Anda di halaman 1dari 3

AISC MEMBER DIMENSIONS AND PROPERTIES VIEWER

W, S, M, HP Shapes C, MC Shapes WT, ST, MT Shapes Single Angles Double Angles Rectangular HSS

Y Y Y
k1=1 Y Y Y
k=1.11 tf=0.505 tf=0.436 b=5 t=0.349
bf=5.75 t=0.375
y(bar)=1.07 x(bar)=0.854
x(bar)=0.634 tf=0.36 d=5 t=0.375 X
d=23.6 T X d=1 X X d=3.5 h=8 X
d=5.09 X y(bar)=1.6
tw=0.395 tw=0.24 tw=0.24 b=3.5
(0, 3/8, or 3/4
bf=7.01 bf=2.6 gap) b=6

W24x55 C10x15.3 WT5x11 L5x3-1/2x3/8 2L5x3-1/2x3/8SLBB HSS8x6x3/8


A= 16.30 in.^2 A= 4.48 in.^2 A= 3.24 in.^2 d= 5 in. d= 3.5 in. h= 8 in.
d= 23.600 in. d= 10.000 in. d= 5.090 in. b= 3.5 in. b= 5 in. b= 6 in.
tw = 0.395 in. tw = 0.240 in. tw = 0.240 in. t= 0.375 in. t= 0.375 in. t= 0.349 in.
bf = 7.010 in. bf = 2.600 in. bf = 5.750 in. k= 0.8125 in. k= 0.8125 in. wt./ft. = 32.50 plf.
tf = 0.505 in. tf = 0.436 in. tf = 0.360 in. wt./ft. = 10.40 plf. wt./ft. = 20.80 plf. A= 8.97 in.^2
T= 20-3/4 in. T= 8 in. k= 0.6600 in. A= 3.05 in.^2 A= 6.10 in.^2 Ix = 79.10 in.^4
k= 1.1100 in. k= 1.0000 in. Ix = 6.88 in.^4 Ix = 7.75 in.^4 Ix = 6.31 in.^4 Sx = 19.80 in.^3
k1 = 1.0000 in. gage = 1-1/2 in. Sx = 1.72 in.^3 Sx = 2.28 in.^3 Sx = 2.38 in.^3 rx = 2.970 in.
gage = 3-1/2 in. x(bar) = 0.634 in. rx = 1.460 in. rx = 1.590 in. rx = 1.020 in. Iy = 50.60 in.^4
rt = 1.680 in. eo = 0.796 in. y(bar) = 1.070 in. y(bar) = 1.600 in. y(bar) = 0.854 in. Sy = 16.90 in.^3
d/Af = 6.66 d/Af = 8.81 Iy = 5.71 in.^4 Iy = 3.15 in.^4 ry(0) = 2.260 in. ry = 2.380 in.
Ix = 1360.00 in.^4 Ix = 67.30 in.^4 Sy = 1.99 in.^3 Sy = 1.19 in.^3 ry(3/8) = 2.390 in. Zx = 24.10 in.^3
Sx = 115.00 in.^3 Sx = 13.50 in.^3 ry = 1.330 in. ry = 1.020 in. ry(3/4) = 2.540 in. Zy = 19.80 in.^3
rx = 9.130 in. rx = 3.870 in. J= 0.119 in.^4 x(bar) = 0.854 in. ro(bar) = 2.56 in. J= 100.00 in.^4
Iy = 29.10 in.^4 Iy = 2.27 in.^4 Cw = 0.107 in.^6 rz = 0.755 in. H= 0.933
Sy = 8.30 in.^3 Sy = 1.15 in.^3 a= 1.53 in. TAN(a) = 0.486 Round HSS & Pipes
ry = 1.340 in. ry = 0.711 in. ro(bar) = 2.16 in. J= 0.15 in.^4 Y
Zx = 135.00 in.^3 J= 0.21 in.^4 H= 0.830 Cw = 0.217 in.^6 Plates t=0.322
Zy = 13.40 in.^3 Cw = 45.5 in.^6 a= 1.94 in. Y
J= 1.24 in.^4 a= 23.74 in. ro(bar) = 2.45 in. t=0.375
Cw = 3870 in.^6 ro(bar) = 4.19 in. H= --- X O.D.=8.63 X
a= 89.89 in. H= 0.884 b=12
Wno = 40.40 in.^2 I.D.=7.98
Sw = 35.70 in.^4 t= 0.375 in.
Qf = 19.20 in.^3 b= 12 in. PIPE8STD
Qw = 65.90 in.^3 wt./ft. = 15.31 plf. O.D. = 8.63 in.
Reference:
A= 4.500 in.^2 I.D. = 7.98 in.
The shapes contained in this database are a
compilation of those listed in the current AISC Ix = 0.053 in.^4 t= 0.322 in.
"Shapes Database" CD-ROM Version 3.0 (June, Sx = 0.281 in.^3 wt./ft. = 28.60 plf.
2001), as well as those listed in the AISC 9th rx = 0.108 in. A= 8.40 in.^2
Edition Manual of Steel Construction (1989). Iy = 54.000 in.^4 I= 72.50 in.^4
Sy = 9.000 in.^3 S= 16.80 in.^3
ry = 3.464 in. r= 2.940 in.
J= 54.053 in.^4 J= 145.00 in.^4
NOMENCLATURE FOR AISC MEMBER PROPERTIES AND DIMENSIONS:

