Page 1 of 2
CONCRESIVE 1020 SPECIAL is a two component away from children and animals. Reseal containers
product consisting of a base and reactor. The after use. Do not reuse containers for storage of
components are pre-weighed and should not be split consumable item. For further information refer to the
or divided. Mixing of the base and reactor should material safety data sheet. MSDS available on demand
continue for at least 1-2 minutes to produce a fully or on BASF construction chemicals web site.
blended uniform material.
Note
Application All BASF Technical Data Sheets are updated on
CONCRESIVE 1020 SPECIAL is applied by brush or regular basis; it is the user's responsibility, to obtain
roller and worked well into the surface. Apply the most recent issue.
according to stated coverage.
Field services where provided, does not constitute
supervisory responsibility, for additional information
CONCRESIVE 1020 SPECIAL should be overlaid
contact your local BASF representative.
whilst it remains tacky. If allowed to cure re-apply
within 24 hours. Disclaimer
Coverage Whilst any information contained herein is true,
Coverage will vary according to the nature of the accurate and represents our best knowledge and
substrate. experience, no warranty is given or implied with any
recommendations made by us, our representatives or
CONCRESIVE 1020 SPECIAL covers approximately 4 distributors, as the conditions of use and the
- 6 m²/kg competence of any labour involved in the application
are beyond our control.
Calculated usage assumes constant application
thickness on a regular substrate.
Packaging
CONCRESIVE 1020 SPECIAL is available in 1kg. pack.
Equipment care
Remove CONCRESIVE 1020 SPECIAL from tools and
equipment using CLEANING SOLVENT NO. 2
immediately after application.
Safety precautions
As with all chemical products, care should be taken
during use and storage to avoid contact with eyes,
mouth, skin and foodstuffs (which can also be tainted
with vapour until product fully cured or dried). Treat
splashes to eyes and skin immediately. If accidentally
ingested, seek immediate medical attention. Keep
PDS Ref. no. :Ccr1020S/02/1206
BASF Construction Chemicals (India) Private Limited
C-68, MIDC, Thane Belapur Road, Turbhe, Navi Mumbai - 400 613 India
Tel: +91 22 27619992/3, Fax: +91 22 27619242
e-mail: basfcc@vsnl.net www.basf-cc.co.in Page 2 of 2