SPECIFICATION
WETROOMS GUIDE
PEACE OF MIND
GUARANTEED
Introduction
CCL Wetrooms are the UK’s leading wetroom specialist Why we are different
offering a range of innovative products designed to create
stylish contemporary wetrooms, backed up by our unique CCL Wetrooms understand that creating the perfect
lifetime guarantee. wetroom is not just about designing the right product or
offering the best service.
With over 30 years experience in waterproofing, our
unrivalled track record allows us to continually lead We offer our customers a complete wetroom solution
the way in wetroom design whilst embracing the latest which includes design, specification and the option of a
technology combined with exceptional customer support. fully guaranteed installation, plus full technical support
whenever it’s required.
Our comprehensive range of products are designed to
offer a variety of solutions for Architects and Designers Our involvement in a project from conception to
whilst overcoming the challenges presented by today’s completion ensures quality is never compromised.
modern floor structures.
CCL Wetrooms deliver peace of mind - Guaranteed
1
Manufacturer
As a leading UK manufacturer our products are
Advantages of a wetroom
designed specifically for the UK market and fully tested
to the highest possible standards. Our research and • Stylish, contemporary design providing a luxury feel to any bathroom.
development team are continually innovating and
• Efficient use of space creating the feeling of a large open area.
improving, ensuring that we are able to offer a wetroom
solution in virtually any situation. • Easy to use and keep clean with little maintenance required.
In addition to our own manufactured products we are • Endless design possibilities by not being limited to set dimensions.
the exclusive distributors of products such as
Tilesafe and Screedsafe as well as offering other • Accessible for all - allowing bathrooms to meet the latest fully inclusive design criteria and legislation.
specialist waterproofing solutions.
Key
DESIGN & SPECIFICATION SERVICE
INSTALLATION
NTE
RA
E
Our extensive experience has shown us that some
GUA
E
ET
IM
),:762,
E
LIF
TE
UA N
G
RA
2 3
CONTENTS
SECTION
1 LINEAR DRAINS
SECTION
2 MODULAR WET-FLOOR
SECTION
3 FLOOR FORMERS
SECTION
4 WATERPROOFING
SECTION
5 INSTALLATION
5.1 INSTALLATION
Finished Product
WET-FLOOR
2.1 MODULAR
The Modular Wet-Floor system is a unique concept Consisting of three main elements, the Modular
in wetroom technology that can be used in a Wet-Floor is simple to configure. Start by selecting
number of configurations to create a wetroom on a the required number of Drainage Components and
timber floor. Tapered Boards, then simply choose the appropriate
Floor or Wall Grill to suit your wetroom layout.
The system is versatile and cost effective and can
be installed with the linear drain in either the The Drainage Component and Tapered Boards can
centre of the shower area, or neatly positioned then be easily trimmed on-site, making the whole
against the wall. system quick and easy to install.
Key features
• Modular system
• Easily trimmed
• Quick and easy to install
• One or two way fall
• Ideal for large format tiles
• Floor or wall grill option
• Variable waste position
• Flow rate up to 68 L/min
• Height adjustable grill
• Lifetime guarantee
NTE
RA
E
GUA
E
IM
ET ),:762,
E
LIF
TE
UA N
G
RA
The Modular Wet-Floor system comprises of three main elements: Manufactured from tough ABS within the shower area, or neatly
plastic, the Drainage Component up against the wall to create a
1 Drainage Component is the central element of the sleek and unobtrusive wall drain*.
2 Tapered Board Modular Wet-Floor, once its
position has been decided, the The Drainage Component can be
3 Floor/Wall Grill
remainder of the system is built easily trimmed by up to 200mm
Select the required number of Forming a base for the Linear screw ports.
1 drainage components. Drain, the Drainage Component
WET-FLOOR
WET-FLOOR
has a 1mm gradient towards the Two Drainage components can
2.1 MODULAR
2.1 MODULAR
*When installed with the Wall Grill, the
centre and can be installed in also be butted together to create Drainage Component width is reduced by
either an offset or central position a larger wetroom area. 80mm, to 220mm.
