS High Chemical Resistance
Epoxy/Epoxy Novolac/Epoxy Novolac Tape Wraps
Epoxy/Epoxy 100% Solids
HydraTech Engineered Products Sherwin-Williams
ChemMasters, Inc.
HydraWrap Fast Clad ER
Mastergard Series
Epoxy 100% Solids (1 or 2 coats) Epoxy 100% Solids (1 or 2 coats)
Coal Tar/Asphalt
Industrial Nanotech, Inc. Simpson Strong-Tie
Corrocoat USA, Inc.
Nansulate EPX FX-494P, FX-494 FFS Protective Ctg.
Polyglass VE
Epoxy/Epoxy/Epoxy Epoxy 100% Solids (1 or 2 coats)
Vinyl Ester/Vinyl Ester/Vinyl Ester
International Paint, LLC Specialty Products, Inc. (SPI)
Cote-L Industries, Inc.
International Polyshield HT-UB, Polyshield Hi-E, EPL-9
Durabak/Durabak Smooth
Epoxy/Epoxy/Epoxy Polyurea Pure (1, 2, or 3 coats)
Urethane/Urethane
International Polyurethane Systems Tesla NanoCoatings, Inc.
CSL Silicones, Inc.
SBR3002 Teslan
Si-Coat 580
Polyurea Hybrid (1, 2, or 3 coats) Organic Zinc/Epoxy/Epoxy
Siloxane/Siloxane
KCC Corrosion Control Co., Ltd. Thermion
Daubert Cromwell
Techni-Plus EN PLC Thermion
Versil-Pak
Other Thermal Spray
Wax
KEMA Coatings LImited Thin Film Technology, Inc.
Denso North America
KEMA 300PA BIio-Dur 563
Protal
Epoxy 100% Solids (1 or 2 coats) Epoxy/Epoxy 100% Solids
Other
Kopak Industries The Thortex Group
Devoe HPC (International Paint, LLC)
Kopak 3M Scotchkote 232
Devoe High Performance Coatings
Epoxy Coal Tar/Epoxy Coal Tar Epoxy/Epoxy 100% Solids
Epoxy/Epoxy/Epoxy
Lone Star Specialties, LLC 3M Corrosion Protection Products
Diamond Vogel Paint Company
Reilly Coal Tar Enamel Scotchkote
Mult-E-Poxy 180
Coal Tar/Asphalt Epoxy 100% Solids (1 or 2 coats)
Epoxy/Epoxy/Epoxy
Madison Chemical Industries TMS Metalizing Systems, Ltd.
Dunn-Edwards
MG 120 TMS Metalizing Systems
Multiple Brand Options
Epoxy 100% Solids (1 or 2 coats) Thermal Spray
Epoxy/Epoxy/Epoxy
NSP Specialty Products U.S. Coatings, LLC
Duromar, Inc.
NSP-120 High Performance Epoxy Coating EpoxyGrip
SAR
Epoxy 100% Solids (1 or 2 coats) Epoxy 100% Solids (1 or 2 coats)
Epoxy 100% Solids (1 or 2 coats)
HydraTech Engineered Products Rodda Paint Co./Cloverdale Paint Above Ground Pipe
HydraWrap ClovaMastic/Armourshield XP Exteriors
Epoxy 100% Solids (1 or 2 coats) Epoxy (1-2 coats)/Urethane
Concrete
Hy-Tech Thermal Solutions Roval USA Corp.
Metal Shield Roval R22 Cold Galvanizing Compound
Calcium Sulphonate Zinc-Rich, Organic ABRI Industries
Industrial Nanotech, Inc. Rust Bullet, LLC MicroBond 87
Nansulate PT Rust Bullet Standard Inorganic Zinc/Epoxy/Urethane
Thermal Spray Other AcryliCon Flooring Solutions
International Paint, LLC Sauereisen, Inc. AcryliCon Laquer
International Sauereisen Other
Organic Zinc/Epoxy/Urethane Urethane/Urethane Arma Coatings
International Polyurethane Systems Seal For Life Industries Arma 901 Polyurea & Aspartic
SBR3002 Stopaq Polyurea Pure (1, 2, or 3 coats)
Polyurea Hybrid (1, 2, or 3 coats) Other Bowers Industrial
Jotun Paints, Inc. Sherwin-Williams Duromar
Resist 86/Penguard Express/Hardtop Optima Macropoxy 646 Fast Cure Epoxy Epoxy 100% Solids (1 or 2 coats)
Inorganic Zinc/Epoxy/Siloxane Epoxy (1-2 coats)/Urethane Carboline Company
KCC Corrosion Control Co., Ltd. Simpson Strong-Tie Carboguard
Techni-Plus UR-5 FX-480, FX-70-9 Protective Ctg. Epoxy/Epoxy/Epoxy
Urethane/Urethane Epoxy/Epoxy 100% Solids Ceilcote (International Paint, LLC)
KEMA Coatings LImited Specialty Products, Inc. (SPI) Ceilcote/ Flakeline MR
KEMA Milspec T-4 Polyshield HT-100F UB, AMP 100, CAP 100 Epoxy/Epoxy Flake Filled/Epoxy Flake Filled
Organic Zinc/Epoxy/Urethane Polyurea Pure (1, 2, or 3 coats) Chemco International Ltd.
