KANDLE OILFIELD
PRODUCTS, INC.
Established over a decade ago, KANDLE OILFIELD PRODUCTS, INC. is the only ISO-9001/
1994 Certified alternate manufacturer of replacement parts for mud pumps, drawworks and
swivels. In addition, KANDLE OILFIELD PRODUCTS, INC. is the only alternative source for
both the OEM design and Two Piece “L” Shaped fluid end assemblies and parts for the major
manufacturers of 1300, 1600 and 2200 horsepower triplex mud pumps.
Manufactured in the U.S.A. on state of the art CNC machinery, our parts are completely
interchangeable with those offered by the original equipment supplier. The warranty extended by
KANDLE OILFIELD PRODUCTS, INC. meets or exceeds the warranties offered by the same.
Our goal is to offer the drilling industry a high-quality, competitively priced alternative to the origi-
nal equipment supplier. We look forward to the opportunity to work with you in the future on your
replacement parts requirements.
National
Triplex Mud Pumps
Suction Line Dampener
Swivels
Drawworks
Oilwell
Triplex Mud Pumps
Swivels
Drawworks
Continental-Emsco
Triplex Mud Pumps
Strainer Assembly
Swivels
Drawworks
Gardner-Denver
Triplex Mud Pumps
Swivels
Ideco
Triplex Mud Pumps
Swivels
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with
any of the original equipment manufacturers named above. The manufacturers names or trademarks used herein are solely for identification
purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP. The
original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
1
®
KANDLE OILFIELD TWO PIECE “L” SHAPED*
PRODUCTS, INC. FLUID END ASSEMBLIES
7 2
14
10
17
4 18 16
6 5
12
11
9
13
15
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
“Southwest” is a registerd trademark of Southwest Oilfield Products, Inc. National is a registered trademark of National/Oilwell. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for
identification purposes only.
2
®
KANDLE OILFIELD TWO PIECE “L” SHAPED*
PRODUCTS, INC. FLUID END ASSEMBLIES
13
20
6
10
21
7 2
8
15
17
9 12
11
5
16
18 14
19
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Oilwell is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
3
®
KANDLE OILFIELD TWO PIECE “L” SHAPED*
PRODUCTS, INC. FLUID END ASSEMBLIES
Emsco Emsco
FA/FB-1300 FA/FB-1300
Item Description FA/FB-1600 Item Description FA/FB-1600
Complete Assembly 8490-2A 10 Valve Cover Stud w/Nut 4015-2
1 Threaded Flange 4475 11 Power End Stud w/Nut 4016-9
2 Liner Wear Plate 8490-3 12 Liner Retainer Capscrew 4017-36
3 Module and Wear Plate 2988 13 Liner Retainer Flange 6490-3
Gasket 14 Liner Retainer Pilot Ring 8422-3
4 Screw Gland 4575 15 Liner Retainer Nut 6590-1
5 Plug Assembly 4675-2A 16 Suction Module Stud w/Nut 4016-97
w/Guide & Bushing 17 Suction Module (Studded) 8490-2
6 Plug Seal P-129 18 Discharge Module (Studded) 8490-1
7 Valve Guide 4775-2 19 Dowel Pin 8488-5
8 Valve Guide Bushing 4700-I 20 Discharge Manifold 4017-46
9 Valve Guide Stud w/Nut 4016-99 Stud w/Nut
5 4
10
6
20
18
5
4
7 8 9
10
11
15
3 14 3
7 8 9
16
2
17 19 12
13
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
4
®
KANDLE OILFIELD TWO PIECE “L” SHAPED
PRODUCTS, INC. FLUID END ASSEMBLIES*
5 4 10
20
14
2
6
7 8 9 19
1
13
12
16 18 17
11
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Gardner-Denver® is a registered trademark of Gardner-Denver®. KOP is in no way affiliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
5
®
KANDLE OILFIELD TWO PIECE “L” SHAPED*
PRODUCTS, INC. FLUID END ASSEMBLIES
Ideco Ideco
Item Description T-1300/1600 Item Description T-1300/1600
Complete Assembly 8407-7A 10 Liner Retainer Flange 6407
1 Threaded Flange 4475 11 Liner Retainer Nut 6507
2 Screw Gland 4575 12 Suction Module Stud 4016-97
3 Plug Assembly w/Guide & 4675-2A 13 Suction Module (Studded) 8407-11
Bushing 14 Discharge Module (Studded) 8407-7
4 Valve Guide 4775-2 15 Dowel Pin 8488-5
5 Valve Guide Bushing 4700-I 16 Wear Plate 8407-10
6 Valve Guide Screw 4016-99 17 Valve Cover Plug Seal P-129
7 Valve Cover Stud w/Nut 4015-2 18 Module & Wear Plate Seal 2988
8 Power End Stud w/Nut 4018-68 19 Wear Plate Capscrew 4018-98
9 Discharge Manifold Stud 4017-50
w/Nut
3
2
7
9
14
17
4 5
10
8
12
19 11
18
6
16
13
15
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Ideco is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
6
®
KANDLE OILFIELD VALVE COVER/PLUG
PRODUCTS, INC. CONVERSION KITS*
®
KANDLE OILFIELD WEAR PLATE
PRODUCTS, INC. INSTALLATION*
Gardner Denver®
Description PZ8/9/10/11
Wear Plate 8477-4
Gasket 2974-11
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National and Oilwell are registered trademarks of National/Oilwell. Gardner-Denver® is a registered trademark of Gardner-Denver®. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s
distinctive mark(s) and part numbers are for identification purposes only.