$
The Trap
No. of Traps
One TRAP Two TRAPS
For higher flow rates a third trap THREE TRAPS FLOW RATES
can be installed giving up to
No. of wastes
68 L/min*. No. of traps
/PLQ
/PLQ QD QD
Stone / Solid-infill
SEC. 2.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 2.1
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR
The Tapered Boards are manufactured from XPS Using a combination of boards, either a one way fall There are two types of grill available within the Modular Wet-Floor system, both are designed to fit onto the
foam with a mineral coating, making them both towards the wall, or a two way fall with a central or Drainage Component.
lightweight and easy to handle, whilst maintaining offset drain can be created. Two or more Tapered
good thermal properties and compressive strength. Boards can also be butted together to create a larger
wetroom area. FLOOR GRILL
Each board is 1200mm long and tapered from
22mm to 11mm, giving a consistent gradient A 280mm x 300mm infill panel is available for use in Floor Grill
every time. certain configurations. For installation in either an offset
$
or central position within the
Available in five widths, the boards can be easily shower area.
WET-FLOOR
WET-FLOOR
trimmed to size using a hand saw and should be • Designed for timber floors Grill width 58mm
2.1 MODULAR
2.1 MODULAR
secured with the fixing washers supplied, at a • One or two way fall WALL GRILL
minimum of 300mm centres. • Wetroom area can be varied to suit Wall Grill
• Easily trimmed For installation against the wall.
The system is designed with versatility in mind $
and can be installed in a number of different • Fixing washers included Grill width 86mm
configurations. • Quick and easy to install
• Ideal for large format tiles
See pages 7 to 10 for the most common layouts.
Grill length
$
9 GRILL LENGTHS
The Drainage Component is • 600mm
manufactured with one trough size • 800mm
%
at 660mm, all lengths of grill are • 900mm
then fitted onto this trough. • 1000mm
• 1100mm
The grill is available in nine standard • 1200mm
sizes; two grills can be butted • 1300mm
together to create a larger wetroom • 1400mm
area (excluding 600mm grill). • 1500mm
Tapered Boards are available in 6 standard sizes:
A B
• 300mm x 1200mm
• 500mm x 1200mm
• 700mm x 1200mm
• 1000mm x 1200mm Bespoke grills can be manufactured for sizes in between and over those that are standard. Please contact our
• 1200mm x 1200mm technical team to discuss your requirements.
• 1500mm x 1200mm
Infill Panel
• 280mm x 300mm
p4
& 0844 327 6002 www.ccl-wetrooms.co.uk
p5
2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR
Grill Finish The Modular Wet-Floor is an extremely versatile system which can be installed in many possible combinations.
The following examples show typical wetroom layouts that can be achieved, for further assistance please
The grill is available in various Type A - Solid Grill: Type A
contact our technical team who will be pleased to advise.
different finishes. Grained stainless steel with a
3mm gap around the grill for
All are manufactured in 316 a sleek stylish finish.
marine grade stainless steel,
ensuring a stunning high LAYOUT 1 LAYOUT 2
Type B - Oblong Slots: TYPE B
quality finish. Three rows of oblong slots in
a grained stainless steel finish.
WET-FLOOR
WET-FLOOR
Type A Solid Grill is supplied
2.1 MODULAR
2.1 MODULAR
as standard unless otherwise
specified.
Type C - Square Holes: TYPE C
Three rows of squares in a
grained stainless steel finish.
WIDTH
The Wall Grill is width adjustable
to allow for different wall tile
thicknesses. *5,//:,'7+
$-8670(17
PP
*5,//+(,*+7
$'-8670(17
PPPP
SEC. 2.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 2.1
p6
& 0844 327 6002 www.ccl-wetrooms.co.uk
p7
2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR
PRODUCT DETAILS
TYPICAL LAYOUTS
IMAGE DESCRIPTION SIZE PRODUCT REF
Examples showing typical wetroom layouts that can be achieved (continued).
Drainage Component 1200mm x 300mm MDC-1
with 1 trap.
Maximum flow rate
DRAINAGE COMPONENT
LAYOUT 5 LAYOUT 6 27 L/min
WET-FLOOR
50 L/min
2.1 MODULAR
2.1 MODULAR
Drainage Component 1200mm x 300mm MDC-3
with 3 traps.
