The attached book list is intended solely as a guide and should not be considered as a
mandatory requirement. Books listed under Section A may be valuable as reading prior to
entering the Masters Course and for general background work. Books listed in Section B are
particularly relevant for Masters Course students in Aerospace Vehicle Design. Those in
Section C are specialist works and clearly their value will be directly related to Masters and
Doctoral research work.
Books marked with * are particularly recommended for general interest.
OR KREYZIG, E.
Advanced Engineering Mathematics. New York, Wiley, 2005.
SPIEGEL, M.R.
Statistics. New York, McGraw-Hill, 1972. (Schaum's Outline Series).
ELLIS, T.M.R.
Structured FORTRAN. University of Sheffield Computing Services, 1980.
*DUGGAN, T.V.
Fatigue as a Design Criteron. London, Macmillan, 1979
.
*A General Introduction to Fracture Mechanics. Bury St. Edmunds, Mech. Eng. Publications,
1978
OR KNOTT, J.F.
Fundamentals of Fracture Mechanics. London, Butterworth, 1973.
*THOMSON, W.T.
Theory of vibration with application. 4th ed. London, Allen & Unwin, 1993
.
*MEGSON, T.H.G.
Aircraft Structures for Engineering Students. London, Edward-Arnold, 1999
(also available electronically in Cranfield Main Library).
TSAI
Strength and Life of Composites
STROUD, K.A
‘Engineering Mathematics
B ADDITIONAL BOOKS
FIELDING, J. P.
Introduction to Aircraft Design, Cambridge University Press, 1999
STRIBLING, C.B.
Basis Aerodynamics. London, Butterworths, 1984.
ALLEN, J.E.
Aerodynamics - the science of air in motion. 3rd ed. London, Granada, 1986.
*STINTON, D.
The Design of the Aeroplane. 2nd ed. London, Granada, 2001.
CUTLER, J.
Understanding Aircraft Structures. 2nd ed. London, Granada, 1992
(3rd edition available electronically in Cranfield Main Library).
SEDDON, J.
Basic Helicopter Aerodynamics: 2nd ed. Oxford, BSP Professorial Books, 2001.
ROARK, R.J.
Formulas for Stress and Strain, 7th ed., New York, McGraw-Hill, 2002.
(also available electronically in Cranfield Main Library).
WILKINSON, R.
Aircraft Structures and Systems: An Introduction, 2nd ed. Addison-Wesley Longman Higher
Education. 2001.
OR JONES, R.M.
Mechanics of Composite Materials. 2nd ed. New York, McGraw-Hill, 1999.
*TORENBEEK, E.
Synthesis of Subsonic Aircraft Design. (Martinus Nijhof), Delft University Press, 1982.
BABISTER, A.W.
Aircraft Dynamic Stability and Response. Oxford, Pergamon Press, 1980.
BRAMWELL, A.W.S.
Helicopter Dynamics. 2nd ed. London, Arnold, 2001.
BRUHN, E.F.
Analysis and Design of Flight Vehicle Structures. Cincinnati, Ohio, Tristate Offset Co., 1973.
WHITFORD, R.
Design for Air Combat, London, Jane's Publishing Co Ltd. 1987.
ANDERSON, J.D.
Introduction to Flight, 5th ed. McGraw-Hill Book Co. 2005.
BROWN, D.K.
An Introduction to the Finite Element Method using Basic Programs 2nd Edition, Surrey Univ
Press, 1990.
ROSKAM, J.
Airplane Design Series, Part I-VIII, Roskam Aviation and Engineering Corporation, 1989.
NEESE W.A.
Aircraft Hydraulic Systems, 3rd ed. Pitman Publishing Ltd, 1991.
PALLETT, E.H.J.
Aircraft Electrical Systems, Longman Scientific & Technical, 3rd Edition, 1987.
RAYMER, D.P.
Aircraft Design: A Conceptual Approach, 3rd ed. American Institute of Aeronautics and
Astronautics, 1999.
CURTIS, M.
Aircraft Structural Analysis, McGraw-Hill, 1997.
SPITZER, CARY R.
The Avionics Handbook, CRC Press, 2001.
COLLINSON, R.P.G.
Introduction to Avionics, Chapman and Hall, 1997.
HELFRICK, A.
Principles of Avionics. Avionics Communications Inc., 2000.
FRENZEL, L
Principles of Electronic Communication Systems, McGraw-Hill Education, 2002
MIDDLETON,D
Avionic Systems, Longman, 1989.
SKOLNIK, M
Introduction to Radar Systems, McGraw-Hill Education, 2003.
LAWRENCE, A
Modern Inertial Technology, 2nd, Springer, 1998
MAYBECK P. S.
Stochastic Models, Estimation and Control, Vol 1 and 2, Academic Press, 1979
ROGERS R. M.
Applied Mathematics in Integrated Navigation Systems, AIAA, 2000
GREWALM. S.et al
Global Positioning Systems, Inertial Navigation and Integration, John Wiley & Sons, Inc,
2001
IEEE Trans. on Aerospace Electronics System, IEEE PLANS, ION Journal, ION Meetings
JUKES, M.
Aircraft Display Systems, AIAA, 2004
BARNES J.
Programming in ADA95, Addison-Wesley, 1998.
JOHNSON B. W.
Design and Analysis of Fault-Tolerant Digital Systems, Addison-Wesley Publishing
Company, 1989
TORRES-POMALES W.
Software Fault Tolerance: A Tutorial, NASA/TM-2000-210616
LYU M. R.
Software Fault Tolerance, John Wiley & Sons, Inc, 1991
NOLAN M. S.
Air Traffic Control, Wadsworth Publishing Company, 1993 (or new version)
JANIA M.
Air Transport System Analysis and Modelling, Gordon and Breach Science Publishers, 2000.
VILLEMEUR M.
Reliability, Availability, Maintainability and Safety Assessment, Vol.1 John Wiley, 1992
E CONTROL SYSTEMS
OGATA K.
‘Solving Control Engineering Problems with MATLAB’ Prentice Hall
KUO, B.C.
‘Automatic Control Systems’ 8th Edition, Wiley
NISE, N.S.
‘Control Systems Engineering with CD’, 4th Edition, Wiley
OGATA, K.
‘System Dynamics’ 4th Edition, Pearson Prentice Hall, 2004
THOMPSON, S.
‘Control Systems Engineering and Design’ New York, Longmans 1989