Kopak Industries Stirling Lloyd Group Plc. RS 500P & RA 500M
Kopak Integritank Epoxy/Epoxy 100% Solids
Epoxy/Epoxy/Epoxy Methyl Methacrylate/Methyl Methacrylate ChemMasters, Inc.
Madison Chemical Industries Stirling Lloyd Products, Inc. Colorlastic
CorroPipe II Aliphatic Integritank Alkyd/Acrylic/Acrylic
Polyurea Hybrid (1, 2, or 3 coats) Methyl Methacrylate/Methyl Methacrylate Convenience Products/Seal-Krete
NIC Industries Termarust Technologies Seal-Krete Dura-Shell WB
Prismatic Termarust TR2000 HR CSA Series Urethane/Urethane
Epoxy/Polyester/Polyester Calcium Sulphonate Copps Industries, Inc.
NSP Specialty Products Tesla NanoCoatings, Inc. Armorgard 500
NSP-120 High Performance Epoxy Coating Teslan Epoxy/Epoxy 100% Solids
Epoxy 100% Solids (1 or 2 coats) Organic Zinc/Epoxy/Epoxy Corrocoat USA, Inc.
Nukote Coating Systems Canada, Inc. Thermion Polyglass Zipcoat
Nukote Thermion Polyester/Polyester/Polyester
Polyurea Pure (1, 2, or 3 coats) Thermal Spray Cote-L Industries, Inc.
Nukote Coating Systems International The Thortex Group Durabak 18/Durabak 18 Smooth
Nukote PA II 3M Scotchkote Epoxy Primer GP 120 Urethane/Urethane
Polyurea Pure (1, 2, or 3 coats) Epoxy/Epoxy 100% Solids CSL Silicones, Inc.
Peerless Industrial Systems TMS Metalizing Systems, Ltd. Si-Coat 580
Epigen TMS Metalizing Systems Siloxane/Siloxane
Epoxy 100% Solids (1 or 2 coats) Thermal Spray Denso North America
Polibrid Coatings, Inc. U.S. Coatings, LLC Protal
Polibrid 705 ZincGard/EpoxyGrip.UreGrip Other
Urethane Elastomeric (1 coat) Organic Zinc/Epoxy/Urethane Devoe HPC (International Paint, LLC)
Polycoat Products VersaFlex Incorporated Devoe High Performance Coatings
Polyeuro 5502 FSS 50 DM Epoxy (1-2 coats)/Urethane
Polyurea Pure (1, 2, or 3 coats) Polyurea Pure (1, 2, or 3 coats) Diamond Vogel Paint Company
PPG Protective & Marine Coatings Wasser Corporation Mult-E-Poxy 180/Multi-Thane 330
Amercoat Wasser Epoxy (1-2 coats)/Urethane
Epoxy (1-2 coats)/Urethane MCU Zinc Rich/MCU/MCU The Dow Chemical Company
Premier Coating Systems, Inc. Watson Coatings, Inc. Vorastar
PCS-#1100/PCS-#4300 Aqua-Shield Polyurea Hybrid (1, 2, or 3 coats)
Other Epoxy (1-2 coats)/Acrylic (1-2 coats) Dunn-Edwards
Rhino Linings Corporation Wilko Paint, Inc. Multiple Brand Options
Rhino SolarMax Wilko Epoxy/Epoxy/Siloxane
Urethane/Urethane Epoxy (1-2 coats)/Urethane Duromar, Inc.
Wolverine Coatings Corporation HPL-1110 / HPL-1110
ChemShield Epoxy 100% Solids (1 or 2 coats)
Epoxy 100% Solids (1 or 2 coats)
ZRC Worldwide
ZRC-221 Cold Galvanizing Compound
Zinc-Rich, Organic
SPONSORED BY
Company Profiles
Atlantic Metal Coatings Blome International Capitol Paint Manufacturing Corp. Chemical Products Industries
25 Dundee Avenue Part of the HEMPEL Group 722 SW 23rd St. 7649 SW 34th Street
Mt. Pearl, NF A1N 4R6 Canada 1450 Hoff Industrial Dr. Oklahoma City, OK 73109 Oklahoma City, OK 73179
Phone: 709-364-7262 O'Fallon, MO 63366 Phone: 405-634-3383 Phone: 405-745-2070
Contact: Roy Miller Phone: 636-379-9119 Contact: Stan Ballew Contact: Jordan Flaniken
coatings@nf.sympatico.ca Contact: Marsha Parker rlwoolery@yahoo.com jordan@cpiinc.net
info@blome.com capitolpaintmfg.com chemicalproductsokc.com
Atlas Minerals & Chemicals, Inc. blome.com
1227 Valley Rd. Carboline Company Chemline
Mertztown, PA 19539 Blue River Coatings 2150 Schuetz Rd. 5151 Natural Bridge Rd.