7
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL TRIPLEX MUD PUMPS*
12P160
Description Part No. Description Part No.
Discharge Module, Studded 1292240 Back Up Ring 1292175
Suction Module, Studded 1292243 Threaded Ring 1292176
Main Bearing Cage 1292011 Wedge Adj. Screw 1292178
Crosshead, R.H. & Center 1292015 Wedge Retaining Spring 1292181
Int. Rod Oil Shield 1292016 Int. Rod Oil Wiper 1292182
Crosshead Liner 1292017 Int. Rod Baffle 1292194
Crosshead Pin 1292028 Discharge Strainer Assy, 6” Flange 1292215
Intermediate Rod 1292083 Discharge Strainer Assy, 5” Flange 1292225
Piston Rod Clamp 1292085 Discharge Connector 1292252
Crosshead, Left Hand 1292090 Discharge Connector Adapter 1292253
Liner Spray Manifold 1292120 Suction Module & Wear Plate Seal 1292257
Valve Guide Holder 1292140 Discharge Spacer Seal 1292258
Valve Guide Insert 1292141 Discharge Spacer, Studded 1292262
Sub Rod 1292146 Wear Plate 1292266
Piston Rod 1292147 Locking Wedge Assembly 1292268
Liner Bushing 1292165 Valve Cover Gasket 1540127
Liner Clamp 1292166 Suction Manifold Seal 1540851
Wedge Adj. Screw Washer 1292171 Rectangular Packing 2410031-433
Valve Cover 1292172 Rectangular Packing 2410031-437
Seal Retainer 1292174 Wedge Adj. Screw Nut 6300182
10P130
Description Part No. Description Part No.
Discharge Module, Studded 1290335 Threaded Ring 1290308
Suction Module, Studded 1290338 Wedge Adj. Screw Washer 1290315
Int. Rod Oil Wiper 1283099 Liner Spray Manifold 1290320
Crosshead, R.H. & Center 1290015 Discharge Connector 1290342
Crosshead Liner 1290017 Discharge Connector Adapter 1290343
Crosshead Pin 1290028 Suction Module & Wear Plate Seal 1290344
Intermediate Rod 1290083 Discharge Spacer Seal 1290345
Piston Rod Clamp 1290085 Sub Rod 1290346
Crosshead, Left Hand 1290090 Piston Rod 1290347
Liner Bushing 1290165 Discharge Spacer, Studded 1290348
Liner Clamp 1290166 Wear Plate 1290357
Seal Retainer 1290174 Valve Guide Insert Holder 1292140
Back Up Ring 1290175 Valve Guide Insert 1292141
Wedge Adj. Screw 1290178 Valve Cover Gasket 1540126
Wedge Retaining Spring 1290181 Suction Manifold Seal 1590051
Int. Rod Baffle 1290194 Rectangular Packing 2410031-348
Int. Rod Shield 1290249 Rectangular Packing 2410031-427
Valve Cover 1290307 Locking Wedge Assembly 1290376
Int. Rod Oil Wiper 1283099 Wedge Adj. Screw Nut 6300160
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
8
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL TRIPLEX MUD PUMPS*
9P100
Description Part No. Description Part No.
Discharge Module, Studded 1293240 Piston Rod Clamp 1293085
Suction Module, Studded 1290338 Crosshead, L.H. 1293090
Seal Retainer 1290174 Sub Rod 1293146
Back Up Ring 1290175 Piston Rod 1293147
Wedge Adj. Screw 1290178 Liner Bushing 1293165
Wedge Retaining Spring 1290181 Liner Clamp 1293166
Valve Cover 1290307 Int. Rod Wiper Seal 1293182
Threaded Ring 1290308 Liner Spray Manifold 1293193
Wedge Adj. Screw Washer 1290315 Int. Rod Baffle 1293194
Discharge Connector 1290342 Discharge Spacer, Studded 1293243
Discharge Connector Adapter 1290343 Valve Guide Insert Holder 1292140
Suction Module & Wear Plate Seal 1290344 Valve Guide Insert 1292141
Discharge Spacer Seal 1290345 Valve Cover Gasket 1540126
Wear Plate 1290357 Suction Manifold Seal 1590051
Crosshead, R.H. & Center 1293015 Rectangular Packing 2410031-348
Crosshead Liner 1293017 Rectangular Packing 2410031-427
Crosshead Pin 1293028 Locking Wedge Assembly 1290376
Int. Rod Oil Shield 1293016 Wedge Adj. Screw Nut 6300160
8P80
Description Part No. Description Part No.
