ERouting Instructor Manual

09/09/2010 ERouting Instructor Manual
Scribd
Explore
Community
Upload a Document
Search Books, Presentations, Business, Academics...
Login
jeruxevil
My Home
View Public Profile
My Documents
My Collections
Messages
Settings
Help
Log Out
scribd.com/…/ERouting-Instructor-Manual 1/275
CCNA Exploration
Routing Protocols and Concepts:
Introduction to Routing and Packet Forwarding Lab 1.5.2: Basic Router Configuration
Step 3: Attempt to ping from the host connected to R2 to router R1.

This ping should be unsuccessful.
What is missing from the network that is preventing communication between these devices?
________________________________________________________________________________
________________________________________________________________________________
After reading the chapter text, the student should be able to state that this network is missing either static
or dynamic routing (or both!).
Task 8: Documentation
On each router, capture the following command output to a text (.txt) file and save for future reference.
• show running-config
• show ip route
• show ip interface brief
If you need to review the procedures for capturing command output, refer to Lab 1.5.1, “Cabling a
Network and Basic Router Configuration.”
Task 9: Clean Up
Erase the configurations and reload the routers. Disconnect and store the cabling. For PC hosts that are
normally connected to other networks (such as the school LAN or to the Internet), reconnect the
appropriate cabling and restore the TCP/IP settings.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 9
Lab 1.5.3: Challenge Router Configuration (Instructor Version)
Topology Diagram
Addressing Table
Device Interface IP Address Subnet Mask Default Gateway
Fa0/0 192.168.1.33 255.255.255.224 N/A

R1
S0/0/0 192.168.1.65 255.255.255.224 N/A
Fa0/0 192.168.1.97 255.255.255.224 N/A
R2
S0/0/0 192.168.1.94 255.255.255.224 N/A
PC1 NIC 192.168.1.62 255.255.255.224 192.168.1.33
PC2 NIC 192.168.1.126 255.255.255.224 192.168.1.97
Learning Objectives
Upon completion of this lab, you will be able to:
• Subnet an address space given requirements.
• Assign appropriate addresses to interfaces and document.
• Cable a network according to the Topology Diagram.
• Erase the startup configuration and reload a router to the default state.
• Perform basic configuration tasks on a router.
• Configure and activate Serial and Ethernet interfaces.
• Test and verify configurations.
• Reflect upon and document the network implementation.
Scenario
In this lab activity, you will design and apply an IP addressing scheme for the topology shown in the
Topology Diagram. You will be given one class C address that you must subnet to provide a logical
addressing scheme for the network. You must first cable the network as shown before the configuration
can begin. Once the network is cabled, configure each device with the appropriate basic configuration
commands. The routers will then be ready for interface address configuration according to your IP
addressing scheme. When the configuration is complete, use the appropriate IOS commands to verify
that the network is working properly.
CCNA Exploration
Introduction to Routing and Packet Forwarding Lab 1.5.3: Challenge Router Configuration
Task 1: Subnet the Address Space.
Step 1: Examine the network requirements.

You have been given the 192.168.1.0/24 address space to use in your network design. The network
consists of the following segments:
• The network connected to router R1 will require enough IP addresses to support 20 hosts.
• The link between router R1 and router R2 will require IP addresses at each end of the link.
Step 2: Consider the following questions when creating your network design.
How many subnets are needed for this network? ____________________
3
What is the subnet mask for this network in dotted decimal format? ____________________
255.255.255.224
What is the subnet mask for the network in slash format? ____________________
/27
How many usable hosts are there per subnet? ____________________

30
Step 3: Assign subnetwork addresses to the Topology Diagram.

1. Assign subnet 1 to the network attached to R1.
2. Assign subnet 2 to the link between R1 and R2.
3. Assign subnet 3 to the network attached to R2.
Task 2: Determine Interface Addresses.
Step 1: Assign appropriate addresses to the device interfaces.

1. Assign the first valid host address in subnet 1 to the LAN interface on R1.
2. Assign the last valid host address in subnet 1 to PC1.
3. Assign the first valid host address in subnet 2 to the WAN interface on R1.
4. Assign the last valid host address in subnet 2 to the WAN interface on R2.
5. Assign the first valid host address in subnet 3 to the LAN interface of R2.
6. Assign the last valid host address in subnet 3 to PC2.
Step 2: Document the addresses to be used in the table provided under the Topology Diagram.
Task 3: Prepare the Network
Step 1: Cable a network that is similar to the one in the Topology Diagram.
You can use any current router in your lab as long as it has the required interfaces as shown in the
topology.
CCNA Exploration
Step 2: Clear any existing configurations on the routers.
Task 4: Perform Basic Router Configurations.

