User Manual
1
Content
1. Product Introduction ............................................................................................................... 4
1.1 Ports Introduction................................................................................................................4
2. Connection Diagram ......................................................................................................................6
2.1 Connect Network.................................................................................................................6
2.2 Connect UPS ........................................................................................................................6
2.3 RS422 Add-on ......................................................................................................................7
2.3.1 Connect Temp & Humid Sensor: ...............................................................................7
2.3.2 Connect General Air Condition: ................................................................................7
2.4 DI/DO Add on ......................................................................................................................8
2.4.1 Connect Smoke Sensor: ............................................................................................8
2.4.2 Connect Sound Light Sensor: ....................................................................................9
2.4.3 Connect Leakage Sensor .........................................................................................10
2.4.4 Connect Door Contact: ............................................................. 错误!未定义书签。
3. Set Network Segment ..................................................................................................................11
4. Sign in Web Monitoring Interface................................................................................................12
4.1 Enter Default IP Address ....................................................................................................12
4.2 User Sign in ........................................................................................................................13
4.3 Interface Display ................................................................................................................13
5. Software Introduction .................................................................................................................14
5.1 Home .................................................................................................................................14
5.2 Query Status ......................................................................................................................15
5.2.1 Main Monitoring.....................................................................................................15
5.2.1.1 Parameters...................................................................................................15
5.2.1.2 Status ...........................................................................................................16
5.2.1.3 Info ...............................................................................................................16
5.2.2 Add-on sensors .......................................................................................................16
5.2.2.1 Temperature & humidity Interface ..............................................................17
5.2.2.2Battery ..........................................................................................................17
5.2.2.3 General Air Condition ..................................................................................17
5.2.2.4 4I2O (4 DIGIT INPUT/2 DIGIT OUTPUT)........................................................18
5.3 Parameter Settings ............................................................................................................18
5.3.1 Main Monitoring.....................................................................................................18
5.3.1.1 Communication Settings..............................................................................19
5.3.1.2 Alarm Threshold Settings .............................................................................19
5.3.2 Add-on sensors .......................................................................................................20
5.3.2.1 Communication Settings..............................................................................20
5.3.2.2 Enable Settings ............................................................................................20
5.3.2.3 Alarm Threshold Settings .............................................................................21
5.3.3 Network ..................................................................................................................22
5.3.3.1 IPV4 Settings ................................................................................................22
5.3.3.2 SSH Settings .................................................................................................23
5.3.3.3 IPV6 Settings ................................................................................................23
5.3.4 SNMP ......................................................................................................................24
5.3.4.1 SNMP Version Enable ..................................................................................24
2
5.3.4.2 Authorization Settings .................................................................................25
5.3.4.3 TRAP Settings ...............................................................................................25
5.3.5 E-mail ......................................................................................................................26
5.3.5.1 Mail Sender Settings ....................................................................................26
5.3.5.2 Receiver Setting ...........................................................................................28
5.3.6 SMS .........................................................................................................................28
5.3.6.1 SMS Settings ................................................................................................29
5.3.6.2 Phone Receiver Settings ..............................................................................29
5.3.7 Users .......................................................................................................................29
5.4 Remote Control .................................................................................................................30
5.4.1 Instant Control ........................................................................................................30
5.4.1.1 UPS Remote Control ....................................................................................30
5.4.1.2 General A/C Remote Control .......................................................................31
5.4.1.3 4I2O Relay ....................................................................................................31
5.4.2 Scheduled Task........................................................................................................32
5.5 History record ....................................................................................................................33
5.5.1 History event ..........................................................................................................33
5.5.2 History Data ............................................................................................................33
5.6 System information ...........................................................................................................34
5.6.1 Copyright ................................................................................................................34
5.6.2 Authorization ..........................................................................................................34
5.6.2.1 System time .................................................................................................35
5.6.2.2 Manual Update ............................................................................................35
5.6.2.3 Auto Update.................................................................................................35
5.6.2 System update ........................................................................................................36
5.6.4 Notes.......................................................................................................................36
6. Netkit Software Introduction.......................................................................................................37
6.1 Brief Introduction ......................................................................................................................37
6.2 Run Netkit software...........................................................................................................37
3
1. Product Introduction
(Picture1)
(Picture2)
(Picture3)
8.RUN: Running indicator, slow flash means running is normal, constantly on or off means
10.PW:power indicator;
11.ON/OFF:on/off button.
14: RS422 port; to extend environment monitoring like Temp & Humid sensor or AirCon
Infrared Remote Controller, etc, PS:straight through network cable is required when in using;
5
2. Connection Diagram
Connect with UPS by DB9 type cable that provided by UPS factory.(showed as below)
6
2.3 RS422 Add-on Sensors
Remark: use 568B network cable; device supports to connect 2 Temp&Humid sensors(connected in series)
Remarks: the General A/C components with 2 parts, LCD screen and infrared probe; using 568B network cable
to connect to LCD screen via RS422 port(distance between infrared probe and general A/C should be ≤5M).
Temp&Humid sensor and general A/C can be in series connection.