Discharge Module, Studded 1291280 Piston Rod Clamp 1291085
Suction Module, Studded 1290338 Crosshead, Left Hand 1291090
Seal Retainer 1290174 Liner Bushing 1291165
Back Up Ring 1290175 Liner Clamp 1291166
Wedge Adj. Screw 1290178 Int. Rod Wiper Seal 1291182
Wedge Retainer Spring 1290181 Liner Spray Manifold 1291190
Valve Cover 1290307 Int. Rod Baffle 1291194
Threaded Ring 1290308 Sub Rod 1291276
Wedge Adj. Screw Washer 1290315 Piston Rod 1291277
Discharge Connector 1290342 Discharge Spacer, Studded 1291286
Discharge Connector Adapter 1290343 Valve Guide Insert Holder 1292140
Suction Module & Wear Plate Seal 1290344 Valve Guide Insert 1292141
Discharge Spacer Seal 1290345 Valve Cover Gasket 1540126
Wear Plate 1290357 Suction Manifold Seal 1590051
Crosshead, R.H. & Center 1291015 Rectangular Packing 2410031-348
Crosshead Liner 1291017 Rectangular Packing 2410031-427
Crosshead Pin 1291028 Locking Wedge Assembly 1290376
Int. Rod Oil Shield 1291226 Wedge Adj. Screw Nut 6300160
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
9
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL TRIPLEX MUD PUMPS*
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL SUCTION LINE DAMPENER*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
10
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL TRIPLEX MUD PUMPS*
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL SUCTION LINE DAMPENER*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
10
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL P-SERIES & N-SERIES SWIVELS*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
11
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL DRAWWORKS*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
12
®
KANDLE OILFIELD
PRODUCTS, INC. NATIONAL DRAWWORKS*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
13
®
KANDLE OILFIELD
PRODUCTS, INC. OILWELL TRIPLEX MUD PUMPS*
A-850/1100/1400/1700PT
Description A-850PT A-1100PT A-1400PT A-1700PT
Valve Guide 10-300-004 10-300-004 10-300-004 10-300-004
Valve Cover 10-300-005 10-300-005 10-300-005 10-300-005
Valve Cover Gasket 10-300-011 10-300-011 10-300-011 10-300-011
Diaphragm Housing 10-300-020 10-300-020 10-300-020 10-300-020
Diaphragm Gland 10-300-021 10-300-021 10-300-021 10-300-021
Lantern Ring 10-300-022 10-300-022 10-300-022 10-300-022
Crosshead Pin 10-303-014 10-303-014 10-300-131 10-300-131
Crosshead 10-303-073 10-303-073 10-300-132 10-300-132
Crosshead Guide (Upper) 10-303-009 10-303-009 10-300-141 10-300-141
Extension Rod 10-300-142 10-300-142 10-300-142 10-300-142
Line Adapter Nut 10-303-092 10-303-092 10-300-182 10-300-182
Liner Adapter 10-300-183 10-300-183 10-300-183 10-300-183
Wear Plate 10-300-184 10-300-184 10-300-184 10-300-184
Liner Spacer Ring 10-300-185 10-300-185 10-300-185 10-300-185
Liner Centering Sleeve 10-303-091 10-303-091 10-300-186 10-300-186
Suction Manifold Gasket 10-300-201 10-300-201 10-300-201 10-300-201
Crosshead Guide (Lower) 10-303-097 10-303-097 10-300-233 10-300-233
Piston Rod Stud 10-305-203 10-305-203 10-305-203 10-305-203
Liner Wear Plate Gasket 20-100-008 20-100-008 20-100-008 20-100-008
Ext. Rod Wiper Seal 20-100-015 20-100-015 20-100-015 20-100-015
Piston Rod 20-150-123 20-150-123 20-150-123 20-150-123
Piston Rod Extension 20-150-125 20-150-125 20-150-125 20-150-125
Piston Rod Clamp 20-150-132 20-150-132 20-150-132 20-150-132
Valve Guide Bushing 20-200-004 20-200-004 20-200-004 20-200-004
Liner Flushing Shield 20-460-668 20-460-668 20-240-668 20-460-668
Valve Guide Capscrew 75-632-234 75-632-234 75-632-234 75-632-234
Discharge Manifold O-Ring 99-609-345 99-609-345 99-609-345 99-609-345
Discharge Manifold 10-303-130 10-303-175 10-300-340 10-300-267
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Oilwell is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
14
®
KANDLE OILFIELD
PRODUCTS, INC. OILWELL PC-SERIES SWIVELS*
PC Series Swivels
Description PC100/150 PC225/300/425/500/650
Gooseneck 22-028-131 ---
Cartridge Assembly 22-032-016 22-035-012
Washpipe 22-032-010 22-034-019
Washpipe Packing 22-028-181 22-034-017
Top Adapter Ring 22-032-001 22-025-169
Spacer Ring 22-028-187 22-034-013
Bottom Adapter Ring 22-032-006 22-034-014
Lantern Ring 22-028-186 22-034-015
Packing Adapter Ring 22-032-005 22-034-016
Ring Nut 22-032-002 22-025-160
Packing Housing 22-032-004 22-025-166
Cartridge Assembly O-Ring 99-607-344 99-607-427
®
KANDLE OILFIELD
PRODUCTS, INC. OILWELL DRAWWORKS*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Oilwell is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
15
®
KANDLE OILFIELD
PRODUCTS, INC. EMSCO TRIPLEX MUD PUMPS*
FC-2200 FB-1300/1600
Description Part No. Description Part No.