Maximum flow rate
1
68 L/min
For layout 5 we recommend a maximum width For layout 6 the minimum width required is Tapered board 300mm x 1200mm MTB-03
of 1700mm, for widths greater than this use two 1700mm 22mm-11mm 500mm x 1200mm MTB-05
Drainage Components, as layout 7. 700mm x 1200mm MTB-07
1000mm x 1200mm MTB-10
1200mm x 1200mm MTB-12
1500mm x 1200mm MTB-15
TAPERED BOARD
Infil Panel 280mm x 300mm MIP-1
LAYOUT 7 LAYOUT 8
2
washers
GRILL TYPE
1300mm MFG-13
1700mm 1800mm 1400mm MFG-14
1500mm MFG-15
1200mm MWG-12
1300mm MWG-13
1400mm MWG-14
1500mm MWG-15
*The Type A – Solid Grill is supplied as standard, for alternative grill finishes please see page 6
SEC. 2.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 2.1
p8
& 0844 327 6002 www.ccl-wetrooms.co.uk
p9
2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR
WET-FLOOR
2.1 MODULAR
2.1 MODULAR
Two Drainage Components and Grills can be butted together to create a larger wetroom area.
FWM – A liquid membrane designed for FWM-8 (8kg)
EXAMPLE 1. A: 1500mm, B: 1200mm EXAMPLE 2. A: 2400mm, B: 1420mm waterproofing walls, fully compatible with Tilesafe and
EXAMPLES Screedsafe2.
EXAMPLE A A
CONFIGURATIONS: B
B
1
For full technical details please refer to section 4
For timber floors we would recommend the Tilesafe FWM should then be applied to the walls of
membrane is applied to the entire wetroom floor. the shower area plus an additional 300mm and
overlapped onto the Tilesafe Reinforcing Tape.
IN DETAIL
STEP 1
+ +
STEP 2
Select the required 1200mm Tapered Board. 2 x1200mm Tapered Board. WALL MEMBRANE
number and size of MTB-12 MTB-12 OVERLAPS
FLOOR MEMBRANE
tapered boards and
FLOOR TILES ON RAPID TAPERED
fixings. MEMBRANE FLEXIBLE ADHESIVE BOARD
REINFORCING TAPE TO
WALL/FLOOR JUNCTION
+ +
22mm
CHIPBOARD/PLYWOOD
STEP 3
Select the required 600mm Solid Floor Grill. 2 x 800mm Slotted 18mm PLYWOOD
50mm x 25mm
BATTON
floor or wall grill MFG-06/TYPE A Wall Grill.
and finish. MWG-08/TYPE B
400mm
SEC. 2.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 2.1
p10
& 0844 327 6002 www.ccl-wetrooms.co.uk
p11
2.1 MODULAR WET-FLOOR 2.1 MODULAR WET-FLOOR
$
WET-FLOOR
WET-FLOOR
2.1 MODULAR
2.1 MODULAR
WALL DRAIN
A
30 0
0 28
11
00
12
TRAP
22
Full technical data sheet available on request from our technical department.
SEC. 2.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 2.1
p12
& 0844 327 6002 www.ccl-wetrooms.co.uk
p13
3.1 LINEAR WET-DEC
Finished Product
The Linear Wet-Dec pre-formed shower base has The key feature of the Linear Wet-Dec is its two way
been developed specifically to allow the installation of fall which allows the tiling to be laid without diagonal
a wetroom on a timber floor. cuts, therefore making it ideal for use with large
format tiles.