Phone: 610-682-7171 2910 South Nebraska Ave. St. Louis, MO 63146 St. Louis, MO 63115
Contact: Scott Gallagher Hastings, NE 68901 Phone: 314-644-1000 Phone: 314-664-2230
sales@atlasmin.com Phone: 888-420-2628 carbolineservice@carboline.com Contact: Steve Jacobs
atlasmin.com Contact: Phil Morgan carboline.com jsegbers@chemline.net
phil@bluerivercoatings.com See our display ad, inside front cover. chemline.net
Avid Protective Products Ltd. bluerivercoatings.com
2085 Laurelwood Dr. CCI Con-Tech of California, Inc. ChemMasters, Inc.
Oakville, ON L6H 4S8 Canada Blue Water Marine Paint 2211 Navy Dr. 300 Edwards Street
Phone: 905-339-8386 1999 Elizabeth St. Stockton, CA 95206 Madison, OH 44057
Contact: David Walker North Brunswick, NJ 08902 Phone: 209-941-8324 Phone: 440-428-2105
avid@bell.net Phone: 908-967-9867 Contact: Steven A. Williams Contact: Rich Tanski
Contact: Paul Marzocca sw@hydro-pox.com rtanski@chemmasters.net
Avilion Inc. pmarzocca@gmail.com hydro-pox.com chemmasters.net
3947 Lincoln Highway bluewatermarinepaint.com
Downingtown, PA 19335 Ceilcote (International Paint LLC) CIM Industries
Phone: 610-942-7388 Bowers Industrial 6001 Antoine Dr. 23 Elm St.
Contact: Michelle Morkun 3645 W. 1987 South Houston, TX 77091 Peterborough, NH 03458
michelle@avilioninc.com Salt Lake City, UT 84104 Phone: 800-589-1267 Phone: 603-924-9481
avilioninc.com Phone: 800-892-5224 pcmarketing.americas@akzonobel.com Contact: Becky Tatro
Contact: Kevin Bowers international-pc.com information@cimind.com
Axalta Coating Systems North America bowers@xmission.com cimindustries.com
9800 Genard Rd. bowersindustrial.com Celufibre Industries Inc.
Houston, TX 77041 14735 124th Ave. Cloverdale Paint Inc.
Phone: 800-247-3886 Bradley Coatings Group Edmonton, AB T5L 3B2 Canada 6950 King George Blvd.
info.powder@usa.dupont.com 2873 West Hardies Rd. Phone: 780-447-1255 Surrey, BC V3W 4Z1 Canada
powder.dupont.com Gibsonia, PA 15044 Contact: Kevin Olsen Phone: 403-236-4777
Phone: 724-444-4400 kevin.olsen@can-cell.com Contact: Trevor Newell
Contact: Phil Capriotti can-cell.com tnewell@cloverdalepaint.com
B philc@bradleycoatings.com
bradleycoatings.com Ceram-Kote Coatings Inc.
1800 Industrial Drive
cloverdalepaint.com
CMP/Chugoku
BASF Corporation- Burke Industrial Coatings Big Spring, TX 79720 1610 Engineers Rd.
Construction Systems 600 South 74th Pl., Ste. 108 Phone: 432-263-8497 Belle Chasse, LA 70037
889 Valley Park Dr. Ridgefield, WA 98642 Contact: Kevin Freeman Phone: 504-392-4817
Shakopee, MN 55379 Phone: 800-348-3245 freecom@ceram-kote.com Contact: Nancy Barton
Phone: 800-433-9517 Contact: Jim Harris ceram-kote.com pcasey@cmpusa.com
basfbscst@basf.com jpharris@burkeindustrialcoatings.com cmp.co.jp
buildingsystems.basf.com burkeindustrialcoatings.com Chemco International Ltd.
East Shawhead Industrial Estate Coating Systems & Supply, LLC
Bechtel Industrial Coating Supply Coatbridge, ML5 4XD U.K. 11479 Darryl Dr.
21424 SE 16th Place
Sammamish, WA 98075
Phone: 425-392-1876
C Phone: 44-1236 606060
Contact: Manny Khorasani
sales@chemcoint.com
Baton Rouge, LA 70815
Phone: 225-272-6385
Contact: Michael R. Lea
Contact: Robert Bechtel Cantex Coatings Ltd. chemcoint.com mike@cssbtr.com
sales@bechtelcoatingsupply.com 2390 Industrial St. coatingsystemsandsupply.com
bechtelcoatingsupply.com Burlington, ON M7P 1A5 Canada ChemCo Systems
Phone: 905-319-8972 2800 Bay Rd. Coatings For Industry, Inc.
Benjamin Moore & Co. Contact: Jerry Van Veldon Redwood City, CA 94063 319 Township Line Rd.
101 Paragon Drive sales@cantexcoatings.com Phone: 800-757-6773 Souderton, PA 18964
Montvale, NJ 07645 cantexcoatings.com Contact: John Bors Phone: 877-723-0919
Phone: 888-236-6667 email@chemcosystems.com Contact: Kevin Klotz
sherry.totaro@benjaminmoore.com chemcosystems.com cficoatings.com
benjaminmoore.com
Company Profiles
Comex Group Contego International, Inc. Corrocoat Limited CSL Silicones, Inc.