Studded Fluid End (Discharge) 6323-0108-00 Fluid End, Studded 6316-0357-00
Studded Fluid End (Suction) 6323-0109-00 Intermediate Rod 6316-0028-00
Threaded Retainer 6323-0087-00 Valve Pot Cover 6316-0039-00
Threaded Ring 6323-0086-00 Discharge Manifold 6316-0043-00
Valve Pot Cover 6323-0083-00 Valve Cover Seal 6316-0092-00
Valve Guide w/Bushing 6323-0103-00 Baffle 6316-0093-00
Handler, Valve Pot 6323-0126-00 Lower Valve Guide Bushing 6316-0096-00
Wear Plate 6323-0097-00 Piston Rod Clamp 6316-0107-11
Liner Thread Ring 6323-0096-00 Liner End Cover 6316-0164-00
Liner Lock 6323-0099-00 Liner Lock Ring 6316-0333-00
Retainer, Valve Guide 6323-0093-00 Lower Valve Guide 6316-0354-00
Piston Rod 6316-0359-00
Lock Bolt 6316-0360-00
Cylinder Threaded Ring 6316-0361-00
Cylinder Head 6316-0362-00
Alignment Ring 6316-0363-00
Cylinder Head Plug 6316-0364-00
Wear Plate 6316-0365-00
Liner Threaded Ring 6316-0366-00
Liner Lock 6316-0367-00
Cylinder Head Seal 6316-0369-00
Liner Seal 6316-0373-00
Stuffing Box 6397-0544-00
Stuffing Box Lock Spring 6397-0546-00
Stuffing Box Spring 6397-0548-00
Upper Valve Guide 6397-0575-00
Upper Valve Guide Retainer 6397-0603-00
Upper Valve Guide Retainer Screw 7501-0051-00
Ring Joint Gasket 7601-0661-11
Discharge Manifold O-Ring 7602-1600-25
Liner Lock Ring O-Ring 7602-1600-44
Suction Manifold O-Ring 7602-1600-61
Single Lip Oil Seal 7602-2131-47
Double Lip Oil Seal 7602-2132-76
Crosshead 6316-0022-00
Crosshead Guide (Lower) 6316-0181-00
Crosshead Pin 6316-0087-00
Crosshead Guide (Upper) 6316-0182-00
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
16
®
KANDLE OILFIELD
PRODUCTS, INC. EMSCO TRIPLEX MUD PUMPS*
F-800/1000
Description F-800 F-1000
Fluid End Module, Studded 6999-0086-02 6999-0086-02
Threaded Ring 6999-0089-00 6999-0089-00
Crosshead Extension Rod 6320-0041-00 6319-0020-00
Liner Cage 6319-0026-00 6319-0026-00
Valve Pot Cover 6319-0027-00 6319-0027-00
Cylinder Head Plug 6319-0031-00 6319-0031-00
Baffle 6320-0028-00 6319-0070-00
Piston Rod Clamp 6320-0072-00 6319-0071-10
Piston Rod 6320-0030-00 6319-0075-00
Valve Cover Seal 6319-0076-00 6319-0076-00
Lower Valve Guide 6319-0087-00 6319-0087-00
Lower Valve Guide Locking Clip 6319-0089-00 6319-0089-00
Cylinder Head 6319-0090-00 6319-0090-00
Liner End Cover 6319-0121-00 6319-0121-00
Stuffing Box Spring 6397-0564-00 6397-0539-00
Stuffing Box Lock Spring 6397-0565-00 6397-0540-00
Stuffing Box 6397-0560-00 6397-0543-00
Upper Valve Guide 6397-0575-00 6397-0575-00
Upper Valve Guide Retainer Plate 6397-0603-00 6397-0603-00
Lower Valve Guide Bushing 6316-0096-00 6316-0096-00
Retainer Plate Screw 7501-0051-00 7501-0051-00
Ring Joint Gasket 7602-0661-11 7602-0661-11
Suction Manifold O-Ring 7602-1600-61 7602-1600-61
Discharge Manifold O-Ring 7602-1610-46 7602-1610-46
Single Lip Oil Seal 7602-2131-97 7602-2132-05
Double Lip Oil Seal 7602-2132-74 7602-2132-75
Liner Seal 7602-2200-32 7602-2200-32
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
17
®
KANDLE OILFIELD
PRODUCTS, INC. EMSCO STRAINER ASSEMBLY*
®
KANDLE OILFIELD
PRODUCTS, INC. EMSCO SWIVELS*
Emsco Swivels
Description LB-200/300 LB-400/500/650
Packing Box Assembly 6597-0400-00 6597-0394-00
Washpipe 6597-0399-00 6597-0396-00
Washpipe Packing 6504-0012-00 6505-0007-00
HP Washpipe Packing 6504-0017-00 6505-0016-00
Top Packing Spacer 6597-0382-00 6597-0382-00
Middle Packing Spacer 6597-0383-00 6597-0383-00
Bottom Packing Spacer 6597-0384-00 6597-0384-00
Upper Packing Spacer 6597-0388-00 6597-0388-00
Packing Gland Housing 6597-0380-10 6597-0380-00
Lower Gland Nut 6597-0379-00 6597-0379-00
Upper Gland Nut 6597-0381-00 6597-0381-00
Packing Box O-Ring 7602-1600-63 7602-1600-63
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
18
®
KANDLE OILFIELD
PRODUCTS, INC. EMSCO DRAWWORKS*