7
2.4 DI/DO/AI Add on
8
2.4.2 Connect 8 Analog Input
9
2.4.3 Connect 5 Digit Output:
10
3. Set Network Segment
For first time sign in, user should set the network segment first(to be same with device).
Device default IP : 192.168.0.100,
Remark: network segment should be set as 192.168.0.XXX
Command “ping”
Before sign in the web interface, we can check the default IP address to confirm whether it is available in your network by
command “ping”
Ping Pass
11
Ping Fail
After all steps finished, open a web browser(suggest IE/firefox/chrome etc), enter the device IP address
192.168.0.100
12
4.2 User Sign in
Enter initial user name and password to sign in the user interface.
Users name: Admin
Password: Admin
13
5. Software Introduction
5.1 Home
14
5.2 Query Status
5.2.1.1 Parameters
15
5.2.1.2 Status
5.2.1.3 Info
Devices supports to connect 2 Temp&Humid sensor, in this part user can check the real time temperature
humidity parameters, maximum alarm threshold, minimum alarm threshold, add-on dry
contacts(Temp&Humid sensor)
5.2.2.2Battery
This part is to check general A/C running status, temperature humidity parameter.
17
5.2.2.4 4I2O (4 DIGIT INPUT/2 DIGIT OUTPUT)
This part is to display DI/DO monitoring status, device supports 4 digit inputs(smoke, leakage, door
contact,motion,etc, the sensors will give normal or alarm signal); and support 2 digit outputs(sound light
sensor).
18
This part is to set UPS monitoring parameters, includes communications settings and alarm threshold settings.
Communications settings require to enter correct parameter which is related to UPS communication protocol;
In this interface, user should configure UPS parameters related UPS communication protocol content(select correct type,
brand, communication protocol and baud rate).
This part is to set maximum and minimum thresholds for UPS related parameters
19
5.3.2 Add-on sensors
Communication settings is for 485 bus query, users can set interval and disconnect time based on actual needs
20
user can set qty of add-on sensors and select to enable or not
Support user defined sensors’ name, maximum and minimum alarm threshold of temperature and humidity
parameters, calibration adjust and hysteresis adjust.
Battery Strings
21
This part is to enable DI/DO sensors, support user define sensors’ name, and when connected sensors which
are higher than 5V, pls tick high level.
General A/C
5.3.3 Network
This part is to set network, and no need to set DNS if connect to LAN .
22
5.3.3.2 SSH Settings
23
5.3.4 SNMP
24
5.3.4.2 Authorization Settings
Specific IP address and community are decided on SNMP platform, PS: if customer run SNMP function on PC(computer), so
the IP address is the PC address, it must guarantee for NetmateIII EXT have communication with SNMP platform)
Permissions: No permission
Readable
Readable /Writable
Receiver IP: Enter IP address of SNMP platform(same with Authorization Setting Authorized IP)
25
5.3.5 E-mail
26
Port: enter the port of email server;
User name: enter mail sender’s name or mail address
Password: enter password of sender’s mail
Sender mail: enter sender’s email address
Mail:paulfrank@gmail.com
Password:paulfrank123456
Enter Content:
Mail Identify:use ssl
Port:465
User name:paulfrank or paulfrank@gmail.com
Password:paulfrank123456
Sender mail:paulfrank@gmail.com
27
5.3.5.2 Receiver Setting
5.3.6 SMS
28
5.3.6.1 SMS Settings
In this part user can enable SMS alarm and set SMS center number, SMS center number should ask local
operator; support GSM mode.
In this part user can set SMS receivers, support to select related alarm events
5.3.7 Users
In this part , user can set multi-user (maximum 8), with Control and Check permissions
29
5.4 Remote Control
This part is to set remote control of UPS, General A/C, 4I2O Relay
This part is to set UPS self-testing, shutdown and other parameters, need UPS communication protocol
support.
30
5.4.1.2 General A/C Remote Control
This part is to set remote control general air condition on/off, adjust temp and humid value; it needs to work
with General A/C component(for detailed installation procedure, please check the user manual of general air
condition component).
31
5.4.2 Scheduled Task
In this part, user can add a schedule task for UPS test, need UPS communication protocol support.
32
5.5 History record
This part is to record events alarm occurs time, supports to select time query and export.
This part is to check history data of a device within a period, support download ( the downloaded files require
a tool to open, tool can be downloaded in this page too).
33
5.6 System information
5.6.1 Copyright
This part is to display device information like hardware/software version, IP/MAC address, product SN.
5.6.2 Authorization
This part is to display authorization status, device support UPS quantities, Temp&Humid sensor quantities,
4I2O quantities.
34
5.6.2.1 System time
This part is to display device current time and run time, with time synchronization function.
35
5.6.2 System update
If user needs to add authorization service for device, please send back currently configuration code to factory.
For upgrade to a new program,click browse to find upgrade firmware and upload,then click upgrade when
upload have finished.
5.6.4 Notes
36
6. Netkit Software Introduction
Steps:
Run Netkit software, select NMIIIV2;
Click research;
Netkit will search and display LAN connected device IP address and MAC address
If user want to modify devices IP, click network settings, then modification is available.
37