5575 DTC Parkway 334 Greyhound Pass West Forster St. 144 Woodlawn Road West
Greenwood Village, CO 80111 Carmel, IN 46032 Leeds, West Yorkshire, LS10 1PW U.K. Guelph, ON N1H 1B5 Canada
Phone: 720-873-3060 Phone: 800-434-6444 Phone: 44-113-2760760 Phone: 519-836-9044
customerservice@thecomexgroup.com Contact: Tony Scott Contact: Graham Greenwood Contact: Patrick Burns
thecomexgroup.com info@contegointernational.com corrocoat.com info@cslsilicones.com
contegofirebarrier.com cslsilicones.com
Composite Technologies Corrocoat USA Inc.
2010 Scott Ave. Contract Coatings Corporation 6525 Greenland Road
Calberton, NY 11933
Phone: 631-680-0662
Contact: Gerald Hallissy
706 E. Main St.
Stockton, CA 95202
Phone: 209-465-2634
Jacksonville, FL 32258
Phone: 904-268-4559
Contact: Josh Tankersley
D
halintl@aol.com Contact: Arlen Williams info@corrocoat.com Dampney Co., Inc.
composite-technologies.com mppaint@pacbell.net corrocoatusa.com 85 Paris Street
Everett, MA 02149
Concrete Coatings, Inc. Convenience Products/Seal-Krete Corroseal/Rodda Paint Co. Phone: 617-389-2805
1105 N. 1600 W. 306 Gandy Rd. 6107 N. Marine Drive Contact: Dennis Aikman
Layton, UT 84041 Auburndale, FL 33823 Portland, OR 97203 dennis@dampney.com
Phone: 801-544-8771 Phone: 800-323-7357 Phone: 800-237-1573 thurmalox.com
Contact: Cory Christensen Contact: David Haskell Contact: Sue Steele
info@concretecoatingsinc.com dhaskell@seal-krete.com ssteele@roddapaint.com Daubert Chemical Co.
concretecoatingsinc.com hp.seal-krete.com corroseal.com 4700 S. Central Ave.
Chicago, IL 60638
Concrete Sealants Cooley Group Corrotherm Protective Coatings, Inc. Phone: 708-563-8302
9325 State Rte. 201 50 Esten Ave. 175 Philmont Ave. Contact: Frank Vella
Tipp City, OH 45371 Pawtucket, RI 02860 Feasterville, PA 19053 fvella@daubert.com
Phone: 800-332-7325 Phone: 401-721-6216 Phone: 215-322-5255 daubertchemical.com
hello@conseal.com Contact: Michelle Hill Contact: Donald Kirk
conseal.com eminfo@cooleygroup.com donaldkirk@corrotherm.com Daubert Cromwell
cooleygroup.com corrotherm.com 12701 S. Ridgeway Ave.
Concrete Solutions Alsip, IL 60803
Products by Rhino Linings Copps Industries, Inc. Cortec Corporation Phone: 708-293-7750
9151 Rehco Rd. 10600 N. Industrial Dr. 4119 White Bear Parkway Contact: Jamie Powell
San Diego, CA 92121 Mequon, WI 53092 St. Paul, MN 55110 info@daubertcromwell.com
Phone: 800-422-2603 Phone: 800-672-2622 Phone: 651-429-1100 daubertcromwell.com
Contact: Bart Sadleir Contact: Jeff Oleson Contact: Cliff Cracauer
sales@concretesolutions.com coppsind@coppsindustries.com productinfo@cortecvci.com Davis Paint Company
concretesolutions.com coppsindustries.com cortecvci.com 1311 Iron Street
Kansas City, KS 64116
Conklin Company, Inc. Corolon Coatings & Cote-L Industries Inc. Phone: 800-821-2029
3951 NE Kimball Drive Corrosion Control Tech. Inc. 1542 Jefferson St. Contact: Cindy Williams
Kansas City, MO 64161 2 Haas Rd. Teaneck, NJ 7666 kostby@davispaint.com
Phone: 800-888-8838 Toronto, ON M9W 3A2 Canada Phone: 201-836-0733 davispaint.com
conklin.com Phone: 416-401-8855 Contact: Cy Fine
Contact: Stan E. Buchowski info@cotelind.com Denso North America
ConShield Technologies info@corolon.com cotelind.com 9747 Whithorn Drive
541 10th Street #233 corolon.com Houston, TX 77095
Atlanta, GA 30318 CRC-Evans Phone: 281-821-3355
Phone: 877-543-2094 Coronado Paint 7011 High Life Dr. Contact: Jesse Flores
Contact: Joe Cherry 308 Old County Road Houston, TX 77066 info@densona.com
info@conshield.com Edgewater, FL 32132 Phone: 832-249-3100 densona.com
conshield.com Phone: 386-428-6461 Contact: Kevin Allen See our display ad, p. 117.
