When a movement is
detected, the
microprocessor will
generate a command with
an alert message to
the GSM module to be sent
to the driver as an
SMS text message.
To detect sound or Detect motion that Success Uses GSM, where it
voice and any performed by a person and can be used to
movement made can detect any sounds that communicate with
by the children that produced from inside the people even at great
had been left car. distances.
behind in a vehicle.
The PIR motion will set so
it will detect the motion in
the specific range only to
avoid from any disturbing
from outside of the car.
Child In
Car Alarm To detect voice, this
(Hashim
System system used condenser
et al.,
Using microphone and it also will
2014)
Various set to detect voice in
Sensors specific range.
After it generates
command, the message
will be send to the driver
through their mobile
phone.
To design a Detects the temperature of Success Can reduce the risk of Needs too
notification or an the child. heatstroke among many
alert to parents by child. sensors.
using smartphone. After the driver releases Quite
Babycare the seat belt, the system expensive
Alert will check the pressure pad and not
System For (Khamil, or a secured child seat lap everyone can
Prevention Rahman, belt, whether the child is afford to buy
of Child & still remain seated in his the system.
Left Gambilok, car seat.
In A 2015)
Parked If yes, it will notify the
Vehicle caregiver instantaneously.
The alarm would include a
calm audio output such as
a lullaby, a song, or a story.
The system can be
integrated into the OEM
features to provide an alert
escalation process using a
local alert, a vehicle alert,
a wireless alert and
specifically a 911 alert.
To develop aUses various sensing Success It also allows us to
reliable system, technologies to establish customize the type of
targeting carvital signs and the alerts such as sending
owners who are environment of the emails, SMS or push
caretakers, tosubject. notifications.
reduce such
avoidable deaths to The sensor unit detects
innocent children. external signals that could
represent human life or
danger and translates them
Child Heat
into analogue current or
Injury
voltage waveforms.
Prevention
(Karaman
in Heated
et al.,n.d., This information is passed
Locked
2015) to the processor that
Cars
actively measures the
collected signals against a
benchmark table to
determine if life and/or
danger are present.
However if there is no
action taken from the
smartphone, the system
will continue to check the
temperature inside car,
until it reaches 95°F, the
system itself will react and
car's windows will be
opened automatically.
At last, system will be
reset and started from the
beginning.
To develop a low Detect by voice. Success This baby monitor will Only send
cost audio based save time for parents, the
baby monitor The system will start to provides a secure and notification
based on Arduino process according to the safety room for the to Bluetooth
UNO babies’ crying voice until baby even though phone only.
microcontroller via the parents receive the parents not around
Bluetooth. alarm of babies crying them.
(Nur from their Android
Arduino
Syafiqah smartphone.
And
Binti
Android
Mohamad Baby crying will be the
Based Baby
Said input that will be detected
Monitor
,2016) by the microphone, then
the voice will transmit the
data signal into the
Arduino UNO and after
that, the Bluetooth HC-05
module will transfer the
alert data to smartphone
app to alarm parents.
Developme To provide a Detect by voice, motion & Success The system acts The system
nt of comprehensive and temperature sensor. automatically to help needs too
Comprehen effective detection child if the parent or many
(Sulaiman
sive system. The system starts in five caregiver do not sensors.
et al.,
Unattended minutes after the vehicle is provide any help to
2017)
Child in its parking situation. save him/her.
Warning
And The vehicle is considered
Feedback to be in parking situation
System In based on several
Vehicle conditions such as ignition
engine is central lock is on
or handbrake is locked or
ignition engine is off.
If Engine is ON and
doesn’t monitor anything,
then it should be engine
status indicate with ‘S’
code.