Perform basic configuration of the R1 and R2 routers according to the following guidelines:
1. Configure the router hostname.
2. Disable DNS lookup.
3. Configure an EXEC mode password.
4. Configure a message-of-the-day banner.
5. Configure a password for console connections.
6. Configure a password for VTY connections.
Task 5: Configure and Activate Serial and Ethernet Addresses.
Step 1: Configure the router interfaces.

Configure the interfaces on the R1 and R2 routers with the IP addresses from your network design. When
you have finished, be sure to save the running configuration to the NVRAM of the router.
Step 2: Configure the PC interfaces.

Configure the Ethernet interfaces of PC1 and PC2 with the IP addresses and default gateways from your
network design.
Task 6: Verify the Configurations.

Answer the following questions to verify that the network is operating as expected.
From the host attached to R1, is it possible to ping the default gateway? __________
From the router R1, is it possible to ping the Serial 0/0/0 interface of R2? __________
From the router R2, is it possible to ping the Serial 0/0/0 interface of R1? __________
Answers: All answers should be yes.
The answer to the above questions should be yes. If any of the above pings failed, check your physical
connections and configurations. If necessary, refer to Lab 1.5.2, “Basic Router Configuration.”
What is the status of the FastEthernet 0/0 interface of R1? _____________
What is the status of the Serial 0/0/0 interface of R1? _____________
What is the status of the FastEthernet 0/0 interface of R2? _____________
What is the status of the Serial 0/0/0 interface of R2? _____________

All interfaces should be up and up.
CCNA Exploration
What routes are present in the routing table of R1?

__________________________________________________________________________
__________________________________________________________________________
C 192.168.1.64 is directly connected, Serial0/1/0
C 192.168.1.32 is directly connected, FastEthernet0/0
What routes are present in the routing table of R2?

__________________________________________________________________________
__________________________________________________________________________
C 192.168.1.96 is directly connected, FastEthernet0/0
C 192.168.1.64 is directly connected, Serial0/0/0
Task 7: Reflection
Are there any devices on the network that cannot ping each other?
__________________________________________________________________________
__________________________________________________________________________
R1 cannot ping the FastEthernet interface on R2. R1 cannot ping the FastEthernet interface on R2. PC1
cannot ping PC2. PC2 cannot ping PC1.
What is missing from the network that is preventing communication between these devices?
__________________________________________________________________________
__________________________________________________________________________
After reading the chapter text, the student should be able to state that this network is missing either static
or dynamic routing (or both!).
Task 8: Document the Router Configurations.

On each router, capture the following command output to a text (.txt) file and save for future reference.
• Running configuration
• Routing table
• Summary of status information for each interface
1.6.1: Packet Tracer Skills Integration Challenge Activity (Instructor

Version)
Topology Diagram
Addressing Table
Device Interface IP Address Subnet Mask Default Gateway
Fa0/0 192.168.1.129 255.255.255.192 N/A

HQ S0/0/0 192.168.1.225 255.255.255.252 N/A
S0/0/1 192.168.1.229 255.255.255.252 N/A
Fa0/0 192.168.1.1 255.255.255.128 N/A
B1
S0/0/0 192.168.1.226 255.255.255.252 N/A
Fa0/0 192.168.1.193 255.255.255.224 N/A
B2
S0/0/1 192.168.1.230 255.255.255.252 N/A
PC1 NIC 192.168.1.126 255.255.255.128 192.168.1.1
PC2 NIC 192.168.1.190 255.255.255.192 192.168.1.129
PC3 NIC 192.168.1.222 255.255.255.224 192.168.1.193
ERouting Instructor Manual

Reads:
6,038
Uploaded:
02/24/2010
Category:
Uncategorized.
Tags:
ccna exploration
challenge router
router configuration
answer
(More)
Rated:
Download this Document for FreePrintMobileCollectionsReport Document

This is a private document.
krystian85
Like 71 people like this. Be the first of your friends.
Ads by Google
Phihong Midspans, PoE
In Stock, Free Shipping,
Reseller Discounts, Authorized Dist
www.wirelessnetworkproducts.com
Cisco 3725 Router $439