Contact: Richard Lutz kevin.allen@sbdinc.com
Construction Specialties Group, Inc. coronadopaint.com crc-evans.com Dependable, LLC
15783 Crocus Lane PO Box 16307
Dumfries, VA 22025 Corotech High Performance Coatings Creto Worldwide Rocky River, OH 44116
Phone: 703-670-5300 101 Paragon Drive 125 East Reno Ave. Suite 1 Phone: 717-951-0494
Contact: Neil Savitch Montvale, NJ 07645 Las Vegas, NV 89119 Contact: Joe Hostler
conspec@comcast.net Phone: 201-949-6216 Phone: 702-372-6274 info@dependable.us
Contact: Jeffrey T. Spillane Contact: John Rounds floorprep.com
Construction Systems Supply jeff.spillane@inslx.com johnr@creto.net
PO Box 3894 insl-x.com cretoworldwide.com Devoe High Performance Coatings
Seattle, WA 98124 (International Paint LLC)
Phone: 888-432-6807 Corporacion Mara SA Crossfield Products Corp. 6001 Antoine Dr.
Contact: Ron Riva Jr. Pereseo 251 3000 E. Harcourt Street Houston, TX 77091
info@csscorp.net Chorrillos, 9 Peru Rancho Dominguez, CA 90221 Phone: 800-589-1267
csscorp.net Phone: 51-12013535 Phone: 310-886-9100 pcmarketing.americas@akzonobel.com
Contact: Fredy Vidal Contact: Jodi Hood international-pc.com
fvidal@aurora.com.pe dexotex@cpcmail.net See our display ad, p. 56.
aurora.com.pe dexotex.com
Company Profiles
Diamond Liners, Inc. Dynamic Coatings, Inc. (DCI) Eoncoat, LLC Fire Free Coatings, Inc.
9507 Santa Fe Springs Rd. 5629 East Westover Ave., Suite A 1704 Park Central Blvd. North 580 Irwin Street Suite 1
Santa Fe Springs, CA 90670 Fresno, CA 93727 Pompano Beach, FL 33064 San Rafael, CA 94901
Phone: 562-781-1045 Phone: 877-225-2549 Phone: 754-222-4919 Phone: 415-459-6488
Contact: John Bender Contact: David Remmer Contact: Jim McBrayer Contact: Elisa Vivas
jhbender@diamondliners.com sales@dciflooring.com jim.mcbrayer@eoncoat.com info@firefree.com
diamondliners.com dciflooring.com eoncoat.com firefree.com
Diamond Vogel Paint Company EPDM Coatings Flame Control Coatings, LLC
1110 Albany Place SE
Orange City, IA 51041
Phone: 712-737-8880
E 494 Bridgeport Ave., Ste. 101-342
Shelton, CT 06484
Phone: 610-298-1989
4120 Hyde Park Blvd.
Niagara Falls, NY 14305
Phone: 716-282-1399
Contact: Perry Foreman EA Wilcox Contact: Kelly McCallister Contact: Tim Lockhart
perry.foreman@vogelpaint.com 173 Utah Ave. kellie@epdmcoatings.com flame@flamecontrol.com
diamondvogel.com South San Francisco, CA 94080 epdmcoatings.com flamecontrol.com
Phone: 650-871-5350
Dinoflex Group LP Contact: John Munson EPIC Supply, LLC Floor Seal Technology, Inc.
5590 46th Ave. john@eawilcox.com PO Box 5 1005 Ames Ave.
Salmon Arm, BC V1E 4S1 Canada eawilcox.com Bowmansville, NY 14026 Milpitas, CA 95035
Phone: 780-619-8568 Phone: 716-565-5450 Phone: 408-590-4849
Contact: Chad Rendle Elastomer Specialties, Inc. Contact: Carl R. Danelski Contact: Bill Clyne
crendle@ipsinc.com 10848 South 265th epicctgsupply@aol.com bclyne@floorseal.com
ipsinc.com Broken Arrow, OK 74014 floorseal.com
Phone: 918-486-4244 ErgonArmor Novocoat
The Dow Chemical Company Contact: Neil Moon PO Box 23028 FLOROCK, Crawford Labs, Inc.
9008 Building nmoon@elastomer.com Flowood, MS 39225 4165 S. Emerald Ave.
Midland, MI 48642 elastomer.com Phone: 877-982-7667 Chicago, IL 60609
Phone: 800-447-4369 communications@ergon.com Phone: 800-356-7625
Contact: Dave Peterson Endura Manufacturing Ltd. ergonarmor.com sales@florock.net
dow.com 12425 149th St. florock.net
Edmonton, AB T5L 2J6 Canada Euclid Chemical Company
Dudick, Inc. Phone: 780-451-4242 19218 Redwood Road FSC Coatings, Inc.
1818 Miller Parkway Contact: Elissa Milner Cleveland, OH 44110 5360 Eastgate Mall Rd., Ste. F
Streetsboro, OH 44241 emilner@endura.ca Phone: 800-321-7628 San Diego, CA 92121
Phone: 330-562-1970 endura.ca info@euclidchemical.com Phone: 800-579-8459
Contact: Barb Fischer euclidchemical.com Contact: Steve Cerenzie
bfischer@dudick.com ENECON Corporation fsccoating@aol.com
dudick.com 6 Platinum Court Evonik Industries fsccoatings.com
Medford, NY 11763 299 Jefferson Rd.
