0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
105 tayangan5 halaman
The main aim of our project is to extract energy from water which is outlet of the water pump. The turbine is coupled with generator to convert the mechanical energy into electrical energy. The main advantage of this project is use the fiber material for make the turbine so the corrosion of turbine is avoided.
The main aim of our project is to extract energy from water which is outlet of the water pump. The turbine is coupled with generator to convert the mechanical energy into electrical energy. The main advantage of this project is use the fiber material for make the turbine so the corrosion of turbine is avoided.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai DOC, PDF, TXT atau baca online dari Scribd
The main aim of our project is to extract energy from water which is outlet of the water pump. The turbine is coupled with generator to convert the mechanical energy into electrical energy. The main advantage of this project is use the fiber material for make the turbine so the corrosion of turbine is avoided.
Hak Cipta:
Attribution Non-Commercial (BY-NC)
Format Tersedia
Unduh sebagai DOC, PDF, TXT atau baca online dari Scribd
The main aim of our project is to extract energy
from water which is outlet of the water pump.
The main objective is to reducing energy
consumption and meet energy demand through this approach.
INTRODUCTION Energy consumption is largely controlled by domestic user by using this project.
Nowadays there are many hydro-electric power
stations, providing around 20% of the world's electricity.
The wastages in all type of energy resources should
be avoided or the energy wastage must be utilized in some other possible and economical way.
The main advantage of this project is use the fiber
material for make the turbine so the corrosion of turbine is avoided. WORKING:
The pumping water falls on the turbine. The turbine
shaft is connected to the generator through a gear system. The generator is connected to the rectifier (AC to DC power conversion).The generator output is stored in battery, after that we convert (DC to AC) by using inverter because we utilize the power when we need.
In this project the wasted kinetic energy of the
pumping water at the delivery end of the water pump can be utilized by connecting two quantity mini water turbine, one is used for the operation and the other is used for the standstill condition.
The turbine is coupled with Generator to convert
the mechanical energy into electrical energy. The speed of turbine is very low compared to the generator. So, to get the required speed of the generator, a gear system is needed.
The gear system is used to Regulate the speed of
Generator and also used the control arrangement to stand by turbine.
The wasted kinetic energy of the water at the
delivery end of the water pump can be utilized by connecting a small water turbine at the delivery end. The turbine is coupled with Gear system and Generator to convert the mechanical energy into electrical energy. SCHEMATIC DIAGRAM METHODOLOGY
First of all the rating of the pump is noted. (Take
7Hp for example) The turbine rating can withstand the pump rating as well as generator rating can withstand the turbine rating. The pumping water falls on the turbine before fill up the water tank. The water after utilizing the kinetic energy is delivered to sump for the home and irrigation purpose. Generator is coupled with the turbine by using gear system. The produced energy stored in the battery by the way of rectifier unit, after that can be used whenever we need. The speed of the Generator is selected depending upon the water pressure and speed of the turbine.
ADVANTAGES In future energy demand is reducing by using this technique. Absence of corrosion. Maintenance cost is reduced.