120W MONOCRYSTALLINE
FOLDING SOLAR BLANKET
1X ANDERSON TO BATTERY
CLIPS CABLE & 4.4M
ANDERSON TO ANDERSON
EXTENSION LEAD
Voltage 16.6V
USB Output 5V / 3A
Dimensions 150 x 78 x 35 mm
Weight 150g
• Find a suitable location to unfold the Solar Blanket, away from sharp objects, liquids and other
hazards that could damage your solar blanket. Ensure there is sufficient space for the Solar Blanket
to be spread out fully.
• Whilst unfolding, take care with the panels making sure they do not bend.
When connecting the Solar Blanket with the Solar Charge Controller, the order in which you connect the
components is important so that the Solar Charge Controller will show the correct information. Along with
this, connecting the components in the wrong order could damage your controller.
1. First connect the Solar Charger Controller with the lead acid battery. Using the Anderson cables
supplied with the unit.
2. Secondly, connect Solar Charger Controller with the Solar Blanket
3. Finally, connect the load that you are wishing to power off the Solar Blanket.
To disassemble the components, make sure to follow the steps in in the reverse order (3, 2 to 1).
NEVER STORE YOUR SOLAR BLANKET WITH THE BATTERY LEADS CONNECTED TO THE BLANKET.
WARRANTY
WARRANTY PERIOD:
Full 12 month warranty from date of purchase against all manufacturing defects.
TO MAKE A CLAIM, PLEASE ENSURE YOU RETAIN YOUR SALES RECEIPT OF PURCHASE
CALL 1800 88 39 64