Dunn-Edwards Phone: 516-349-0022 Parsippany, NJ 07054
4885 E. 52nd Place
Los Angeles, CA 90058
Phone: 888-337-2468
Contact: Mike Tedesco
info@enecon.com
enecon.com
Phone: 973-929-8513
Contact: Anil Saxena
anil.saxena@evonik.com
G
custservice@dunnedwards.com dynasylan.com G.O.A. Enterprises -
dunnedwards.com Enviro Epoxy Products Agent for Chemco International Ltd.
90 Nolan Court #2 1700 Post Oak Blvd., 2 Blvd. Pl., Ste. 600
Duraamen Engineered Products Inc.
116 West 23rd Street
New York, NY 10011
Markham, ON L3R 4L9 Canada
Phone: 905-305-8551
Contact: Terry DeSouza
F Houston, TX 77056
Phone: 281-712-7035
Contact: S.L. (Sindee) Gillespie
Phone: 212-386-7609 info@enviroepoxy.com Fabick Protective Coatings slgillespie@goaenterprises.com
Contact: Victor Pachade enviroepoxy.com 4118 Robertson Road goaenterprises.com
info@duraamen.com Madison, WI 53714
duraamen.com Enviroline (International Paint LLC) Phone: 608-242-1100 G3 Tapes
6001 Antoine Dr. Contact: Steven Fabick 11639 Riverside Drive, Suite 103
Duromar, Inc. Houston, TX 77091 info@fabick.com Lakeside, CA 92040
706 Washington Street Phone: 800-589-1267 fabick.com Phone: 619-448-4439
Pembroke, MA 02359 pcmarketing.americas@akzonobel.com Contact: Meghan Jenkins
Phone: 781-826-2525 international-pc.com Farrell-Calhoun Paint lists@g3tapes.com
Contact: Daniel Toft 221 East Carolina g3tapes.com
info@duromar.com Environmental Protective Coatings Inc. Memphis, TN 38126
duromar.com 2035 Regency Rd., Ste. 5 Phone: 901-526-2211 Gaco Western
Lexington, KY 40503 Contact: Craig Ferguson 200 West Mercer St. Suite 202
Dynafloor Systems Phone: 859-277-0014 craigferguson@farrellcalhoun.com Seattle, WA 98119
553 Highland Rd. E. Contact: Homer O. Hart farrellcalhoun.com Phone: 800-331-0196
Macedonia, OH 44056 homerhartepc@aol.com customerservice@gaco.com
Phone: 800-453-6366 enviroprotectcoatings.com Farwest Corrosion Control Company gaco.com
Contact: Jerry Torelli 12029 Regentview Ave.
jt@dynafloor.com Envirotrol, Inc. Downey, CA 90241
dynafloor.com 2594 Flat Shoals Rd. Phone: 310-532-9314
Conyers, GA 30013 Contact: Marnie Rankin
Phone: 770-922-4737 sales@farwestcorrosion.com
Contact: Pat Beatty farwestcorrosion.com
envirotrolinc@bellsouth.net
envirotrol-inc.com
© 2014-2015 Technology Publishing Co.
19
Company Profiles
Gelest, Inc. Groco Specialty Coatings Highland International, Inc. Industrial Maintenance Group, Inc.
11 E. Steel Road 10818 C.F. Hawn Freeway 465 Industrial Park Dr. 1904 Industrial Park Drive
Morrisville, PA 19067 Dallas, TX 75217 Boone, NC 28607 Plant City, FL 33566
Phone: 215-547-1015 Phone: 972-286-7890 Phone: 828-265-2513 Phone: 813-659-3512
Contact: Gabrielle Lockwood Contact: Bob Guenther Contact: Katie Duda Contact: Pete Van Fossen
glockwood@gelest.com rcg@grocosc.com kduda@highland-international.com pete@industrialmaintenancegroup.com
gelest.com grocosc.com highland-international.com industrialmaintenancegroup.com
See our display ad, p. 63.
Gemite Products, Inc. Gulf Coast Paint Mfg., Inc. Industrial Nanotech, Inc.
