14. What is ideal inclination of a horizontal waste pipe as recommended by the National Plumbing Code?
a. 2% c. 3%
b. 4% d. 5%
15. A plumber needs to bend copper tubing without kinking it. Unfortunately, his pipe bender breaks. What is the
best thing to do?
a. Buy a new pipe bender c. Bend the copper tubing slowly by hand
b. Expose the copper to heat d. Borrow a pipe bender to Stock Manager
16. Which tool is appropriate for tightening and loosening pipe?
a. Flux c. Pipe cutter
b. Pipe wrench d. Plunger
17. Which pipe is used through which rainwater passes from the roof down to the ground?
a. Vent c. Downspout
b. Gutter d. Storm drain
18. What does plumbing ventilation mean?
a. Giving pressure differentials in the public sewer
b. Carrying server gas out and relieving pressure of the drainage system
c. Discouraging corrosion in the drainage piping
d. Maintaining the trap seal from the drainage system
19. The National Plumbing Code on soil provides, at least, one of the vertical stacks in the plumbing system that
extends full size through the roof for the following purposes EXCEPT one. Which is it?
a. To prevent the possibility of back sewage which may force the water seal, off the fixture trap.
b. To prevent and dispose of the sewage gas above the roof.
c. To enhance siphoning of the water
d. To prevent siphoning of the water trap seal by force or suction
20. When a sink clogs up, the problem is usually due to the blockage in the
a. J-bend c. Waste pipe
b. Tail pipe d. P-trap
Direction: Pick a word inside the box that best describes each item.
Storm drain Ventilation Soil pipe Waste pipe
Test III.
Test IV.
Draw or Make a plan for the installation of two (2) Urinals, one (1) Lavatory and one (1) for Water
Closet. List down all materials and tools needed for installation.