We Buy/Sell Used Cisco Gears
Great Prices with 1 Year Warranty
tnetus.com
Router Monitoring
Software for monitoring router
performance. Windows Software.
www.Paessler.com
Sign Up for an Ad-Free Scribd

Remove all ads.
Never see ads on Scribd again.
No Thanks
Share & Embed
Link / URL: http://www.scribd.com/doc/27405027/ERouting-Instructor-Manual

Embed Size & Settings:
Width: (auto) Auto
Height: 300
Start on page: 1
Preview View: Scroll
<a title="View ERouting Instructor Manual on Scribd" href="http://www.scribd.com/doc/27405027/ERouting-Instructor-Manual" style="margin: 12px auto 6px
Related
1. 312 p.
"requires a Static Route for Traff...
Reads: 0
352 p.
CCNA 2 - Routing Protocols And
Reads: 0
352 p.
CCNA 2 - Routing Protocols and Con...
Reads: 1729
2. 352 p.
Ccn2 Lab 10.3.1 Packet Tracer Solu...
Reads: 10615
296 p.
Cisco Academy - Routing Protocols ...
Reads: 0
350 p.
26500347-Lab-Manual
Reads: 0
3. 588 p.
Network 202 Notes
Reads: 4691
350 p.
En ERouting SLM v401
Reads: 422
350 p.
Reads: 96
4. 350 p.
Lab Manual
Reads: 1267
9 p.
CCNA Discovery Lab 8.3.2 Answers
Reads: 15807
21 p.
A Static Route Has Been Configured...
Reads: 8975
5. 9 p.
Basic Router Configuration
Reads: 0
12 p.
Ccna 2 Final New Version July2009
Reads: 0
9 p.
Lab Basic router Configuration
Reads: 1210
6. 11 p.
Lab 3
Reads: 0
20 p.
Lab
Reads: 0
498 p.
Topology P A U Q R
Reads: 0
7. 20 p.
Basic Routing
Reads: 243
12 p.
What Will router R1 do with A Pack...
Reads: 9007
70 p.
Planning and Access for Diabled Pe...
Reads: 0
8. 1 p.
LID:RYN - ALMON ONE (RNAV) (OBSTAC...
Reads: 0
1 p.
LID:SGJ - VOR RWY 13 (1009)
Reads: 0
1 p.
LID:DTW - ILS Z OR LOC RWY 22R (10...
Reads: 0
9. 41 p.
Bacula FOSDEM Talk 25Feb07
Reads: 0
More from this user

1. 336 p.
Exploration Routing Semester 2
From: krystian85
Reads: 926
65 p.
Exploration Routing Chapter 9
From: krystian85
Reads: 184
350 p.
From: krystian85
Reads: 675
2. 187 p.
Exploration LAN Switching Semes...
From: krystian85
Reads: 472
4 p.
CCNA Exploration: LAN Switching...
From: krystian85
Reads: 123
4 p.
Exploration Routing: OSPF Skill...
From: krystian85
Reads: 3,674
3. 365 p.
ERouting Instructor Manual
From: krystian85
Reads: 6,032
201 p.
En ESwitching SLM v40
From: krystian85
Reads: 331
262 p.
En ESwitching ILM v40
From: krystian85
Reads: 2,285
4. 350 p.
From: krystian85
Reads: 157
212 p.
Exploration Accessing WAN Semes...
From: krystian85
Reads: 1,364
180 p.
en_EWAN_SLM_v40
From: krystian85
Reads: 2,468
5. 791 p.
Testking v22 Ccna 640-802
From: krystian85
Reads: 1,219
106 p.
17278724-TestInside-640802-v350
From: krystian85
Reads: 729
482 p.
Cisco Receptury.Pl
From: krystian85
Reads: 144
Add a Comment
Submit
jeruxevil readcast this 37 minutes agoLearn more about Readcast.