Available in a range of sizes, the dec has a built-in
Key features
• Designed for timber floors
• Two way fall - suited to large format tiles
• 9 pre-formed sizes
• Trimmable
• Lifetime Guarantee
• Stylish linear drain
• Variable waste position
• Flow rate up to 68 L/min
• Height adjustable grill
NTE
RA
E
GUA
E
IM
ET ),:762,
E
LIF
TE
UA N
G
RA
DEC TRAP
68
Stone / Solid-infill
SEC. 3.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.1
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC
HEIGHT ADJUSTMENT
ADJUSTMENT
Triple trap Linear 900mm x 900mm End LWD 301
Wet-Dec, supplied 1200mm x 900mm Centre LWD 302
The grill is height adjustable in 1mm Additional spacers are available
with solid grill as 1200mm x 900mm End LWD 303
increments to suit tile thicknesses upon request for tiles thicker
standard1 1200mm x 1000mm End LWD 313
of 6mm to 20mm. than 20mm. *5,//+(,*+7
$'-8670(17
PPPP
Maximum flow rate 1500mm x 900mm End LWD 304
68 L/min 1500mm x 1000mm End LWD 314
1800mm x 900mm End LWD 305
1800mm x 900mm Centre LWD 306
1000mm x 1000mm End LWD 307
HOW TO SPECIFY
1
Type A – Solid Grill is supplied as standard. For alternative grill finishes please see page 4.
To specify your Linear Wet-Dec, first select the Membrane
required number of traps (depending on the required It is essential that the floor is waterproofed or ‘tanked’ using
flow rate), followed by the grill length and finally the one of the membranes in the ‘product details’ on page 6.
grill finish.
For timber floors we would recommend the Tilesafe
Example: A single trap, 1800mm x 900mm, Linear membrane is applied to the entire wetroom floor.
Wet-Dec with solid grill would have the code:
LWD 105/Type A FWM should then be applied to the walls of the
shower area and overlapped onto the Tilesafe
Reinforcing Tape.
SEC. 3.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.1
p4
& 0844 327 6002 www.ccl-wetrooms.co.uk
p5
3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC
IN DETAIL
400mm
Wall tiles
FWM
(Flexible Wall
Membrane)
Tilesafe
Membrane
Floor tiles
Tilesafe
Primer
SEC. 3.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.1
p6
& 0844 327 6002 www.ccl-wetrooms.co.uk
p7
3.1 LINEAR WET-DEC 3.1 LINEAR WET-DEC
LWD 101 - 900 x 900mm LWD 102 - 1200 x 900mm LWD 105 - 1800 x 900mm LWD 106 - 1800 x 900mm
900
900
900
900
600 300 600 600 1500 300 900 900
LWD 103 - 1200 x 900mm LWD 113 - 1200 x 1000mm LWD 107 - 1000 x 1000mm
1000
1000
900 300
900 300
700 300
1500
1500
900
1000
1200 300
1200 300
SEC. 3.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.1
p8
& 0844 327 6002 www.ccl-wetrooms.co.uk
p9
3.2 WET-DEC
Finished Product
The Wet-Dec is a pre-formed shower base The Wet-Dec has a built-in four-way fall which
developed specifically to allow the installation of a provides a consistent gradient, making it ideal for use
wetroom onto a timber floor. with mosaic tiles.
Available in a range of sizes, the Wet-Dec has a Each Wet-Dec is supplied with our height adjustable
built-in gradient ensuring that water from the shower drain which is available in a choice of stylish
shower is directed towards the drain outlet. finishes.
3.2 WET-DEC
Key features
NTE
RA
E
GUA
E
IM
ET ),:762,
E
LIF
TE
UA N
G
RA
DEC TRAP
grill FINISH
Type A
The grill is available in various Type A - Solid Grill:
• Designed for timber floors different finishes. Grained stainless steel with a 5mm
• Four-way fall - suited to mosaic tiles All are manufactured in 316 gap around the grill for a sleek
• 8 pre-formed sizes marine grade stainless steel, stylish finish.
3.2 WET-DEC
3.2 WET-DEC
• Can be trimmed by up to 50mm ensuring a stunning high
quality finish.
• Lifetime guarantee
TYPE B
• 22mm Depth Type A Solid Grill is supplied Type B - Oblong slots:
as standard unless otherwise Rows of oblong slots in a
specified. grained stainless steel finish.
TYPE S
Type S - Stone - Infill Grill:
DEC SIZES
Allows a section of tile to be
A B inserted to provide a sleek
The Wet-Dec is available in 8 sizes: % continuous look. Suitable for
• 900mm x 900mm 10-12mm stone/porcelain tiles.
