es D
k ag ZE
c I
Pa GN 9
d
c te O 63
e le EC E71
S
.R e#
U .L Fil
TO - 92
THERMOTAB
TO-220AB
TO-202AB A K
Sensitive SCRs
(0.8 – 10 Amps)
5
General Description
The Teccor Electronics, Inc. line of sensitive SCR semiconduc- Tape-and-reel packaging is available for the TO-92 package.
tors are half-wave unidirectional gate-controlled rectifiers (SCR- Please consult factory for more information.
thyristor) which complement Teccor's line of power SCRs. This Variations of devices covered in this data sheet are available for
group of packages offers ratings of 0.8-10 amps, and 50-600 custom design applications. Please consult the factory for more
volts with gate sensitivities of 12-500 microamps. If gate currents information.
in the 10-50 milliamp ranges are required, please consult Tec-
cor's non-sensitive SCR technical data sheets.
Amps
Amps Volts Watts Watts 60Hz 50Hz Volts/µSec Amps/µSec µSec µSec Amps2/Sec
MIN MIN TYP MAX
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 30 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 20 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 15 50 3.5 50 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 15 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 10 50 2.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 20 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 10 50 3.0 60 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 30 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 20 50 5.0 45 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 30 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 20 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 15 50 4.0 30 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 40 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 30 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 20 50 5.0 18 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 5.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 25 50 2.2 60 1.6
1.0 6.0 1.0 0.1 20 16 75 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 75 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 60 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 40 50 3.5 50 1.6
1.0 6.0 1.0 0.1 20 16 30 50 3.5 50 1.6
See General Notes and Electrical Specifications Notes on page 5-4.
Part
Number VDRM & IDRM &
Non-Isolated IT VRRM IGT IRRM VTM VGT IH IGM
Maximum Repetitive DC Gate Peak Off-State Peak DC Gate DC Holding Peak Gate
On-State Peak Trigger Current at On-State Trigger Voltage Current Current
A
Current Off-State Current VDRM & VRRM Voltage (4) (11) Initial On-State (16)
TYPE Forward & (2) (11) (13) TC = 25°C
(1) (19) Current = 20mA
Reverse (3) (10) (5) (15) (18)
Voltage
K G
A
General Notes (7) 0.8 - 4.0A devices also have a pulse peak forward current on-state
rating (repetitive) of 75A. This rating applies for operation at 60Hz,
• Teccor 2N5060 and 2N6564 Series devices conform to all JEDEC 75°C maximum tab (or anode) lead temperature, switching from
registered data. See specifications table on page 5-2. 80V peak, sinusoidal current pulse width of 10µs minimum, 15µs
maximum. See Figures 5.20 and 5.21.
• The case temperature (TC) is measured as shown on dimensional
(8) See Figure 5.15 for tgt vs IGT.
outline drawings. See “Package Dimensions” section of this
(9) Test conditions as follows:
catalog. TC ≤ 80°C, rectangular current waveform; rate-of-rise of current
• All measurements (except IGT) are made with an external resistor ≤ 10A/µs. Rate-of-reversal of current ≤ 5A/µs. ITM = 1A (50µs
RGK = 1kΩ unless otherwise noted. pulse) Repetition Rate = 60pps. VRRM = Rated. VR = 15V mini-
• All measurements are made at 60Hz with a resistive load at an mum, VDRM = Rated. Rate-of-rise reapplied forward blocking volt-
ambient temperature of +25oC unless otherwise specified. age = 5V/µs. Gate Bias = 0V, 100Ω (during turn-off time interval).
(10) Test condition is maximum rated RMS current except TO-92
• Operating temperature (TJ) is -65oC to + 110oC for “EC” Series
devices are 1.2APK; T106/T107 devices are 4APK.
devices; -65oC to +125oC for “2N” Series devices; -40oC to +125oC
(11) VD = 6VDC, RL = 100Ω. See Figure 5.19 for simple test circuit for
for “TCR” Series; and -40oC to +110oC for all others.
measuring gate trigger voltage and gate trigger current.