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark of Continental-Emsco/National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
19
®
KANDLE OILFIELD
PRODUCTS, INC. GARDNER-DENVER® TRIPLEX MUD PUMPS*
PZ-7/8/9/10/11
Description PZ-7 PZ-8 PZ-9 PZ-10 & PZ-11
Fluid Cylinder 205PZL029D 205PZL029D 205PZL029D 202PZL029B
Valve Cover 2011860 2011860 2011860 200PZL147
Valve Cover Ring 2011699 2011699 2011699 200PZL387
Valve Cover Lock 2011857 2011857 2011857 200PZL587
Valve Guide Assembly 2011706 2011706 2011706 200PZL483A
Valve Guide Retainer Plate 2011701 2011701 2011701 2011701
Valve Cover Gasket 2011862 2011862 2011862 204PZL715
Valve Cover Gasket Retaining Ring 2011861 2011861 2011861 ---
Valve Guide Bushing 2007674 2007674 2007674 2007674
Piston Rod-Clamp Type 201PZG060 1PZ183 1PZ183 200PZL060
Extension Rod-Clamp Type 200PZG839 1PO183 PZ183 200PZL839
Rod Clamp 2012240 2012240 2012240 200PZL092A
Oil Stop Head Seal 2011872 2011872 2011872 2011872
Suction Manifold to Cylinder Gasket 25G41 25G41 25G41 25G41
Discharge Manifold to Cylinder Gasket 25AL35 25AL35 25AL35 25AL35
Liner to Cylinder Gasket 25AT37 25AT37 25AT37 25AT37
Valve Guide Washer 95W2 95W2 95W2 95W2
Valve Guide Capscrew 75AA178 75AA178 75AA178 75AA178
Liner Clamp 1PV14 1PV14 1PV14 200PZL455
®
KANDLE OILFIELD
PRODUCTS, INC. GARDNER-DENVER® SWIVELS*
SW-400/550
Description Part No.
Washpipe 126946
Washpipe Packing 185325
Packing Ring 126961
Packing Box 185303
Top Spacer 185304
Grease Gland 185305
Middle Spacer 185306
Bottom Spacer 185307
Packing Box O-Ring 162810
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Gardner-Denver® is a registered trademark of Gardner-Denver®. KOP is in no way affiliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification
purposes only.
20
®
KANDLE OILFIELD
PRODUCTS, INC. IDECO TRIPLEX MUD PUMPS*
T-500/800/1000/1300/1600
Description T-500 T-800/1000 T-1300/1600
Fluid Cylinder (Less Studs & Nuts) 551-422-01 551-422-01 551-122-01
Fluid Cylinder (Studded) 551-458 551-458 551-158
Cylinder Head Plug (Top) 551-422-03 551-422-03 551-122-02
Threaded Ring 551-405-03 551-405-03 551-105-03
Threaded Plug Retainer 551-405-04 551-405-04 551-105-04
Threaded Liner Retainer 551-522-01 551-405-05 551-105-05
Cylinder Head Plug 551-422-02 551-422-02 551-122-02
Lower Valve Guide 551-405-07 551-405-07 551-105-07
Lower Valve Guide Retainer 551-422-04 551-422-04 551-105-08
Upper Valve Guide --- --- 551-105-06
Plug & Liner Seal BMT-1669-63-09 BMT-1669-63-09 BMT-1669-63-08
Piston Rod 551-522-03 551-405-13 551-105-13
Rod Clamp 551-506-08 551-406-08 551-106-08
Crosshead Extension Rod 551-506-06 551-306-06 (T-1000) 551-106-06
551-406-06 (T-800)
Stripper Box 551-506-10 551-406-15 551-106-13
Stripper Box Packing IP-806 IP-805 IP-804
Lantern Ring 551-506-14 551-306-08 551-106-12
Crosshead --- 551-306-01 551-106-01
Upper & Lower X-Head Guide (New Style) --- 551-306-30 551-106-30
Upper X-Head Guide (Old Style) --- 551-306-02 551-106-02
Lower X-Head Guide (Old Style) --- 551-306-03 551-106-03
Wrist Pin --- 551-306-04 551-106-04
Discharge Manifold --- 551-305-02 551-105-11
Discharge Manifold O-Ring IO-548 IO-548 IO-548
Suction Manifold O-Ring IO-521 IO-521 IO-507
Ring Joint Gasket IG-258 IG-258 IG-258
®
KANDLE OILFIELD
PRODUCTS, INC. IDECO SWIVELS*
TL-120/200/300/400/500
Description TL-120 TL-200 TL-300 TL-400 TL-500
Gooseneck 559-05 531-12 491-06 491-06 491-06
Washpipe 339-33 491-07 491-07 491-07 491-26
Upper Packing Set IP-166 IP-162 IP-162 IP-162 IP-162
Lower Packing Set IP-177 IP-802 IP-801 IP-801 IP-801
Upper Cartridge --- 531-14-01 491-20 491-20 491-20
Upper Packing Nut 559-10 531-13 491-10 491-10 491-10
Lower Cartridge 559-23-02 531-23 491-27 491-27 491-27
Lower Packing Nut --- --- 491-11 491-11 491-11
