Pressure Controls
Style T Pressure Controls - Copper Alloy Bellows
O Copper alloy bellows may be used on water or air, and other liquids or gases not corrosive to this alloy.
@ Transients (pulses) can occur in a system prior to reaching a steady-state condition. Surge pressures within published values generated
during start-up or shut-down of a machine or system, not exceeding 8 times in a 24 hour period, are negligible.
© The combined Type 7&9 and 4&13 Hazardous Gas and Dust service enclosure is supplied with special gasket and O-ring seal to
diminish/exclude moisture, fluids, and dust from entering the enclosure. Enclosures rated 7&9 only are not designed to restrict moisture from
entering the enclosure, which is common to outdoor service.
IEC 337-1
IEC 337-1
Maximum Maximum Rated Operational Current
Operational Utilization Continuous Make Break
Category Volts
Voltage Ue Current Ith
5
Ue
72- 120 AC
-3E-30A
^3t>
360VA
AC150 AC-11
5 24-72 AC 30A 5A
DC150 DC-11 — 11 5-240 DC 40VA 40VA
Note: NEMA does not rate contacts to switch low voltage and current. Bulletin 836T Style T and D Pressure Controls are supplied
with silver contacts. The devices are designed to deliver high force snap action to the contacts. This provides exceptional contact
fidelity at 24V DC I/O card current level entry when the integrity of the enclosure is maintained.
Allen-Bradley
16-8
Bulletin 836T
Pressure Controls
Ordering Information
How to Order
Step 1: Basic Device —
Select a catalog number for the basic device See pages 16-12 thru 16-17.
Step 2: Modifications —
If required, add the appropriate modification
suffix code(s) to the catalog number of the basic device. . See pages 16-18 and 16-19.
Step 3: Accessories —
If required, select appropriate accessories Seepage 16-23.
Step 4: Factory Options —
Factory Set Pressure Controls See page 16-25.
Style of Device:
T= Pressure Control
D= Pressure Difference Control Contact Block Type:
2-Circuit Contact Block (Standard)
4-Circuit Contact Block (when X40 is specified)
Operator Type:
Copper Alloy Bellows Letter-Enclosure Type:
Type 316 Stainless Steel Bellows J = 1, 4 & 13 Industrial Use
Piston With or Without Seal E = 7 & 9 a n d 4 & 1 3 Combined
Hazardous Locations
Pressure Specifications:
Adjustable Operating Range
Adjustable Differential
Maximum/Minimum Line Pressure
Max. Occasional Surge Pressure
See SpecificationsTables
Allen-Bradley 16-11
Bulletin 836T
Pressure Controls
Technical Data
O Corrosive liquids and gases must be compatible with Type 316 Stainless Steel Bellows.
Note: Pressure Difference Controls are supplied with either copper alloy or stainless steel bellows. See Ordering Information on page
16-11 for details.
16-10 Allen-Bradley
Bulletin 836T
Pressure Controls
Modifications
Ordering Modifications
Modifications are ordered by adding the appropriate modification suffix code to the catalog number of the basic device. Add suffix
codes to the catalog number in descending order.
Modifications
Item Description Suffix Code #
Modifications
Item Description Suffix Code
*
5-Pin Mini-Type
Select the desired pin wiring configuration from the diagrams on See pages 16-20 thru 16-22.
Receptacle No
pages 16-20 thru 16-22. Rated at 8A 600V.
Pilot Light
5-Pin Mini-Type Select the desired pin wiring, pilot light wiring, and voltage from the
Receptacle With diagrams on pages 1 6-20 thru 1 6-22. Includes receptacle and pilot See pages 16-20 thru 16-22.
Prewired Pilot Light light. Rated at 8A 600V.
Select desired pin wiring configuration from the diagrams on pages
1 6-20 thru 1 6-22. Add number "1 " to the Suffix Number immediate-
5-Pin
ly following the letter "X". Example: "X19" becomes "X119".
Micro-Connect
Rated at 3A 300V. See pages 16-20 thru 16-22.
Receptacle Without
Pin/Wiring Code: 1 - Red with White Tracer, 2 - Red,
Pilot Light
3 - Green (Gnd), 4 - Red with Yellow Tracer, 5 - Red with Black
Tracer.
Select the desired pin wiring configuration and pilot light (X9 or
X15, see above for specifications) from the diagrams on pages
5-Pin 1 6-20 thru 1 6-22. Add number "1 " to the Suffix Number immediate-
Micro-Connect ly after the first letter "X". Example: "X21 X9" becomes "X121 X9".
See pages 16-20 thru 16-22.
Receptacle With Rated at 3A 300V.
Prewired Pilot Light Pin/Wiring Code: 1 - Red with White Tracer, 2 - Red,
3 - Green (Gnd), 4 - Red with Yellow Tracer, 5 - Red with Black
Tracer.