• Storage temperature range (TS) is -65oC to + 150oC for TO-92 (12) See Figures 5.1 through 5.9 for maximum allowable case temper-
devices; -40oC to +150oC for TO-202 devices; and -40oC to ature at maximum rated current.
+125oC for all others. (13) IGT = 500µA maximum for TC = -40°C for T106 devices.
• o
Lead solder temperature is a maximum of +230 C for 10 seconds (14) IH = 10mA maximum for TC = -65°C for 2N5060 Series and
maximum ≥ 1/16" (1.59mm) from case. 2N6564 Series devices.
(15) IH = 6mA maximum for TC = -40°C for T106 devices.
(16) Pulse Width ≤ 10µs.
Electrical Specification Notes (17) IGT = 350µA maximum at TC = -65°C for 2N5060 Series and
(1) See Figures 5.1 through 5.9 for current ratings at specified operat- 2N6564 Series devices.
(18) Latching current can be higher than 20mA for higher IGT types.
ing case temperatures.
Also latching current can be much higher at -40°C. See Figure
(2) See Figure 5.10 for IGT vs TC.
5.18.
(3) See Figure 5.11 for instantaneous on-state current (iT) vs on-state (19) TC = TJ for test conditions in off-state.
voltage (vT ) - (typical).
(4) See Figure 5.12 for VGT vs TC.
(5) See Figure 5.13 for IH vs TC.
(6) For more than one full cycle, see Figure 5.14.
TC = 110°C
Volts Watts Watts 60Hz 50Hz Amps/µSec µSec µSec Amps2Sec
General Notes • Storage temperature range (TS) is -65oC to + 150oC for TO-92
devices; -40oC to +150oC for TO-202 devices; and -40oC to
• Teccor 2N5060 and 2N6564 Series devices conform to all JEDEC +125oC for all others.
registered data. See specifications table on page 5-2.
• Lead solder temperature is a maximum of +230oC for 10 seconds
• The case temperature (TC) is measured as shown on dimensional maximum ≥ 1/16" (1.59mm) from case.
outline drawings. See “Package Dimensions” section of this
catalog.
• All measurements (except IGT) are made with an external resistor
RGK = 1kΩ unless otherwise noted.
• All measurements are made at 60Hz with a resistive load at an
ambient temperature of +25oC unless otherwise specified.
• Operating temperature (TJ) is -65oC to + 110oC for “EC” Series
devices; -65oC to +125oC for “2N” Series devices; -40oC to +125oC
for “TCR” Series; and -40oC to +110oC for all others.
Volts/µSec
Amps Volts Watts Watts Amps TC = 110°C Amps/ µSec µSec µSec Amps2Sec
MIN 60 Hz 50 Hz TYP TYP MAX
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 20 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 20 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 10 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 10 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
1.0 6.0 1.0 0.1 100 83 5 100 4.0 50 41
1.0 6.0 1.0 0.1 100 83 5 100 5.0 45 41
Electrical Specification Notes blocking voltage= 5V/µs. Gate Bias = 0V, 100Ω (during turn-off
time interval).
(1) See Figures 5.1 through 5.9 for current ratings at specified operat- (10) Test condition is maximum rated RMS current except TO-92
ing case temperatures. devices are 1.2APK; T106/T107 devices are 4APK.
(2) See Figure 5.10 for IGT vs TC. (11) VD = 6VDC, RL = 100Ω. See Figure 5.19 for simple test circuit for
(3) See Figure 5.11 for instantaneous on-state current (iT) vs on-state measuring gate trigger voltage and gate trigger current.
voltage (vT ) - (typical). (12) See Figures 5.1 through 5.9 for maximum allowable case temper-
(4) See Figure 5.12 for VGT vs TC. ature at maximum rated current.
(13) IGT = 500µA maximum for TC = -40°C for T106 devices.
(5) See Figure 5.13 for IH vs TC.
(14) IH = 10mA maximum for TC = -65°C for 2N5060 Series and
(6) For more than one full cycle, see Figure 5.14.