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Ideco is a registered trademark of National/Oilwell. KOP is in no way affiliated with this company. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
21
®
KANDLE OILFIELD
PRODUCTS, INC. TRIPLEX MUD PUMP STUDS*
TWO PIECE “L” SHAPED* TRIPLEX PUMP STUDS
Part No. Module Size Qty. Per Pump Size
National 12P160 Threaded Flange Stud w/ Nut 4015-54 72 ea. 1-1/2” X 10”
Suction Module Stud w/Nut 4018-17 18 ea. 1-3/4” x 21-1/8”
Power End Stud w/Nut 4015-95 30 ea. 1-3/8” x 7 ”
National 10P130 Threaded Flange Stud w/Nut 4015-5 72 ea. 1-3/8” x 9-7/8”
Suction Module Stud w/Nut 4018-19 18 ea. 1-1/2” x 19-1/8”
Power End Stud w/Nut 4015-96 24 ea. 1-1/2” x 6-7/8”
Oilwell Threaded Flange Stud w/Nut 4015-2 72 ea. 1-1/4” x 9-3/8”
A-850/1100/1400/1700PT Suction Module Stud w/Nut 4016-97 18 ea. 1-1/2” x 19-1/8”
Power End Stud w/Nut 4016-96 12 ea. 1-3/4” x 11-3/4”
Continental Emsco Threaded Flange Stud w/Nut 4015-2 72 ea. 1-1/4” x 9-3/8”
FB-1300/1600 Suction Module Stud w/Nut 4016-97 18 ea. 1-1/2” x 19-1/8”
Power End Stud w/Nut 4016-9 18 ea. 1-1/2” x 13”
Ideco T-1300/1600 Threaded Flange Stud w/Nut 4015-2 72 ea. 1-1/4” x 9-3/8”
Suction Module Stud w/Nut 4016-97 18 ea. 1-1/2” x 19-1/8”
Power End Stud w/Nut 4018-68 24 ea. 1-1/2” x 12-3/4”
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
National, Oilwell and Ideco are registered trademarks or National/Oilwell. Southwest is a registered trademark of Southwest Oilfield Products, Inc. Emsco is a registered trademark of Continental-Emsco/
National/Oilwell. KOP is in no way affiliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
22
®
KANDLE OILFIELD
PRODUCTS, INC. TRIPLEX MUD PUMP STUDS*
EMSCO TRIPLEX PUMP STUDS
Pump Description Part No. Qty. Per Pump Size
F-800/1000 Discharge Manifold Stud 7507-2108-00 12 ea. 1-1/4” x 9-1/2”
Discharge Manifold Nut 7601-0630-24 12 ea. 1-1/4” – 8
Threaded Ring Stud 7507-2150-00 30 ea. 1-3/8” x 7-7/8”
Threaded Ring Nut 7601-0630-28 30 ea. 1-3/8” – 8
Module to Frame Stud 7507-2205-00 18 ea. 1-1/2” x 6”
Module to Frame Nut 7601-0630-17 18 ea. 1-1/2” – 8
FB-1300/1600 Cylinder Threaded Ring Stud 7507-2210-00 30 ea. 1-1/2” x 8-5/8”
Cylinder Threaded Ring Nut 7601-0630-17 30 ea. 1-1/2” – 8
Discharge Manifold Stud 7507-2108-00 12 ea. 1-1/4” x 9-1/2”
Discharge Manifold Nut 7601-0630-24 12 ea. 1-1/4” – 8
Module to Frame Stud 7507-2201-00 18 ea. 1-1/2” x 6-7/8”
Module to Frame Nut 7601-0630-17 18 ea. 1-1/2” – 8
Liner Threaded Ring Stud 7507-2013-00 36 ea. 1” x 9”
Liner Threaded Ring Nut 7601-0610-18 36 ea. 1” – 8
*Kandle Oilfield Products, Inc. (“KOP”) is an independent manufacturer of replacement parts. KOP is neither a licensee, nor is it affiliated with any of the original equipment manufacturers named above. The
manufacturers names or trademarks used herein are solely for identification purposes and are not intended by KOP to cause confusion as to the source, sponsorship, or quality of the parts manufactured by KOP.
The original manufacturers named above and throughout this catalog do not sponsor, promote, warranty or endorse KOP’s products.
Emsco is a registered trademark/tradename of Continental-Emsco/National/Oilwell. Gardner-Denverç is a registered trademark of Gardner/Denver®. Ideco is registered trademark of National/Oilwell. KOP is in no
way affiliated with these companies. All KOP parts are marked with KOP’s distinctive mark(s) and part numbers are for identification purposes only.
23
®
KANDLE OILFIELD
PRODUCTS, INC.
24
®
KANDLE OILFIELD
PRODUCTS, INC. GENERAL TERMS AND CONDITIONS
ALL KANDLE OILFIELD PRODUCTS ARE SOLD OR FAILURE OF A PRODUCT SHALL NOT EXCEED THE
OTHERWISE FURNISHED IN ACCORDANCE WITH AMOUNT WHICH KOP RECEIVED FROM BUYER OR
THESE GENERAL TERMS AND CONDITIONS. USER FOR THE PRODUCT FOUND TO BE DEFECTIVE.