• 1000mm x 1000mm Bespoke depths available to order.
• 1200mm x 1200mm
HEIGHT ADJUSTMENT
• 1200mm x 900mm
$ ADJUSTMENT
• 1200mm x 1000mm
The grill is height adjustable in 1mm Additional spacers are available
• 1500mm x 900mm increments to suit tile thicknesses upon request for tiles thicker
• 1500mm x 1000mm of 6mm to 20mm. than 20mm. *5,//+(,*+7
$'-8670(17
PPPP
• 1800mm x 900mm
27
SEC. 3.2 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.2
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
3.2 WET-DEC 3.2 WET-DEC
IMAGE DESCRIPTION DEC SIZE PRODUCT REF To specify your Wet-Dec, first select the required For timber floors we would recommend the Tilesafe
size of shower area, followed by the grill height and membrane is applied to the entire wetroom floor.
Wet-Dec, 900mm x 900mm WD10 finally the grill finish.
Maximum flow rate 1000mm x 1000mm WD11 FWM should then be applied to the walls of the
27 L/min. 1200mm x 1200mm WD12 Example: 1200mm x 900mm Wet-Dec with Stone- shower area and overlapped onto the Tilesafe
1200mm x 900mm WD20 Infill grill would be code: WD20/Type S Reinforcing Tape.
1200mm x 1000mm WD21
1500mm x 900mm WD22 Membrane
1500mm x 1000mm WD23 It is essential that the floor is waterproofed or ‘tanked’
1800mm x 900mm WD24 using one of the membranes in the ‘product details’
on page 4.
3.2 WET-DEC
waterproofing walls, fully compatible with Tilesafe.
FWM
FWM overlaps
Tilesafe Membrane
2
For full technical details please refer to Section 4
Wall tiles
FWM
(Flexible Wall
18mm Plywood
Membrane) 50mm x 25mm
Batton
400mm
Tilesafe
Membrane
Floor tiles
Tilesafe
Primer
SEC. 3.2 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.2
p4
& 0844 327 6002 www.ccl-wetrooms.co.uk
p5
3.2 WET-DEC 3.2 WET-DEC
1200 1200
600 600
320
320
900
1200
WD21 - 1200 x 1000mm WD22 - 1500 x 900mm
1500
1200
750
600
320
320
900
3.2 WET-DEC
3.2 WET-DEC
1000
WD10 - 900 x 900mm WD11 - 1000 x 1000mm WD23 - 1500 x 1000mm WD24 - 1800 x 900mm
320
320
320
320
900
1000
900
1000
SEC. 3.2 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 3.2
p6
& 0844 327 6002 www.ccl-wetrooms.co.uk
p7
4.1 RIW TILESAFE
Wall tiles
FWM
(Flexible Wall
PRODUCT DETAIL Membrane)
Tilesafe
Membrane
Floor tiles
Tilesafe
Primer
Key features
• Lifetime guarantee
NTE
RA
E
GUA
E
IM
ET
E
LIF
TE
UA N
G
RA
REINFORCING TAPE
Tilesafe Reinforcing Tape For timber floors we recommend that the Tilesafe Care should be taken to ensure the temperature is at
150mm wide self-adhesive membrane is applied to the entire wetroom floor. least 10°C. Conditioning of the membrane in a warm
waterproofing tape for sealing area prior to use will enhance its adhesion properties
critical detail such as wall junctions, For solid floors we recommend that the Tilesafe during application.
soap recesses, pipe boxing and membrane is applied to the shower area plus an
other such areas prior to tiling. additional one metre in either direction.
Roll length 7.5m.
FWM should then be applied to the walls of the
shower area and overlapped onto the Tilesafe
Reinforcing Tape.
SEC. 4.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 4.1
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
4.1 RIW TILESAFE 4.1 RIW TILESAFE
Tilesafe is a unique, pre-formed flexible self-adhesive Tilesafe will also act as an effective de-coupling
waterproof membrane that will accommodate membrane, uncoupling the floor tiles from the
differential movement between building elements, substrate and assisting in counteracting the tensions
which is the principal weakness in alternative systems. that are present from differential movement between
the substrate and the tiles.