(7) 0.8 - 4.0A devices also have a pulse peak forward current on-state 2N6564 Series devices.
rating (repetitive) of 75A. This rating applies for operation at 60Hz, (15) IH = 6mA maximum for TC = -40°C for T106 devices.
75°C maximum tab (or anode) lead temperature, switching from (16) Pulse Width ≤ 10µs.
80V peak, sinusoidal current pulse width of 10µs minimum, 15µs (17) IGT = 350µA maximum at TC = -65°C for 2N5060 Series and
maximum. See Figures 5.20 and 5.21. 2N6564 Series devices.
(8) See Figure 5.15 for tgt vs IGT. (18) Latching current can be higher than 20mA for higher IGT types.
(9) Test conditions as follows: Also latching current can be much higher at -40°C. See Figure
TC ≤ 80°C, rectangular current waveform; rate-of-rise of current ≤ 5.18.
10A/µs. Rate-of-reversal of current ≤ 5A/µs. ITM = 1A (50µs pulse) (19) TC = TJ for test conditions in off-state.
Repetition Rate = 60pps. VRRM = Rated.
VR = 15V minimum, VDRM = Rated. Rate-of-rise reapplied forward
130
THERMAL RESISTANCE (STEADY STATE)
100
JEDEC "2N" SERIES
90
80
TO-92 THERMOTAB TYPE 2 TO- TYPE 1 & 3
"EC" SERIES
TO-220AB 202AB TO-202AB 70
Electrical Isolation
Teccor’s isolated sensitive SCRs will withstand a minimum high 130
potential test of 2500 VAC RMS from leads to mounting tab over 120
CURRENT WAVEFORM: Sinusoidal
100
T1 T10
90 06 6&
&T T10
ELECTRICAL ISOLATION 107
TY
7 TY
PE
1&
FROM LEADS TO MOUNTING TAB 80 PE
2 &4
3
70 1.5
DE
VIC
60 ES
50
VAC(RMS)
40
2.6
0 .5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
TO-220AB
2500 Standard
Figure 5.2 Maximum Allowable Case Temperature vs RMS On-State
4000 Optional* Current (T106 and T107)
*For 4000V Isolation use “V” Suffix in part number
**UL Recognized File #E71639
Maximum Allowable Case Temperature (TC) - ˚C
130
CURRENT WAVEFORM: Sinusoidal
120 LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180˚
110 CASE TEMPERATURE: Measured
JD
100
"2
N"
"E
SE
C"
90 SE
RI
RI
ES
ES
80
70
60
50
0.51
0 0.2 0.4 0.6 0.8 1.0 1.2
Average On-State Current [IT(AV)] - Amps
T1
T10
06 6&
T1
0
&T T10
6/
90
06
10 7T
T1
7T YPE
/T
1&
0
YP 80
10
7
80 E2 3
TO
7T
&4
-2
1.5
O-
02
70
20
D
60
TY
EV
2T
P
60
ICE
E
YP
1
S
&
50 40
3
2&
4
40
0.95 1.65 1.9 2.54
0 0.5 1.0 1.5 2.0 2.5 3.0 20
Average On-State Current [IT(AV)] - Amps 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Average On-State Current [IT(AV)]- Amps
Figure 5.4 Maximum Allowable Case Temperature vs Average On- Figure 5.7 Maximum Allowable Ambient Temperature vs Average On-
State Current (T106 and T107) State Current
140 120
Maximum Allowable Ambient Temperature (TA) - ˚C
10 AMP DEVICES
8 AMP DEVICES
6 AMP DEVICES
RI RI
60 ES ES
IT IT 70
1.5 AMP & JEDEC (R (RM
"2N" SERIES IT(AV) MS S)
)
40 60
& EC SERIES IT(AV)
50
20
0 2 4 6 8 10
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
