0 penilaian0% menganggap dokumen ini bermanfaat (0 suara)
22 tayangan1 halaman
This document summarizes the condition of an air tank located in Mooresville, NC. It notes that the tank's foundation has minor hairline cracks and the support coating has failed. While most components are in good condition, active crevice corrosion was noted on a flange. The inspection identifies areas in fair condition that could be improved, such as installing lock washers on anchor bolts and selecting a better grounding method.
This document summarizes the condition of an air tank located in Mooresville, NC. It notes that the tank's foundation has minor hairline cracks and the support coating has failed. While most components are in good condition, active crevice corrosion was noted on a flange. The inspection identifies areas in fair condition that could be improved, such as installing lock washers on anchor bolts and selecting a better grounding method.
This document summarizes the condition of an air tank located in Mooresville, NC. It notes that the tank's foundation has minor hairline cracks and the support coating has failed. While most components are in good condition, active crevice corrosion was noted on a flange. The inspection identifies areas in fair condition that could be improved, such as installing lock washers on anchor bolts and selecting a better grounding method.
Client: WILLIAMS GAS PIPELINES Location: MOORESVILLE, NC
Equipment ID: Unit Name: AIR TANK 2
Manufacture. No. National Board No. Construction Code:
Manufacturer: Year: Capacity/ Weight:
Design Temp: Design Pressure: M.A.W.P:
Condition (Check ONE)
ID Item Good Fair Poor NA NI Comments 1 Foundation V MINOR HAIRLINE CRACKS NOTED 2 Support Type SADDLE 3 Support Condition V COATING FAILURE EVIDENT. 4 Anchor Bolts V LOCK TYPE WASHERS SHOULD BE CONSIDERED INSTALLING 5 Ladders V 6 Platform V 7 Appurtenances V 8 Grounding V BETTER SELECTION SHOULD BE CONSIDERED 9 Relief Valves V 10 Welds V 11 Shell 11.1 Protective Coat Condition V TWO (2) MINOR LOCALIZED AREAS NOTED 11.2 Corrosion 11.3 Insulation Condition 12 Head 12.1 Head type (Elliptical, etc.) ELLIPTICAL 12.2 Protective Coat Condition V 12.3 Corrosion 12.4 Insulation / Jacket 13 Nozzles 13.1 Protective Coat Condition V 13.2 Corrosion 13.3 Insulation / Seal Condition 13.4 Bolting Condition V 13.5 Flange Condition (leaks) V ACTIVE CREVICE CORROSION NOTED