1787 Drew Rd. 30075 County Road 49 HJ3 Composite Technologies 1925 Trade Center Way Ste. 1
Mississauga, ON L5S 1J5 Canada Loxley, AL 36551 2440 West Majestic Parkway Naples, FL 34109
Phone: 888-443-6483 Phone: 251-964-7911 Tucson, AZ 85705 Phone: 800-767-3998
Contact: Igor Nikolajev Contact: John R. Theis Phone: 520-322-0010 Contact: Francesca Crolley
sales@gemite.com info@gulfcoastpaint.com Contact: John Huedepohl contact@nansulate.com
gemite.com gulfcoastpaint.com sales@hj3.com nansulate.com
hj3.com
Georg Fischer Central Plastics Inliner Technologies
39605 Independence
Shawnee, OK 74804
Phone: 800-654-3872
H HydraTech Engineered Products
10448 Chester Road
Cincinnati, OH 45215
1468 West Hospital Road
Paoli, IN 47454
Phone: 812-723-0704
Contact: Mark Smith Hadek Protective Systems Phone: 513-827-9169 Contact: Geoff Yothers
mark.smith@georgfischer.com Foster Plaza 5, 651 Holiday Drive Contact: Peter Blais/Michael Fox gyothers@inliner.net
gfcp.com Pittsburgh, PA 15220 info@hydratechllc.com inliner.com
Phone: 412-204-0028 hydratechllc.com
Gill Industries, Inc. Contact: Benjamin Beck Innovative Coatings
3462 Kershaw Camden Hwy. hadek.com Hydrex Underwater Technology 1685 Rossi Drive
Lancaster, SC 29720 604 Druid Road E. Windsor, ON N9A 6J3 Canada
Phone: 803-285-4831 hci chemtech, inc. Clearwater, FL 33756 Phone: 519-737-9046
Contact: G. Shane Horton 310 S. Bellis St. Phone: 727-443-3900 Contact: Wayne Brady
shane@gill33.com Wausau, WI 54403 Contact: John Green sales@icoat.ca
gillindustries.com Phone: 800-596-6282 info@ecospeed.us icoat.ca
Contact: Cheryl Barton ecospeed.us
Glidden Professional hcimarketing@hciinfo.com Insulating Coatings Corporation
15885 W. Sprague Road hciinfo.com Hyperseal 27 Link Dr. Suite D
Strongsville, OH 44136 34-801 Spyder Circle Binghamton, NY 13904
Phone: 800-984-5444 HDIM Protective Coatings Palm Desert, CA 92211 Phone: 800-223-8494
Contact: info@gliddenprofessional.com 14538 121A Ave. Phone: 760-324-7900 Contact: Rick Thomas
Edmonton, AB T5L 4L2 Canada Contact: Brian Sherman info@icc-astec.com
Global EcoTechnologies Phone: 780-482-4346 bsherman@hyperseal.com whyreplace.com
PO Box 2205 Contact: Norm Walline
Antioch, CA 94531 norm.walline@hdimpc.ca Hy-Tech Thermal Solutions Integrated Protective Coatings Inc.
Phone: 925-754-4100 hdimpc.ca 159 Park Hill Blvd. 7036 50th St.
Contact: Scott Hobbs West Melbourne, FL 32904 Edmonton, AB T6B 2J8 Canada
scotthobbs@getcoatings.com Hempel (USA) Inc. Phone: 321-984-9777 Phone: 780-456-3467
getcoatings.com 600 Conroe Park North Drive sales@hytechsales.com Contact: Andrew Migdal
Conroe, TX 77303 hytechsales.com sales@ipccoatings.com
Global Industrial Coatings Phone: 936-523-6000 ipccoatings.com
11130 Twitty Dr. Contact: Marsha Parker
Rolla, MO 65401
Phone: 573-364-2722
Contact: George Dortch
hempel.us@hempel.com
hempel.us I Intercoastal Paint Co.
14029 W. Hardy Rd.
Houston, TX 77060
global@fidnet.com Heresite Protective Coatings, LLC IndMar Coatings Corporation Phone: 281-448-5258
822 South 14th St. 317 W. Main St. Contact: Heidi Moehle
Goodwest Linings and Coatings Manitowoc, WI 54220 Wakefield, VA 23888 heidi@intercoastalpaint.com
8814 Industrial Ln. Phone: 920-684-6646 Phone: 757-899-3807 intercoastalpaint.com
Rancho Cucamonga, CA 91730 Contact: Jim Madden Contact: Wilmer Rowe
Phone: 951-236-7576 sales@heresite.com indmar@earthlink.net International Cellulose Corporation
Contact: Patrick Sears heresite.com indmarcoatings.com 12315 Robin Blvd.
psears@goodwestlining.com Houston, TX 77045
goodwestlining.com Hi-Tech Concrete Coatings, Inc. Induron Coatings, Inc. Phone: 800-444-1252
430 Oak Lane 3333 R. Arrington Jr. Blvd. N. Contact: Chuck Smith/Joey Dickey
Grace Distributing Lititz, PA 17543 Birmingham, AL 35234 icc@spray-on.com
232 Molasses Lane Phone: 717-664-4006 Phone: 800-324-9584 spray-on.com
Mount Pleasant, SC 29464 Contact: Brian A. Sunday info@induron.com
Phone: 434-825-1529 desiree@hitech-coatings.com induron.com International Chem-Crete Corp.
Contact: John Griffin hitech-coatings.com 800 Security Row
jgriffin@gracedistributing.com Industrial Coatings & Sealants Richardson, TX 75081
gracedistributing.com 12521 Evergreen Dr., Ste. B Phone: 972-671-6477
Mukilteo, WA 98275 Contact: Jay Stine
Phone: 425-742-5693 clint@chem-crete.com
Contact: Greg Tadie chem-crete.com
gtadie@coatingsandsealants.com
coatingsandsealants.com
Company Profiles
Contact: John Broom Contact: Owen T. Priest Linabond Micor Company, Inc.
info@ipasystems.com solutions@kcchouston.com 1161 Avenida Acaso 3232 N. 31st Street
ipasystems.com kcccontrol.com Camarillo, CA 93012 Milwaukee, WI 53216
Phone: 805-484-7373 Phone: 800-284-4308
IPS Polymers Systems Kelly-Moore Paint Company Contact: Georgia Dreifus Contact: Bill Siefert
8530 Milliken Ave. 987 Commercial Street info@linabond.com micorox@sbcglobal.net
Rancho Cucamonga, CA 91730 San Carlos, CA 94070 linabond.com micorco.com
Phone: 909-941-4999 Phone: 800-874-4436
Contact: Amy Edwards Contact: Rusty Martindale Liquid Metal Coatings, LLC Midsun Group, Inc.