antfirex readcast this 2 days agoLearn more about Readcast.
Jose_Luis_Mora_641 readcast this 3 days agoLearn more about Readcast.
Hafid_El_Azouz_8311 readcast this 4 days agoLearn more about Readcast.
Hafid_El_Azouz_8311 readcast this 4 days agoLearn more about Readcast.
glenjiehan readcast this 6 days agoLearn more about Readcast.
wwwdotscribddotcom readcast this 09 / 02 / 2010Learn more about Readcast.
mejia.klaus2952 readcast this 09 / 01 / 2010Learn more about Readcast.
soccr_14 readcast this 09 / 01 / 2010Learn more about Readcast.
abc123killer readcast this 09 / 01 / 2010Learn more about Readcast.
Upload a Document
Search Books, Presentations, Business, Academics...
Scribd
About
Press
Jobs
Contact
Blog
Scribd Store
Legal
Terms - General
Terms - API
Terms - Privacy
Copyright
Help & Tools
Getting Started
Community Guidelines
Support & FAQ
Web Stuff
Partners
Partners
Branded Reader
Developers / API
Subscribe to Us
On Scribd
On Twitter
On Facebook
What's New
We have updated our Terms of Service

Branded Reader
Desktop Uploader

ERouting Instructor Manual

Diunggah oleh

Informasi Dokumen

Hak Cipta

Format Tersedia

Bagikan dokumen Ini

Bagikan atau Tanam Dokumen

Opsi Berbagi

Apakah menurut Anda dokumen ini bermanfaat?

Apakah konten ini tidak pantas?

Hak Cipta:

Format Tersedia

ERouting Instructor Manual

Diunggah oleh

Hak Cipta:

Format Tersedia

09/09/2010 ERouting Instructor Manual

Step 3: Attempt to ping from the host connected to R2 to router R1.

Lab 1.5.3: Challenge Router Configuration (Instructor Version)

Device Interface IP Address Subnet Mask Default Gateway

Fa0/0 192.168.1.33 255.255.255.224 N/A

Task 1: Subnet the Address Space.

Step 1: Examine the network requirements.

How many usable hosts are there per subnet? ____________________

Step 3: Assign subnetwork addresses to the Topology Diagram.

Task 2: Determine Interface Addresses.

Step 1: Assign appropriate addresses to the device interfaces.

Task 3: Prepare the Network

Step 2: Clear any existing configurations on the routers.

Task 4: Perform Basic Router Configurations.

Task 5: Configure and Activate Serial and Ethernet Addresses.

Step 1: Configure the router interfaces.

Step 2: Configure the PC interfaces.

Task 6: Verify the Configurations.

What is the status of the FastEthernet 0/0 interface of R1? _____________

What is the status of the Serial 0/0/0 interface of R1? _____________

What is the status of the FastEthernet 0/0 interface of R2? _____________

What is the status of the Serial 0/0/0 interface of R2? _____________

What routes are present in the routing table of R1?

What routes are present in the routing table of R2?

Task 8: Document the Router Configurations.

1.6.1: Packet Tracer Skills Integration Challenge Activity (Instructor

Device Interface IP Address Subnet Mask Default Gateway

Fa0/0 192.168.1.129 255.255.255.192 N/A

ERouting Instructor Manual

Download this Document for FreePrintMobileCollectionsReport Document

Cisco 3725 Router $439

Sign Up for an Ad-Free Scribd

Share & Embed

Link / URL: http://www.scribd.com/doc/27405027/ERouting-Instructor-Manual

"requires a Static Route for Traff...

CCNA 2 - Routing Protocols And

CCNA 2 - Routing Protocols and Con...

Ccn2 Lab 10.3.1 Packet Tracer Solu...

Cisco Academy - Routing Protocols ...

Network 202 Notes

En ERouting SLM v401

En ERouting SLM v401

CCNA Discovery Lab 8.3.2 Answers

A Static Route Has Been Configured...

Basic Router Configuration

Ccna 2 Final New Version July2009

Lab Basic router Configuration

What Will router R1 do with A Pack...

LID:RYN - ALMON ONE (RNAV) (OBSTAC...

LID:SGJ - VOR RWY 13 (1009)

LID:DTW - ILS Z OR LOC RWY 22R (10...

Bacula FOSDEM Talk 25Feb07

More from this user

Exploration Routing Semester 2

Exploration Routing Chapter 9

En ERouting SLM v401

Exploration LAN Switching Semes...

CCNA Exploration: LAN Switching...

Exploration Routing: OSPF Skill...

ERouting Instructor Manual

En ESwitching SLM v40

En ESwitching ILM v40

En ERouting SLM v401

Exploration Accessing WAN Semes...