It is, therefore, ideal for use on modular and ‘lively’
substrates, such as timber, masonry, concrete, Similarly, static, dynamic or stress cracks present in the
plasterboards, gypsum and existing ceramic or natural substrate are bridged, therefore reflective cracking Tilesafe
Reinforcing Tape
stones. Once applied Tilesafe is ready to tile immediately. through the tile is prevented.
Tilesafe is cold applied, consisting of a 2mm thick Tilesafe acts as an acoustic barrier and will improve
Wall tiles
rubberised waterproof layer, incorporating a woven the sound impact insulation value (ΔLw) of a wet FWM
glass fibre mesh on one side. It has been developed room typical floor assembly by 11dB. (Flexible Wall
Membrane)
for use prior to the fixing of ceramic tiles and natural
stone, applied using a flexible rapid-set tile adhesive, Specification M40 – Stone/Concrete/Quarry/Ceramic
which keys to the mesh. As the adhesive dries it Tiling/Mosaic.
forms a strong permanent bond through the mesh Tilesafe
and directly onto the waterproof layer. Membrane
Floor tiles
Tilesafe
Primer
TILESAFE PERFORMANCE & COMPOSITION
Membrane thickness 2mm
Joint Tape thickness 1mm
Adhesion 2N/mm
Water vapour transmission 0.5g/m² / 24 hours
Tensile strength (ASTM D1000) 12N/mm
Pull off adhesion (ASTM C907) 81N
Sheer adhesion 115N
4.1 RIW TILESAFE
¹ Data provided by an independent UKAS accredited The tests were carried-out with a fully installed floor
testing laboratory. Tilesafe was subjected to product assembly with the 2mm Tilesafe Membrane applied
validation testing using a calibrated data logger. directly to a concrete substrate, with 12mm Travertine
Tiles adhered directly to the Tilesafe Membrane.
SEC. 4.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 4.1
p4
& 0844 327 6002 www.ccl-wetrooms.co.uk
p5
4.2 RIW SCREEDSAFE
Wall tiles
FWM
(Flexible Wall
PRODUCT DETAIL Membrane)
Screedsafe
Membrane
Floor tiles
Screedsafe
Primer
Key features
NTE
RA
E
GUA
E
IM
ET
E
LIF
TE
UA N
G
RA
REINFORCING TAPE
Screedsafe Reinforcing Tape
150mm wide self-adhesive For solid floors we recommend that the Screedsafe Care should be taken to ensure the temperature is at
waterproofing tape for sealing membrane is applied to the shower area plus an least 10°C. Conditioning of the membrane in a warm
critical detail such as wall junctions, additional one metre in either direction. area prior to use will enhance its adhesion properties
soap recesses, pipe boxing and during application.
other such areas prior to tiling. FWM should then be applied to the walls of the
Roll length 7.5m. shower area and overlapped onto the Screedsafe
Reinforcing Tape.
SEC. 4.2 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 4.2
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
4.2 RIW SCREEDSAFE 4.2 RIW SCREEDSAFE
Screedsafe is a unique, pre-formed flexible It has been developed for use prior to the fixing
self-adhesive waterproof membrane that will of ceramic tiles and natural stone, applied using
accommodate differential movement between a flexible rapid-set tile adhesive, which keys to
building elements, which is the principal weakness in the fabric. As the adhesive dries it forms a strong
alternative systems. permanent bond.
It had been designed specifically for use on concrete Screedsafe should only be applied to concrete and
and screeded floors. Once applied Screedsafe is screeded floors, under no circumstances should Screedsafe
Reinforcing Tape
ready to tile immediately. Screedsafe be applied to timber floors. Timber floors
should be waterproofed with Tilesafe only.
Screedsafe is cold applied, consisting of a 1mm
Wall tiles
thick rubber modified bitumen waterproof layer, Specification M40 – Stone/Concrete/Quarry/Ceramic FWM
incorporating a woven fabric on one face. Tiling/Mosaic. (Flexible Wall
Membrane)
Full technical data sheet available on request from our technical department.
