Anda di halaman 1dari 1

D i s t r i b u t o r

D a t a S h e e t Renault DPO, Citroën AL-4


PART NUMBER 120940-01K, F-120940-TL

COMPLAINT
SECONDARY COMPLAINTs
Pressure regulation codes, Default mode
• Loss of drive when hot • Pressure sensor reading low • Valve body mis-calibrated

Cause
Pressure regulator and plunger valves
and bores show significant wear.
Oversized Plunger Valve

COrrection Oversized Pressure


Sonnax has designed an oversized valve Regulator Valve
that restores OE normal line pressure
and shift concerns.
Custom Pressure
Oversized Regulator Spring

Pressure
Regulator Valve Tool Kit
Repair Kit F-120940-TL

120940-01K TOOL

1 Oversized PR Valve R Threaded Plastic Plug


D

EQ
UIRE
1 Oversized Plunger Valve
1 Custom Pressure Regulator Spring

F-120940-TL Sonnax Part Summary


2 Reamers Excessive OE plunger valve and bore wear results in high line pressure conditions. Excessive wear
2 Reamer Guides of the OE pressure regulator valve and bore may cause low, high or unstable line pressure issues.
1 Guide Pin When installed, the Sonnax pressure regulator valve repair kit, 120940-01K, restores correct pressure
regulator and plunger valve operation to provide appropriate line pressure for all operating conditions.

Features & Benefits


• Salvages otherwise scrap DPO/AL4 valve bodies for reuse.
• Restores nominal OE line pressure and eliminates related shift problems.
• Hard anodized aluminum valves resist wear.
You need 120940-01K if...
Key: Vacuum or WAT where indicated
by a “Lettered” arrow and check results Vacuum tests at the ports indicated (A, B, C & D) do not hold 18" or if a Wet Air Test at the same
by the corresponding “Lettered” spray. locations result in leaking at the corresponding ports.

B C

D
A D
D A

B C
Case Plate
Side Side

©2009 Sonnax Industries, Inc. 120940-01K Rev:-, 120940-01K 02-11-09


800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com • info@sonnax.com

Anda mungkin juga menyukai