WHERE OTHER MANUFACTURERS PRODUCTS ARE
KANDLE OILFIELD PRODUCTS, INC., (KOP) USED IN KOP MANUFACTURED PRODUCTS PROVE
WARRANTS THE PRODUCTS SOLD BY IT TO BE FREE DEFECTIVE, KOP'S LIABILITY SHALL EXIST ONLY TO
FROM DEFECTS IN MATERIAL AND WORKMANSHIP THE EXTENT THAT KOP IS ABLE TO RECOVER FROM
FOR A PERIOD OF (1) YEAR FROM DATE OF SUCH MANUFACTURERS OR SUPPLIERS FOR SAID
SHIPMENT FROM KOP. KOP WILL REPAIR OR DEFECTS.
REPLACE AT KOP'S OPTION, F.O.B. KOP LOCATION
WHERE THE PRODUCTS WERE MANUFACTURED, KOP'S LIABILITY FOR DAMAGE TO OR LOSS OF
ANY PRODUCTS WHICH KOP DETERMINES TO BE PROPERTY OF BUYER OR OTHERS DURING
DEFECTIVE IN MATERIAL OR WORKMANSHIP, PERFORMANCE OF WORK THEREON BY KOP OR
PROVIDED THAT KOP IS GIVEN PROMPT NOTICE IN WHILE IN KOP'S POSSESSION SHALL NOT EXCEED
WRITING OF ANY DEFECT; AND PROVIDED BUYER THE PRICE RECEIVED BY KOP FOR ITS WORK ON
OR USER HAS KEPT SUCH PRODUCTS IN CONDITION THE ARTICLE LOST OR DAMAGED.
WHERE KOP CAN EXAMINE SAME; AND PROVIDED
NO MACHINING, WELDING, HEATING, OR KOP RETAINS THE RIGHT TO MAKE
OTHERWISE ALTERING OF ANY KIND IS DONE TO SUBSTITUTIONS AND MODIFICATIONS TO ITS
SAID PRODUCTS AFTER SAME ARE PERFORMED PRODUCTS PROVIDING THAT SAID CHANGES DO
OR SHIPPED FROM KOP'S FACILITIES. IN NO EVENT NOT AFFECT THE PERFORMANCE OF THOSE ITEMS.
SHALL KOP BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL, SPECIAL OR OTHER DAMAGES KOP RETAINS FOR ITSELF ALL PROPRIETARY
OF ANY NATURE. IT IS EXPRESSLY AGREED THAT RIGHTS IN AND TO ALL DESIGNS, ENGINEERING
THIS WARRANTY SHALL BE IN LIEU OF ANY OTHER DETAILS AND DATA CONCERNING THE PRODUCTS
WARRANTY, EXPRESSED OR IMPLIED, INCLUDING SOLD BY IT.
ANY IMPLIED WARRANTY FOR MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR PURPOSE. ANY TAXES OR CHARGES WHICH KOP MAY BE
REQUIRED TO PAY OR COLLECT UNDER ANY
KOP DOES NOT WARRANT THAT ITS PRODUCTS EXISTING OR FUTURE LAW UPON OR APPLICABLE
MEET THE REQUIREMENTS OF ANY SAFETY CODE TO THE SALE, PURCHASE, MANUFACTURE,
OF ANY STATE, MUNICIPALITY, OR OTHER TRANSPORTATION, DELIVERY, STORAGE, USE OR
JURISDICTION OR THAT THEY WILL PERFORM AS CONSUMPTION OF THE PRODUCTS SHALL BE FOR
ANTICIPATED OR DESIRED BY BUYER OR USER AND/ THE ACCOUNT OF THE BUYER.
OR USER ASSUMES ALL RISK AND LIABILITY
WHATSOEVER RESULTED FROM USE THEREOF, THERE ARE NO UNDERSTANDINGS OR
WHETHER USED SINGLY OR IN CONJUNCTION WITH AGREEMENTS BETWEEN BUYER OR USER AND KOP
OTHER EQUIPMENT. RELATIVE HERETO WHICH ARE NOT FULLY
EXPRESSED HEREIN, NO ACKNOWLEDGMENT,
PRODUCTS FURNISHED BY KOP BUT NOT PURCHASE ORDER OR OTHER DOCUMENT WHICH
MANUFACTURED BY KOP WILL CARRY ONLY THE CONTAINS ANY TERMS OR CONDITIONS OTHER
WARRANTY OF THE MANUFACTURER OF SUCH THAN ANY AND ALL OF THESE IS BINDING ON KOP.
PRODUCTS, IF ANY. KOP DOES NOT WARRANTY
PRODUCTS NOT MANUFACTURED BY KOP. THESE GENERAL TERMS AND CONDITIONS AND
ANY SPECIAL CONDITIONS WHICH MAY APPLY SHALL
KOP'S LIABILITY FOR ANY LOSS OR DAMAGE IN BE CONSTRUED UNDER AND GOVERNED BY THE
ANY WAY RESULTING TO BUYER/USER FROM ANY LAWS OF THE STATE OF TEXAS.