4.2 RIW SCREEDSAFE
SEC. 4.2 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 4.2
p4
& 0844 327 6002 www.ccl-wetrooms.co.uk
p5
4.3 RIW FWM
PRODUCT DETAIL
Tilesafe
Reinforcing Tape
Wall tiles
FWM
(Flexible Wall
Membrane)
Tilesafe
Membrane
Floor tiles
FWM - Flexible Wall Membrane is a flexible coating for waterproofing wall surfaces prior to the
application of ceramic tiles and natural stone in wetroom and other critical areas.
Key features
• Lifetime guarantee
• Solvent-free
• Quick and easy to apply
• Compatible with Tilesafe and Screedsafe
• Suitable for use on all commonly encountered
substrates
NTE
RA
E
GUA
E
IM
ET
E
LIF
TE
UA N
G
RA
FWM is a ready-to-use, pale blue, solvent-free, soft Allow 24 hours before tiling. Should a second coat be
paste which bonds perfectly to adhesives used for necessary, allow to dry for 2 hours between coats.
fixing ceramic tiles and natural stone.
Specification M40 – Stone/Concrete/Quarry/Ceramic
It may be used on all commonly encountered Tiling/Mosaic.
wall substrates including plasterboard, gypsum or
cementitious render, lightweight cement block and Pack Size: 8kg
marine plywood. Tilesafe
Reinforcing Tape
Colour: Pale blue
FWM should be applied using a brush or short pile
roller to give a continuous thin layer of product at Coverage: 1kg per m² /coat
Wall tiles
least 1mm thick. 8m² per 8kg pack – based on 1 coat FWM
(Flexible Wall
Membrane)
Junctions between wall and floor and all corners
should be reinforced with Reinforcing Tape.
Tilesafe
Membrane
FWM PERFORMANCE & COMPOSITION
Floor tiles
Paste density Ikg per m2 Tilesafe
Primer
Application temperature Between 5°C and 30°C
Service conditions -20°C to +50°C
Coat drying time 2 hours touch dry
Before tiling 24 hours*
Contact with water 7 days
SEC. 4.3 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 4.3
p2
& 0844 327 6002 www.ccl-wetrooms.co.uk
p3
5.1 INSTALLATION
WETROOMS UK
ABOUT US
Our extensive experience has shown us that some The expertise behind the company is based on over 30
customers desire the peace of mind of having a complete years’ experience in the waterproofing industry.
supply and installation service from the manufacturer,
therefore ensuring that responsibility for any subsequent We have worked with highly prestigious clients in the hotel,
issues lies at one point. spa and leisure industries as well as many domestic house
developers.
With this in mind we are able to offer a unique supply and
fit service through our sister company - Wetrooms UK. This experience enables us to understand your needs
to maximise space and create modern, distinctive and
Wetrooms UK Limited is an efficient, professional and beautiful wetrooms, backed up with specialist guarantees
experienced company which designs, supplies and installs and insurances.
wetrooms to the highest specification.
Key features
5.1 INSTALLATION
• Optional 10 year insured guarantee
Our bespoke design service addresses every detail of With Wetrooms UK you have the peace of mind of our
your wetroom. In addition to creating the right design for supply and installation service, backed up by our 10 year
each space, we ensure that any potential installation or insured guarantee.
maintenance issues are eliminated.
From classroom and on-site training, to site inspection and Please see a selection of our clients below.
testing, we ensure your trades people work to the same
high standards to achieve a quality finish.
Simplicity and versatility are the key attributes of a With our expertise in design and the exclusive use of
fabulous wet room and so too is the bespoke service from premium quality products, you can be confident that your
Wetrooms UK. wetroom will continue to look and function like new for
years to come.
From consultation and design through to supply and
installation, we ensure that every detail of your wetroom Meeting your expectations to create the ultimate wetroom
is absolutely right. Working with architects, design teams is our primary focus. This is why our involvement in a Hilton
and site trades, we create the wetrooms to perfectly fit project from conception to completion means there is
Through our excellent partnership with a leading
your requirements. never any compromise on quality.
bespoke glass manufacturer, Wetrooms UK has supplied
and installed the wet areas for 75 ensuite bathrooms.
