requirements Measures Repel water 1) Use Rain x is very effective and https://www.rainx.com/product/plastic- The wind resistance effects the performance greatly Make it from staying windshield will minimize obstruction of water-repellent/rain-x-plastic-water- adjustable on the surface wipers view. The windshield wipers. repellent/#.WocloKgbM2w Large windshields can affect visibility so that of the shield 2) Use a (mechanical or electric) require when “Rain-x” some form of power, weather Physics wanted product to it be human power, electrical performance repel water or both. P=VI and P=F*D/t can rule droplets over 3) Use an warmth. ultrasonic to vibrate the Use the lip molecules to allow off the rider to shield. view over the shield without wind on face. Must not 1) Add a film Tinted films reduce the amount http://crossroadsoptometry.com/anti- Reduce or obstruct visibility due to dark conditions. If too dark Create any to the shield of light through a clear object glare-lenses/ install a Glare that will thus reducing the glare. Cleaning ends up scratching the surface. lighter film. decrease glare. Polishing removes surface Re-polish 2) Have a imperfections which then the surface polished reduces light refraction (or or use plexi glass glare) replaceable 3) Tin the protective shield a Yellow tinting will also reduce film. yellow glare without reducing 4) Have a visibility through the shield. cleaning device. The cleaner the shield the less glare seen from imperfections.
Corrosion Inhibition at Scribed Locations in Coated AA2024-T3 by Cerium - and DMTD-Loaded Natural Silica Microparticles Under Continuous Immersion and Wet-Dry Cyclic Exposure
The Green Wall - Story and Photos by Stephen James Independent Investigative Journalism & Photography - VC Reporter - Ventura County Weekly - California Department of Corrections whistleblower D.J. Vodicka and his litigation against the CDC.
Stephen James - Independent Investigative Journalism & Photography