25
4" 5000 # RTJ FLANGE
5-1/8 5000#
FLANGE
TYP 2
PLACES
22.5˚
DISCHARGE MANIFOLD
T1300-1600
551-105-11
20 22 21 23
3
2
5.500
14
17
4
5
26.875
8
10
34.625
36.625
12
19
11
18
16
6
13
15
22.5000
30.0000
14
10
17
18 16
4
6 5
12
9 11
13
15 8
24
6 5 4 10
20
14
13
12
16 18 19
17 2 1 11
ITEM QTY.
NO. PART NO. DESCRIPTION REQ.
8475-1A FLUID END ASSEMBLY CONSIST OF THE FOLLOWING 1
1 8477-3 LINER WEARPLATE 1
"L" SHAPE FLUID END ASSEMBLY FOR
2 2930-08 WEARPLATE GASKET 1 GARDNER-DENVER PZ-8/PZ-9
3 4475 THREADED FLANGE 2
4 4575 SCREW GLAND 2
P/N 8475-1A
(COMPLETE WITH VALVE GUIDE, SCREW
5 4675-1A PLUG ASSEMBLY SEAL AND BUSHING) 2
6 P-129 HP VALVE COVER PLUG SEAL 2
7 4775R VALVE GUIDE (COMPLETE WITH BUSHING) 2
8 4700-I VALVE GUIDE BUSHING 2
9 4018-88 VALVE GUIDE SCREW 4
(WITH 1-1/4"-7 HEAVY HEX NUT)
10 4015-2 VALVE COVER STUD TORQUE TO 1350 FT. LBS. 24
(WITH 7/8"-9 HEAVY HEX NUT)
11 4017-56 POWER END STUD (SHORT) TORQUE TO 500 FT. LBS. 4
(WITH 1-1/4"-7 HEAVY HEX NUT)
12 4016-14 LINER RETAINER STUD (LONG)
TORQUE TO 1350 FT. LBS. 8
13 8475-3 LINER RETAINER FLANGE 1
(WITH 1-1/2"-8 HEAVY HEX NUT)
14 4016-97 SUCTION MODULE STUD TORQUE TO 2775 FT. LBS. 6
15 4017-77 (NOT SHOWN) SUCTION MANIFOLD CAP SCREW TORQUE TO 380 FT. LBS. 8
16 8475-2 SUCTION MODULE (STUDDED ONLY)
1
17 8475-1 DISCHARGE MODULE (STUDDED ONLY)
1
18 8488-5 DOWEL PIN 2
19 2988 DISCHARGE MODULE GASKET 1
(WITH 1"-8 HEAVY HEX NUT)
20 4017-5 DISCHARGE MANIFOLD STUD TORQUE TO 650 FT. LBS. 4
21 6278-25 PISTON ROD 1
22 6288-1 SUB ROD 1
23 1290-2 PISTON ROD CONNECTING STUD 1
24 1248-CW ROD CLAMP WITH SPRAY SYSTEM 1
19 21 20 21
14
11
9
17
12
16
6
18 4
5
10
15
13
8
3
2
7
14
10
17
18 16
4
6 5
12
11
9
13
15 8
ITEMS 4,5,6 ARE PART OF ITEM 3 AND ARE SHOWN FOR REFERENCE ONLY.
21 23 22 24
6 5 4 10
8
20
14
13
12
16 18 17 18 2 1
11
ITEM QTY.
NO. PART NO. DESCRIPTION REQ.
8477-A FLUID END ASSEMBLY CONSIST OF THE FOLLOWING 1
1 8477-3 LINER WEARPLATE 1
2 2930-08 WEARPLATE GASKET 1
3 4475 THREADED FLANGE 2
4 4575 SCREW GLAND 2
(COMPLETE WITH VALVE GUIDE, SCREW
5 4675-1A PLUG ASSEMBLY SEAL AND BUSHING) 2
6 P-129 HP VALVE COVER PLUG SEAL 2
TWO-PIECE
7 4775R VALVE GUIDE (COMPLETE WITH BUSHING) 2 "L" SHAPE FLUID END ASSEMBLY FOR
8 4700-I VALVE GUIDE BUSHING 2 PZ-10 / PZ-11
9 4016-99 VALVE GUIDE SCREW 4 P/N 8477-A
10 4015-2 VALVE COVER STUD 24
11 4018-35 POWER END STUD 8
12 4018-34 LINER RETAINER STUD 8
13 6477 LINER RETAINER FLANGE 1
14 4016-97 SUCTION MODULE STUD 6
15 4017-77 (NOTSHOWN) SUCTION MANIFOLD CAP SCREW 8
16 8477-2 SUCTION MODULE (STUDDED ONLY)
1
17 8477-1 DISCHARGE MODULE (STUDDED ONLY)
1
18 8488-5 DOWEL PIN 2
19 2988 DISCHARGE MODULE GASKET 1
20 4017-5 DISCHARGE MANIFOLD STUD 4
21 6278-25 PISTON ROD 1
22 6279-1 SUB ROD 1
23 1290-2 PISTON ROD CONNECTING STUD 1
24 1277-CW ROD CLAMP WITH SPRAY SYSTEM 1
25
22 24 23
13
20
6
10
21
8
15
17
12
9
5
11
16
18
14
19
13
20
6
10
8
21
15
17
12
5
11
18
16
14
9
19
10
20
7.500
18
5 7
4
8
9
10
11
15
35.938 20.625
40.000
6
7
14
3 3
8
9
16
19
12
17
30.125 13