We simply deliver great design and a beautiful finish.
OUR GUARANTEE
Savoy
With every installation, Wetrooms
For each one of the 110 rooms at this prestigious
UK is able to offer a 10-year hotel, Wetroom UK’s premium waterproof membrane
company guarantee. In addition was the specifier’s choice.
we can offer an insured guarantee
through Construction Guarantee
Services Ltd (CGS), which covers
your chosen installation.
5.1 INSTALLATION
For every luxurious new home developed by
• 10 year installation guarantee Octagon, our products and services are a
• Optional 10 year insured guarantee required specification.
SEC. 5.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 5.1
p2
& 0845 045 6001 www.wetroomsuk.co.uk
p3
5.1 INSTALLATION 5.1 INSTALLATION
For this prestigious London hotel, the client requested that The existing bathroom in this student accommodation
all 75 wetrooms had level access and were designed to in Manchester was in a very poor condition. All 364 pod
incorporate large format, whole tiles (without any diagonal bathrooms had leaks and the vinyl floor finish was in urgent
cuts for fitting). need of replacing.
Each wetroom was also to be fitted with a linear drain In addition, the pod floors were of 18mm plywood,
with a screed depth of only 60mm from the concrete slab. constructed on a steel box section frame, which sat on a
In addition, the client also required the rooms to be fully concrete slab with all drainage above slab level.
waterproofed including full height on the shower walls and
one metre on the wall around the bath area. The client now wanted the whole floor area to run to the
drain as pooling water had become a serious issue. Easy access
to the waste and trap was also required for cleaning purposes.
SOLUTION
Due to the existing screed depth and the requirement to The screed in the shower area was then re-laid having SOLUTION
provide level access, we used the CCL Wetrooms Linear gained the 12-15mm fall.
Screed Drain, with an adapted height-adjustable fixing bracket. The CCL Wetrooms Linear Screed Drain was installed Battens were fixed to the existing timber floor and a
RIW Tilesafe membrane was then installed to all corner- directly into the 18mm ply floor but with a ply-routed plate rapid-set, flexible levelling compound was poured to lay the
The top screed was completely removed in the floor to-corner junctions on the wall and across the entire floor, rather than the standard fixing bracket. whole room to falls. The floor was then fully waterproofed
area of the shower (1200mm x 900mm). The concrete finishing 75mm up the wall/floor junction. FWM was applied with RIW Tilesafe Membrane.
slab around the trap and waste area was removed locally to full height on the walls in the shower and bath areas -
to install the trap at the required depth. linking to the Tilesafe membrane.
5.1 INSTALLATION
SEC. 5.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 5.1
p4
& 0845 045 6001 www.wetroomsuk.co.uk
p5
5.1 INSTALLATION 5.1 INSTALLATION
SOLUTIONS
For timber joists Once the Wet-Dec was installed, the area was fully
The CCL Wetrooms Linear Wet-Dec was used for this type of waterproofed with RIW Tilesafe Membrane and FWM to the
floor construction. full height of the walls.
CROSS SECTIONS
FWM to walls
5.1 INSTALLATION
Tiles on rapid
flexible adhesive Reinforcing Tape to
Tilesafe Wall/Floor juntion
22mm Linear Wet-Dec
Chipboard/Plywood
18mm Plywood
50mm x 25mm
Batton
400mm
SEC. 5.1 WE’re HERE TO HELP PRODUCT SPECIFICATION GUIDE v2.2 SEC. 5.1
p6
& 0845 045 6001 www.wetroomsuk.co.uk
p7
Technical Support Technical Enquiries
For technical assistance please contact our experienced
technical department who will be happy to assist in the Tel: 0844 327 6002
following;
• Project design Fax: 01256 765100
• Product specification technical@ccl-wetrooms.co.uk
• CAD drawings
www.ccl-wetrooms.co.uk
• Method statements
Technical Advice
Our team of technical advisors are able to visit you to
provide a professional advisory service and assist with
project design and specification.
B ritish
S tructural
W aterproofing
WETROOMS UK
A ssociation
part of
the CCL Peace of MinD
group GROUP OF COMPANIES Guaranteed