sales@ipspolymer.com epatricio@kellymoore.com 7015 W. 16th Ave. 135 Redstone Street
ipspolymer.com kellymoore.com Lakewood, CO 80215 Southington, CT 06480
Phone: 303-202-2042 Phone: 860-378-0100
Isolatek International KEMA Coatings LImited Contact: Bob Scheck Contact: Andy Tirado
41 Furnace Street Unit 904 - 60 Wyndham St. South liquidmetalcoatings.com info@midsungroup.com
Stanhope, NJ 07874 Guelph, ON N1E 7H7 Canada midsungroup.com
Phone: 973-347-1200 Phone: 519-826-9374 Lone Star Specialties, LLC
Contact: Sean Canfield Contact: Mark Gibson 6412 US Hwy. 259 South Milamar Coatings, LLC
scanfield@isolatek.com info@4pipelines.com Lone Star, TX 75668 311 NW 122nd St. Ste. 100
isolatek.com 4pipelines.com Phone: 903-656-2536 Oklahoma City, OK 73114
Contact: Tony Thigpen Phone: 405-755-9956
ITW Polymers Coatings North America Kemper System America, Inc. lonestarspecialties.net Contact: Duane Stingley
130 Commerce Drive 1 Reuten Drive milamar@casspolymers.com
Montgomeryville, PA 18936 Closter, NJ 07624 Lonza milamar.com
Phone: 215-855-8450 Phone: 800-541-5455 1200 Bluegrass Lakes Parkway
info@itwcoatings.com Contact: James Waddell Alpharetta, GA 30004
itwcoatings.com jwaddell@kempersystem.net Phone: 800-523-7391
kempersystem.net materialsprotection@lonza.com
lonza.com
Company Profiles
Neogard
2728 Empire Central
O The Platt Brothers & Company
PO Box 1030
Waterbury, CT 06721
Polyval Coatings
520 Boul Cure Boivin
Boisbriand, QC H3S 2N6 Canada
Dallas, TX 75235 Oak Ridge Chemical and Equipment Phone: 203-753-4194 Phone: 800-465-0905
Phone: 214-353-1689 575 Commercial Ave. Contact: David Berardinelli Contact: Marc Schondorf
Contact: Bob Coleman Green Lake, WI 54941 info@plattbros.com sales@polyvalcoatings.com
sales@neogard.com Phone: 800-625-9577 plattbros.com polyvalcoatings.com
neogard.com Contact: Jed Stellmacher
info@oakridgepoly.com Plexi-Chemie, Inc. PPC Coatings (MTR)
NIC Industries oakridgepoly.com 606 Lane Ave. North Ste. 6 2 Pixie Road
7050 6th Street Jacksonville, FL 32043 Wilmington, DE 19810
White City, OR 97503 OCM-Adeka Phone: 904-693-8800 Phone: 877-588-2227
Phone: 541-826-1922 1215 Henri Dr. Contact: Elizabeth Sicilia Contact: Cliff Narunsky
Contact: Jeff Scheid Wauconda, IL 60084 esicilia@plexi-chemie.com ppc@ppccoatings.com
jeff@nicindustries.com Phone: 866-457-5710 plexi-chemie.com ppccoatings.com
nicindustries.com Contact: Mike Leginski
mleginski@ocm-inc.com Polar Industries PPG Hi-Temp Coatings
Normac Adhesive Products, Inc. adeka.com PO Box 293 One PPG Place
1350 Heine Court Fisher Branch, MB R0C 0Z0 Canada Pittsburgh, PA 15272
Burlington, ON L7L 6M4 Canada Phone: 786-955-4008 Phone: 978-635-1110
Phone: 905-332-6455
Contact: George MacGregor
george@normacadhesives.com
P Contact: Lillian Peterson
polarindustry@yahoo.com
polarindustries.net
Contact: Ronald Li
ronald.li@ppg.com
hitempcoatings.com
normacadhesives.com Pacific Southwest Coatings
18220 Watson Way Polibrid Coatings, Inc. PPG Protective & Marine Coatings
Northern Industries Inc. Yorba Linda, CA 92886 6700 F.M. 802 One PPG Place
429 Tiogue Ave. Phone: 714-225-3688 Brownsville, TX 78526 Pittsburgh, PA 15272
Coventry, RI 02816 Contact: Laurence Miller Phone: 956-831-7818 Phone: 888-897-7476
Phone: 401-821-2121 nyemiller@pacificsouthwest.net Contact: Klaus D. Meyer Contact: Steve Feldman
Contact: Rick Bernard pacificsouthwest.net klaus@polibrid.com pmcmarketing@ppg.com
rick@northerncoatings.com polibrid.com ppgpmc.com
northerncoatings.com See our display ad, p. 111.
Company Profiles
Company Profiles
Company Profiles