A= Cross-sectional area of member (in.^2)


d= Overall depth of member, parallel to Y-axis (in.)
tw = Thickness of web of member (in.)
bf = Width of flange of member (in.)
tf = Thickness of flange of member (in.)
T= Distance between fillets for wide-flange or channel shape (in.) = d-(2*k)
k= Distance from outer face of flange to web toe of fillet (in.)
k1 = Distance from web centerline to flange toe of fillet (in.)
gage = Standard gage (bolt spacing) for member (in.) (Note: gages for angles are available by viewing comment box at cell K18.)
rt = Radius of gyration of compression flange plus 1/3 of compression web area, taken about an axis in plane of web (in.)
d/Af = Ratio of of total depth of member to area of compression flange of member = d/(b f*tf)
Ix = Moment of inertia of member taken about X-axis (in.^4)
Sx = Elastic section modulus of member taken about X-axis (in.^3)
rx = Radius of gyration of member taken about X-axis (in.) = SQRT(I x/A)
Iy = Moment of inertia of member taken about Y-axis (in.^4)
Sy = Elastic section modulus of member taken about Y-axis (in.^3)
ry = Radius of gyration of member taken about Y-axis (in.) = SQRT(I y/A)
Zx = Plastic section modulus of member taken about X-axis (in.^3)
Zy = Plastic section modulus of member taken about Y-axis (in.^3)
J= Torsional constant of member (in.^4)
Cw = Warping constant (in.^6)
a= Torsional property, a = SQRT(E*Cw/G*J)
E= Modulus of elasticity of steel = 29,000 ksi
G= Shear modulus of elasticity of steel = 11,200 ksi
Wno = Normalized warping function at a point at the flange edge (in.^2)
Sw = Warping statical moment at a point on the cross section (in.^4)
Qf = Statical moment for a point in the flange directly above the vertical edge of the web (in.^3)
Qw = Statical moment at the mid-depth of the section (in.^3)
x(bar) = Distance from outside face of web of channel shape to Y-axis (in.)
eo = Horizontal distance from the outer edge of a channel web to its shear center (in.) = (approx.) t f*(d-tf)^2*(bf-tw/2)^2/(4*Ix)-tw/2
xo = x-coordinate of shear center with respect to the centroid of the section (in.)
yo = y-coordinate of shear center with respect to the centroid of the section (in.)
ro(bar) = Polar radius of gyration about the shear center (in.) = SQRT(x o^2+yo^2+(Ix+Iy)/A)
H= Flexural constant, H = 1-(xo^2+yo^2)/ro(bar)^2)
LLBB = Long legs back-to-back for double angles
SLBB = Short legs back-to-back for double angles
STD = Standard weight (Schedule 40) pipe section
XS = Extra strong (Schedule 80) pipe section
XXS = Double-extra strong pipe section

Anda mungkin juga menyukai