HCR1200
Series II
Series II Rock Drills Equipped with Tier III EPA Compliant Engines.
Drill faster and straighter
with the HD712 drifter
The Furukawa HD712 drifter combines powerful
penetration with agility and easy operation. Equipped
with features that maximize efficiency, the HD712 drifter
sets the standard in high-performance drilling:
Low-emission Tier III engines offer low fuel consumption and meets US exhaust emissions regulations.
Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a
single lever. Rods can also be indexed in the rack to distribute wear evenly and reduce costs.
HCR1200 ED features 12' rods with extendable boom for increased drill pattern.
Heavy-duty undercarriage – featuring a pentagonal section design to reduce dirt build-up and track wear
– ensures strength and durability.
High-output compressor increases flushing air, provides faster drilling and decreases bit wear.
Reliable dust control system increases suction capacity and provides
effective pre-cleaner to reduce escape of drilling dust. An optional
dust suppression system is available for difficult drilling conditions.
Angle indicator for quick and easy drilling alignment.
ED
HCR1200 Series II
Dimensions in Inches US Standard Metric
Boom lift angle +0° Overall Weight (A) *1 32,414 lb 14,700 kg
Boom slide 1200
Oscillating angle 7.8° 225.2 1.8
Rotary angle +90° Overall Weight (B) *2 33,516 lb 15,200 kg
Performances
11.9 66.3 90.3
R2
6
R2
.5
6.
5 Maximum Grade of Hill Climb 57.7% (30 deg)
8.5
Boom slide 0
Oscillating angle 2.5° Oscillating Angle +-7.5 deg
Rotary angle 0°
.1
22
Ground Contact Pressure 11.4 psi 78.5 kPa
Model HD712
Mass 485 lb 220 kg
Boom lift angle +17°
21.8
33.8
Boom slide 1200
Overall Length 3'7" 1,100 mm
145.8
Oscillating angle 0°
138.4
Drifter
Rotary angle +90° R26.5
R1 Boom swing center Overall Width 1'3" 380 mm
103.6
R1 30
22.8
R21
4.2 Overall Height 1' 300 mm
35° Number of Blows 2,300 bpm 2,300 min-1
R227
11.8
Number of Revolutions 0-190 rpm 0-190 min-1
Make & Model Cummins QSB6.7
5°
33.6
Engine
32.5
R26.5
Type Water-cooled Direct Fuel Injection Turbo Charged Diesel Engine
25.4
6.5
14.8
Equipment
Hydraulic
Machine center
Center of center shaft Fix Displacement Pump Gear Pump X3
13 80.8
Drive Motor Hydraulic Motor with Reduction Gear
Boom
Boom Swing Angle: Right/Left 35/5 degree
Vertical Drilling
Boom Slide Length 3'11" 1,200 mm
on Horizontal Plane
Guide Rotary Angle 90 degree
Model GH832-30
Vertical Drilling Overall Length 25'7" 7,800 mm
Guide Shell Feed Length 15'2" 4,620 mm
Feed Length (with RP) 14'7" 4,440 mm
Guide Slide Length 3'11" 1,200 mm
Guide Swing Angle:Right/Left 30/90 degree
Guide Tilt Angle 170 degree
117" 2975mm
Voltage DC24V