Additional Optional
Receptacles and Consult your nearest Allen-Bradley sales office for assistance.
Wiring
Cross Reference Table - Wiring Diagram/Suffix Code (See pages 16-20 thru 16-22)
Pilot Light Contact Reference Bulletin
Receptacle Wiring Suffix Pilot Light Suffix
Configuration 802M Wiring
X19 None None J1
X20 None None J9
X21 X9O© N.C. J1
X21 X15®€> N.C. J1
X22 X9O© N.O. J1
X22 X15©© N.O. J1
X23 X90© N.C. J9
X23 X150© N.C. J9
X24 X9O© N.O. J9
X24 X150© N.O. J9
X81 X9O None None
X81 X15© None None
O 120V AC neon glow pilot light, current rating is 1.0 milliamps, nominal.
© 24V DC LED pilot light, current rating is 22 milliamps, nominal.
© In the diagrams shown on pages 16-20 thru 16-22, the pilot lights are wired across the terminals and in series with the load. Pilot light is "OFF"
when the load is energized, "ON" when the load is de-energized. For simultaneous energization of the load and pilot light, or other optional
wiring configurations, consult your nearest Allen-Bradley Sales Office.
O Bulletin 836T Suffix "X81" Wiring - Load and pilot light simultaneously energize when contacts displace (contact terminals 3 and 4 close) at a
predetermined pressure setting.
c
(70.6)
0.27 Dia.
(6.7)
-+ 2.72
(69.1)
^- 2.5 ,.
~ (63.5)
co\ 'A
i
Mtg. Holes
X
^L- > *
ri i 0.53 Dia.
(13.5) f
CTBR.
r \\
272
<
\5
• \
n yi ;
r~ <s>
(69.1) 0.54 D a. 2.72 I 72 0.86 I
(13.5
. |CTBF
3,
•. t (69.1)
( J3.7) (21-8) t
i •
? uA-*3-
OT r ~\, I1 (?)
V2-14 /" ^
N.P.T.F. V4-18
N.P.T.F.
20mm
Pg13.5 ft
V2-14
/ I
1.72 0.86
N.P.T.F.
20mm \ \ Y
(43.7) (21.8)
I
sT
* ^
2.72
(69.1) 0.53 Dia
(13.5)
1 ' CTBR. 8 63
•• (178)
(219.2)
V2-14
N.P.T.F. ,1 ^ Drain
20mm
Pg13.5 T ^ 1
/8-27
N.P.T.F.
T] CC :,
.44 Dia.
(11.2)0
Mtg. Holes ± rrn
3
/8-1 8
J ! I I j Qty.2
SL\ . / ,l.
(9.5 )
N.P.T F.
1.7 2 T I tiT 1.38
(3 i.1)
N
>-
E3i-^
0.86 .50 -*. k t
(43 7) (21.8) ' .84
(12.7)
(71 1)
2.80 4.69
Approximate Shipping Weight 3-1/2 Ibs. (1.6 kg) ; - 5, 5
(141 .0)
(21.3) —-
Typ.
(119.1)
_ 1.69
(42.9)
2.69
(68.3)
V-14N.P.T. .-.Si
Conduit Connection -_^
i
Catalog Number
t
jf ITffl SM\
P
836T-T300J 836T-T350J .88 ———^-i—j— -_J
V8"-27 N.P.T. -
836T-T301J 836T-T351J (22.4) r
•69 Oil Drain Connection ©i
836T-T302J 836T-T352J (17.5) Plugged When " :
// r©i
"
836T-T303J 836T-T353J Not in Use V'-18 N.P.T.F
836T-T400J
Approximate Shipping Weight 9 Ibs. (4.0 kg)
16-26 Allen-Bradley
Bulletin 836T
Pressure Controls
Technical Data
Indicating Scale
(Approximate Trip Setting)
UL CSA
File Number Guide Number File Number Class
Bulletin 836T E 14842 NKPZ LR1234 3211-03
E53048 (Haz. Loc.) NOWT LR1 1924 (Haz. Loc.) 3218-05
Hazardous Location Enclosure not CE compliant.
Allen-Bradley 16-5
Bulletin 836T
Pressure Controls
Product Overview
Description
Bulletin 836T Pressure Controls are con- friction-free mechanism provides consis- Bulletin 836T Pressure Controls are of-
trol circuit devices designed to meet the tent operation regardless of mounting fered in a variety of styles to fit a wide
traditional requirements of the transporta- position. Devices are designed to allow range of applications. The devices are
tion, machine tool, and other heavy duty easy adjustment of pressure settings. available with either a Type 1, 4 & 13, or
industries. Allen-Bradley Bulletin 836T 7 & 9 and 4 & 13 combined enclosure.