RMS On-State Current [IT(RMS)] - Amps
On-State Current - Amps
Figure 5.5 Maximum Allowable Ambient Temperature vs On-State Figure 5.8 Maximum Allowable Case Temperature vs RMS On-State
Current (1.5 Amp, JEDEC “2N” Series and “EC” Series) Current
140 110
Maximum Allowable Ambient Temperature (TA) - ˚C
100 90
T1 80
80 T1 06
06 /T
10
/T 7
10 TO
6 AMP DEVICES
8 AMP DEVICES
10 AMP DEVICES
7 -2 70
60 TO 02
-2 TY
02 PE
TY 1
PE & 60
40 3
2
&
4
50
20
0 1 2 3 4 5 6 7
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
Average On-State Current [IT(AV)] - Amps
RMS On-State Current [IT(RMS)] - Amps
Figure 5.6 Maximum Allowable Ambient Temperature vs RMS On- Figure 5.9 Maximum Allowable Case Temperature vs Average On-
State Current (T106 and T107) State Current
9.0 2.0
1.5
6.0
VGT
IGT
5.0
1.0
4.0
Ratio of
3.0
Ratio of
.5
2.0
1.0
0 0
Figure 5.10 Normalized DC Gate-Trigger Current vs Case Temperature Figure 5.12 Normalized DC Gate-Trigger Voltage vs Case Temperature
32 4.0
TC = 25˚C See General Notes for specific
Instantaneous On-State Current (iT) - Amps
IH(TC = 25˚C)
24 3.0
6-10 AMP DEVICES
20
IH
16 2.0
12
Ratio of
0 0
0 .6 .8 1.0 1.2 1.4 1.6 -65 -40 -15 +25 +65 +110 +125
Figure 5.11 Instantaneous On-State Current vs On-State Voltage Figure 5.13 Normalized DC Holding Current vs Case Temperature
(Typical)
200
SUPPLY FREQUENCY: 60 Hz Sinusoidal
Peak Surge (Non-Repetitive) On-State Current (ITSM) - Amps
LOAD: Resistive
10 AMP DEVICES RMS ON-STATE CURRENT: [IT(RMS)]: Max
100
Rated Value at Specified Case Temperature
80
60 8 AMP DEVICES
50
40 6 AMP DEVICES
30
20
T106
& T1
07
10
8
6 1.5 A
5
MP D
EVIC
4 NOTES 1) GATE CONTROL MAY BE LOST ES
DURING AND IMMEDIATELY
3 FOLLOWING SURGE CURRENT
INTERVAL. 0.8 AMP DEVICES
2 2) OVERLOAD MAY NOT BE REPEATED
UNTIL JUNCTION TEMPERATURE
HAS RETURNED TO STEADY-STATE
RATED VALUE.
1
100
IGT = 50 µA MAX
9.0
IL (TC = 25˚C)
6.0
IGT = 500 µA MAX
IL
5.0
10
4.0
Turn-On Time (tgt) - µs
Ratio of
3.0
2.0
1.0 0
0.1
0.01 0.1 1 10 100
100
Average On-State Power Dissipation [PD(AV)] - Watts
2.0
1.0
0.8 AMP TO-92 DEVICES Figure 5.19 Simple Test Circuit For Gate Trigger Voltage and Current
1.5 AMP DEVICES
Measurement
0 1 2 3 4
8
V
6-10 AMP GT-
= I – ------------
I Amps
6
TO-220 & TO-202 DEVICES GT G 1000
4
where I G is reading (in amps) on meter just prior to V1 dropping.
2
Note: I GT may turn out to be a negative quantity (trigger current
flows out from gate lead).
0
0 2 4 6 8 10
RMS On-State Current [IT(RMS)] - Amps
180
160
1.0Hz
PEAK DISCHARGE CURRENT (ITM) - AMPS
140
12H
z
120
60H
z
100
80
60
ITM 0.8 - 4.0A DEVICES
40
tW
20
tW = 5 TIME CONSTANTS
0
1.0 3.0 5.0 7.0 10 30 50 70 100
PEAK CURRENT DURATION(tW) - µs
180
160
PEAK DISCHARGE CURRENT (ITM) - AMPS
140
1.0
Hz
120
12
Hz
100
60
Hz
80
60
ITM
40
0
1.0 3.0 5.0 7.0 10 30 50 70 100
PEAK CURRENT DURATION(tW) - µs