When a waste heat boiler is installed in the at low loads to prevent corrosion in
exhaust gas bypass would be used _____. the boiler
If the drive belts on an air compressor were check the operation of the
squealing during start up, you should _____. unloaders
A dirty intercooler in the ship service air higher than normal power
compressor will result in _____. consumption
Which of the following statements is correct First, weld the joints that will tend
concerning welding sequences? to contract the most.
When welding or burning with an oxy-acetylene never allow more than 15 PSIG
torch, _____. pressure in the acetylene hose