Pressure Controls can be used in pneu- Allen-Bradley Bulletin 836T Pressure They are available with 2-circuit or 4-cir-
matic and hydraulic applications. The dia- Controls are used in many types of ap- cuit contact blocks. Accessories and mod-
phragm and copper alloy bellows actua- plications with adjustable ranges from 30 ifications are available to tailor the devices
tors can be used with air, water, oil, vapor inches mercury vacuum to 5000 psi. They to meet most application requirements.
and other non-corrosive gases and liq- can be used to control pneumatic sys-
uids. Type 316 stainless steel bellows are tems, to maintain a pressure tank within a Applications
available for the more corrosive gases, va- preset and constant pressure range. They • Machine Tools
pors, and fluids. A rugged cast iron cylin- can be used to detect over-pressures of
der and hardened steel piston assembly is gases and liquids to prevent damage to • Machine Hydraulic Pressures
used for the higher pressure coolant and valuable equipment. Pressure controls • Material Clamping Fixtures
hydraulic oil applications. The controls can also detect low pressure to protect
equipment from loss of coolants and lu- • Lubricant and Coolant Pressures
feature snap action precision switches
equipped with silver contacts. A relatively brication. • Compactor Ram Pressures
• Air Compressors
Style T Style D
• Independently Adjustable Operating Range • Independently Adjustable System Difference Range
and Differential and Differential
• Single bellows or piston operation • Two bellows operation, one bellows connected to each system
Copper Alloy Bellows Copper Alloy Bellows
• 1/4" N.P.T.F. female pipe connection • 1/4" N.P.T.F. female pipe connection
• SAE 7/16-20 UNF-2B Thread O-ring Boss Seal • Adjustable System Difference Range - 1 to 70 psi
• SAE 9/16-18 UNF-2B Thread O-ring Boss Seal • Maximum Line Pressure - 600 psi
• Adjustable Operating Range - 30" Hg Vac. to 650 psi • Occasional Surge Pressure - 650 psi
• Maximum Line Pressure - 1300 psi
• Occasional Surge Pressure - 1600 psi
Type 316 Stainless Steel Bellows Type 316 Stainless Steel Bellows
• 1/4" N.P.T.F. female pipe connection • 1/4" N.P.T.F. female pipe connection
• Adjustable Operating Range - 30" Hg Vac. to 375 psi • Adjustable System Difference Range - 1 to 70 psi
• Maximum Line Pressure - 600 psi • Maximum Line Pressure - 500 psi
• Occasional Surge Pressure - 600 psi • Occasional Surge Pressure - 500 psi
Piston
• 3/8" N.P.T.F. female pipe connection
• SAE 7/16-20 UNF-2B Thread O-ring Boss Seal
• SAE 9/16-18 UNF-2B Thread O-ring Boss Seal
• Adjustable Operating Range - 40 to 5000 psi
• Occasional Surge Pressure - 15,000 psi
16-2 Allen-Bradley
NEMA Enclosures
Important
Type 1 enclosures are intended for indoor use primarily to provide a Type 3R enclosures are intended for outdoor use primarily to provide
degree of protection against contact with the enclosed equipment in a degree of protection against falling rain, and to be undamaged by
locations where unusual service conditions do not exist. The the formation of ice on the enclosure. They are designed to meet rod
enclosures are designed to meet the rod entry and rust-resistance entry, rain ➌, external icing ➋, and rust-resistance design tests. They
design tests. Enclosure is sheet steel, treated to resist corrosion. are not intended to provide protection against conditions such as dust,
internal condensation, or internal icing.
Type 1 Type 4
Flush Mounting Watertight
Stainless Steel
Important-8
NEMA Enclosures
ENCLOSURES
Refer to the brief descriptions below for the various types of enclosures NOTE: Enclosures do not normally protect devices against
offered by Allen-Bradley. See pages Important-11 and Important-12 conditions such as condensation, icing, corrosion or
for selection criteria. For definitions, descriptions and test criteria, contamination that may occur within the enclosure or enter via
see National Electrical Manufacturers Association (NEMA) Standards the conduit or unsealed openings. Users must make adequate
Publication No. 250. Also see individual product listings within the provisions to safeguard against such conditions and satisfy
Allen-Bradley catalog for available enclosure types and for any themselves that the equipment is properly protected.
additional information relating to these descriptions.
Type 6P
For Prolonged Submersion at a Limited Depth
Type 7 Type 12
For Hazardous Dusttight
Gas Locations Industrial Use
➊ Evaluation criteria: Undamaged after ice buildup during specified test has melted (Note: Not required to be operable while ice-laden).
➋ Evaluation criteria: No water has entered enclosure during specified test.
Important-9